Server stopped responding message when i try to connect to my wifi.

reset internet settings. turned on airplane mode and then off. did the forget this network and reconnected. hooked to pc and got upgrades (i think) did latest downloads, etc.

reset internet settings. turned on airplane mode and then off. did the forget this network and reconnected. hooked to pc and got upgrades (i think) did latest downloads, etc.

Similar Messages

  • Server stop responding message

    Why do I get "server stop responding message" on the internet. I have tried to connect wired and wireless and I get the same response off and on. When I reboot the cable modem and router it works for a while but goes back to the same.

    please see my post here
    http://discussions.apple.com/thread.jspa?messageID=6847739#6847739

  • HT203175 After upgrading to version 11.0.4.4 I get a "Itunes has stopped working" message when I try to start a movie on my PC. I have updated Quick time and previous version of Itunes worked great.

    After upgrading to version 11.0.4.4 I get a "Itunes has stopped working" message when I try to start a movie on my PC. I have updated Quick time and previous version of Itunes worked great.

    One thing is for sure, and that is if the only page i visit is the Google homepage (not logged in) or this site (mozilla forum), the problem does not occur, ever. I can't make it happen.
    If i visit yahoo.com (not logged in) (or ighome.com, logged in), as examples, it happens every time.

  • When I try to connect to my wifi a lock symbol comes up...what does that mean

    When I try to connect to my wifi on my iphone 4 a lock symbol comes up...what does that mean?

    The lock symbol doesn't go away when you join your network.  When you join it it will show a check mark next to it and a wifi symbol will appear on the top left of your screen.

  • HT5437 When I try to connect to a WiFi network that I need a screen pops up and says "The network you're attempting to join requires you to install a profile on your Apple TV." What does this mean?

    When I try to connect to a WiFi network that I need a screen pops up and says "The network you're attempting to join requires you to install a profile on your Apple TV." What does this mean?

    Yes, home sharing requires both to be on the same wifi network. As it stands access to the network requires the login via webpage, which cannot be done on Apple TV.  You will need to speak to IT in order to grant access for the device.

  • When I try and connect to my wifi, I get a response that says "unable to connect to my wifi" and it does not even ask for my password

    when I try and connect to my wifi, I get a response that says "unable to connect to my wifi" and it does not even ask for my password; thoughts?

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Do other devices now connect?
    Did the iPod connect before?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • TS1398 When I try to connect to the wifi it will not unlock. It will not even search for a network. I have reset the phone and reset the network. Any ideas.

    When I try to connect to the wifi it will not unlock. It will not even search for a network. I have reset the phone and reset the network. Any ideas.

    I Can do that for home but not at friends and work places, nobody else has any problem joining it!! I'm wondering if restoring factory settings will solve it but don't really want to do that as its a hassle to reinstall everything for it to not solve the problem!!

  • IOS7 : blank browser when i try to connect to a wifi signal. Someone knows the apple-urls that are called to add to a whitelist?

    I´ve a problem when i try to connect to a wifi signal, an external browser is launched and it goes blank.  Someone knows apple-urls that are called in this case?, i was thinking to add to a whitelist into my router.
    Thanks.

    Contact your it department.
    You are blocked by a firewall.

  • Firefox continually gives me a "not responding" message when I try to do anything

    '''bold text'''A couple of days ago I upgraded to Firefox 4.0. Beginning yesterday, Firefox opens very slowly if at all and then gives me a "not responding" message if I try to do anything. I am running Windows 7

    I would recommend that you do the following as a minimum:
    Power-down the modem, AirPort base station, and computer(s).
    Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
    Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
    Power-up your computer(s).
    If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
    Disconnect the AirPort base station from the Internet broadband modem.
    While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref:Resetting an AirPort Base Station or Time Capsule)
    After the base station resets, go ahead and power it back down.
    Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
    Continue with step 2 in the first set of steps.
    In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

  • Error message when i try to connect to SharePoint Store, when i click on Sharepoint Store in the site its throwing me below error message,

    Error message "Sorry, we can't seem to connect to the SharePoint Store. Try again in a bit."
    when i try to connect to SharePoint Store, when i click on Sharepoint Store in the site its throwing me above error message,
    In the log it shows
    Request to office.com with the following URL:https://hostname/sites/appcatalog/config15 caused an exception. 
    System.Net.WebException: 
    Request to office.com should be routed with url URL:http://office.microsoft.com/client/15/commerce/query  but 
     request to office.com is sent with following URL:https://hostname/sites/appcatalog/config15
    and the Response from office.com was null or its HTTP status code was not 'OK'. Actual status code: 'InternalServerError'
    An exception was thrown while running task 'GetOfficeMarkets'. Microsoft.SharePoint.SPException: Sorry, we can't seem to connect to the SharePoint Store. Try again in a bit.  
    Feature "Apps that require accessible internet facing endpoints" activated in the Central Admin  .
    kindly help on this issue

    Hi,
    For a better troubleshooting, I suggest to do as follows:
    1. Check whether the App management shared service add to the Farm, and we need to configure the Subscriptions setting service also.
    2. SharePoint Server IP Address excluded from the Websense.
    3. Restart the server.
    4. Please check as the link below.
    http://www.naumanahmed.com/2012/07/sharepoint-2013-app-management-service.html
    More information:
    http://msdn.microsoft.com/en-us/library/fp179919.aspx
    Best Regards
    Dennis Guo
    TechNet Community Support

  • Ipad Locked(forgotten passcode) and error message when I try to connect to itunes

    Ok so I've forgotten my passcode to my Ipad. I have tried too many times so now the screen says Connect to itunes. When I try to connect it there is a error message saying: Cannot connect to itunes becuase it is locked with a passcode. I have never used this itunes computer with my ipad so I haven't synced or anything. Is there anything I can do to  unlock my IPad? Thanks in advance.

    If you can't remember the Passcode, you need to restore the device from the computer it was last synced with.
    Follow the instructions for putting the device in recovery mode >  iPhone and iPod touch: Unable to update or restore

  • Hi - a new and confusing message when I try to connect my iphone with itunes on my laptop:  "this iphone cannot be used because the Apple Mobile Device Service is not started".  Any idea of my way out of this cul-de-sac??  Brian

    Hi, I'm getting a new and confusing message when I connect my Ipad/phone to my laptop:  "This iphone cannot be used because the Apple Mobile Device Service  is not started" ... any idea, anyone, how I get out of this cul-de-sac.  Brian

    try this http://melchoi.wordpress.com/tag/this-iphone-cannot-be-used-because-the-apple-mo bile-device-service-is-not-started/
    Hope it's gonna help

  • My macbook pro says connection lost when I try to connect to my wifi.

    I cannot connect to my wifi at home via wireless. It only works if I'm connected via ethernet cable. When I would attempt to connect to my wifi, it says connection lost. Does anybody have a solution? (not sure if this is helpful or not, but is says no network selected)

    I cannot connect to my wifi at home via wireless. It only works if I'm connected via ethernet cable. When I would attempt to connect to my wifi, it says connection lost. Does anybody have a solution? (not sure if this is helpful or not, but is says no network selected)

  • NOKIA OVI STOPPED WORKING MESSAGE WHEN I TRY TO LO...

    Hi everyone,this is my first post so please forgive my naivety,but what little of my hair is left I have nearly pulled out over the last few days.
    My problem is that I was prompted to upgrade my old Nokia Music to OVI and all seemed ok until a week ago.When I attempt to launch it won't,and I get the message "Nokia OVI player has stopped working" and windows will find a solution.
    When I look at the problem history the following message is displayed;
    Problem signature
    Problem Event Name: APPCRASH
    Application Name: NokiaOviPlayer.exe
    Application Version: 2.0.1106.0
    Application Timestamp: 4af442f4
    Fault Module Name: KERNEL32.dll
    Fault Module Version: 6.0.6002.18005
    Fault Module Timestamp: 49e037dd
    Exception Code: e0434f4d
    Exception Offset: 0003fbae
    OS Version: 6.0.6002.2.2.0.768.3
    Locale ID: 2057
    Additional Information 1: 4a87
    Additional Information 2: 27dc040dc858df15943ccf2657517250
    Additional Information 3: 731a
    Additional Information 4: 9e0cf07ab61f59a302a794fb9274f6f8Extra information about the problem
    Bucket ID: 1556499930
    Is there anyone out there that can give me an explanation of the above please,and what I can do next?
    Thanks
    Ian

    Well, I guess I'm just as ignorant, cause I've got the same problem, same error   Help please! In the meantime I switched to i-tunes.. very user-friendly!
    Message Edited by Yo_Rotterdam on 16-Dec-2009 07:18 PM

  • RH8 for Word gives "not responding" message when I try to add a hotspot

    Good afternoon.  I have been trying to add a hotspot or jump to
    RoboHelp 8 Word with no luck.  My computer keeps freezing and in a few minutes I will see that Word is "Not Reponding" on the blue bar at the top of the screen.  Any ideas?  Thanks.

    Hi there
    Wow... it's been last century since I touched RoboHelp for Word, but I do recall that it involves using Word macros to work the RoboHelp Magick. Have you ensured the Macro Security has been relaxed for this? Is this the first time you have tried using RoboHelp for Word? Or was it working fine and suddenly stopped?
    One other thing. What is your operating system?
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

Maybe you are looking for

  • Why did the most recent update set all my plug-ins to Ask to Activate and disable an Adobe one?

    Firefox update and none of my plug-ins were working till I went and changed them from Ask to Activate to Always Activate. This Adobe Acrobat NPAPI Plug-in says it needs to be updated but when I try it does not update. It returns to the same need to u

  • [SOLVED] GnuPG can't find keyserver

    I'm trying to import the key from the Tor Browser, following the instructions from https://www.torproject.org/docs/verifyi - es.html.en. When I run gpg --keyserver x-hkp://pool.sks-keyservers.net --recv-keys 0x4E2C6E8793298290 I get as output gpg: ke

  • Vacation Rule works for ALL but not for particular notification in Item typ

    Hi, I have a situation where Vacation Rule is Ignored when choose the select option in notification page of vacation rule and notifications were being sent to Original Approver (who created the vacation Rule) instead of delegate. Vacation rule is wor

  • Error message unknown device error (0x73, 0x03)

    I created a project in FCP and prepared to burn it in DVD Studio Pro but when I tried to burn it I got this error message : unknown device error (0x73, 0x03).  Does anyone have any brilliant ideas on how to burn this?

  • User adding extra form boxes

    Hello, I'm not sure what the exact parlance is here but can anyone advise me on how about doing the following? Like on many Airline websites the user can click a button to 'add another passager' or whatever and a new form box/form boxes pop-up undern