Server software is not seeing the .nbi sets in Library/NetBoot/NetBootSPO

The server software is not recognizing the .nbi sets that are located in Library/NetBoot/NetBootSPO. When trying to turn on the NetInstall service I receive an error that there are no images installed.

alright I managed to solve my problem. I didnt realize the ***.nbi had to be placed Library/NetBoot/NetBootSP0
I made the mistake of making the .nbi folder a sub folder and not the parent. So now I can see the image in the Images tab.
thanks for the help.

Similar Messages

Install Software Does Not See the Router

Trying to install a WRT54GX4 using a DSL modem with Windows XP.
Every time that I get to the point (both the CD and the "Easy Install download) where the software is supposed to find the router I get a message that says that the wireless broadband router is not in the network. The power on, Internet, WLAN, and Ethernet lights are all on on the router.
I am an experienced computer user and have used Linksys wireless products before and have done everything that I know how to do other than manually install the puppy. Everything has been connected properly and in the correct sequence.
Thank you,
Ag

I am having the same problem. I tried the setup using instructions from the CD included with the router, from a version of the setup downloaded from the LinkSys site, and using the interactive utility at the web site. Everything flows smoothly along until it always fails with a message that it does not recognize that there is a wireless router connected. I tried the online chat help from LinkSys but this was challenging since I only had a single machine and single internet conection and couldn't maintain the connection for the chat session.
I have a Westell DSL modem from BellSouth and they did confirm that my LinkSys wireless router should work OK with my existing DSL service.

After downloading, install software does not see the internet.

Has anyone dealt with this issue, Please advise.

Go to system prefs>security and privacy>firewall and make sure that PSE is allowed out.

I have iPhone4 with updated software 6.0.1. Voice nevigation for map is not working. I could not see the voice options in setting/mapp.

I have iPhone4 with updated software 6.0.1. Voice nevigation for map is not working. I could not see the voice options in setting/mapp.

Voice navigation is not available for the iPhone 4

Software does not find the Database server

Hi all,
We are going to move database from old server MSSQL 2005 Express to the MSSQL 2008 R2 STD. For test I backuped DB from old server then restored at the new one. For some reason the software does not find the new server.
I checked everything as from the link described:
http://blogs.msdn.com/b/walzenbach/archive/2010/04/14/how-to-enable-remote-connections-in-sql-server-2008.aspx?Redirected=true
Also at the new server we have another production DB that is running without any issues...
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected
host has failed to respond 195.30.95.163:80
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at OptoWare.OrderEntry.OrderInterfaces.WebReferenceOWEdix.OWEdixService.OWEdix_GetStatus(String custID, String password, String countryCode)
at OptoWare.OrderEntry.OrderInterfaces.EdixInterface.b(Object A_0, DoWorkEventArgs A_1)
2014-03-31 16:54:58,924 [1] ERROR OptoWare.OrderEntry.Controls.Config.ServiceControl - Connetction to FI1-sv-prod014\mssqlserver failed.
System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured
to allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at OptoWare.OrderEntry.Controls.Config.ServiceControl.i()

It looks like the connection is getting refused because of your application configuration.
Refer similar thread
http://forums.asp.net/t/1180127.aspx?A+connection+attempt+failed+because+the+connected+party+did+not+properly+respond+after+a+period+of+time+or+established+connection+failed+because+connected+host+has+failed+to+respond+
-Prashanth

TS2972 I have 4 Apple TV's. All set up to Home share. One will not see the computer. It is also the only 720 I have. The other three are 1080's. How do I get the 4th one (the720) to recognize my Mac?

I have 4 Apple TV's. All set up to Home share. One will not see the computer. It is also the only 720 I have. The other three are 1080's. How do I get the 4th one (the720) to recognize my Mac?

Need more information to help you, but I am providing some suggestions. Sorry if you are past these type of basic things. But didnt really have much to start with and understand your technical level to start with.
Have you got into Settings > Computers > Turned on Home Sharing (Note: You must use the some Apple ID used by the iTunes library on your MAC for them to see one another)
How is your MAC connected to the network vs the 720 ATV2? Is one WiFi and the other Ethernet? Have you tried switching the ATV2 to WiFi if Ethernet?
Has the MAC been restarted since this started happening? Same with your Router and any other networking device being used? Sometimes an IP conflict can arise in your networking and most consumer networking equipment does not know how to "self heal" without a reboot.
Make sure you have given those things a whirl and share back your results. Any other information you can provide, such as how you connect to your network from each ATV and MAC.

I am trying to update my iphone 3GS software but itunes just says that this is the current version of itunes, it does not see the phone update - anyone know how to get the phone updated?

I am trying to update my iphone 3GS software but itunes just says that this is the current version of itunes, it does not see the phone update - anyone know how to get the phone updated?

Mike
I have done that and it is through pressing that update, which tells me that there is anew version of iphone software, that the prompt comes telling me that this is the current itunes?

HT4623 I phone 5s with 7.0.4 software I can not see the caller ID while on the phone for call waiting.

I phone 5s with 7.0.4 software I can not see the caller ID while on the phone for call waiting. Any help???

The following may help: http://support.apple.com/kb/TS4268

I do not see the user interface for the Logic software instruments. I can hear them play through my midi keyboard but I cannot see them to adjust parameters. Please advise.

I do not see the user interface for the Logic Pro software instruments. I can hear them play through my midi keyboard but cannot see them to adjust the parameters. Please advise.

Couple of things - you can open the interface for any instrument or plug-in by double-clicking its insert slot on the channel strip. You can configure Logic to automatically open the interface for a plug-in when you first instantiate it in the preferences. Go to Logic Pro > Preferences > Display > Mixer, and check the box for "Open plug-in window on insertion".

HT4623 I do not see the option for software update in my general settings?

I have an iPad 2 and I am trying to update to iOS 6 but do not see the software update option in general setting

IPhone, iPod Touch, and iPad iOS Compatibility
     Device                                       iOS Verson
iPhone 1                                       iOS 3.1.3
iPhone 3G                                    iOS 4.2.1
iPhone 3GS                                 iOS 6.1
iPhone 4                                       iOS 6.1
iPhone 4S                                    iOS 6.1
iPhone 5                                       iOS 6.1
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1
iPod Touch 5                               iOS 6.1
iPad 1                                           iOS 5.1.1
iPad 2                                           iOS 6.1
iPad 3                                           iOS 6.1
iPad 4                                           iOS 6.1
iPad Mini                                      iOS 6.1
You cannot upgrade wirelessly until after you install iOS 5 or later.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

I do not see the Advanced choice in itunes to set up apple tv

I do not see the Advanced choice in itunes to set up apple tv

Welcome to the Apple Community.
If you are looking to enable homesharing it is now under the file menu in iTunes 11.

My preferences are set to 'show informational overlay' but when I scroll through events I do not see the date as I'm supposed to. I only see the date underneath the event. What am i doing wrong?

I so not see the date as I scroll through my events and I have my preferences set to 'show informational overlay'. They only date I see is below the event. What am I doing wrong?

Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
OT

PC not seeing the network and not being seen on the network

I set up a WRT54G to use as my network router. I have two pc's hooked up to it via wire, as the software used for the company requires this. 1 is my server, and there are no problems. I can connect to the Internet fine. The number 2 pc can connect to the Internet fine, but it can not see the network. Number 1 pc can not see the number 2 pc on the network. HELP!!! The work groups are the same, and I followed all the instructions hooking up. My laptop even hooks up to the wireless Internet. What do any of you think? Thanks

Check firewalls, and any virus suite that you may be using. Make sure that under trusted IPs you have check trust my network. You should be able to find that under personal firewall tabs in the virus suite.
Stlbluesfan30
Cisco Network Academy Student

Windows setup could not process the Catalog setting

Hi, I'm trying to deploy an image of Windows 8 Embedded using WDS (Windows Server 2012) and I find this message in client machine. It appears while boot image is loading...
I'm using an *.xml file to make an unattended installation, that I select from Client tab on my WDS server.
If I don't use any file installation is performed correctly.
Full message is "Windows setup could not process the <Catalog> setting in the unattend answer file.
See setup log files under [X:\Windows\panther] for details."
However, when I check this folder in Windows Server there isn't any updated log file...
My unattend.xml file contains:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="windowsPE">
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SetupUILanguage>
<UILanguage>en-US</UILanguage>
</SetupUILanguage>
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UILanguageFallback>en-US</UILanguageFallback>
<UserLocale>en-US</UserLocale>
</component>
<component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DiskConfiguration>
<Disk wcm:action="add">
<CreatePartitions>
<CreatePartition wcm:action="add">
<Order>1</Order>
<Type>Primary</Type>
<Size>25000</Size>
</CreatePartition>
<CreatePartition wcm:action="add">
<Order>2</Order>
<Extend>true</Extend>
<Type>Primary</Type>
</CreatePartition>
</CreatePartitions>
<ModifyPartitions>
<ModifyPartition wcm:action="add">
<Active>true</Active>
<Format>NTFS</Format>
<Label>System</Label>
<Letter>C</Letter>
<Order>1</Order>
<PartitionID>1</PartitionID>
<Extend>false</Extend>
</ModifyPartition>
<ModifyPartition wcm:action="add">
<Active>true</Active>
<Extend>true</Extend>
<Format>NTFS</Format>
<Label>Media</Label>
<Letter>D</Letter>
<Order>2</Order>
<PartitionID>2</PartitionID>
</ModifyPartition>
</ModifyPartitions>
<DiskID>0</DiskID>
<WillWipeDisk>true</WillWipeDisk>
</Disk>
</DiskConfiguration>
<WindowsDeploymentServices>
<Login>
<Credentials>
<Domain>*********</Domain>
<Username>Administrator</Username>
<Password>*********</Password>
</Credentials>
</Login>
<ImageSelection>
<InstallImage>
<ImageGroup>ImageGroup1</ImageGroup>
<ImageName>TCImage</ImageName>
<Filename>Install.wim</Filename>
</InstallImage>
<InstallTo>
<DiskID>0</DiskID>
<PartitionID>1</PartitionID>
</InstallTo>
</ImageSelection>
</WindowsDeploymentServices>
</component>
</settings>
<cpi:offlineImage cpi:source="wim:c:/discwin8e/sources/install.wim#Windows Embedded 8 Standard" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
Anyone know how to fix it?
Regards

Well, the setuperr.log contains (Check next image link, I can't add it using hyperlink or image):
http://oi61.tinypic.com/sxkjt5.jpg
I have tried to add a Catalog component, but I don't know that I should write in "sourceLocation".
Regards

I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's drop list, anyone has an idea as how to resolve this issue

I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's drop list, anyone has an idea as to how to resolve this issue

I'm not that familiar with how FaceTime works. I know how to set It up but I don't use it. I just know that you can't activate in the UAE. I believe that you can activate in any country that permits it's use. Whether you will need a new ID or not, I can't confirm.
You can Google this and get all sorts of articles on workarounds. Apparently if you set up a VPN you can use it in the UAE. Here is one article that I found.
http://talkfree7.blogspot.com/2010/09/how-to-facetime-voip-call-from-uae.html
I Googled "workaround for FaceTime in UAE" to find this.

Server software is not seeing the .nbi sets in Library/NetBoot/NetBootSPO

Similar Messages

Maybe you are looking for