Server Setting for ichat 4.o

I haven't been able to log in to my ichat in a while. Doeas anybody know of the server settings and help getting a new password?
It asks to go to my mac account,but I don't know the password for that either.
PLEASE HELP!!!

Hi
Try logging on to AIM on port 443 rather than port 5190.
Go to IChat in the menu bar > Preferences > Accounts.
Log out of AIM and then use the Server Settings tab
Set the port to 443.
Log back in again.

Similar Messages

  • Exchange Server setting for Outlook 2013 in Office Customization Tool

    Hello, 
    I'm try to configure Office Customization Tool such that when a domain user logs into any workstation, their outlook profile is automatically configured and the shared department email account is added as the secondary mailbox but it hasn't worked for me.
    I looked up for the settings on the internet where I found a few server settings but none of them worked for me. We have Office365; I added outlook.office365.com, and the settings that starts with chprod.. that didn't work either. I also sent a test email,
    and looked up the server settings from messageheaderanalyzer in office365 OWA and added the settings in the OCT, that couldn't pull up the email either. How can I make it to work? 
    Just to be clear, this is what I want. 
    When a user logs in to the workstation and starts outlook, it should find the users email and configure it automatically. Then it should also add department mailbox as their secondary mailbox if they have permission. 
    Thanks

    There is however an Outlook Group Policy
    Template: "Automatically configure profile based on Active Directory Primary SMTP address"
    "This policy setting controls whether users who are joined to a domain in an Active Directory environment can change the primary SMTP address that is used when they set up accounts in Outlook.
    If this policy setting is enabled, users can create a new profile by entering a profile name. The profile is created without using the New Account wizard. No user interface appears as the profile is created, which might cause users to think that the computer
    has crashed. 
    If you disable or do not configure this policy setting, users joined to a domain in an Active Directory environment, and without a configured email account, see the current logged in user’s primary SMTP address entered in the email address box in the New
    Account wizard. The email address can be changed to configure a different account. Or, if Next is clicked, the default settings are used."
    Mike Crowley | MVP
    My Blog --
    Planet Technologies

  • Gtalk server setting for IM in Nokia n72

    Hi, Does anybody knows how to configure the gtalk in inbuilt IM in N72?
    Please reply with server settings details.

    Hello ,
               i m in delhi.. using airtel... the same problem im facing with my nokia e 63... i need to know the settings for the in built IM for gtalk.. thanks in advance
    Moderator Note:
    Edited post ( e-mail address )
    Please be informed that we have edited your post as it contains your e-mail address. For your security, we do not allow posting personal or contact information in the discussion board. Thank you for understanding.
    Kind regards.

  • Configure the correct mail server setting for Cox residential?

    Cox not tech support for there "devices"

    See here: http://ww2.cox.com/residential/centralflorida/support/internet/article.cox?artic leId=a8fb24c0-6440-11df-ccef-000000000000
    You must head to Settings -> Mail, Contacts, and Calendars and choose Add Account. Choose Other as the type.
    B-rock

  • What is the outgoing server setting for bluehost with iphone4

    I can receive but not send emails from my iphone 4 from my bluehost account. I set it up using my box number as I read somewhere to do and that allowed me to receive, but I cannot send.  boxXXX.bluehost.com
    Any ideas?

    When working with 3rd party providers you need to check with them:
    http://tutorials.bluehost.com/iphone/   <--- has a step by step video

  • Trying to set up iChat server for office with Macs, PCs and iPads on LAN

    Looking for advice on compatable clients and issues setting up iChat server in a small office environment to chat between Macs, PCs, and iPads on the LAN.

    Same situation before here...
    I would advise to go arround on the net, in search for applications at your taste.
    We successfully installed the jabber clients for windows: Adium and SafetyJabber
    For the pad's we use IM Pro
    Works all togeather.
    Suc6
    Martyin

  • Ichat cannot change server setting, cannot connect

    iChat cannot connect. Read it somewhere that I should change server setting from 5190 to 443 after logging out. But the server setting will auto and immediately change back to 5190. Won't let me change to 443. Please help. Thank you.

    Hi,
    "Safe" is a relative term here.
    iChat, when you restart it will recreate them.
    com.apple.ichat.AIM.plist (or the Jabber one) only hold the Login details and will force a fresh login to the relevant server.
    com.apple.ichatAgent.plist This holds surprising little info.  Mainly it holds the info order for the iTunes is Playing script (Artist, Album and Track etc.).  It holds the default Idle time (and then of course if you are Idle)
    As iChatAgent actually does the login is hold pointers to the other .plists.
    com.apple.ichat.SubNet.plist  Holds the Bonjour info (or rather where to get it in the Address Book).
    The Status Messages one does what it says.  It will hold all the Status Messages you have Created and decided to Keep.
    com.apple.ichat.plist  This holds everything else.  Everything in the Preferences accept the Account Pane.
    SOme of the Menu Items depending which window is Front.
    Examples.  The Sort Order of your Buddy listt from the View Menu (when the Buddy List is "front". This can be a 2 pass setting (As in Avaible and Alphabetical). The capabilities shown in the Connection Doctor. (Video Menu).
    It does hold a list of all the account you have in the Preferences  and some info is then pulled to Display the Accounts in the iChat Menu and the Buddy List windows in the Window Menu
    Most important it holds the default or other Font you chose in Messages in the Preferences, whether that font is Coloured, the colour of the IM Background (Balloons or other style).  (Which Style form the View Menu > Messages). Whether you are saving transcripts of the Text Chats, and in iChat 5 what part of an old chat it displays.
    If you were using Incoming Overrides you lose that setting.
    All your Alerts settings both Globally set in Preferences > Alerts and those set in a Buddy's Info Card
    I could probably list more.
    If you have a problem then it pays to tackle the .plist one at a time so that you know which one "Fixed" it.
    Deleting them all in one go is often too heavy handed.
    When I have a clear idea as to which one may be causing the issue I will list that one only.
    8:57 PM      Friday; January 13, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously
    Message was edited by: Ralph Johns (UK)

  • Open data set for reading excel file on application server in back ground

    open data set for reading excel file on application server in back ground

    hi Vijay,
    I am afraid you won't be able to read from Excel file on Appl. Server.
    ec

  • Error when installing 9.0.1.4.0 patch set for the Oracle Database Server.

    Hi to all.
    Currently, i am trying to install patches for portal server.
    The server OS is Sun Solaris 8.
    We are using Oracle9iAS.
    Now, we are installing 9.0.1.4.0 patch set for the Oracle Database Server.
    We managed to install the patch, but have problem with the Post Install Action.
    We managed to run
    -ALTER SYSTEM ENABLE RESTRICTED SESSION;
    -@rdbms/admin/catpatch.sql
    -ALTER SYSTEM DISABLE RESTRICTED SESSION;
    -CONNECT / AS SYSDBA
    -update obj$ set status=5 where type#=29 and owner#!=0;
    -commit;
    But, when we come to the next command, which is to shutdown, it gives us like
    this..
    SQL> update obj$ set status=5 where type#=29 and owner#!=0;
    1402 rows updated.
    SQL> commit;
    Commit complete.
    SQL> shutdown immediate
    Database closed.
    Database dismounted.
    ORA-00604: error occurred at recursive SQL level 1
    ORA-01219: database not open: queries allowed on fixed tables/views only
    We tried to startup the database..it gives us this error..
    SQL> startup
    ORA-01081: cannot start already-running ORACLE - shut it down first
    So, we tried to shutdown again..
    SQL> shutdown immediate
    ORA-01089: immediate shutdown in progress - no operations are permitted
    I been informed that this is maybe a Database problem related. Any ideas?
    Best Wishes,
    Rushdan Md Saad.

    Patchsets could be obtained (only) from http://metalink.oracle.com
    You need to have valid CSI for access.
    P.S: Sorry Werner, I didn't see you post.
    Message was edited by:
    Ivan Kartik

  • How to find Collation setting for Analysis services in Sql server 2000

    Hi
    Can some please guide me how do I check  Collation setting for Analysis services in Sql server 2000
    i need it to install Analysis servcies on my machine

    Hi SMV123,
    We can find the collation settings for Analysis services in SQL Server Management Studio (SSMS). Connect to the SSAS instance from within SSMS->Right click on the instance and select Properties->An Analysis Server properties page will appear. And then
    on the left hand side is a Language /collation option.
    Besides, here is a link about how to install SQL Server Analysis Services 2000 for your reference.
    How to Install SQL Server 2000 Analysis Servicese
    Regards,
    Charlie Liao
    Charlie Liao
    TechNet Community Support

  • WebUtil and Jacob Setting for AIX Server

    Dear All
    I am using forms 10G.
    I have done the setting for webUtil and Jacob in my pc for browse button to be and it is working fine .
    But can any one please tell me the steps for implement these things in AIX server .I mean how to configure this to utility Webutil and Jacob in AIX server .
    Kindly anyone tell me what needs to be done in server for webutil ?
    Edited by: LuKKa on Sep 22, 2010 12:01 PM

    the steps are same as in other supported systems.
    Since my blog is failed to help you then i will recommend you to do some more reading ...
    Read the docs http://www.oracle.com/technetwork/developer-tools/forms/webutil-090641.html

  • How can I set firefox as default browser in citrix server, only for few groups. does -silent -setdefaultbrowser option working in latest version?

    How can I set firefox as default browser in citrix server, only for few groups. does -silent -setdefaultbrowser option working in latest version?

    I think so: [http://discussions.citrix.com/topic/330585-firefox-default-browser-for-all-users/]
    Can you also set the default programs in the Group Policy User Settings?
    Reference: [http://community.spiceworks.com/topic/884740-default-user-profile-in-citrix-environment]

  • Recommended OPEN CURSORS setting for Oracle serving a web app

    G'day
    Hopefully Phil is still lurking here, so might see this.  Or anyone else that knows about Oracle.
    I've always thought the default for "maximum pooled statements" setting for an Oracle DSN - which is 300 - is way too low to be sensible for a web app (which, let's face it, any CF DSN is going to be used for!).  I usually find I end up with it up around 1000-2000, depending on the sizeof the app, and how busy it is.
    I'm adequate with monkeying around with Oracle, and have needed to do a moderate bit of that sort of thing in our dev environment, but I am by no means a DBA, so it's all very seat-of-the-pants.
    So I'm keen to know what other people have their maximum pooled statements / open cursors setting set to for their Oracle-driven web sites/apps.
    One of the reasons I'm asking is that I wonder if it might be worth while to suggest the default for CF9 is upped to 1000 or so..?
    Thoughts / comment?
    Adam

    I personally would not set the limit any higher than 300, and I'd consider keeping it even lower.
    Each pooled query / open connection is imposing resource-burdens on both the CF and the Oracle servers by creating what might be thought of as "a very crowded restaurant."  Most of them are just standing around, but they nevertheless are occupying the restaurant, and the potential exists that every one of them might try to order a burger-and-fries at exactly the same time.
    The "number of pooled statements" should be such that your SQL-server can actually handle that number of simultaneous requests, both in terms of active searches and of maintaining the still-open result sets.  Beyond that point, incoming web requests should be forced to wait.  Set an "occupancy limit" to your proverbial restaurant such that everyone could come in and be timely served at the same time.
    Categorically, if you plot out response-time graphs about such things (SQL servers, virtual memory subsystems, and so on), they exhibit a fairly-linear performance curve up to a point, after which "the elbow- or knee-point is reached" and beyond that point it becomes exponential in a very, very bad way.  I saw this happen in a batch-processing subsystem long ago on a very small mainframe:  (yeah, I'm makin' these numbers up...)
    Number of Jobs at Once
    Completion Time per Job
    1
    30 seconds
    3
    40 seconds
    8
    9 minutes
    12
    4.5 hours
    It was just-about that bad.  And what I did to (dramatically...) address the problem was to impose simultaneous-job limits on that subsystem.  As long as the number of simultaneous jobs was constrained to "less than 3 at a time," a workload of 12 jobs could be reliably completed in (4 * 40) seconds, whereas if all 12 jobs tried to run at once, the computer would have reason to file a lawsuit for abuse.

  • Email message leave on server - is there a setting for this?

    I just got my Droid Charge, and my old Droid had a setting to leave the email messages on server. I use pop3 email to get my messages from my work email address, but I need to make sure the messages are left on the server and not removed when I view my email messages. Does anyone know if there is a setting, or does the phone leave the messages on the server, or does it pull them off? It is critical to me that they are left on the server when I am using my phone to view the email messages.

    Dear Red,
    Hmmm...are you using the native email app that came with the phone (NOT the Gmail app)?
    If so, try a soft reset of the phone by removing and reinstalling the battery.  That may be enough to recover the settings choice for incoming server in your email app.  I had/have a similar problem with "disappearing" settings relating to the Sound settings.  I am missing a setting that is apparently part of the basic feature set for the OS, but I can make it appear (for a short time) by doing a reset.  Once I turn off the phone and turn it back on, the setting again disappears .
    Anyway, give that a try and report back on sucess or not.

  • Setting for J2EE server do not exist

    Hi,
    I have prepared a web service from a FM.
    I can't test it from the WSADMIN since this system is not integrated to a J2EE server. So I get the error message "Setting for J2EE server do not exist"
    I am able to generate the WSDL file from Tcode WSADMIN
    How can I test this web service from a browser with a J2EE server? If browser not possible then how can I test this web service.
    Thank you,
    Sam

    Hi Sam,
    I am not sure if you can test the web services without a J2EE server. For
    testing in wsadmin, you do not need the system to be integrated with a J2EE server. Only the details of any J2EE server in the landscape can be given in
    wsadmin -> Goto -> Administration Settings .
    Regards
    Srikishan

Maybe you are looking for