Server stucks at Applying Computer Settings after every reboot

Hello!
On one of our sites containing around 15 servers, whenever a terminal server is rebooted, it gets stuck on Applying Computer Settings for around 15 minutes. If it is un-joined from the domain then no issue. Moreover, once it is done with this delay, no time
delay is observed in user login. But after every reboot, 15 - 20 mins delay is always observed. Domain is the same at other sites and no issue is being observed else where.
OS: MS Windows Server 2008R2
Help Required

Hi,
Thank you for posting in Windows Server forum.
In addition, for a test please try to modify the behavior of HTTP.SYS to depend on another service being started first. To do this, perform the following steps:
1. Open Registry Editor
2. Navigate to HKLM\SYSTEM\CurrentControlSet\Services\HTTP and create the following Multi-string value:
DependOnService
3. Double click the new DependOnService entry
4. Type CRYPTSVC in the Value Data field and click OK.
5. Reboot the server
NOTE: Please ensure that you make a backup of the registry / affected keys before making any changes to your system.
More information.
KB 2004121
Hope it helps!
Thanks.
Dharmesh Solanki

Similar Messages

2008R2 RD Termimnal Server stuck at apply computer settings over an hour

Hi Everyone
I am currently experience issue with my 2008R2 RD Terminal Servers. Every time I reboot the server it stuck in the "Apply computer settings" screen for few hours. These RD Terminal server is part of our NLB cluster. User connect to the
RD terminal Servers via FQDN for the NLB cluster VIP . Each servers has dual network adaptor. The second network adaptor is link to a NLB cluster. If one of the servers stuck in the "Apply computer settings
screen" Open NLB manger from one of the RD Terminal server, NLB manager will end up not responding.
I have found a way to allow me to login to the problematic RD terminal server by disabling the network on the network adaptor of the vm. This allow me to login. Then I quickly re enable the network on the adaptor. Users complained when
they log in to that server stuck at "Apply computer settings" screen
We do have GPO policy apply to these terminal servers I have moved one of the RD Terminal server to another OU with minimum policy that makes no different.
Appreciate any advice
Thanks

I have managed to resolve the issue by going into safe mode and disable windows management instrumentation service after reboot I am able to login . remove VMware tools. restart the server. apply computer setting disappear. almost like something is conflicting
with VMware tools

Parallels Desktop getting Stuck on "Applying Computer Settings"

I get it installed and updated, but everytime I complete the installation of PC-cillin Internet Security 2006 and reboot, Windows XP hangs on 'Applying Computer Settings.'
Anyone have a clue what to due to advance it beyond this point? I have uninstalled and and reinstalled it already one and applied all updated.

No, I dont think so as I had XP running fine and in
fact even had it hooked into my local home Windows
2003 server on my home domain.
Has to be something with PC-cillin.
James, sorry, what I meant was your title says "Parallels Desktop getting Stuck", and to me it sounds like Parallels is working fine, its XP that is stuck on "Applying Computer Settings"? (could very well be PC-cillin, just not sure if Parallels is the issue)
Some Windows XP docs on it:
http://support.microsoft.com/kb/832161
(mentions trying to unplug the network cable to see if it loads that way)
http://steven.vorefamily.net/2004/06/windows-xp-hangs-applying-computer.html
http://microsoft.mailarchive.ca/public.windowsxp.security_admin/2004-10/2366.htm l
(DNS issues)
I don't see any specific issues mentioned on the Parallels board about PC-cillin, I guess the easiest thing is to boot into safe mode, remove PC-cillin completely and restart without it. I've run AVG on my XP copy running on Parallels with no issues. Good luck!
(you might also ask this on the Parallels forum board: http://forum.parallels.com/forum53.html

Windows Server 2008 hangs in "Applying computer settings" after installing Sharepoint 2010

Hi!
I have a server which is designated to be a Sharepoint server, I have successfully installed the server, SQL server R2 and Sharepoint 2010, but right after Sharepoint Server 2010 is installed the nex time I reboot the machine it hangs in "Applying computer
settings" I have tried reinstalling the server several times, improving the server specs.
The installations run just fine I can even see the sharepoint site, and make any configuration, the issue comes when I restart the server (for updates for example..)
Can someone help me with this issue?
Thanks in advance
Carlos R Vargas M

Hi,
It may take some time for configuration after the new installation. Please wait patiently. If it still hangs, please refer to the following article:
KB article 2379016
A computer that is running Windows Vista or Windows Server 2008 stops responding at the "Applying User Settings" stage of the logon process.
http://support.microsoft.com/kb/2379016
Tim Quan

Stuck on "Applying computer settings"?

I've got a three year old server running Server 2008R2 that has never shown any signs of a problem but today it blue screened and rebooted and after that it never gets to the login prompt getting stuck on this "Applying computer settings"
message.
I've read a number of threads about this and several suggested fixes including a Microsoft FixIt, but my problem now is that I can't seem to login in Safe Mode in order to run the FixIt or any other repair. Because this is the only DC in the domain I can't
login using the domain administrator account, then for some reason I also can't login to the local administrator account. The password for the local administrator is not the same as the password for the domain administrator and I can't find any record in the
folder that's kept on this server of what the local admin password was and the folder which should contain a password reset disk is missing.
Is there any workaround for this problem when you can't login in safe mode?
- Norm

"then for some reason I also can't login to the local administrator account" Domain controllers don't have local administrator accounts. When they are promoted to a DC, the 'local administrator' is the domain administrator.
"Because this is the only DC in the domain " OUCH! One of the many reasons Microsoft always recommends having at least two DCs.
Option 1. Go to your latest DC backup and recover, and hope that you have not made too many changes to your DC since your last backup. With a single DC, hopefully you were creating a new backup after each known change.
Option 2. Depending on what you thing you can do, boot into WinPE and manipulate files on the disk. Obviously, you will need to know the specifics of what you are trying to change. Sometimes the Fixit instructions provide the details necessary.
.:|:.:|:. tim

OS X losses many settings after every reboot

I have a macbook pro running 10.4.11 recently I have noticed that when I reboot many setting which were previously remembered are reset. Examples include the default applications (I use the program default apps), Endnote and iphoto think they have never been opened before and have lost all their recently opened files etc. Does anybody know where these settings are stored or why I'm losing them?
Thanks

Hi scobbie, and a warm welcome to the forums!
Endnote and iphoto think they have never been opened before and have lost all their recently opened files etc...
That part is really confusing, how could they possibly lose what they never had???
Let's start with Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
http://www.macupdate.com/info.php/id/15667
After installing, Reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
At least if it doesn't fix it, it'll eliminate a few questions.
Report outcome please.

Windows server 2008 R2 stuck at applying computer settings

Hello all:
i have seen other posts with this same problem, but none of them apply to my situation.
i have a set of virtual servers, mounted over Vsphere 5.5 running on XenApp, all basically with the same configuration, except for the hosted applications, however i only have problems with some of those servers.
i have tried:
placing the servers on an empty OU --no change
remove the native VMware network driver and install intel drivers --no change
created the registry key : HKLM\SYSTEM\CurrentControlSet\Services\HTTP\DependOnService
(value CRYPTSVC) --no change
run winsock on the affected servers --worked...after a week the same situationis present.
i tried changing the DNS server order -- worked
i then tried to bring the DNS servers to the established order, and the servers where able to boot propperly.
at this point im out of ideas!
sorry, i meant R2!

If I understand well, by tweaking the IP Settings DNS configuration, you were able to fix the problem.
I would recommend that you use the IP settings I recommended here: http://social.technet.microsoft.com/wiki/contents/articles/18513.active-directory-replication-issues-basic-troubleshooting-steps-single-ad-domain-in-a-single-ad-forest.aspx
As for the member servers / computers, make sure that they point only to internal DNS servers for DNS resolution. T troubleshoot DNS resolution, you can use
NSlookup with debug mode: http://social.technet.microsoft.com/wiki/contents/articles/29184.nslookup-for-beginners.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

User Stuck at Applying User Setting after Login

I have windows server 2008r2 remote desktop environment. All my users stuck at Applying User Setting after login. I disabled remote desktop network interface for some time, then enabled and all fine. Checked logs in detail and nothing unusual found.
Could anyone assist to avoid recurrence of issue.
Rox_Star

Hi,
Thanks for your comment.
Sorry for late response. How is everything going on?
Does both the issue happens on same server? Is that same server with domain joined?
The above question relates to your other post.
Server stucks at Applying Computer Settings after every reboot
From the issue it seems that DNS server is not getting properly communicate for the server and due to that reason you are getting slow connection response from the DC to connect. If you are using DHCP in your network, you need to check the DHCP server setting
also for properly assigned IP address to the server. You can run “ipconfig /all” and check the DNS setting on your affected server.
In addition to above one, you can edit the registry setting for a test and check the result.
1. Open registry editor with regedit
2. Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HTTP
3. On the Edit menu, point to New, and then click
Multi-string Value.
4. Type DependOnService, and then press ENTER.
5. Right-click DependOnService, and then click Modify.
6. In the Value data box, type CRYPTSVC, and then click OK.
7. Exit Registry Editor.
8. Restart the computer.
Actually there is Hotfix (KB 2379016) for server 2008 but you can try this solution for server 2008 R2.
Hope it helps!
Thanks.
Dharmesh Solanki

Can't get WRT54G to start up, gets stuck at "checking computer settings"

Can't get WRT54G to start up, gets stuck at "checking computer settings" at 99% Please help!
If I hit the escape key it will go to the password screen, it looks like the password is already entered for me so I hit enter, but then it just goes back to "checking computer settings" and won't go past 99% again.'
Sorry but the last post mistakenly said the wrong number so I posted this.

If you are running the install CD that came with the router, the behavior you describe is exactly what happened when I tried using the CD today. The CD didn't seem to work with my computer's fixed IP address (not in the 192.168.1.0 network.)
What worked for me was to set my computer to have the fixed IP address 192.168.1.2. Then I was able to contact the router using its web interface at 192.168.1.1 amd make the necessary settings.
The password had NOT been changed from the default despite the install CD software seemingly accepting a new password. The default password worked.
Paul

Windows 7 Pro taking a long time to "applying computer settings" before logging on with Group Policy w/Logs

Hi There,
We have been having issues with laptops hanging up at the screen where it says "applying computer settings" when the computer starts up. These laptops are used by 10-20 different students everyday. I have changed the registry to create the gpsv.log.
I will share the link to my google drive so you can see both of the logs from two computers.
https://drive.google.com/file/d/0B3bB31ELMko9eURUVnZHZHhSYW8/view?usp=sharing
https://drive.google.com/file/d/0B3bB31ELMko9WkNCSXJDT205SDQ/view?usp=sharing
Any help would be appreciated, thank you1

http://www.sysprosoft.com/policyreporter.shtml is the product of choice
in this case.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

After upgrading to Firefox 9.0.1, on first run after every reboot, the following warning apears for every installed Add-on. "Another program on your computer would like to modify Firefox with the following add-on"

After upgrading to Firefox 9.0.1, on first run after every reboot, the following warning appears for every installed Add-on.
"Another program on your computer would like to modify Firefox with the following add-on"
So, i have to "Enable" my installed Add-ons on each reboot.
Would you please help me !
P.S.: I found that these files (and some others) will be deleted on each reboot, and it happens on computer start up (not at shut down)!
extensions.ini
extensions.sqlite
extensions.sqlite-journal
And as i mentioned, i have the same anti virus on my laptop and desktop, but i have not any problem on laptop.

Do you have security software that acts like a sandbox or uses virtualization to restore files on a next boot?
See also:
*http://kb.mozillazine.org/Preferences_not_saved
*https://support.mozilla.org/kb/Preferences+are+not+saved
It is possible that there is a problem with the file(s) that store the extensions registry.
Delete the files extensions.* (e.g. extensions.sqlite, extensions.ini, extensions.cache) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
*https://support.mozilla.org/kb/Profiles
New files will be created when required.
See "Corrupt extension files":
*http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
*https://support.mozilla.org/kb/Unable+to+install+add-ons
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to do a compatibility check or see if there is a compatibility update available.

Iphone stuck at apple logo after every reboot?

I came to know d solution of first holding home and sleep button then press + button but why is it happening after every reboot i am doing?help

Hi kstbespoo,
Thank you for visiting Apple Support Communities.
It sounds like your iPhone won't get past the Apple Logo even after a reset.
If so, you may need to restore the iPhone with iTunes. Note you should have a good backup.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
5. If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
6. If the above steps do not resolve the issue, contact Apple.
Best Regards,
Nubz

Clients hangs at "Applying Computer Settings" for 10 + Minutes intermittantly

On a handful of our machines we are experiencing an issue with long hangs at Applying Computer Settings before getting to the logon screen.
I have checked for network and domain issues but everything seems to be working as expected and for the majority there hasn't been any issues.
I ran the userenv log and have received the following, most notably the long delay at 17:03:33...
http://boxorigin.com/gpsvc1700.log
I have read through a number of posts but am yet to find a resolution to this issue and would appreciate a "fresh set of eyes" on this one!
Thanks and kind regards,

Martin, thanks.
I had enabled GPSVC debugging and attached a link in my initial post. Thanks for the reference for the policy reporter, it makes the readability a whole lot easier.
Below is a small excerpt of where it appears my long wait is coming from, although correct me if i'm wrong but the problem could be somewhere else and it just so happens that it's at this of the boot process that it's brought to light due to a dependency
for example.
GPSVC(610.d5c) 17:03:33:085 Target = Machine
GPSVC(610.d5c) 17:03:33:085 Target = Machine, ChangeNumber 0
GPSVC(610.d5c) 17:03:33:085 Target = S-1-5-19 (C:\Windows\ServiceProfiles\LocalService)
GPSVC(610.d5c) 17:03:33:085 Could not find user by sid, finding user by session id
GPSVC(610.d5c) 17:03:33:085 Caller requesting for user notification/lock is from session 0
GPSVC(610.d5c) 17:03:33:101 Target = S-1-5-19 (C:\Windows\ServiceProfiles\LocalService), ChangeNumber 0
GPSVC(610.d5c) 17:03:33:101 Could not find user by sid, finding user by session id
GPSVC(610.d5c) 17:03:33:101 Caller requesting for user notification/lock is from session 0
GPSVC(610.70c) 17:10:53:799 Application complete with bConnectivityFailure = 0.
GPSVC(610.70c) 17:10:53:799 Signalling 1 Refresh Policy callers
GPSVC(410.c68) 17:12:22:628 gpGetFgPolicyRefreshInfo: Mode: 2, Reason: 0
GPSVC(410.c68) 17:12:22:628 gpGetFgPolicyRefreshInfo: Mode: 2, Reason: 0
GPSVC(610.d5c) 17:12:23:362 SID = S-1-5-21-1394944166-407642009-1363067100-1181
GPSVC(610.d5c) 17:12:23:362 bMachine = 0
GPSVC(610.d5c) 17:12:23:362 Setting GPsession state = 1
GPSVC(610.d5c) 17:12:23:362 gpGetFgPolicyRefreshInfo: Mode: 2, Reason: 0
GPSVC(610.f04) 17:12:23:362 UserPolicy: Waiting for machine policy complete event with timeout 600000 ms
GPSVC(610.f04) 17:12:23:377 GPLockPolicySection: Sid = (null), dwTimeout = 30000, dwFlags = 65538
GPSVC(610.f04) 17:12:23:377 LockPolicySection called for user <Machine>
GPSVC(610.f04) 17:12:23:377 Sync Lock Called
GPSVC(610.f04) 17:12:23:377 Reader Lock got immediately. m_cReadersInLock : 1
GPSVC(610.f04) 17:12:23:377 Lock taken successfully

Prevent the Internet Security Suite from scanning after every reboot

My Verizon Internet Security Suite is evidently set to scan everything after every reboot of the computer. My computer is rather slow anyway. But that ties up all the resources for about 15 minutes whenever I reboot the computer. It keeps tabs on things in real time. It's not necessary to scan after every reboot. Can I turn that setting OFF?

Hi Hermhart, Yes there should be an option to set that to off. try this link to see if this helps & let us know thanks Brett.
http://www22.verizon.com/ResidentialHelp/FiOSInternet/General+Support/Essentials+And+Extras/Question...
Brett
Verizon Telecom
Fiber Solution Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

Regular Kernel Panic after every Reboot

If anyone understands all this please help me shed some light on this KP situation after every reboot...
Thanks in advance!!!
Dump as follows: -
Interval Since Last Panic Report: 368538 sec
Panics Since Last Report:          3
Thu Mar 14 19:42:06 2013
panic(cpu 0 caller 0xffffff8007ab7bd5): Kernel trap at 0xffffff8007b0fd84, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x00000000000000e0, CR3: 0x0000000009859001, CR4: 0x00000000000606e0
RAX: 0xffffff8028d43808, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0x0000000000000002
RSP: 0xffffff81f7753b20, RBP: 0xffffff81f7753b20, RSI: 0x0000000000000001, RDI: 0x0000000000000000
R8: 0xffffff8007ee6f3f, R9: 0xffffff800b2cae90, R10: 0xffffff81d8b36000, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff8028f575d0, R14: 0xffffff8028d43808, R15: 0x0000000000000002
RFL: 0x0000000000010246, RIP: 0xffffff8007b0fd84, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x00000000000000e0, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff81f77537c0 : 0xffffff8007a1d626
0xffffff81f7753830 : 0xffffff8007ab7bd5
0xffffff81f7753a00 : 0xffffff8007ace4ed
0xffffff81f7753a20 : 0xffffff8007b0fd84
0xffffff81f7753b20 : 0xffffff8007d10152
0xffffff81f7753b60 : 0xffffff8007d156d1
0xffffff81f7753b90 : 0xffffff8007d15618
0xffffff81f7753c00 : 0xffffff8007d189fc
0xffffff81f7753c30 : 0xffffff8007b120af
0xffffff81f7753c60 : 0xffffff8007af18d3
0xffffff81f7753cb0 : 0xffffff8007af1021
0xffffff81f7753cf0 : 0xffffff8007af151a
0xffffff81f7753d70 : 0xffffff8007d05cfa
0xffffff81f7753dd0 : 0xffffff8007af9ff2
0xffffff81f7753e20 : 0xffffff8007af296a
0xffffff81f7753e60 : 0xffffff8007d650ee
0xffffff81f7753ed0 : 0xffffff8007d71b52
0xffffff81f7753f50 : 0xffffff8007de182a
0xffffff81f7753fb0 : 0xffffff8007aced33
BSD process name corresponding to current thread: launchd
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide:     0x0000000007800000
Kernel text base: 0xffffff8007a00000
System model name: iMac12,2 (Mac-942B59F58194171B)
System uptime in nanoseconds: 37921137367020
last loaded kext at 10959037157572: com.apple.driver.AppleUSBCDC          4.1.22 (addr 0xffffff7f89d84000, size 16384)
last unloaded kext at 11036672774831: com.apple.driver.AppleUSBAudio          2.9.0f6 (addr 0xffffff7f891fe000, size 266240)
loaded kexts:
com.focusrite.driver.usb2audio          1.4
com.serato.usb.kext          2.3.0
com.rogueamoeba.InstantOnCore          6.0.2
com.rogueamoeba.InstantOn          6.0.2
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AppleBluetoothMultitouch          75.15
com.apple.driver.AudioAUUC          1.60
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOBluetoothSerialManager          4.0.9f33
com.apple.filesystems.ntfs          3.10
com.apple.driver.AGPM          100.12.69
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleMikeyDriver          2.3.1f2
com.apple.driver.AppleHDA          2.3.1f2
com.apple.driver.AppleSMCLMU          2.0.2d0
com.apple.driver.AppleBacklight          170.2.3
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.kext.AMDFramebuffer          8.0.0
com.apple.AMDRadeonAccelerator          1.0.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.ApplePolicyControl          3.2.11
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.driver.AppleIntelHD3000Graphics          8.0.0
com.apple.driver.AppleIntelSNBGraphicsFB          8.0.0
com.apple.driver.AppleUSBCardReader          3.1.0
com.apple.driver.AppleIRController          320.15
com.apple.iokit.SCSITaskUserClient          3.5.1
com.apple.driver.AppleRAID          4.0.6
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.2
com.apple.driver.AppleUSBHub          5.2.5
com.apple.driver.AirPort.Atheros40          600.70.23
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.iokit.AppleBCM5701Ethernet          3.2.5b3
com.apple.driver.AppleAHCIPort          2.4.1
com.apple.driver.AppleUSBEHCI          5.4.0
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.driver.IOBluetoothHIDDriver          4.0.9f33
com.apple.driver.AppleMultitouchDriver          235.28
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.driver.DspFuncLib          2.3.1f2
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.iokit.IOAcceleratorFamily          19.0.26
com.apple.iokit.IOSurface          86.0.3
com.apple.iokit.IOBluetoothFamily          4.0.9f33
com.apple.iokit.IOAudioFamily          1.8.9fc10
com.apple.kext.OSvKernDSPLib          1.6
com.apple.driver.AppleSMC          3.1.4d2
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.AppleHDAController          2.3.1f2
com.apple.iokit.IOHDAFamily          2.3.1f2
com.apple.driver.IOPlatformPluginFamily          5.2.0d16
com.apple.driver.AppleGraphicsControl          3.2.11
com.apple.driver.AppleThunderboltEDMSink          1.1.8
com.apple.driver.AppleThunderboltEDMSource          1.1.8
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.kext.AMD6000Controller          8.0.0
com.apple.kext.AMDSupport          8.0.0
com.apple.iokit.IONDRVSupport          2.3.5
com.apple.iokit.IOGraphicsFamily          2.3.5
com.apple.driver.AppleUSBHIDKeyboard          165.5
com.apple.driver.AppleHIDKeyboard          165.5
com.apple.driver.AppleThunderboltDPOutAdapter          1.8.5
com.apple.driver.AppleThunderboltDPInAdapter          1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.5
com.apple.driver.AppleThunderboltPCIUpAdapter          1.2.5
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.1
com.apple.iokit.IOUSBMassStorageClass          3.5.0
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.driver.AppleUSBMergeNub          5.2.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.driver.CoreStorage          274.7
com.apple.iokit.IOAHCISerialATAPI          2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.iokit.IOUSBUserClient          5.2.5
com.apple.driver.AppleThunderboltNHI          1.6.0
com.apple.iokit.IOThunderboltFamily          2.1.1
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOEthernetAVBController          1.0.2b1
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOAHCIFamily          2.2.1
com.apple.iokit.IOUSBFamily          5.4.0
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7.2
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Model: iMac12,2, BootROM IM121.0047.B1F, 4 processors, Intel Core i7, 3.4 GHz, 16 GB, SMC 1.72f2
Graphics: AMD Radeon HD 6970M, AMD Radeon HD 6970M, PCIe, 2048 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
Memory Module: BANK 1/DIMM1, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.70.23-P2P
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: Wi-Fi, AirPort, en1
Network Service: VLAN (vlan0), Ethernet, vlan0
PCI Card: pci1b21,612, sppci_ahci, Thunderbolt@107,0,0
PCI Card: pci1b21,612, sppci_ahci, Thunderbolt@10,0,0
Serial ATA Device: WDC WD1001FALS-403AA0, 1 TB
Serial ATA Device: APPLE SSD TS256C, 251 GB
Serial ATA Device: OPTIARC DVD RW AD-5690H
Serial ATA Device: WDC WD20EARX-00PASB0, 2 TB
Serial ATA Device: WDC WD20EARX-00PASB0, 2 TB
Serial ATA Device: WDC WD20EURS-63S48Y0, 2 TB
Serial ATA Device: WDC WD20EURS-63S48Y0, 2 TB
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x850b, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Serato Scratch LIVE(c)2004, 0x13e5, 0x0001, 0xfa130000 / 6
USB Device: PTK-540WL, 0x056a (WACOM Co., Ltd.), 0x00bc, 0xfa120000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Scarlett 18i6 USB, 0x1235, 0x8004, 0xfd130000 / 6
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd140000 / 5
USB Device: Apple Keyboard, apple_vendor_id, 0x0221, 0xfd142000 / 7
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3

The following may work for you as a shortcut to testing, instead of fully uninstalling each of those programs. It may also fail for some, but that's the worst that will happen, and it may save you a lot of time.
For any of the possible culprit kernel extensions, it is not necessary to completely uninstall the parent program.
You can temporarily uninstall any .kext, which may be causing the problem, by doing the following: Open Terminal in Applications>Utilties and copy/paste
sudo kextunload
Important, leave a space after kextunload
Next, navigate to the /System/Library/ and select Extensions. Inside that folder, find the related .kext in question, which you should drag into the Terminal window. (After dragging it in, the file will stay where it belongs in its original location.) This will automatically fill the Terminal window with the name and path to the file.
This is an example only of what the full command will then look like; it will not necessarily be found on your computer.
sudo kextunload /System/Library/Extensions/PaceSupportFamily.kext/
Hit return. If you have never used the sudo prefix before, you will get a warning, which you can disregard. Then enter your admin password, which you won't see on the screen as you type it in and hit return. Wait for the $ sign prompt to reappear, which will indicate the extension has been unloaded. Then just close the window.
This will have the effect of disabling the program. If it fails to be the source of the problem, to reload/enable it, substitute kextload for kextunload, using the above procedure.
Other than that, have a look at this article on resolving kernel panics. Faulty RAM is a frequent cause.
http://www.thexlab.com/faqs/kernelpanics.html

Server stucks at Applying Computer Settings after every reboot

Similar Messages

Maybe you are looking for