Server switches on automatically after shutdown

We always shutdown our server for some electrical problem. but now We are facing a problem in our server which is automatically switched on after two hours.

Hi ettene,
Please first confirm you doesn’t setting some auto Power on option in your server BIOS and if you are using SCCM please confirm the Wake On Lan option has disabled.
The related KB:
How to Enable or Disable Wake On LAN for a Site
https://technet.microsoft.com/en-us/library/bb680723.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Messaging Server/UNIX: Starts automatically after installation

How can I configure Messaging Server to run automatically on startup?

In most cases, Messaging Server for UNIX will run at startup automatically.

Most UNIX systems have a start script that includes a line that starts sendmail
as a server (/usr/lib/sendmail -bd) automatically.
Howver, when Messaging Server is installed, it replaces several mail utilities (mailq,
processq, and sendmail), with links to our sendmail binary
(<ServerRoot>/bin/msg/admin/bin/sendmail).
Therefore, Messaging Server, rather than sendmail, starts when
your system starts.

This can be confusing to administrators of other Netscape servers since
most other Netscape servers are not installed to start automatically.

Note:

This does not take effect until the system is fully restarted. After
installing Messaging Server, restart the system before attempting to start
Messaging Server. Sendmail is usually already running, and the installer does
not kill the sendmail process.

If you start Messaging Server without
restarting, smtpd will not start due to a port conflict.

Hi Leo, thank you for your help
This:
I have tried the suggestion above (clear the "Run task as soon as possible after a scheduled start is missed" checkbox) and it does the trick for me. However on the Home/Get Started/Set up screen the "Set up Server Backup" task is then reset to outstanding
while the .../Quick Status screen shows "Server Backup ON".
Is a working work around till a real update or hotfix is released

Satellite Pro L40 PSL4BE restarts automatically after shutdown

Hi,
I have an issue where my laptop starts up automatically after seemingly going into hibernation and shutting down by closing the lid. (I have it configured so it goes into hibernation when i close the lid.)
The strange thing is that this only happens when it's hooked up to the power supply. If i close the lid when it's on battery power it goes into hibernation and remains shut down as it should.
This all started when i changed my power scheme from "Balanced" to "Performance". Setting it back to "Balanced" did not help, nor did setting it to the lowest setting. Also, it used to come back out of hibernation automatically after i opened the lid, this no longer happens either.
I am unsure of whether this is a software or hardware issue.
Over the weekend i've reinstalled the laptop using the supplied recovery discs and applied all updates and patches for Vista but the problem remains, so now i am leaning more towards it being a hardware issue even though i have no idea what kind of hardware malfunction could be causing this.
Does anyone have an idea of what could be causing this behavior?

Hello,
Thanks for the replies. I'm afraid i haven't found any solution yet.
Over the weekend I installed Ubuntu on this laptop and tried to hibernate but it demonstrated the exact same behaviour as under Vista. it shuts down and like 10 seconds after it boots back up. this leads me to believe that the problem is hardware related in some way. it would surprise me that both vista and a linux distro would have the exact same issues. So now i'm back on the Vista i restored using the restore discs.
I haven't tried installing a windows xp yet though i suspect i'll have the same issues.
@Sasha
The thing is that the problem isn't in windows hibernating or not shutting down when the lid closes. It does that part just fine. What it shouldn't do however is restarting by itself whithout my intervention several seconds after it shut down. no matter the setting, that can't be normal behaviour.
@borge & Jonnie
Have any of you already had contact with the toshiba helpdesk on this issue? if so, what did they say? i haven't had the time to call them yet.
I'll update as i find out more.

Weblogic Server Switch over automatically due to too many open files error.

Hi,
I am facing problem in production environment. I am using Weblogic 8.1 SP4 application.
Weblogic Server automatically switch over every 3 weeks due to few reasons.
1. out of memorry error.
2. Too many open files error.
Please see my below portalserver. log files. Kindly provide some good solution to solve this problem.
The following log is portalserver.log file
###<May 6, 2009 8:28:15 PM ICT> <Notice> <WebLogicServer> <ebizdr> <portalServer> <ListenThread.Default> <<WLS Kernel>> <> <BEA-000205> <After having failed to listen, the server is now listening on port 9001.>
####<May 6, 2009 8:28:15 PM ICT> <Critical> <WebLogicServer> <ebizdr> <portalServer> <ListenThread.Default> <<WLS Kernel>> <> <BEA-000204> <Failed to listen on port 9001, failure count: 1, failing for 0 seconds, java.net.SocketException: Too many open files>
####<May 6, 2009 8:28:15 PM ICT> <Error> <HTTP> <ebizdr> <portalServer> <ExecuteThread: '5' for queue: 'default'> <<WLS Kernel>> <> <BEA-101019> <[ServletContext(id=18480784,name=NBIAProject,context-path=)] Servlet failed with IOException
java.io.FileNotFoundException: /var/opt/weblogic/user_projects/domains/eBizPortalDomain/portalServer/.wlnotdelete/NBIAPortalApp/NBIAProject/images/go.gif (Too many open files)
 at java.io.FileInputStream.open(Native Method)
 at java.io.FileInputStream.<init>(FileInputStream.java:106)
 at weblogic.utils.classloaders.FileSource.getInputStream(FileSource.java:23)
 at weblogic.servlet.FileServlet.sendFile(FileServlet.java:563)
 at weblogic.servlet.FileServlet.service(FileServlet.java:206)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006)
 at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
 at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28)
 at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
 at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:293)
 at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
 at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6724)
 at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
 at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
 at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764)
 at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
>
####<May 6, 2009 8:28:16 PM ICT> <Notice> <WebLogicServer> <ebizdr> <portalServer> <ListenThread.Default> <<WLS Kernel>> <> <BEA-000205> <After having failed to listen, the server is now listening on port 9001.>
####<May 6, 2009 8:28:16 PM ICT> <Critical> <WebLogicServer> <ebizdr> <portalServer> <ListenThread.Default> <<WLS Kernel>> <> <BEA-000204> <Failed to listen on port 9001, failure count: 1, failing for 0 seconds, java.net.SocketException: Too many open files>
####<May 6, 2009 8:28:16 PM ICT> <Error> <HTTP> <ebizdr> <portalServer> <ExecuteThread: '5' for queue: 'default'> <<WLS Kernel>> <> <BEA-101019> <[ServletContext(id=18480784,name=NBIAProject,context-path=)] Servlet failed with IOException
java.io.FileNotFoundException: /var/opt/weblogic/user_projects/domains/eBizPortalDomain/portalServer/.wlnotdelete/NBIAPortalApp/NBIAProject/images/search_right.gif (Too many open files)
Thanks & Regards,
Suriyaprakash.V

Sorry for the late resp. Here's what dev suggests be investigated:
I would want to know:
Can they do a "$ORACLE_HOME/bin/dmstool -dump" and
save/compress/send the results?
Are there any errors printed in the Apache error_log while this leak occurs?
The customer could/should re-check their TCP settings, especially the TCP time wait interval and generally follow the TCP settings recommended in Chapter 5 of the iAS Performance Guide for 9.0.2.
Is there anything else interesting/unusual about the site?
Let us know how it goes.

Mac Mini restarts automatically after shutdown

This has been happening for a few months. (I have to run older Macs for Rosetta.) After the reboot, when I hit shutdown, it shuts down.
I looked at other forums and no one has an answer. The Mini otherwise runs fine. It's most annoying as I want to shut down and leave the office but have to wait for the reboot and then shut down a second time. Any ideas?

Try unplugging all USB and Firewire accessories (except for your mouse) from the Mac Mini and see if it will shut down properly.
If it does, plug one back in at a time and see which one is interfering with the shutdown!
What apps do you continue to run that need Rosetta?

WI FI switchs off automatically after 4.3 upgrade

Started facing these annoying problem after ios 4.3 upgrade.
Wifi switchs off when i leave my ipad without using it for like 20 min,
I used to keep ipad without using it like that for downloading apps at a time,but wifi will switch off.
Am really happy with 3.2.To be honest,These software upgrades are really degrading the device.
Any one facing same?Please give me any suggestions.?

Hi,
Tap Settings / General / Reset / Reset Network Settings.
Restart your iPad. Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPad. To turn iPad back on, press and hold the Sleep/Wake until the Apple logo appears.
See if that makes a difference.
Carolyn

My ipad 3 switchs off automatically after sometime?

My ipad 3 bought month ago switchs off itself and to get back I need hold home and ON button simultaneously.

Hello,
Try a restore, this should be a software issue.
Plug your iPad into itunes, put it on DFU mode and restore it (if you can)
Step One
Open iTunes and connect the iPhone to your Mac.
Step Two
Press and hold the Home button and the Sleep/Wake button at the same time.
Step Three
After exactly 10 seconds release the Sleep/Wake button. Continue holding the home button until you iTunes pops up a message telling you that it has detected an iPhone in recovery mode.
The iPhone screen will remain black.
If that is just impossible, change your ipad for another.
Hope you solve this problem!,
Cheers.

Z87 MPOWER reboots automatically after shutdown with latest BIOS

Hi!
I was having some problems with the RAM using XMP profile (CORSAIR CMD16GX3M2A1866C9 2*8GB 1866MHz Cl9). Mainly I had some occasional reboots at windows startup and some rare random blue-screens but it all went away after updating the BIOS to version 1.7 .
But now I'm having another issue. After shutting down the PC it turns itself on after 1 second. It only started to happen after the 1.7 update. Any ideas of what it might be?
Thanks in advance!
My PC specs:
CPU: intel core i7 4770k
COOLER: Corsair H60
MOBO: MSI Z87 MPOWER
RAM: Corsair CMD16GX3M2A1866C9 2*8GB 1866MHz Cl9
PSU: Corsair HX850
PSU: PNY GTX780 OC Enthusiast edition
SSD: Samsung 820 EVO 500GB
HDD: Seagate 7200rpm 3TB
SO: Windows 8.1 Pro x86-64

See that latest beta bios: https://forum-en.msi.com/index.php?topic=169826.msg1279904#msg1279904
Flash using the method and files to which I linked.

The bettry of my i pad was too low finally it was switched off automatically then i putted on charging but the charging is started after 5% it went on automatically after apple logo and shut down suddnly plz help me what i have to do i restarted but same

i putted my low bettry i pad on charging but after 5% bettry it is goint to switch off automatically after apple logo and then suddnlywent switched off .i restarted again and again but the result are the same i need urgent help plz

Hi there shehla sattar,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPad: Basic troubleshooting
http://support.apple.com/kb/ts3274
-Griff W.

How to get Mavericks server that is connected to a UPS to restart automatically after a power outage.

This is driving me crazy. Is there anyone running Mavericks as a mission critical server on Backup Power Supplies that has a way to get the servers to restart automatically after a power outage. The UPS vendors all have software for Windows, but not Macs, and the setting in System Preferences, doesn't work with the UPS's Iv'e tried (2 different APC models (Smart and Back-UPs), one Triplite (Smart) and one CyberPower, (all claiming to be Mac compatible))

APC do apparently still do a command-line daemon (PowerChute Network Shutdown) which monitors over the network the UPS and will cleanly shutdown the Mac. For lower-end UPS devices these are typically connected via a USB cable and the built-in Apple System Preferences let you control the options - if it is a model supported. There is however a big limitation of using a USB connection which is that you can only connect a single computer to a UPS via USB and of course most companies have multiple servers.
It maybe that what is happening even if you use APC's software is the following -
Power failure detected by UPS
Signal sent to Mac
Computer does a clean shutdown
Power restored
UPS has no way to tell Mac because it is shutdown and Mac does not support 'Wake on LAN' if fully shutdown
The Mac does have an option to 'Startup automatically after a power failure'. However this might only take place if the Mac is not cleanly shutdown, it could be that if the Mac is cleanly shutdown it does not count this as a power failure. If this is correct then there is nothing that can be done as users to resolve this, the only way it could be resolved would be if Apple provided a way for a tool like APCs software to both do a clean shutdown and set a flag as this being due to a power failure so that when the Mac does detect the power being restored it triggers the Mac in to booting.
In the dim and distant past when Macs used ADB to connect keyboards and mice the ADB interface did support an external power-on signal. This does not exist for USB.
Personally I have regarded the APC software (PowerChute Network Shutdown 3.0.1) to be so badly supported and so old as to be too risky to use. It lists 10.7 and 10.8 but not 10.9 and uses Java 1.6 which itself is unsupported. There is a third-party tool you might want to look at called NUT (Network Ups Tools) see http://www.networkupstools.org
NUT is free and lets you do clever things like -
Connect a single computer via serial or USB to the UPS
Act as a 'server' over the network to other computers sharing the UPS
When power failure is detected the NUT 'server' sends a signal to the NUT 'clients' so all of them know that there is a power failure and can do their own clean shutdowns
This gets round only being able to connect a single computer via USB.

I am having iphone 5. my phoen restarts automatically after i switch it off while not on charging. but when it is charging it works normally. battery also discharge in 1 hour.

i am having iphone 5. my phoen restarts automatically after i switch it off while not on charging. but when it is charging it works normally. battery also discharge in 1 hour.

basically i bought this phone from canada & using it in india. i tried to contact apple support in india, they told that the warranty is valid in the country where you purchsed this phone. very ammazing. Apple is a very big brand name & they are not serving their costumers in other country. any suggestions?

How clusterware restarts on automatically after server reboot in 11g R2

Hi,
I would like to know how the cluster restarts on automatically after the server reboot in 11g R2 RAC . The oracle restart feature in 11g R2 help to restart the components like databases, ASM in case of abnormal failure. But how the clusterware starts on own after the server reboot? can you share any documents or notes is really appreciated.
Thanks,
Robin.

At Grid Infrastructure installation time system configuration is modified so that UNIX init daemon restarts OHASD: http://docs.oracle.com/cd/E11882_01/rac.112/e16794/intro.htm#BABIDEFI. For example with Oracle Linux 5 and Oracle RAC 11.2.0.1 you have following line in /etc/inittab:
h1:35:respawn:/etc/init.d/init.ohasd run >/dev/null 2>&1 </dev/nulland:
[root@rac1 ~]# head /etc/init.d/init.ohasd
#!/bin/sh
# Copyright (c) 2001, 2009, Oracle and/or its affiliates. All rights reserved.
# init.ohasd - Control script for the Oracle HA services daemon
# This script is invoked by the init system
ORA_CRS_HOME=/u01/app/11.2.0/grid
export ORA_CRS_HOMEEdited by: P. Forstmann on 11 févr. 2013 18:45

My iphone5 is getting troublesome after installing that ios7 it goes blank and gets switched off automatically pls help, My iphone5 is getting troublesome after installing that ios7 it goes blank and gets switched off automatically pls help

My iPhone 5 is getting hanged after installing ios7 and gets switched off automatically when ever I type and shows vertical black bars fading to getting it switched off.some freezing screen also happen kindly help. Thanks

Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

My iphone is switched off suddenly n then it wont b started it continously shows the apple logo then again switched off automatically and when i charge it so it was switched on and after a long time then it shows battery low and then its also show 4% batt

my iphone is switched off suddenly n then it wont b started it continously shows the apple logo then again switched off automatically and when i charge it so it was switched on and after a long time then it shows battery low and then its also show 4% battery what would i do im very tensed please help ...

Hello s0ha1b
If all you get is the Apple logo and it powering off, then the next step is to put your iPhone into recovery mode and then use iTunes to restore it. If you have a back up, then you can put that on there to once the restore is complete.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Regards,
-Norm G.

E52 Switches off automatically - starts after mult...

Hi everyone,
My nokia E52 switches off automatically and restarts only after I try multiple times. There is no strict pattern in either switching off or on. It can switch off in hours or in minutes. Similarly, I keep trying pressing the power button, but it switches on whenever it wants.
I can't even understand what the problem is.
My battery is fully charged.
Could anyone please suggest, if it is an issue with the battery or the phone and what might be the solution to this.
Best Regards
-Vipul

Whilst it is working suggest that you backup essential data via Nokia Suite upon PC, then remove memory card (if any) and reset device to "Out of box" state by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by user). Lastly if no improvement see if option to re-install existing device software in Nokia Suite, as a pre-cursor to taking device to a Nokia Care facility.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Server switches on automatically after shutdown

Similar Messages

Maybe you are looking for