Server side mailrules are not working!

Hi,
on my Lion Server the server side mailrules are not working.
I created about 4 different rules via the webmail interface but none of them are applied to incoming mails :-/
They were working back in the days I used 10.5 and 10.6 Server (this was not upgraded!).
Are server side mailrules are working for you?
Any assistance would be appreciated.
Regards,
Eldrik

Nevermind... got it sorted out..
My rules are based on the senders email address and switching from "is equal" to "contains" (sorry only got the translation from German) did the trick!
Greetz
Eldrik

Similar Messages

Windows Server 2003 Updates are not working

Hello Dear Support
Please can you help me to sort out the issue for the Windows Updates, I cannot install automatically it is giving me error message " Failed"
What can be reason what i need to follow, i tried but couldn't figure out the exact problem
Kind Regards, Muneeb

Hi,
Please try below:
Step 1: Register DLL files
===================
By trying this step, we can check if the update engines are working properly.
1. Close all instances of Internet Explorer.
2. Click Start and Run, type "REGSVR32 ATL.DLL" (without quotes) in the open box and click OK.
Note: There is a space between REGSVR32 and ATL.DLL
3. Similarly, one by one, register the files listed below:
REGSVR32 MSXML3.DLL
REGSVR32 WUAPI.DLL
REGSVR32 WUAUENG.DLL
REGSVR32 WUAUENG1.DLL
REGSVR32 WUPS2.DLL
REGSVR32 WUCLTUI.DLL
REGSVR32 WUPS.DLL
REGSVR32 WUWEB.DLL
REGSVR32 QMGR.DLL
REGSVR32 QMGRPRXY.DLL
REGSVR32 JSCRIPT.DLL
Note: Please try and register all the files. While registering each .DLL file you should get a "succeeded" message. If you encounter any error message, please let me know the exact
wording.
If the issue persists, let's move on to the steps below to verify Windows Update services and temporary folders.
Step 2: Verify the relevant Windows Update services
========================================
1. Click Start->Run, type "services.msc" (without quotation marks) in the open box and click OK.
2. Double click the service "Automatic Updates".
3. Click on the "General" tab; make sure the "Startup Type" is "Automatic". Then please click the button "Stop" under "Service Status" to stop the service.
4. Then please click the button "Start" under "Service Status" to start the service.
5. Please repeat the above steps with another service: Background Intelligent Transfer Service.
If it still does not resolve the issue, let's proceed to step 3.
Step 3: Reload the Windows Update temporary folder
========================================
One possible cause is that the temporary folder for Windows Update contains corrupted files. Let's erase all the files there to get the system clean.
1. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.
Net stop WuAuServ
2. Click Start, Run, type: %windir% and press Enter.
3. In the opened folder, rename the folder SoftwareDistribution to Sdold.
4. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.
Net start WuAuServ
Please test the issue again via the Windows Update website and let me know the result. If the issue persists, to clarify the issue and provide more accurate troubleshooting steps,
please assist me in collecting the following information.
How to capture a screenshot
======================
1. When the error appears, please press the Print Screen key (PrtScn) on your keyboard.
2. Click Start, click Run, type MSPAINT, and click OK.
3. In Paint, click Paste under the Edit Menu, click Save under the File menu, type a file name for the screenshot, choose JPEG as "Save as type", click "Desktop" on the left pane, and click Save.
How to collect System Information
==========================
The System Information can provide us with more information about the current status of the system. I would like to check it for you. Please send it to me using the following steps:
1. Click "Start", go to "Run", type in "MSINFO32" (without quotation marks) and press Enter to start System Information.
2. On the popup window, on the menu bar, click "File", and click "Save to"; save it as an NFO file, such as "system.nfo" to your local Desktop.
3. Find the file, right-click on this file, click "Send To", and click "Compressed (zipped) Folder".
How to collect the Windows Update log file
================================
Note: Since there are two Windows Update log files with similar names, please be aware that I am requesting the "WindowsUpdate.log" file without a space in the middle of the name.
1. Click on Start, Run and type "WindowsUpdate.log" (without the quotes)
2. Click on the OK button. We will see a file named "WindowsUpdate.log"
3. Now click on the "File" menu and then click on the "Save As" and select "Desktop" in the "Save in" option on the top of the window.
4. Click on the Save button. The file will be saved to your Desktop.
Please upload the above files to
https://sftus.one.microsoft.com/choosetransfer.aspx?key=0fd9ebfc-9943-44db-9c18-f2bd879208ba
Password: hF6!vkC-6QBf4Q
Tim Quan

Server side TAF services not working

Hi,
I configured a clustermanaged services with failover methos='basic' and failover type=select,
but when I check the view gv$session, there are many session connected to this service with failover method and failover type NONE.
below is the output when I query dba_services
select service_id,name,failover_method,failover_type from dba_services where name='ODCSE'
service_id name failover_method failover_type
5     XXX     BASIC     SELECT
and in the gv$session
SERVICE_NAME FAILOVER_METHOD FAILOVER_TYPE
     XXX      NONE     NONE
     XXX      NONE     NONE
     XXX      NONE     NONE
     XXX      NONE     NONE
is there anything to do with the client program connectivity?
Thanks
pjsiong

Hi,
The service is running, and if I connect using sqlplus, it will get the failover mode and type.
But if it connect thru our VB application, the failover type and mode is NONE.
That's why I suspect there is some client connectivity constraint.
Rgds
Pjsiong

My center and side speakers are not working with my gigaworks 7.1 with a sb live 5.1 soundcard?

There doesnt seem to be any sound coming out of my center and side speakers. I have an sb live 5. sound card. Pls help.
Thank you.
I have tried changing the setting the settings to 5.1 on my speaker creative panel and upmixing to 7.1 but no luck.

hyper-dood,
Make sure you have enable CMSS in playcenter for the sound card. Next, check that the upmix function in the speaker volume control pod and set to 5.1->7.1 upmix.
Jason

HT201412 Safari could not open the page because the server stopped responding- new ipad mini's (2 from separate places) are not working with At & T router but computers work. Can you please help me. I've tried everything. Thanks ya'll!

Safari could not open the page on my new ipad mini's because the server stopped responding- new ipad mini's (2 from separate places) are not working with At & T router but computers work fine. Yesterday I got it to work. Weird. Can you please help me. I've tried everything. Thanks ya'll!

Hello SavannahSweetie,
I was looking into the issue you are desribing, and found a great article for troubleshooting wifi connections with iOS devices. It's called iOS: Troubleshooting Wi-Fi networks and connections and can be found here: http://support.apple.com/kb/ts1398.
Start with this section, and work your way down if needed.
Basic troubleshooting
Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.
Verify that you are in range of your Wi-Fi router or base station.
Confirm that your Wi-Fi router and Cable/DSL modem are connected to power and turned on.
Check whether other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Update your Wi-Fi router to the latest firmware.For AirPort Base Stations, refer to this article for information about firmware updates. For third-party Wi-Fi routers, check the manufacturer's website for details on updating your firmware.
Restart your iOS deviceHold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
All the best,
Sterling

Does anyone know why my side volume buttons are not working

My side volume buttons are not working, How do I fix it

i can relate...it's frustrating! i suddenly have that same issue, as well as my off button isn't working....my phone was functioning just fine until my granddaughter played with it for about 5
minutes> that's all it took, the volume & off button didn't work when she gave it back to me. call it coincidental...who knows, and know one seems to know the FIX. but i can tell you that if your sound setting is ON, then that's not going to fix the problem. i've even reset my phone from settings, but that didn't resolve the issue either. the next step would be to plug into itunes & do a factory restore.....but i read someone tried that and it didn't work either, so good luck getting a resolution for this...:)

Usb driver on the left side near the lan are not working

The brightness keys are also not working and the usb drives on the left near the lan are not working.

Hi:
Did you reinstall the operating system?
If so, you are probably missing the graphics and USB3 drivers.
Graphics:
File name: sp56458.exe
USB3: Download and install both of these drivers and reboot.
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_125616_1&swEnvOid=405...
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_123787_1&swEnvOid=405...
If there is a device labeled SMBus Controller in the device manager, this driver should work for that device.
http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=cp_119081_1

Formula Columns are not working in Reports 10g

Hi,
We converted the reports developed in Reports 6i to Reports 10g. When we run the report in Reports 10g Builder everything works fine. But when we deploy the same report in Oracle Application Server and invoking the report the formula columns are not working ie., the fields/ placeholder columns which are based on the formula column are not displaying any values in the report.
Please, someone help us in this regard.
Thanks & Rgds,
M T

What version of Reports do you use..???
Greetings...

Data Services- The job server you selected is not working

Long Text:
After logging in to the Data Services designer,when try to run a job it shows error -The job server you selected is not working
Latest Software version -BODS 4.0 SP2
Reproduce Steps:
1. Double click on the Project from repository, it will display the project in Project area.
2. After that it will display all the jobs under the project.
3.Right click on the job and try to execute, then it will display the "Execution Properties" windows.
Here the we can the default Job Server has been selected.
4. Try to click ok to execute the job and then we get the error-"The job server you selected is not working"

Hi
Please contact your Data services administrator to check on the server why the job server is not working.
There might be several issues like connectivity with the repository, access details , mapping in the management console etc.
And let us know the exact issue.
Regards
Puneet

SharedServices and Workspace URL's are not working in EPM System 11.1.2.2

Hello,
SharedServices and Workspace URL's are not working in EPM System 11.1.2.2
I have installed EPM system V11.1.2.2 in single server environment (MS 2008 Server R2) with following components:
* Foundation Services
* HFM
* FDM
Have used embedded Weblogic server as application web server and Oracle HTTP server as web server. The installation was successful.
While configuration,
1) I selected the option to deploy web applications SharedServices and Workspace to a single managed server. The applications got successfully deployed to EPMServer0.
2) Also, I selected to configure Oracle HTTP server as web server.
Both these steps were successful.
But SharedServices and Workspace URL's are not working. Getting 404 error.
SharedServices : http://inmum01hyp05.internal.vodafone.com:19000/interop/index.jsp
Workspace : http://inmum01hyp05.internal.vodafone.com:19000/workspace/
When I checked Weblogic admin console, EPMServer0 is in SHUTDOWN state, tried to start it but it goes in ADMIN state instead of RUNNING.
Checked EPMServer0 log at "D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs" and found the error given at the end of this message.
Can anyone please suggest a solution for this.
####<Jun 6, 2013 11:43:20 AM IST> <Emergency> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499200246> <BEA-149259> <Server 'EPMServer0' in cluster 'EPMServer' is being brought up in administration state due to failed deployments.>
####<Jun 6, 2013 11:43:20 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499200902> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceHttps for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201090> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceJms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201090> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseService for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201106> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Jms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201121> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12 for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201121> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Https for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebLogicServer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201137> <BEA-000256> <Invoking weblogic.transaction.internal.StartupClass.main(null)>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201168> <BEA-149059> <Module dms.war of application DMS Application [Version=11.1.1.1.0] is transitioning from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201168> <BEA-149060> <Module dms.war of application DMS Application [Version=11.1.1.1.0] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:22 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499202402> <BEA-149059> <Module /inspection.wsil of application wsil-wls is transitioning from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:22 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499202402> <BEA-149060> <Module /inspection.wsil of application wsil-wls successfully transitioned from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:44:13 AM IST> <Info> <Diagnostics> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1370499253433> <BEA-320000> <The Diagnostics subsystem is initializing on Server EPMServer0.>
Thanks in advance.
Tej

Hi John,
today's update:
* Uninstalled EPM system V11.1.2.2 completely and after rebooting the server installed EPM system V11.1.2.2 again.
* During configuration, deployed SharedServices and Workspace to single managed server EPMServer0 on Weblogic server and configured to Oracle HTTP server as web server. Configuration seems successful.
* Started EPM system.
* checked Weblogic admin console - EPMServer0 goes into ADMIN state from STARTING.
* Checked EPMServer0 logs at "D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs" and found the error given below:
####<Jun 7, 2013 2:12:14 PM IST> <Error> <Deployer> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594534718> <BEA-149205> <*Failed to initialize the application 'SHAREDSERVICES [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: epm-hss-libraries, exact-match: false]..*
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: epm-hss-libraries, exact-match: false].
     at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
     at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
     at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
     at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
     at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
####<Jun 7, 2013 2:12:15 PM IST> <Warning> <J2EE> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594535124> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: epm-bpmui-libraries, referenced from: D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\WORKSPACE_11.1.2.0\riys07]. Make sure the referenced optional package has been deployed as a library.>
####<Jun 7, 2013 2:12:15 PM IST> <Error> <Deployer> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594535186> <BEA-149205> *<Failed to initialize the application 'WORKSPACE [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.applcore.model, exact-match: false], [Extension-Name: xerces, exact-match: false]..*
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.applcore.model, exact-match: false], [Extension-Name: xerces, exact-match: false].
     at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
     at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
     at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
     at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
     at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
Can you please suggest how to overcome this error of Weblogic?
Thanks in advance,
Tej

"itunes could not contact the ipod software update server because you are not connected to the internet" Help?

Hello all, new to the forums.
I've been recieving the error message "itunes could not contact the ipod software update server because you are not connected to the internet". This problem didn't occur at all for the past 2 years of using itunes.
I've already scanned through numerous websites and forums for help, but none of them worked.
This set of instructions resulted in no change to any of the problems, though iTunes lists that as the supposed solution.
# Open Internet Options from control panel.
# Click the Connections tab.
# Click the LAN Settings button.
# Select the Automatically detect settings checkbox.
Others include installing IE7, which that didn't work either.
Can anyone help?

Here it is:
Microsoft Windows 7 x64 Ultimate Edition (Build 7600)
LENOVO 2537FC4
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 003DB3100363E3C0
Current user is not an administrator.
The current local date and time is 2011-06-16 17:03:57.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA NVS 3100M
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.3.1.55 (x64) is currently running.
iTunesHelper 10.3.1.55 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {505BB17D-FA14-4FA0-9D77-F7998FEBB435}
Description:          Intel(R) Centrino(R) Advanced-N 6200 AGN
IP Address:          192.168.0.3
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.0.1
DHCP Enabled:          Yes
DHCP Server:          192.168.0.1
Lease Obtained:          Thu Jun 16 16:54:56 2011
Lease Expires:          Fri Jun 17 16:54:56 2011
DNS Servers:          192.168.0.1
                    68.94.156.1
Adapter Name:          {610821DE-0532-4C65-839B-B74B65859FBA}
Description:          Intel(R) 82577LM Gigabit Network Connection
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Wed Dec 31 16:00:00 1969
Lease Expires:          Wed Dec 31 16:00:00 1969
DNS Servers:
Adapter Name:          {10983C8A-FCDA-4B2F-8A89-E1596BA6B7BA}
Description:          Bluetooth Device (Personal Area Network)
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Wed Dec 31 16:00:00 1969
Lease Expires:          Wed Dec 31 16:00:00 1969
DNS Servers:
Active Connection:          Broadband Connection
Connected:          No
Online:                    No
Using Modem:          Yes
Using LAN:          No
Using Proxy:          No
SSL 3.0 Support:          Enabled
TLS 1.0 Support:          Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-06-16 15:35:33.

SHAREPOINT 2013 WITH SQL SERVER 2012 REPORTING SERVICES - NOT WORKING

The SQL 2012 with SP1 is installed but the Reporting Services are not working and not able to connect the Sharepoint with it.
i also TRIED TO install THE ADD-ON (rsSharePoint.msi) but it doesn't connect and show the Sharepoint Mode and cannot connect the Reporting services.
If I install the Reporting Native feature then the reporting service config displays the Instance else doesn't show and connect to the sql server.
But I am able to access the Configuration manager and TCP/IP are enabled.
I have installed SQL 2012 and Sharepoint 2013. Please revert soon.
Tks - Vinay

Reporting Service
http://msdn.microsoft.com/en-us/library/jj219068.aspx
http://blogs.msdn.com/b/biblog/archive/2012/12/04/installing-and-configuring-sql-reporting-services-on-sharepoint-2013.aspx
http://blogs.msdn.com/b/psssql/archive/2011/02/18/sharepoint-adventures-setting-up-reporting-services-with-sharepoint-integration.aspx
http://dinesql.blogspot.in/2010/06/configuring-reporting-services-2008-r2_07.html
http://www.codeproject.com/Articles/355461/Dynamically-Pointing-to-Shared-Data-Sources-on-SQL
http://www.heysharepoint.com/problems-with-sql-2012-reporting-services/
http://andrewcbancroft.com/2012/06/30/troubleshooting-sql-server-2012-reporting-services-and-sharepoint-2010-integration-part-1/
Please find the helping URL
Thanks
Jaison A
http://infomoss.blogspot.in

The contacts in the ear phone hole are not working anymore!

I have a Movie IPOD...I guess 5th gen. Its about 3 years old, I take good care of it. I have my ear phones for when Im out of the car, and a cord for my car radio that plugs into the ear phone hole. Well all of a sudden the ear phone hole and its contacts inside of it, are not working properly. I only get sound out of the left side of my car speakers and me ear phones. It has no warrenty and I am just wondering please tell me there is a place where such things can be fixed. Please tell me that I can take it to an apple store and get it repaired, like same day type thing.
Thank you...

I have the exact same problem, sound only comes from left side unless you juggle wire, twist it etc. i now spend more time trying to get it to work right then actually listening to it. So I believe it is time for a new Ipod. Apple wont replace any internal parts but will send you a new/ refurbished ipod identical to yours for around $125. You will, however, need to reload all songs, pictures, etc. 3rd party sites will sell you a new headphone jack for around $100 but most require you to install it yourself. Opening the Case will void the warranty. Which brings up another good point: if you still have a warranty (1 year from Apple, possible store/ credit card extension) use it. Your final option is to give your ipod to an apple store where they will recycle it for you and give you a 10% discount on a new Ipod of your choice. This has made me lose faith in Apple. I have had 2 ipods which both stopped working in less than 2 years. i love apple design and interface but quality is low. hope this helps!!
Message was edited by: dwdrummerdave

TS4057 I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What d

I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What do I do?
I also got Motion and can't figure out how to use it with Final Cut Pro X. Any help woud be great. Thanks

I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

"Validation" enabled for the composite and my testsuites are not working

I have posted the below issue in Test suite in JDEV - Studio Edition Version 11.1.1.2.0 But I felt that this is the right forum, so posting this again here:
I have mediator calling bpel. Mediator is exposed as web service. Whenever I run the service using "Test" button on EM with validation turned on
then it works and the process will be completed.
But I have initiate xml in the test suites. I select "UnitTests" and select my test case xml that was associated to "Initiate Message for operation",
I see that the process is still in the "Running" state. I put in exactly the same values as I use for testing the service from EM.
Did anybody face this issue? This happens only when we turn the validation to "Enabled" in EM.
I have "Validation" enabled for the composite and my testsuites are not working. When I test using unit tests, I am only seeing "Running" status of the processes and these are not getting completed.

Hello there, RevDebMN.
The following Knowledge Base article is always a great fallback article for troubleshooting Mail issues:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Particularly useful, in your case:
Mail Connection Doctor shows one or more red dots () in the account Status column
Check your Incoming IMAP or POP and Outgoing SMTP email account settings
Use Apple's online Mail Setup Assistant to discover what the correct settings should be for both your Incoming (IMAP or POP) and Outgoing SMTP email servers. If your email service provider is not listed in the Mail Setup Assistant, visit your email service provider's website or contact their support staff to get the correct settings. You can use this "cheat sheet" when asking your email service provider about the settings you need.
After you have the correct email service provider settings, make sure Mail is configured properly.
Click here if your Incoming and Outgoing email account settings are correct, but the issue persists
What alert message is shown in the Mail Connection Doctor "Details" column affected account?
Click here if a "Could not connect to this (server type) server…" message appears
Click here if a "Trying to log in to this (email server provider name) account failed…" message or any other error message appears
If the issue persists, then you'll want to remove the account and then add it again using this article:
Mail (Mountain Lion): Remove accounts
http://support.apple.com/kb/PH11794
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Server side mailrules are not working!

Similar Messages

Maybe you are looking for