Server stop replicating with cluster after crash

I have a 4 server FOG configured on Oracle Linux 5.
One of the secondary servers got pinned and froze up. Without being able to make it respond the only next step was to restart it.
After the server boots up, the server works normally but with replication issues, utuser and utdesktop wont replicate, new users created or deleted on the primary server are not reflected in the failed secondary one.
I have tried removing the server from the FOG and re-adding it as secondary agaun, but this only updates the previous changes in utusers and utdesktop database but not in real time, any new changes wont replicate back to the failed server.
Any ideas before burning and rebuilding this server?
Any ideas are welcome,
Thanks!,

Hi tridentmark,
Before we drain the node, we can set the Initial Host State as stopped, when it startup we can change it to started.
The related KB:
Specifying the Cluster Host Parameters
http://technet.microsoft.com/en-us/library/cc759273(v=ws.10).aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

PC Suite stops working with Bluetooth after Laptop...

I use PC Suite and Bluetooth to connect to my Phone. I use the Synchronise, and the Messages feature a great deal. It all works great after a reboot, and I think it's a real credit to Nokia that they provide this free and improve their standing compared to other manufacturers.
However, the latest versions of PC Suite have taken a backward step in hardware compatibility. Previously, no matter what state my laptop was in - ie rebooted, returned from hibernate or standby, the laptop would connect to my phone over Bluetooth, and synchronizing would happen. When my phone went out of range, the connection would drop, and when it came back into range, the connection would re-establish and synchronizing would start again - wonderful!
Now, this only works after clean reboot, and after I have manually clicked on "Get Connected". After my laptop returns from standby, if I try "Get Connected" I get the error:
"Cannot use the connection type. Check that all the needed hardware, software and drivers are available. (Code: OpenMedia)"
To get PC Suite working with Bluetooth after returning from standby I run a Repair, after which it works beautifully.
Is this a known fault? I have uninstalled and re-installed PC Suite and the BT Stack as recommended in other posts to solve other issues. My configuration is:
Operating system: Microsoft Windows XP
Nokia PC Suite: Version 6.82.22.0
Bluetooth Stack for Windows by Toshiba v4.00.23(D) SP2
Bluetooth Specification: Version 2.0, 1.2, 1.1
Many thanks...

Thanks for your response Miksu. You have pointed me to the right place. It is the connection manager that fails to recognise the BT stack that causes my problems. This is always resolved by a repair. It seems that the order of initiation is very important which may be why Luist has started to have the problem.
In my experience, once things stop to work, I've had to strip out any subsequent installs.
My PCSuite also stopped working after it installed cable connection manager (or something like that) without me asking. I found it in Control Panel->Add/Remove programs. I removed it and PC Suite started to work again, so I completely removed PC Suite then re-installed, and allowed it to add the relevant devices relating to my phone (about 4 devices alltogether) but alas this did not solve my "return from standby" issue. I think I need to remove PC Suite and then Bluetooth, and maybe something else before re-installing - I'll leave that for a rainy day.
Thanks again Miksu

Why do I sometimes get "Safari could not open the page because the server stopped responding" with WiFi but not cellular?

When my iPad is connected to the internet via WiFi I can pretty much browse without problems. However, there are certain instances where a web page is requested and I get, after a bit of time passes, “Safari could not open the page because the server stopped responding”. Repeated attempts to access these web pages via WiFi connection always yield the same results. However, if I turn off WiFi I can access the same pages almost instatntly via cellular connection. Any suggestions?

What is the URL which won't open?

Mavericks mail server stops distributing group email after a few hours of usage

I've been having problems with our Mavericks mail server ever since our upgrade with group mail.
The server will distribute group email for a few hour, then it simply stops working.
No error message, no bounces, and the server keeps the incoming mail in its incoming queue.
Restarting the mail services by either server.app or serveradmin mail stop; serveradmin mail start command like are the only way I can get it to continue to distribute the email. I suspect it has to do with postfix itself hiccuping? But this is a reproducable problem.
Mail filtering is on, score set to 6, 10 mb limit, spamhaus is active.
Looking for tips on how to stablize this service short of setting up cron job to restart the services every few hours.

I know this is not the fix you are looking for, but it's what I had to do, so I thought I'd share.
Hopefully, someone will be able to figure it out the "right" way!
I created this AppleScript that will stop and start the mail service every hour.
You can copy and paste it into AppleScript Editor, compile it and save it as an application. You can then run it. You need to run it from an administrator account and keep that user logged in.
If once an hour (every 3600 seconds) is too often, just change 3600 to however many seconds you want.
Be sure to change AdminPassword with the Admin user's actual password.
repeat
          do shell script "/Applications/Server.app/Contents/ServerRoot/usr/sbin/serveradmin stop mail" password "AdminPassword" with administrator privileges
delay 60
          do shell script "/Applications/Server.app/Contents/ServerRoot/usr/sbin/serveradmin start mail" password "AdminPassword" with administrator privileges
          delay 3600
end repeat

Server failed to join cluster after migration.

Hi
 
 After migration of weblogic server (wls1) from machine A (fwls1) to B (fwls2), wls1 logged the following: 
 Failed to join cluster wlscluster at address 239.192.2.1 due to: java.net.SocketException: Cannot assign
 requested address.
 java.net.SocketException: Cannot assign requested address. 
 Wls2 is part of wlscluster and it is working, so I think that multicast address must be fine. Does anyone know what can be reason for that exception ?
 
 
 Details:
 <ol>
 <li> Weblogic Server 9.2
 <li> wls1 is running at the fwls1 machine; wls2 is running at the fwls2 machine; wls1 and wls2 belong to cluster wlscluster
 <li> migrate wls1 to machine fwls2
 <li> in fwls2:/opt/.../wls1/logs/server.log I got an exception
 <li> fwls1 automatically stands up in fwls1
 </ol>
 Any help appreciated
 
 regards
 Lukas 
 WLS 9.2

hi
 the cluster adress includes ur manged servers listing adress and port number example
 10.192.11.12:6399 is managed1
 10.192.11.12:6400 is managed2
 then these servers under cluster the cluster adress is
 10.192.11.12:6399,10.192.11.12:6400
 multicast adress start from 237.0.0.0 if this used by some another user change this adress

Server stop problem with node manager

Hi ,
I get this error often when I try to stop a managed server via the nodemanager
from the admin console or from the weblogic.Admin command. The server does not
stop and it goes into an unknown state and I have to do a force shutdown
[java] Error: [Could not execute command shutdown for server xxx via the N e Manager
- reason: [__COMMAND_EXCEPTION__Request: failed to execute command ' utdown' on
server 'xxx - reason: '[Unable to send shutdown request to server.> ].]
[java] Start server side stack trace: [java] weblogic.nodemanager.NodeManagerException:
[Could not execute comman shutdown for server xxx via the Node Manager - reason:
[__COMMAND_EXCEPTION__ quest: failed to execute command 'shutdown' on server 'xxx
- reason: '[Unable o send shutdown request to server.]'> ].] [java] at weblogic.nodemanager.NodeManagerRuntime.executeCommand(NodeMa
gerRuntime.java:472) [java] at weblogic.nodemanager.NodeManagerRuntime.shutdown(NodeManagerR
time.java:86) [java] at java.lang.reflect.Method.invoke(Native Method) [java]
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(D amicMBeanImpl.java:732)
[java] at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicM anImpl.java:714)
[java] at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl ava:1557)
[java] at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl ava:1525)
[java] at weblogic.management.internal.RemoteMBeanServerImpl.invoke(Rem

Hi Anil,
A little more information might be helpful. Which version are you talking
about ? What is the server state when you issue the command ? Is the server
very busy. Are you able to get the server state from the nodemanager when
the server is running ? Are you able to communicate from admin server ->
nodemanager <-> managed server ?
cheers,
gaurav.
"Anil Jacob" <[email protected]> wrote in message
news:3fb16b7c$[email protected]..
>
Hi ,
I get this error often when I try to stop a managed server via thenodemanager
from the admin console or from the weblogic.Admin command. The server doesnot
stop and it goes into an unknown state and I have to do a force shutdown
[java] Error: [Could not execute command shutdown for server xxx via the N
e Manager> - reason: [__COMMAND_EXCEPTION__Request: failed to execute command 'utdown' on> server 'xxx - reason: '[Unable to send shutdown request to server.> .]
[java] Start server side stack trace: [java]weblogic.nodemanager.NodeManagerException:
[Could not execute comman shutdown for server xxx via the Node Manager -
reason:> [__COMMAND_EXCEPTION__ quest: failed to execute command 'shutdown' onserver 'xxx> - reason: '[Unable o send shutdown request to server.'> ].] [java] atweblogic.nodemanager.NodeManagerRuntime.executeCommand(NodeMa
gerRuntime.java:472) [java] atweblogic.nodemanager.NodeManagerRuntime.shutdown(NodeManagerR
time.java:86) [java] at java.lang.reflect.Method.invoke(Native Method)[java]
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DamicMBeanImpl.java:732)
[java] at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicManImpl.java:714)
[java] at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImplava:1557)
[java] at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImplava:1525)
[java] at weblogic.management.internal.RemoteMBeanServerImpl.invoke(Rem

Mail stops working with Exchange after VPN is launched and then stopped

Mail and Exchange is working fine for me on SL, except when I launch Nortel VPN / Apani to run a work app (other then mail), and then end the VPN session - apple mail doesn't connect to exhange anymore. If I restart the VPN, then it connects with exchange.
I prefer not to run the VPN as I don't need it 99% of the time (and Time Machine doesn't sync with Time Capsule if the VPN is up). I can't find a way to reset the connection or mail, so I end-up running the VPN all the time now, once I get stuck in this mode.
Anyone else seeing this behavior?

I have tried a number of things to get my HP1012 working under Snow Leopard and it will not work. neither will my Canoscan LIDE 200 unless I manually install the driver which HP says you cannot do for its printer. 10.6 may be intelligent but not very. Mac's idea of simple makes it too complicated to determine if and where there is a fault. You can't simply remove and reload the driver as per 10.5 Any ideas out there?

Voyager 510 Bluetooth stopped working with YouTube after 10.6 upgrade

I have been using a Plantronics Voyager 510 Bluetooth headphone for several months. On 10.5.8, it worked fine with all sound applications: Finder, QuickTime, Safari/Firefox, Skype, iTunes.
I recently upgraded to 10.6 (10.6.4 now) and sound works for all those applications except for sound from a web browser. When video, etc. is playing in the browser, I do not get any sound from the video playback, even though I can get the boops and bleeps when I hit the volume control keys, etc.
Anyone have ideas about what might have changed? (Actually I did notice that the Bluetooth menu item changed from "Use as Audio Device" (in 10.5.8) to "Use as Audio Device (Mono)" in 10.6, but I don't think that should have changed the audio for the web browser.)
Thanks.
Message was edited by: AntonioEsteban

Contact the headphone manufacturer to make sure they are fully compatible with Snow Leopard.

Mail crashes after it appears to go to the server as the wheel stops abruptly and the mail crashes

I am not able to rebuild the mail boxes unless I turn off my WiFi, which I have done.
I open Mail, the wheel starts to turn about two or three turns it then stops and the Mail program crashes with a report going to Apple.
I am considering going back to Leopard.
Funny thing is that it worked just fine for about 2 weeks with no hitch. Then it started crashing with the Mail app.
LarryB

I have having trouble with Mail also....have no problem with my phone or iPad, just my MBA. Very frustrating. spins and spins...try to quit, and have to force quit.

How to stop tabs re-opening after firefox crashes.........when it crashes and I have multiple tabs open, when re-starting firefox all of the tabs re-open too. How can I stop this?

Firefox crashes quite often, especially when I have multi tabs open. I usually have to use CTRL ALT DEL and end the process as Firefox stops responding.
My problem is not the crashing........it is the re-opening of the multiple tabs I had open, when normally it is one of them (not the home page) that caused the crash in the first place, so I cannot re-open firefox until I restart the pc, because every time I do it is the same story. Firefox tries to re-open all of the tabs and stops responding. I have looked in options but nowhere does it allow me to stop multiple tabs opening after a crash. If this continues, I will have to uninstall Firefox and stick to Chrome.

Set the pref browser.sessionstore.max_resumed_crashes to 0 on the about:config page to get the about:sessionrestore page immediately with the first restart after a crash has occurred or the Task Manager was used to close Firefox.
*http://kb.mozillazine.org/browser.sessionstore.max_resumed_crashes
That will allow you to deselect the tab(s) that you do not want to reopen, but will allow to reopen other tabs.
See:
* http://kb.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
* http://kb.mozillazine.org/Browser.sessionstore.max_resumed_crashes
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold (user set).
*Preferences can be reset to the default or changed via the right-click context menu.

TS1398 hi my ipad is connected to my wifi but it keeps coming up with safari could not open the page because the server stopped responding its saying this know matter what i try to open what am i doing worng please help

my ipad will not load any pages an after about 10 mins comes up with safari could not open the page because the server stopped responding but iam conected to wifi please help as i have been trying for 2 days now and is doing my head in

Does the iPod connect to other networks OK?
Do other devices now connect and work OK?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

J2EE Server stops with error code -1113

Hi all
My J2EE server stops after applying support stack 9 for SRM. It was working fine after applying stack 8 but after applying 9 and I restarted the server it stops and its not coming up. The log below of stdserver0_out file shows some security issues. Please review the log and let me know what can I do to fix this issue.
Thanks in advance.
stdout/stderr redirect
node name : server0
pid : 6340
system name : SRT
system nr. : 00
started at : Wed Jul 18 22:14:59 2007
[Thr 4600] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
SAP J2EE Engine Version 7.00 PatchLevel 108458.44 is starting...
Loading: LogManager ... 407 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 156 ms.
Loading: ThreadManager ... 16 ms.
Loading: IpVerificationManager ... 15 ms.
Loading: ClassLoaderManager ... 16 ms.
Loading: ClusterManager ... 125 ms.
Loading: LockingManager ... 62 ms.
Loading: ConfigurationManager ... 1719 ms.
Loading: LicensingManager ... 16 ms.
Loading: CacheManager ... 109 ms.
Loading: ServiceManager ...
Loading services.:
Service memory started. (15 ms).
Service trex.service started. (78 ms).
Service userstore started. (16 ms).
Service cross started. (0 ms).
Service file started. (140 ms).
Service timeout started. (78 ms).
Service jmx_notification started. (16 ms).
Service runtimeinfo started. (125 ms).
Service p4 started. (172 ms).
Service classpath_resolver started. (16 ms).
Service log_configurator started. (3469 ms).
Service locking started. (0 ms).
Service naming started. (281 ms).
Service failover started. (78 ms).
Service javamail started. (125 ms).
Service appclient started. (110 ms).
Service http started. (437 ms).
Service ts started. (141 ms).
Service jmsconnector started. (141 ms).
Service licensing started. (15 ms).
Service connector started. (250 ms).
Service iiop started. (187 ms).
Service webservices started. (469 ms).
Service deploy started. (4187 ms).
Service MigrationService started. (31 ms).
Service bimmrdeployer started. (15 ms).
Service configuration started. (31 ms).
Service dbpool started. (859 ms).
Service com.sap.security.core.ume.service started. (1031 ms).
Jul 18, 2007 10:15:12... ...xt.<init>(UserContextSpi, Properties) [SAPEngine_System_Thread[impl:5]_9] Fatal: Can not instantiate UserContext with given properties.
service security ================= ERROR =================
Core service security failed. J2EE Engine cannot be started.
com.sap.engine.services.security.exceptions.SecurityServiceException: Unexpected exception:
 at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:181)
 at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
 at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
 at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
 at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
Caused by: com.sap.engine.services.security.exceptions.BaseSecurityException: No active userstore is set.
 at com.sap.engine.services.security.server.UserStoreFactoryImpl.getActiveUserStore(UserStoreFactoryImpl.java:77)
 at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.update(LoginModuleHelperImpl.java:405)
 at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.<init>(LoginModuleHelperImpl.java:84)
 at com.sap.engine.services.security.server.SecurityContextImpl.<init>(SecurityContextImpl.java:58)
 at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:135)
 ... 5 more

Hi
Are you using LAC (Live Auction Cockpit ) ?
Try the following SAP OSS Notes ->
Note 726805 - How to switch LiveAuction 2.0 to pt to different backend svr
Note 903441 - System Copy of SAP Web AS 6.40 and 7.00 J2EE with LAC-WPS
Note 718383 - NetWeaver: Supported UME Data Sources and Change Options
Note 888921 Ability to override protocol,host & port for Live Auction
Note 888922 Recommendations - Reverse Proxy and Live Auction Server
Note 676706 SSO configuration: Live Auction 1.0 with Enterprise Portal
Note 686437 Added ability to override protocol, host, and port
Incase nothing works, try re-starting the J2EE Server. Else raise a Customer OSS message with SAP as well.
Do let me know.
Regards
- Atul

VPN Server broken with Windows after upgrade from Tiger.

Hey there
I use Tiger 10.4 Server on a PowerMac G4.
It has two network interfaces, one public facing with it's own static IP, and the other internal facing.
The VPN service works perfectly, and allows people to connect via L2TP and assignes them an IP on the internal facing subnet, and allows OS X and Windows clients to connect.
However after upgrading to Leopard, only Mac clients can connect, all the Windows clients connect, and although they get an IP and are able to ping destinations, attempts to connect to these destinations (some of which are web apps on port 80, others are file servers running Samba), they just sit waiting for ever.
I've experimented with this problem, and it appears to be a problem with MTU and packet fragmentation, however these settings appear to be the same between Tiger, which worked, and Leopard which does not work.
Does anyone have any experience with the new VPN Server in Leopard, and can offer me any advice on how to fix this problem? I'm currently downgraded to Tiger again until a fix can be found.

I had the same issue, among others, but I finally got everything to work eventually. It seems that if the IP range of the client connecting to VPN is in the same range of the server LAN, there will be connectivity issues, whether it be pcs and/or macs not being able to connect. The following set up got my VPN services working:
1. Get DNS and Open Directory working properly. When I did an upgrade, the Server Admin updated my zone files with a curious extra space, which killed DNS. For example, I had the name server as ns.company.private., but in the files it would say ns. company.private everywhere! I've been reading about various bugs in upgrading DNS, so I think it's best just to start DNS from scratch. But if you are upgrading, the following thread expalins how to go about setting up DNS and Open Directory: http://discussions.apple.com/thread.jspa?messageID=5957209&#5957209
2. Once you have Open directory users and dns working properly, then set up VPN. Give a unique IP range to the internal network (192.168.7.1/24) that other networks will not emulate. If you use 192.168.1.1, you will likely run into issues. You can always test this method out by changing the IP range from a remote location and trying to get in this way instead of changing the server. Also, be aware that if you use Gateway Assistant within NAT, it will automatically give you a 192.168.1.1/24 range, at least that's been my experience, and this always killed VPN for me. I would set up NAT manually to avoid problems.
3. Ensure that the DNS information under the Client Information tab is correct. For my server I have 192.168.9.1 as the nameserver, and company.private as the search domain. Then set up routing tables. Mine are 192.168.0.0:255.255.0.0 private and 0.0.0.0:0.0.0.0 public.
Also, when you restart the server, stop and restart VPN services, as there is some talk about the Tiger bug still being around, where VPN services are messed up upon startup. This all worked for me and a couple others that had similar server set ups. Hopefully this will work for you.

Server stops after sending successive email to groups.

Server stops after sending successive email to groups. Has happened several times, I have 15 groups, after sending to 13, I cannot send anymore, even the next day. Thanks for any help.

Are you running OS X Server here? (This question was originally posted in the OS X Server forum, but you're not referencing your OS X Server version or related details. Which leads me to suspect you might not be running OS X Server here.)
If you are not running OS X Server here and are using hosted email, you can use Connection Doctor within Mail.app to take a look at the connection processing that is occuring within Mail.app, but I'd suspect you are running into a mail server problem, or a mail server sending limit; possibly a mail-flood limit of some sort.
Please contact your hosting provider for assistance with this.
If you are running OS X Server and wish to troubleshoot this...
Bad DNS is a common cause of mail server errors.
Do not use a .local domain for your mail server DNS services, and do not use your ISP DNS.
To check this, launch terminal.app from Applications > Utilities and issue the following (harmless, diagnostic, no changes performed) command and see if there are DNS or network issues:
sudo changeip -checkhostname
You'll need to provide a privileged password, and you might get a one-time message about sudo use, and you'll then get an indication that no changes are required, or that there are DNS or network errors.
To check public DNS, issue the following commands, replacing example.com with your domain, and mail.example.net with whatever is returned by the first command, and 10.20.30.40 with whatever is returned by tge second command.
dig +short @8.8.8.8 MX example.com
dig +short @8.8.8.8 mail.example.net
dig +short @8.8.8.8 -x 10.20.30.40
The host name returned by the third command should match the host name used for the second command. (The 8.8.8.8 IP address is a Google DNS server, and the @ reference to that will bypass any local DNS setup you are using.)
To check the mail server itself, launch Console.app from Applications > Utilities and see what the mail server is chatting about — if anything — when the failures occur. Expurgate any private information and post a small representative sample of just the error — please don't dump a hundred lines of log output here.

TS1398 my problem is my iphone 4s is connected to the internet(wi-fi) with full signal strength but freezes when browsing and says "Cannot Open Page, Safari could not open page because the server stopped responding".

my problem is my iphone 4s is connected to wi-fi with full signal(3 bars) strength but freezes when browsing and says
"Cannot Open Page"
"Safari could not open page because the server stopped responding"
I already reset the iphone to its factory settings and erase all contents but still the browsing speed freezes or not searching at all. Sometimes it will work and fast but then the problem uccors every now and then. Iv'e been using iphone 4 for two years and I still have it and works fine compared to this IPHONE 4S.

Settings → scroll down to Safari → in Safari settings, I selected both Clear History and Clear Cookies and Data.
IF that does not work -
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Finally - if problem still present -
Go to Settings>General>Reset
Reset the network settings - you will need to add the password of your home WiFi in your phone once more
The device should turn itself off & back on then go into Settings>Wifi and join your network

Server stop replicating with cluster after crash

Similar Messages

Maybe you are looking for