Server Settings Help

I am using Iweb 08 and would like to publih to my personal domain name. I already changed the CNAME as Apple specifies to web.me.com. My domain is with godaddy. However, I don't know what I am supposed to enter in for the Name Server info. Currently, it is the default nameservers for Godaddy. There is also an IP address listed. Don't I need to change these fields as well? I have no idea what goes here. Or by changing the CNAME this is all I need to do? Please help.

Name servers are nothing to do with CNAME and don't need changing at all.
You just need to forward your domain name and it should be either www and/or@, then CNAME and then web.me.com and that is all you need do.

Similar Messages

I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5. It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465

I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5. It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465 SSL) and none of them work. Please help!

You will need to get the required info to create/access the account with an email client from your school.
Are you currently accessing the account with an email client on your computer - if you have a Mac with the Mail.app, or if you have a PC with Outlook Express, etc.? If so, you can get the required account settings there.

I'm trying to set up my new iPhone 5s from a backup of my previous iPhone, when trying to enter my Facebook login info in settings I keep getting the following error message : error signing in could not communicate with server, please help !

I'm trying to set up my new iPhone 5s from a backup of my previous iPhone, when trying to enter my Facebook login info in settings I keep getting the following error message : error signing in could not communicate with server, please help !

Can you access other apps? Can you acess the internet? Can you access applications that use internet besides facebook?
If answer is yes to all of these; contact Facebook.

My Ipad has stopped receiving emails today. It has IOS7 on it. The settings are correct but says "connection to the server failed" help!

My Ipad has stopped receiving emails today. It has IOS7 on it. The settings are correct but says "connection to the server failed" help!
It is the same accout that has been working find for years and just after I updated the software this has happened. My Mac is still receiving and sending via Outlook with the same account and settings. My Iphone 5C has also stopped and I tried deleting the account and adding again (via exchange as it's an exchange accout) the same way I always do and it won't even recognise it to add the settings.
So annoying. Can anyone help?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
 Cheers, Tom

I am having trouble sending out email . It wont send and I think my server settings are wrong . Can anyone help me ?

My emails wont go out . I believe I have my server settings wrong but cant seem to correct them . Can anyone help me with this problem ?

incoming and outgoing mail servers settings have to be correct to send.
cheers,
Jack

Updated to ios6 on my ipod touch 4g when i try to turn it on it doesn't, it just comes up with the itunes symbol and the usb, so i plugged into laptop opened itunes and it says to restore back to ios5 i pressed restore and it cant connect to server? help?

updated to ios6 on my ipod touch 4g when i try to turn it on it doesn't, it just comes up with the itunes symbol and the usb, so i plugged into laptop opened itunes and it says to restore back to ios5 i pressed restore and it cant connect to server? help?

Maunally restore it. In order to do this:
-Download the iOS 5.1.1 firmware from here http://www.redmondpie.com/download-5.1.1-ios-for-iphone-4s-4-3gs-ipad-ipod-touch -direct-official-links/
1. After downloading the firmware from the given link, open iTunes and click on your device.
2. Now press SHIFT on your keyboard and while pressing it click on "Restore".
3. A dialog box will appear.
4. Select the firmware you downloaded and click ok.
5. Done!!! Your iPhone will now be restored to 5.1.1 and if you had backed up your iPod before, then you can put all its settings afterwards.

Content Server Settings not working (for PPM)

Hi,
We are on PPM5.0.
We have set up the Content Server settings according to the PPM
configuration guide.
We, however, still see the documents (uploaded in the project) showing
up on the PPM Server.
We checked the entries in table CFF_CONT (in the PPM server), and see
the contents updating when a document is uploaded. This makes us
conclude that the documents are still not being stored on the Content
Server.
Any switch/flag that needs to be set/reset in the WAS and/or Content Server that'll help??
Or anything else...???
Thanks.

Earl Powers BSR2751547 Thank you all. your suggestions really helped.

Server settings for remote Server in Flash Builder 4.5 Premium

Has anyone figured this out? Seems like everyone is talking about FlashBuilder that comes with PHP and that doesn't help me. So I'm still having trouble moving my mobile app to a remote server and I have FlashBuilder 4.5 Premium without PHP.
I have created a PHP project outside of Flash Builder and then I have connected to it using the Data/Service tab, but then it ask for the server information and that is where I'm having the issues.
It works create with the setting like this.
MAC:
Server Options
Web Root: /Applications/MAMP/htdocs
Root URL: http://localhost/
But when you try to export a release build or just like to test it, and insert your server settings.
Server Options
Web Root: /home/username/domain_name/
Root URL: http://mydomain.com
It doesn't Validate which in turn won't let the project work. Also it would be nice to put the remote server in there for testing instead of just for release builds. Any one have an answer. Every tutorial or explanation shows localhost.
thanks

Hello guys,
I have found a solution: In ZendFramework/library/Zend/Amf/Response/Http.php linenumber 59:
$ssl = $_SERVER['HTTPS']; is given an error.
I did this:
$_SERVER['HTTPS'] = 'off';
$ssl = $_SERVER['HTTPS'];
So add this line....
And it works...
Hope it works for you too.
Ooh, and don't forget to follow the instruction of TweenOut.
Erik.
Van: tweenOut [email protected]
Verzonden: dinsdag 20 december 2011 18:42
Aan: EGJ Steens
Onderwerp: Server settings for remote Server in Flash Builder 4.5 Premium
Re: Server settings for remote Server in Flash Builder 4.5 Premium
created by tweenOut <http://forums.adobe.com/people/tweenOut> in Using Flash Builder - View the full discussion <http://forums.adobe.com/message/4095833#4095833

Email server settings

Hi, I have a Blackberry Pearl 8130 that used to be used to access our county school system's email account. My wife entered some information into the Blackberry 2 years ago, and it apprently did some sort of an auto-config for the email account. She doesn't remember entering any server settings, etc etc. My question is how can we pull up the account settings (incoming and outgoing servers, etc) to plug into an iPhone that needs to access that account? The iPhone doesn't seem to be able to perform the same auto-config that the Pearl apparently was able to do. I'm not terribly Blackberry-literate (it's been my wife's phone), so I'll almost certainly need a good step-by-step for this if it can be done! Thanks in advance for any help you guys can pass along!

Hmmmm...well, if it's not one of those that BIS auto-recognizes, then you'd have had to put them in way back then...and can see them now. So try this.
On your BB, go into Setup > Email Settings. That should display a list of the various BIS conduits that are configured. Click on the one in question and that should display the requisite settings. You might also have to press the BBKey and select "Advanced Settings" to see the server names and such.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can you upgrade from 1.3.0.20 small ovf to 2.1 without migrating to a new server? It sounds like you can just adjust the server settings now.

Can you upgrade from 1.3.0.20 small ovf to 2.1 without migrating to a new server? It sounds like you can just adjust the server settings now. I am currently running 1.3.0.20 and I have enough to do with also needing to upgrade my wlc to 7.4.121.0 and getting the MSE up to 7.4.121.0 without having to stand up a new server if I don't have to. Please share any information you have in regards to your experience with coming from a version 1.2-1.3 small ovf and going to 2.1.
Thanks,
Andrew

You are better off standing up a new server. It's cleaner and safer..... you can always try to upgrade if you wish, but if things don't work out well, then you just wasted a lot of time. Snapshot the VM and export the floor plans, just in case. The ova is built around the DB size, so I don't know how well the DB will perform if you try to expand memory or drive space after an upgrade.
Please rate helpful post and Cisco Support Community will donate to Kiva
Scotty

Do we need to enter full email address in Incoming mail server settings on POP Account

Do we need to enter full email address in Incoming mail server settings on POP Account or just the username? For example does it have to be [email protected] or only jim.nicholas works? How does it affect the way the emails are delivered between laptop (primary device) and ipad ???
Please need help asap!!
Thanks.

For my POP account I have my full email address in the Address field but just my name (and not the '@...') in the User Name under Incoming Mail Server

ICal Server setup help !!!

Hello All,
I would like to share my experience with setting up the iCal server and all the hick ups I had to get it finally working. At least what worked for me. Check the basics before you start.
This is all done from after installing the server in Advanced setup or so to say normal installation as it was under Tiger. I'm trying to summarize what I have done. It took me a lot of hours do. So if I mis something feel free to reply with the missing things. Maybe together we can setup a working manual for all others that have problems with the setup and lack documentation from Apple.
1) Make sure your DNS is setup properly and working. Test it with:
type: “named-checkconf” in de root account of the terminal. Nothing should happen thats OK
type: “named-checkzone” in de root account of the terminal make sure you use the complete path and bare in mind that Apple changed the DNS setup again pointing to something like var/named/zones/db.example.come.zone.apple. The serial of the DNS should load and you should receive a OK. Make sure that your server IP is also mentioned in the system preferences/network DNS so you can use for example the server.example.com in server admin.
2) Either use SSL or don't when you want to use, use it everywhere otherwise it something will slip trough and want work. Without SSL it appears to work easier in the setup from local iCal client to server. But SSL is of course more secure. I want talk about Kerberos because I'm not able to get that to work yet.
3) Make sure you set it up from an "Open directory", "Local directory" should/could work to but I haven't test that yet and I seriously doubt it would work properly.
That being said I now can share my setup with you (switch your firewall of during setup it's easier to troubleshoot, switch it on again if everything works. If it stops working after the firewall is on again, well you know where to look for the problem :-)):
1) After setting up the Open Directory Master I switched on SSL and created a own certificate for my server. I didn't protected the certificate with a password as it gives a lot of extra problems with setting things it up. You can than select the certificate under Server Admin/Open Directory click on setting and click the tab LDAP. There you can select it.
2) Make sure your webserver is running and you have a working website where you can go to. Under Server Admin make sure that under the selection Sites that your FQDN is filled out. Being something like www.example.com and not example.com. The second one could cause iCal web part to not work accordingly at least that is my experience. After that choose security and make sure SSL is on and your certificate is selected. The rest of the website settings is pretty basic I didn't changed to much. I do know that I switched on some extra modules. Being bonjour_module, authzsvnmodule, davsvnmodule. This prevented further in the installation the 210 error when I went to the Calendar under my webbrowser. I wouldn't know which of the 3 is doing the trick I only know that after this it worked for me.
3) Pffffff OK go to the iCal Server settings under the Server Admin. The settings are straight forward but again make sure SSL is on and your certificate is selected. And look at your host name which should be someting like server.example.com. If you are not able to get DNS setup properly you could try your machines example.local name. But that again could give troubles when you want to use local iCal client outside the door on a laptop for example.
These where all the server admin setting. Now go to the Workgroup Manager and selected the group/groups you want to have Calendaring switched on and choose the way people are able to logon. This you can do by going to the group select the default website and services you want to give. Then select under Allow the way people can logon to this website or iCal services.
When that's done you should have everything up and running on the server site. So now go to a local iCal client and go to preferences/accounts/server setting. Click the + on the left bottom site and fill out a name and password leave the server option for now to auto. This way and when everything is setup properly you should get something like https://server.example.com:8443/principals/_uids_/14A0DD22-86CA-4F55-96D9-9CB461640D52/. The end number should refer to your name and password account so the number want be the same as in this example. Well if it works you are one of the lucky people and you are able to setup a shared Calendar from there. It would help a lot if you have more than one machine to test. Because it didn't worked on my MacBook Pro getting a famous error "iCal unexpected secure name resolution" But it did worked on my wifes iMac. So the server settings are OK. Now the good part when it's not working is that you can go to your webbrowser and type or copy the following: https://www.example.com:8443/principals/users/shortname (naturally use your own server name and user name). There you can see details of the principals settings. Including youre uids number. This number is unique for your name and password. Copy this number. Then go back to iCal switch of the auto find in iCal client under preferences/accounts/server settings. The first part of the link is https://server.example.com:8443/principals/uids/(Now paste you number here). Hit enter and see what happens. It the name server is not working for you than use for example iso server the name mail if you have it setup in the DNS is should work. It did worked for me and it gave me a nice shared calendar which you can name for yourself. Every group member should be able to see this agenda once hooked up to it via iCal client and prefences/accounts/server settings.
If you go to your website or www.example.com/groups you should see youre shared group. Sorry I only tried it with one group sofar. If you make changes to the calendar from the webbrowser it will show up after a refresh in your iCal client and visa versa. The only thing I still have problems with is the events for more days. They show up on the web as events but when I click them they produce a unwanted error. But when it's based on a single day than it work perfectly.
Hopefully you have a working iCal server to now. If you find something interesting or you think I left some important things out. Please reply and fill out the blanks.
I just hope that it will save some time for the new once setting this up.

Thank you for sharing your experiences. I am looking at setting up an iCal server myself for our business. However, our situation is a bit different. Could you also share what kind of workgroup you set it up for? And maybe help me answer a few questions below. Thanks in advance!
First a little background. We are a small management company. We have individual clients that we manage. We need to have access to their calendars to schedule events, etc. The thing is that we would be the only ones looking at everyone else's calendars at once so that we can coordinate our own schedules so that we can be where it is most important but still not lose track of other activities.
1. What kind of machine are you running the iCal Server on? Xserve? MacPro?
2. Is it possible to view multiple users' calendars within a single calendar view?
3. Does setting up this kind of calendar server sound like the setup for our situation where only we, the management, will be able to view all calendars?
4. How difficult will this set up be on our clients and their machines since we have little control over their personal machines? (The majority of our clients are all Mac users. There may be one PC user.)

Configure Server Settings

when i configure server settings in adobe flash 4.6 builder with Livecycle Data services 3.1 then i get the error as "Only LiveCycle Data Services 2.6 and higher are supported."
please help me out.

Thanks for answering my question, so it appears I should not worry about email scanning

Duplicate Server Settings for Backup

I am wanting to duplicate my current Apple Server settings (10.4.8) into a new, virgin Server installation. We are basically only using IMAP mail and VPN on the server.
I have found "migration" instructions from 10.3 to 10.4, that show how settings can be saved to a USB flash stick and then used to install the new server. I haven't been able to get these instructions to work however, the new server installation doesn't see the flash stick.
Does anyone have any comprehensive instructions for this kind of 10.4 - 10.4 migration?

what settings are you trying to migrate?
Are you replacing the existing server or adding another (if replacing, we'll want to give you cloning instructions- it's much easier)
What hardware, are they both PPC?
What might help you... in ServerAdmin, when you click a service, then click settings, you will see a document icon in the bottom left of the window. If you drag this icon to the desktop, you will save a plist of that services config. Do this for all services you wish to copy the config from. Move those documents to the new server ANY way you can, you can use mac.com, email, file server, burn a CD, it doesn't matter.
On the new server, open Server Admin, then the service you wish to config, click settings, then drag the plist to the ServerAdmin window. This will load all settings from the old to the new.
But.... don't go through all those steps if your intention is to replace the old server... cloning can be much much easier.
If you need more of an assist, please post more about what exactly you want to copy from one server to the other. Explain what services will be in use on each machine.
Jeff

RD Gateway Manager - Unable to read RD Gateway Server Settings

I'm trying to install a Remote Desktop Gateway into my domain, but I am running into a serious road-block... when I load RD Gateway Manager to configure the service, there is nothing to configure because it won't load my server into the console. When I try
to connect to it manually, it returns the following error:
"Unable to read RD Gateway Server Settings"
There are no errors or warnings in Event Viewer. I can verify that C:\Windows\System32\tsgateway\rap.xml exists and is readable. I can verify that Network Policy does have a TS_CAP_01 policy and it is enabled. A valid certificate was applied during setup
(and I've also tried choosing ask me later).
I have already tried uninstalling and reinstalling the role service (including manually verifying that the policies are removed). I also have this working on another domain server, so I'm at a loss for what to look for... How can I resolve this so that I
can finish configuring the service?

Hello,
Thanks for your post.
From your description, I understand that you’re trying to install the RD Gateway role on a Windows Server 2008 R2-based domain computer. However, after the role
is install, the RD Gateway Manager cannot be loaded into the RD Gateway Manager. The error prompts “Unable to read RD Gateway Server Settings”.
Based on my experience, the issue may be caused by problematic installation or startup of the RD Gateway role. Before we troubleshoot the issue further, I recommend
you to enable the Audit level logging in the Event Viewer and double-check the related clues in the event viewer. To do that, please use the following steps:
1.
On the RD Gateway server open RD Gateway Manager. To open RD Gateway Manager, click
Start, point to Administrative Tools, point to
Remote Desktop Services, and then click RD Gateway Manager.
2.
In the console tree, right-click the node that represents your RD Gateway server, which is named for the computer on which the RD Gateway server is running, and then
click Properties.
3.
On the
Auditing tab, select or clear the appropriate check boxes to specify the events that you want to monitor for RD Gateway, and then click
OK.
When these events occur, you can monitor the corresponding events by using Windows Event Viewer. RD Gateway Manager server events are stored in Event Viewer under
Application and Services Logs\Microsoft\Windows\Terminal Services-Gateway\.
Let us know the result if possible. We’d like to help further based on your information replied. Thanks.
Lionel Chen
TechNet
Subscriber Support in forum
If you have any feedback on our support, please contact
[email protected]
This posting is provided "AS IS" with no warranties, and confers no rights.

Server Settings Help

Similar Messages

Maybe you are looking for