Server Services won't re-start (unkown error)

I have an installation of 10.4.11 server with a recurring problem. After a period of time (usually months, sometimes weeks) various services such as FTP or WEB will quit and not restart.
I am flummoxed as to how to troubleshoot this problem. The error reported is (unknown error) with instruction to report this 'unknown error' to the server admin. This happens repeatedly and the only solution I have found is just rebuilding the install from the ground up each time this happens which is a very time-consuming process.
Suggestions welcome.
Message was edited by: Grady Lucas
Message was edited by: Grady Lucas

Similar Messages

SQL Server Service won't start on SQL Server 2008

Hi everyone,
I'm having trouble starting SQL Server service after stopping and starting the service. Before this happened, I created a Stored Procedure for marking all tables at once along with a maintenance plan for differential backup on all my databases based on the
recommendation from this link, http://msdn.microsoft.com/en-us/library/ms253070.aspx.
When I realized that the differential backup failed with some databases displaying (Restoring...) post-fix to the database name, I decided to stop SQL Server service and start it up. That is when I won't be able to start the service again.
Is there a fix for starting the SQL Server service? Any help is very much appreciated.
Additional information:
- With administrator permission granted.
- Service Pack 1 for SQL Server 2008 installed.
- Using default database instance.
- Tried C:\Program Files\Microsoft SQL Server\MSSQL.....\Binn>net start MSSQLSERVER /T3608 ( return msg: System error 5 has occurred. Access is denied.
- When I start SQL Server service, I keep getting this dialog msg:
"Windowns could not start the SQL Server (MSSQLSERVER) on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 1814."
The event log does not explain or provide any hint on how to fix the problem.
- Log msg:
2010-07-22 10:30:25.09 Server      (c) 2005 Microsoft Corporation.
2010-07-22 10:30:25.09 Server      All rights reserved.
2010-07-22 10:30:25.09 Server      Server process ID is 6076.
2010-07-22 10:30:25.10 Server      Authentication mode is MIXED.
2010-07-22 10:30:25.10 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2010-07-22 10:30:25.11 Server      This instance of SQL Server last reported using a process ID of 5708 at 7/21/2010 3:27:01 PM (local) 7/21/2010 10:27:01 PM (UTC). This is an informational message only; no user action is required.
2010-07-22 10:30:25.11 Server      Registry startup parameters:
    -d C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\master.mdf
    -e C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Log\ERRORLOG
    -l C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
2010-07-22 10:30:25.14 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2010-07-22 10:30:25.14 Server      Detected 4 CPUs. This is an informational message; no user action is required.
2010-07-22 10:30:25.23 Server      Using locked pages for buffer pool.
2010-07-22 10:30:25.43 Server      Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2010-07-22 10:30:25.73 Server      Node configuration: node 0: CPU mask: 0x000000000000000f Active CPU mask: 0x000000000000000f. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2010-07-22 10:30:25.81 spid7s      Starting up database 'master'.
2010-07-22 10:30:26.14 spid7s      CHECKDB for database 'master' finished without errors on 2010-07-19 21:15:02.823 (local time). This is an informational message only; no user action is required.
2010-07-22 10:30:26.18 spid7s      Resource governor reconfiguration succeeded.
2010-07-22 10:30:26.18 spid7s      SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2010-07-22 10:30:26.18 spid7s      SQL Server Audit has started the audits. This is an informational message. No user action is required.
2010-07-22 10:30:26.19 spid7s      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
2010-07-22 10:30:26.28 spid7s      SQL Trace ID 1 was started by login "sa".
2010-07-22 10:30:26.29 spid7s      Starting up database 'mssqlsystemresource'.
2010-07-22 10:30:26.31 spid7s      The resource database build version is 10.00.2531. This is an informational message only. No user action is required.
2010-07-22 10:30:26.43 spid10s     Starting up database 'model'.
2010-07-22 10:30:26.43 spid7s      Server name is 'XXXXXXXXXXXXXX'. This is an informational message only. No user action is required.
2010-07-22 10:30:26.47 spid10s     The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run.
2010-07-22 10:30:26.47 spid10s     Error: 927, Severity: 14, State: 2.
2010-07-22 10:30:26.47 spid10s     Database 'model' cannot be opened. It is in the middle of a restore.
2010-07-22 10:30:26.59 spid10s     Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in
the event log that may indicate why the tempdb files could not be initialized.
2010-07-22 10:30:26.59 spid10s     SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.

Hello,
Could you please copy the model.mdf and modellog.ldf from
C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Binn\Templates
To
C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA
Rebuilding the system databases you will lose lose logins, jobs, SSIS packages. You may have to restore or attach user databases.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

CVP 9.0 (1) - VXML Server service is not getting started

Hi
I am installing a CVP 9.0(1) in my lab and the VXML Server service is not getting started; It throws the below error.
From CVP Error logs, I see the following the snippets.
13: 172.16.13.147: May 29 2013 11:53:55.937 -0700: %CVP_9_0_Infrastructure-0-START: No Subsystems have been started. Have you configured your server yet? ; Make sure <CVP_HOME>\conf\propFileList.properties is loading "system" and that <CVP_HOME>\conf\system.properties lists at least one subsystem to load. [id:1033]
Could somebody please suggest on how to fix it.
Thanks,
Jayaprakash

It should run in Evaluation mode
Each VXML Server requires a separate license, even if the software is installed on the same machine. The
VXML server license is tied to the IP address. If you change the IP address of the server, then you must request
for another license.
When you start VXML Server without an active license (for example, the license is missing, invalid, or
expired) it logs a message to the application server console and startup log to indicate that you need to activate
the license. However, you can still use an unlicensed installation of VXML Server with up to 30 simultaneous
sessions for evaluation purposes. To utilize more simultaneous sessions, activate a valid license of VXML
Server.
You need to look for logs here startup error (C:\Cisco\CVP\VXMLServer\logs) and the OAMP logs
Regards,
Senthil

Error 1069 - Server Service won't start

I'm getting the following erro message when I try to start Central Pro Server:
Could not start the Adobe Central Output Server Service on local computer.
Error 1069 The Service did not start due to logon failure.
I checked the services and it won't allow me to start this manually... any suggestions would be greatly appreciated!

From the text error as well as the inability to manually start the server I'd suspect that the user-id or password defined on the Log On tab is incorrect. If you are on a Windows network don't forget that if you are using a Domain user-id that the domain name has to be included (DOMAIN\user-id).

WDS Server Service won't start - 'An error occurred trying to start the Windows Deployment Services Server.'

I'm having issues installing starting the WDS server service on Win 2008 R2, this is happening on multiple (all 2008 R2) systems on this domain so I'm beginning to think it's either AD or network related, in event viewer I get the following error.
'An error occurred trying to start the Windows Deployment Services Server.'
Error Information: 0x0906
EventID : 257
single domain, single forest, 2008 R2 functional level, both system are virtual plugged into same vswitch on a flat network.
any ideas what might be the issue? I've never had an issue getting this working on many occasions before today and I've come to many a dead end looking at other articles thus far...
With WDS tracing enabled I get the following error information:
[4304] 09:22:11: ===>Starting logging of module [WDSServer]
[4304] 09:22:11: [UDPPorts] Policy: 1, Dynamic Port Range: 64001-65000.
[4304] 09:22:11: [RPC] Using Tcp Port 5040 for Rpc Calls.
[4304] 09:22:11: [RPC] Client Impersonation Logging=Disabled
[4304] 09:22:11: [RPC] Host Name: sccm.domain.local
[4304] 09:22:11: [RPC] NTLM/Kerberos Spn: ldap/sccm.domain.local
[4304] 09:22:11: [RPC] Initialized
[3756] 09:22:11: [RPC] Server Started.
[4304] 09:22:11: [BINLSVC][RPC][Ep={5F4FB9F0-C0E3-41C1-AA00-9A7C690AC3A3}] Registered
[4304] 09:22:11: [BINLSVC] Provider Initialized.
[4304] 09:22:11: [WDSDDPS][RPC][Ep={FA0A27E1-C2BA-4B3B-94B2-025E82FFAA6D}] Registered
[4304] 09:22:11: [WDSDDPS][RPC][Ep={011D24AC-CB3A-4739-A339-5D2E1B5306CE}] Registered
[4304] 09:22:11: [51][WDSDDPS] [d:\w7rtm\base\ntsetup\opktools\wds\ddp\server\ddpprovider.cpp:196] Expression: , Win32 Error=0x906
[4304] 09:22:11: [WDSDDPS][RPC][Ep={FA0A27E1-C2BA-4B3B-94B2-025E82FFAA6D}] Closed
[4304] 09:22:11: [WDSDDPS][RPC][Ep={011D24AC-CB3A-4739-A339-5D2E1B5306CE}] Closed
[4304] 09:22:11: [d:\w7rtm\base\ntsetup\opktools\wds\wdssrv\server\src\wdsprovider.cpp:144] Expression: , Win32 Error=0x906
[4304] 09:22:11: [WDSDDPS] Initialization Failed (rc=2310)
[4304] 09:22:11: [d:\w7rtm\base\ntsetup\opktools\wds\wdssrv\server\src\wdsprovhdl.cpp:172] Expression: , Win32 Error=0x906
[4304] 09:22:11: [WDSDDPS] Deleted.
[4304] 09:22:11: [d:\w7rtm\base\ntsetup\opktools\wds\wdssrv\server\src\wdsservice.cpp:178] Expression: , Win32 Error=0x906
[4304] 09:22:11: [Udp] Listen Shutdown.
[3756] 09:22:11: [RPC] Server terminated (rc=0)
[4304] 09:22:11: [RPC] Listen Stopped.
[4304] 09:22:11: [BINLSVC] Shutting down
[4304] 09:22:11: [BINLSVC][RPC][Ep={5F4FB9F0-C0E3-41C1-AA00-9A7C690AC3A3}] Closed
[4304] 09:22:11: [BINLSVC] Deleted.

It seems I've found out the solution myself, the issue seems to be caused when DHCP and WDS are on the same server, The installation must identify this during the first installation of WDS but not on subsequent installations, the method to
get it working again is:
1.
Install WDS Role (using defaults)
2.
Make the following registry change:
HKLM\SYSTEM\CurrentControlSet\services\WDSServer\Providers\WDSPXE\UseDhcpPorts = 0
3.
Run the following command line to initialize Windows Deployment Services:
wdsutil /initialize-server /reminst:D:\RemoteInstall
4.
Run the following command to enable the DHCP port registry setting
wdsutil /Set-Server /UseDHCPPorts:No /DHCPOption60:Yes

Nuance Sppech server service won't start

Hi All,
i installed Nuance ASR/TTS and tried to start the Speech Service and its not starting. please see the error below:
if anyone has face the same issue, please suggest.
regards
Munish

Hi Munish,
By the way did you check if you have a valid License running in Nuance server, please check the expiry date also as its a time bound license.
Thanks,
Anand
Please rate helpful posts !!

SQL Server Service Account - Domain Account - WMI Provider Error - 0x80092004

Hi,
if I try to use an domain account for SQL service start using SQL configuration Manager I receive the error
WMI Provider Error - 0x80092004
in Popup Window and in Eventlog 5 Error Events from Source MSSQLSERVER:
26014:
Unable to load user-specified certificate [Cert Hash(sha1) "BA78B5DBF93CCD7EFA1860C99B0D6141D480199A"]. The server will not accept a connection. You should verify that the certificate is correctly installed. See "Configuring Certificate for
Use by SSL" in Books Online.
17182:
TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property. "
17182:
TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
17826:
Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
17120:
SQL Server could not spawn FRunCommunicationsManager thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
After I put the account in local administrator group the service starts up.
I want to use the lowest privileges. Do I really need the SQL server service account in local administrator group? How to fix the error?
thanks

Hi baschuel,
It is recommended to run SQL Server service by using the lowest possible user rights and it is supported to use a domain account instead of an account from local Administrators group to configure SQL Server service. According to your error messages, the
issue could be due to that the incorrect certificate is used, or the domain account has no access to the Crypto folder(C:\ProgramData\Microsoft\Crypto). To troubleshoot the issue, you could follow the two solutions below.
1.Import the correct certificate following the steps in the article:
http://windows.microsoft.com/en-hk/windows/import-export-certificates-private-keys#1TC=windows-7
2.Grant the domain account full access to the Crypto folder.
Regards,
Michelle Li
If you have any feedback on our support, please click
here.

Mail services won't fully start

After the last software update and reboot on our Mavericks Server, I found the mail services to be offline. Trying to start them up in the Server app doesn't work (I click the switch to be "on", and it just goes back to "off".) I managed to get the incoming services working by running "serveradmin start mail" from the command line, but the MTA and related services remain offline with no apparent rhyme or reason. I've tried rebooting the machine as well, but to no avail.
None of the logs relating to the mail services show anything that would suggest a problem, and nothing has changed on this server or its environment (eg. DNS still fine).
Any tips? I feel like this server is built on a stack of cards. After bad past experiences of upgrading OS X servers, I did a fresh install of Mavericks and Mavericks Server to have a fresh, clean environment. Apparently even that is not enough to make this a reliable solution.
Here's the output of "serveradmin fullstatus mail":
mail:startedTime = "2014-04-28 17:35:45 +0000"
mail:setStateVersion = 1
mail:state = "STOPPING"
mail:protocolsArray:_array_index:0:status = "ON"
mail:protocolsArray:_array_index:0:kind = "INCOMING"
mail:protocolsArray:_array_index:0:protocol = "IMAP"
mail:protocolsArray:_array_index:0:state = "RUNNING"
mail:protocolsArray:_array_index:0:service = "MailAccess"
mail:protocolsArray:_array_index:0:error = ""
mail:protocolsArray:_array_index:1:status = "ON"
mail:protocolsArray:_array_index:1:kind = "INCOMING"
mail:protocolsArray:_array_index:1:protocol = "POP3"
mail:protocolsArray:_array_index:1:state = "RUNNING"
mail:protocolsArray:_array_index:1:service = "MailAccess"
mail:protocolsArray:_array_index:1:error = ""
mail:protocolsArray:_array_index:2:status = "ON"
mail:protocolsArray:_array_index:2:kind = "INCOMING"
mail:protocolsArray:_array_index:2:protocol = "SMTP"
mail:protocolsArray:_array_index:2:state = "STOPPED"
mail:protocolsArray:_array_index:2:service = "MailTransferAgent"
mail:protocolsArray:_array_index:2:error = ""
mail:protocolsArray:_array_index:3:status = "ON"
mail:protocolsArray:_array_index:3:kind = "OUTGOING"
mail:protocolsArray:_array_index:3:protocol = "SMTP"
mail:protocolsArray:_array_index:3:state = "STOPPED"
mail:protocolsArray:_array_index:3:service = "MailTransferAgent"
mail:protocolsArray:_array_index:3:error = ""
mail:protocolsArray:_array_index:4:status = "ON"
mail:protocolsArray:_array_index:4:kind = "INCOMING"
mail:protocolsArray:_array_index:4:protocol = ""
mail:protocolsArray:_array_index:4:state = "RUNNING"
mail:protocolsArray:_array_index:4:service = "ListServer"
mail:protocolsArray:_array_index:4:error = ""
mail:protocolsArray:_array_index:5:status = "ON"
mail:protocolsArray:_array_index:5:kind = "INCOMING"
mail:protocolsArray:_array_index:5:protocol = ""
mail:protocolsArray:_array_index:5:state = "STOPPED"
mail:protocolsArray:_array_index:5:service = "JunkMailFilter"
mail:protocolsArray:_array_index:5:error = ""
mail:protocolsArray:_array_index:6:status = "ON"
mail:protocolsArray:_array_index:6:kind = "INCOMING"
mail:protocolsArray:_array_index:6:protocol = ""
mail:protocolsArray:_array_index:6:state = "STOPPED"
mail:protocolsArray:_array_index:6:service = "VirusScanner"
mail:protocolsArray:_array_index:6:error = ""
mail:protocolsArray:_array_index:7:status = "ON"
mail:protocolsArray:_array_index:7:kind = "INCOMING"
mail:protocolsArray:_array_index:7:protocol = ""
mail:protocolsArray:_array_index:7:state = "STOPPED"
mail:protocolsArray:_array_index:7:service = "VirusDatabaseUpdater"
mail:protocolsArray:_array_index:7:error = ""
mail:logPaths:Server Error Log = "/Library/Logs/Mail/mail-err.log"
mail:logPaths:IMAP Log = "/Library/Logs/Mail/mail-info.log"
mail:logPaths:Server Log = "/Library/Logs/Mail/mail-info.log"
mail:logPaths:POP Log = "/Library/Logs/Mail/mail-info.log"
mail:logPaths:SMTP Log = "/var/log/mail.log"
mail:logPaths:List Server Log = "/Library/Logs/Mail/listserver.log"
mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
mail:imapStartedTime = "2014-04-28 17:35:45 +0000"
mail:postfixStartedTime = ""
mail:servicePortsRestrictionInfo = _empty_array
mail:servicePortsAreRestricted = "NO"
mail:connectionCount = 5
mail:readWriteSettingsVersion = 1
mail:serviceStatus = "DISABLED"

Disabling virus checking alone had no effect, but when I also disabled junk mail filtering, I at least get the green light now; however, the MTA still is "STOPPED" althought its status is "ON".
Current status: https://dl.dropboxusercontent.com/u/31250/gifs/confused3.gif
$ sudo serveradmin fullstatus mail
mail:startedTime = "2014-04-29 00:18:21 +0000"
mail:setStateVersion = 1
mail:state = "RUNNING"
mail:protocolsArray:_array_index:0:status = "ON"
mail:protocolsArray:_array_index:0:kind = "INCOMING"
mail:protocolsArray:_array_index:0:protocol = "IMAP"
mail:protocolsArray:_array_index:0:state = "RUNNING"
mail:protocolsArray:_array_index:0:service = "MailAccess"
mail:protocolsArray:_array_index:0:error = ""
mail:protocolsArray:_array_index:1:status = "ON"
mail:protocolsArray:_array_index:1:kind = "INCOMING"
mail:protocolsArray:_array_index:1:protocol = "POP3"
mail:protocolsArray:_array_index:1:state = "RUNNING"
mail:protocolsArray:_array_index:1:service = "MailAccess"
mail:protocolsArray:_array_index:1:error = ""
mail:protocolsArray:_array_index:2:status = "ON"
mail:protocolsArray:_array_index:2:kind = "INCOMING"
mail:protocolsArray:_array_index:2:protocol = "SMTP"
mail:protocolsArray:_array_index:2:state = "STOPPED"
mail:protocolsArray:_array_index:2:service = "MailTransferAgent"
mail:protocolsArray:_array_index:2:error = ""
mail:protocolsArray:_array_index:3:status = "ON"
mail:protocolsArray:_array_index:3:kind = "OUTGOING"
mail:protocolsArray:_array_index:3:protocol = "SMTP"
mail:protocolsArray:_array_index:3:state = "STOPPED"
mail:protocolsArray:_array_index:3:service = "MailTransferAgent"
mail:protocolsArray:_array_index:3:error = ""
mail:protocolsArray:_array_index:4:status = "ON"
mail:protocolsArray:_array_index:4:kind = "INCOMING"
mail:protocolsArray:_array_index:4:protocol = ""
mail:protocolsArray:_array_index:4:state = "RUNNING"
mail:protocolsArray:_array_index:4:service = "ListServer"
mail:protocolsArray:_array_index:4:error = ""
mail:protocolsArray:_array_index:5:status = "OFF"
mail:protocolsArray:_array_index:5:kind = "INCOMING"
mail:protocolsArray:_array_index:5:protocol = ""
mail:protocolsArray:_array_index:5:state = "STOPPED"
mail:protocolsArray:_array_index:5:service = "JunkMailFilter"
mail:protocolsArray:_array_index:5:error = ""
mail:protocolsArray:_array_index:6:status = "OFF"
mail:protocolsArray:_array_index:6:kind = "INCOMING"
mail:protocolsArray:_array_index:6:protocol = ""
mail:protocolsArray:_array_index:6:state = "STOPPED"
mail:protocolsArray:_array_index:6:service = "VirusScanner"
mail:protocolsArray:_array_index:6:error = ""
mail:protocolsArray:_array_index:7:status = "OFF"
mail:protocolsArray:_array_index:7:kind = "INCOMING"
mail:protocolsArray:_array_index:7:protocol = ""
mail:protocolsArray:_array_index:7:state = "STOPPED"
mail:protocolsArray:_array_index:7:service = "VirusDatabaseUpdater"
mail:protocolsArray:_array_index:7:error = ""
mail:logPaths:Server Error Log = "/Library/Logs/Mail/mail-err.log"
mail:logPaths:IMAP Log = "/Library/Logs/Mail/mail-info.log"
mail:logPaths:Server Log = "/Library/Logs/Mail/mail-info.log"
mail:logPaths:POP Log = "/Library/Logs/Mail/mail-info.log"
mail:logPaths:SMTP Log = "/var/log/mail.log"
mail:logPaths:List Server Log = "/Library/Logs/Mail/listserver.log"
mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
mail:imapStartedTime = "2014-04-29 00:18:21 +0000"
mail:postfixStartedTime = ""
mail:servicePortsRestrictionInfo = _empty_array
mail:servicePortsAreRestricted = "NO"
mail:connectionCount = 4
mail:readWriteSettingsVersion = 1
mail:serviceStatus = "ENABLED"

Service won't stay started!

I'm running ZFH 5.1.
The darn service that runs on the windows servers won't stay started.
It will start up fine, run for about 5 minutes and then stop.
In the event logs there are no entries to show errors or problems.
The servers are Windows 2003 or Windows 2000. I've tried it on both versions.
Any ideas?
Thanks,
Cheryl

Cheryl,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Migrating from Oracle to SQL Server - data won't migrate but no errors

I'm attempting to migrate a database from an Oracle 11g (11.1.0.7.0 64-bit) database to a SQL Server 2008 R2 (10.50.4033.0). I'm using SSMA, and the Oracle tool was installed on the target SQL Server by the DBA. I've completed all the steps up
to and including synchronizing the database, and the empty tables all exist in SQL Server. When I run the step to migrate the data, I get:
Migrating data...
Analyzing metadata...
Preparing table POLICYS.LOGINS...
Preparing data migration package...
Starting data migration Engine
Starting data migration...
Data migration operation has finished.
   0 table(s) successfully migrated.
   0 table(s) partially migrated.
   1 table(s) failed to migrate.
Then a summary box appears, and there is a red X next to the table (I'm trying to just convert 1 small table to begin with.) What immediately appears to be wrong is that the "To" table is blank.
I've attempted this multiple times, different tables (initially tried all tables) and tried both Server Side and Client Side migrations with the same result. There are no errors or warnings on the Error List.
I've found another online post where the user had the same issue, but in that instance they fixed it by changing the case of the table name. I tried that, but it didn't help. I'm not sure what is wrong that it won't migrate any data. Any help
is appreciated. TIA
-George

Hello,
Please review the migration process steps from the following tutorial:
http://blogs.msdn.com/b/ssma/archive/2010/08/27/migrating-oracle-s-sample-hr-schema.aspx
You can also get help writing an email to
[email protected]
For more information, please read the following article:
http://msdn.microsoft.com/en-us/library/hh313173(v=sql.110).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Illustrator 6 won't save! Unkown error has occured!

Illustrator won't let me save! It says "Unknown error has occured." I'm beyond frustrated at this point! Help! I only have line work and text I placed from AutoCAD as a DWG file on the artboard and I was going to color the rooms in Illustrator.

Which system?
Where are you trying to save?

Server services won't upgrade successfully

Greetings,
I am attempting to upgrade an intel XServe from 10.5.8 to 10.6. I have attemped a few different processes to achieve a successful result. The issue is that not all the services are upgrading successfully. Initially I cloned the 10.5 system to the 2nd internal drive and attempted an upgrade -- failed. Secondly I attempted a clean install and migration from the 1st drive and again attempted migration from a time machine backup -- failed and failed. In each instance the iChat service and Web services failed to upgrade and only a limited number of groups and users were migrated (the system has 77 users and 21 groups in addition to the built-ins). The system contains 2 dual-core processors, 4gb memory, 2 internal drives and a fibre channel card to an XServe RAID.
Any suggestions?

I have never had success upgrading a server. There are just enough changes with each version that it usually ends up not working or hobbled by some mysterious corruption. Really the surest and most reliable solution is to do a manual setup and importation. Not a pleasant prospect in the short run, but the best bet for happiness in the long haul.
Export the users, groups, and computer groups from the Workgroup Manager (not computers unless you do not bind them to the domain), exporting the settings of your server in Server Admin (File->Export->Service Settings) as references only (consider screen shots if you prefer)! Set up the new server from scratch, adding each service manually as needed matching the settings from the 10.5 server as appropriate.
Set up all your shares again, etc so they are identical to the way they were in the old server.
In Workgroup Manager import the users, then groups, computers (if you don't bind them to the domain) and computer groups.
Since this process does not include user passwords, you will need to select all users (except the diradmin) and enter a default password. Then require a password change at next login under Advanced->Options... in Workgroup manager. If you are not using OpenDirectory, then I cannot speak to user password management issues.

ITunes 7 won't launch. Unkown error occurred (-200). Tried everything

I tried the fixes posted here. No help. I can not launch iTunes or use the store to download.
QuickTime says "Overrun buffer detected" it doesn't run either since I updated. I changed settings but the old program won't access iTunes library because "it was installed by a newer version ot iTunes."
Frustrating, frustrating, really, really frustrating.
HELP

I tried the fixes posted here. No help. I can not launch iTunes or use the store to download.
QuickTime says "Overrun buffer detected" it doesn't run either since I updated. I changed settings but the old program won't access iTunes library because "it was installed by a newer version ot iTunes."
Frustrating, frustrating, really, really frustrating.
HELP

Front End Services won't start with new cert, SChannel error about hostname

We have an existing Lync 2013 Enterprise system set up, and many of the servers are using certs issues by our local CA. I want to move several of the certs to third-party certificates so that non-domain machines can connect. The first change I'm making is
on our Edge pool. However, I'm having an issue. Here are the details:
Our internal domain space is int.domain.com. Our external domain space is domain.com. Our Lync FE server is LS01.int.pool.com and our FE pool is pool01.int.domain.com. I have generated a CSR and requested a certificate from Globalsign with the following
characteristics:
SN: pool01.int.domain.com
SAN: pool01.int.domain.com
SAN: domain.com (wildcard)
SAN: int.domain.com (wildcard)
After applying the new cert using the topology builder, I've rebooted and the Lync Front-End Server service will no longer start. The following SChannel error is in the event logs:
The certificate received from the remote server does not contain the expected name. It is therefore not possible to determine whether we are connecting to the correct server. The server name we were expecting is ls01.int.domain.com. The SSL connection request
has failed. The attached data contains the server certificate.
After reverting back to the original local CA cert, the services start. The local cert has a ton of individual SANs set up but I was under the impression that the wildcard SANs were supported and would be ok for the hostnames.
Why is it looking for my FE server name and not the pool? Is this an issue with my deployment, or is it with the cert? I'm not sure where to go from here.

Hey Matt,
As mentioned above wildcards are only supported for Lync web services such as lyncdiscover, dialin and meeting URL's. It is OK to have wildcards in the certificates SAN, but you must also specifically include the following:
SN: pool01.int.domain.com (SN must be pool)
SAN: pool01.int.domain.com (pool must also be included in SAN)
SAN: lync-fe-001.int.domain.com (the machine name of your front end server)
This should solve the issue for you.
Andrew Morpeth
Lync Server Specialist - Auckland, NZ
Check out my blog

Windows 2008 R2 - Error 2 Server Service wont start

He
We tried to start the Server Service on windows 2008 R2 but it wont start error: 2. While we check the service dependency we are unable to see the "SMB 1 xxx Driver" instead it is having name SRV.
so how to restore the service back to the original state please let us know.

Hi SPV4645,
The following similar thread solution may work for your case.
Server service (lanmanserver) will not start
https://social.technet.microsoft.com/Forums/windowsserver/en-US/3316a5e0-fc2f-4300-917d-66e1527b4aa7/server-service-lanmanserver-will-not-start
Please also confirm the File and Printer Sharing for Microsoft Network driver has selected.
The related KB:
You receive a "The server service is not started" error message when you try to add a user to a group in Windows XP
http://support.microsoft.com/en-us/kb/885859
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Server Services won't re-start (unkown error)

Similar Messages

Maybe you are looking for