Server Timeout for Authentication server

Hi all
Does anybody know how to increase server timeout more than 30 sec, may be 60 sec.
Our LDAP structure very deep, 5 levels - I mean login accounts placed on the 5th level from the top.
I configureed web-authentication via LDAP, for test I created new OU and login is succesfull.
Then when real account with real OU tried to login, there always timeout error on debug window of WLC.
So I am sure it is because of deep tree of AD. It is configured long time ago and this structure already used by some applications so almost impossible to change this structure.
So only way I see to increase server timeout.
Best regards.

Hi Toleukhan,
it looks like AAA issue to me. I am moving this to security for faster response.
thanks,
Vinay

Similar Messages

Any advice as to why I'm getting Email Server Timeouts for my 2 email accounts (ports 993 & 110)?

Email Server Timeouts for my two email accounts:
For the time periods April 12-21, 2012 and April 27-present, 2012 I have been unable to access my email account at ***** through the pop server. The server returns them message "The connection to the server “*****” on port 110 timed out."
I have also had the same problem accessing my gmail account via IMAP, receiving the following message: "The connection to the server “imap.gmail.com” on port 993 timed out."
I used the Connection Doctor program connected to Apple Mail and received the following information:
Mail was able to connect to the internet.
Gmail: Could not connect to this Gmail IMAP server. Check your network connection and that you entered the correct information in the Account preferences. Also verify that the server supports SSL. If it does not, deselect the "Use SSL" checkbox in the Advanced tab of Account preferences.
BayanMail: Could not connect to this POP server. Check your network connection and that you entered the correct information in the Account preferences.
SMTP smtp.gmail.com:*****@gmail.com Connection and login to server succeeded.
*****Mail SMTP server: Connection to server succeeded; login not required.
Can you help me with this problem?
I am running OS 10.6.8
Mail 4.5

The Motorola Droid Razr has a camera that sets up the shot to take a quality picture so its not in an instant. My wife also doesn't like that feature but I believe in the settings you can disable some of those functions. You have to read the owners manual for optimal settings.
Now email sent from the native app that came with the phone is totally useless. If you have a email service like Gmail or Yahoo Mail or Outlook Email go to the google play store and use the stand alone app. I can tell you that when we email photos the best email app is GMail or Microsoft Outlook Mail.
I take a picture and then select Gmail and it attaches and sends with great speed and Outlook works this way also since the attachment size is greater than other email programs. Your local isp or even exchange server will not send such large attachments
And I agree those apps preloaded should be able to be removed. If I buy my phone I should say what I want on it. But alas unless you do some other methods you can find on the web those dumb apps will remain.
Good Luck

Server settings for remote Server in Flash Builder 4.5 Premium

Has anyone figured this out? Seems like everyone is talking about FlashBuilder that comes with PHP and that doesn't help me. So I'm still having trouble moving my mobile app to a remote server and I have FlashBuilder 4.5 Premium without PHP.
I have created a PHP project outside of Flash Builder and then I have connected to it using the Data/Service tab, but then it ask for the server information and that is where I'm having the issues.
It works create with the setting like this.
MAC:
Server Options
Web Root: /Applications/MAMP/htdocs
Root URL: http://localhost/
But when you try to export a release build or just like to test it, and insert your server settings.
Server Options
Web Root: /home/username/domain_name/
Root URL: http://mydomain.com
It doesn't Validate which in turn won't let the project work. Also it would be nice to put the remote server in there for testing instead of just for release builds. Any one have an answer. Every tutorial or explanation shows localhost.
thanks

Hello guys,
I have found a solution: In ZendFramework/library/Zend/Amf/Response/Http.php linenumber 59:
$ssl = $_SERVER['HTTPS']; is given an error.
I did this:
$_SERVER['HTTPS'] = 'off';
$ssl = $_SERVER['HTTPS'];
So add this line....
And it works...
Hope it works for you too.
Ooh, and don't forget to follow the instruction of TweenOut.
Erik.
Van: tweenOut [email protected]
Verzonden: dinsdag 20 december 2011 18:42
Aan: EGJ Steens
Onderwerp: Server settings for remote Server in Flash Builder 4.5 Premium
Re: Server settings for remote Server in Flash Builder 4.5 Premium
created by tweenOut <http://forums.adobe.com/people/tweenOut> in Using Flash Builder - View the full discussion <http://forums.adobe.com/message/4095833#4095833

Buying SQL Server 2012 for a server

I'd like to buy SQL Server 2012 for a server running an Xeon E-1230 v3 (if it matters). Will these be adequate:
Microsoft SQL Server Standard Edition Single Software Assurance OPEN BUSINESS: 228-04560
5 CALs: 359-01028

Hello,
This is a community forum for technical questions & issues.
For question regarding pricing / licensing please contact a Microsoft sales partner or licensing expert.
Call (1-800-426-9400), Monday through Friday, 6:00 AM to 6:00 PM PST to speak directly to Microsoft licensing specialist.
http://www.microsoft.com/sqlserver/en/us/get-sql-server/how-to-buy.aspx
http://www.microsoft.com/sqlserver/en/us/get-sql-server/licensing.aspx
http://www.microsoft.com/licensing/about-licensing/sql2012.aspx
For selecting the right Edition of SQL Server depending on your requirements, please visit
Features Supported by the Editions of SQL Server 2012
Olaf Helper
[ Blog] [ Xing] [ MVP]

Pls Suggest server names for Reporting Server and Shared Services

Hi,
Can any one Pls Suggest server names for Reporting Server and Shared Services
Thanks in advance.

Report server name: OrclRpt
Shared Services: OrclSS

Using Lion Server Radius for authenticating "other" clients

Hi I've been trying to get the Radius service in Lion Server to authenticate users of my SQUID web proxy. I have followed the squid wiki's instructions to configure the squid server as a radius client and pass authentication requests to the Lion Server Radius (I hope). However I'm trying to configure and test the Lion Server Radius. As Lions Server Admin GUI for radius only lets to add Airport Basestations, I've been trying to dig around for what underlying config files to edit. I have tried 2 methods of adding the client details to radius:
1. By editing the /etc/raddb/client.conf, and adding/changing (for example):
client localhost {
     secret     = mysecretpassphrase
client 192.168.0.0/24 {
     secret              = mysecretpassphrase
     shortname       = local-lan-clients
and restarting squid. Nothing seems to get mentioned in the radius log file! So I'm not completely convinced that the Lion Radius took any notice of this!
2. Instead of above, added the same client info using radiusconfig:
$ sudo radiusconfig -addclient 192.168.0.0/24 local-lan-clients other <return>
- then it prompts for the secret. With this command I notice the entry/event is recognised in the radius log file, and also looks like some SQL activity. If I dont specify "other" for the nas-type, it defaults to "Aiport Base Station" or similar.
OK, so forgetting about SQUID for a minute, I can't even get that far as I'm just trying to test the config using the "radclient" utility from the Lion Server and the squid server:
$ sudo radclient localhost auth mysecretpassphrase <return>
and... no response, just hangs, nothing in radius log either.
The Lion Firewall allows TCP and UDP requests into the Radius authentication port.
Any ideas what else I need to do? Scratching my head, I'm wondering if it is anything to do with SSL? e.g. do I need to make the authentication using the self-signed certificate that Open Directory has? I presume any Airport Base Stations added to radius will use this certificate to establish a secure connection for authentication.

The RADIUS server in OS X Server is a standard FreeRADIUS implementation with Apple's own custom GUI frontend for configuring it and which only allows adding AirPort base-stations. In Mountain Lion Server it is even limited to a specific configuration for the AirPort base-station.
However if you follow the normal command-line instructions and steps for configuring FreeRADIUS then it will be possible to add any type of RADIUS client.
While as far as I can see by manually configuring the FreeRADIUS server in OS X Server should enable you to do what you want, most people chose to configure Squid to use either a PAM or the LDAP modules for Squid to in this case authenticate directly to Open Directory (which is of course based on LDAP).
I myself have used a PAM in the past with Squid to successfully configure Squid to authenticate users via Open Directory. I was even able to specific an Open Directory group and only allow members of that group access via the Squid Proxy Server. I then went a bit OTT and set up another open-source tool (which was discontinued and I had to fix to get working) to process the Squid logs and store them in MySQL, and then setup FileMaker Pro to connect to the MySQL database via ODBC to allow producing reports.
Unfortunately the AFP458 website had a major redesign a while ago and many previous technical articles on it are now hard to find. I had used two articles on that site to guide me through setting up Squid and the PAM on a Mac server. I believe the two articles I used are the ones listed below.
http://afp548.com/2004/09/08/using-os-x-open-directory-to-authenticate-squid-pro xy-server/
http://afp548.com/2004/12/13/squid-server-using-ldap-authentication/

Seperate instances of server class for authentication

I'd like to implement some form of authentication in my server class. I thought about adding a few login routines and while the client hasn't authenticated itself all calls to functions other than the login stuff will throw Exceptions.
However, as I understand from the (in my opinion chaotic documentation and tutorial) every UnicastRemoteObject class is instanced only once and after that every client will use a threaded version of that same class instance... This would mean that if one client logs in, all clients log in as the object doesn't distinguise between clients.
So I either need a way to instance the server class for every client or (perhaps even more graceful) use a Login class that spawns a server class as soon as the login has been accepted.
Unfortunately I can't find anything on the web or the forums about this (lotsa problems like mine but either unanswered or different enough to be less than helpful).

I'd like to implement some form of authentication in
my server class. I thought about adding a few login
routines and while the client hasn't authenticated
itself all calls to functions other than the login
stuff will throw Exceptions.
However, as I understand from the (in my opinion
chaotic documentation and tutorial) every
UnicastRemoteObject class is instanced only once and
after that every client will use a threaded version
of that same class instance.No, you can have as many instances as you like but you have to start with a single object which is bound into the Registry. What you are after is a Session pattern like this:
public interface Login extends Remote
Session login(String credentials) throws RemoteException;
public interface Session extends Remote
/// ... whatever you want
then a singleton instance of LoginImpl is bound to the registry, the client retrieves it, tries to get a Session by logging in. The implementation of login() just looks like this:
public Session login(String credentials) throws RemoteException
// check credentials, RemoteServer.getClientHost() &c:
if not acceptable throw new AccessException();
// otherwise
return new SessionImpl(credientials);
}Easy as pie.

Set Command Timeout For SQL Server

Hello,
How do you set the command timeout for the 'open' statement? I am running a Database via SQL Server and I tried the dialog box timeout statement (the check box on the advanced tab) and simply get an error. The manual shows a 'step.commandtimeout' but how is it implemented?
Thanks,
Kevin

Kevin -
I looked at the internal implementation of the CVI SQL Toolkit. The toolkit function that the step type uses is DBNewSQLStatement. Internally to the toolkit the function opens a recordset instead of a command object. The command timeout attribute is only available on a command object and not on a recordset object, so as implemented inside the toolkit the error is appropriate. I think the toolkit could have used a command object to create the recordset object and this would allow the toolkit to let you set the timeout attribute. Unfortuneately this is not the way it was done.
For the future I may investigate to see if there is a way to bypass this limitation by using different toolkit functions, but I am not sure if there a
re any side effects.
Scott Richardson (NI)
Scott Richardson
National Instruments

What is timeout for messaging server waiting on the 220 banner

May I know what the timeout is for messaging server waiting on the 220 banner during the first attempt? Thanks.

YY_MM wrote:
May I know what the timeout is for messaging server waiting on the 220 banner during the first attempt? Thanks.As you didn't provide the version of Messaging Server you are using, I can only point you to the values for the latest version (6.3):
http://docs.sun.com/app/docs/doc/819-4429/acmkh?a=view
STATUS_MAIL_RECEIVE_TIME (Integer) : Specifies, in minutes, how long to wait to receive the SMTP response to a sent MAIL FROM command. (Also corresponds to the time we wait for the initial banner line, and the time to wait to receive a response to a HELO, EHLO, or RSET command.) The default is 10.
Regards,
Shane.

Server thread for Chat server error

hey i am trying to make a server for a simple chat service..i have written the code for the server but in my ChatServer thread in the run() function it is giving a null pointer exception...please help me out in this as unless the server is not running i can procede on checking my client code.
i am attaching the code for my ChatServer.java
import java.net.ServerSocket;
import java.net.Socket;
import java.io.DataOutputStream;
import java.io.InputStream;
import java.util.ArrayList;
import java.io.IOException;
import java.lang.Thread;
@SuppressWarnings("unused")
public class ChatServer extends Thread
     Thread thread;
     Socket socket;
     ServerSocket serversocket;
     ArrayList<ClientObj> userarraylist;
     @SuppressWarnings("unchecked")
     ArrayList messagearrayList;
     ClientObj clientobject;
     public ChatServer()
     @SuppressWarnings("unchecked")
     public void StartServer()
     try{
     serversocket = new ServerSocket(4567);
     }catch(IOException e) { }
      userarraylist = new ArrayList();
      messagearrayList = new ArrayList();
     thread = new Thread(this);
     thread.start();
     public void run()
          while(true)
               try{
               socket = serversocket.accept();     //I AM GETTING AN EXCEPTION HERE
               System.out.println("Waiting for connection");
               }catch(IOException e) { }
               ChatFunctionality chatFunc = new ChatFunctionality(this,socket);
     public ClientObj GetClientObject(String UserName)
          ClientObj returnClientObject = null;
          ClientObj TempClientObject;
          int m_userListSize = userarraylist.size();
          for(int j = 0; j < m_userListSize; j++)
               TempClientObject = (ClientObj) userarraylist.get(j);
               if(TempClientObject.getUserName().equalsIgnoreCase(UserName))
                    returnClientObject = TempClientObject;
                    break;
          return returnClientObject;
     public boolean IsUserExists(String UserName)
          if(GetClientObject(UserName) != null)
               return true;
          else
               return false;
     public void SendMessageToClient(Socket clientsocket,String message)
          String sSentence = message;
          try{
          DataOutputStream outToClient = new DataOutputStream(clientsocket.getOutputStream());
          outToClient.writeBytes(sSentence + '\n');
          }catch(IOException e) { }
     public void AddUser(Socket clientSocket,String UserName)
          if(IsUserExists(UserName))
               SendMessageToClient(clientSocket,"EXISTS");
               return;
          clientobject = new ClientObj(clientSocket,UserName);
          userarraylist.add(clientobject);
     public void SendListOfUsers(Socket clientSocket)
          int listCount = userarraylist.size();
          for(int i=0;i<listCount;i++)
               String name = userarraylist.get(i).ClientUserName;
               SendMessageToClient(clientSocket,name );
     public void SendMessageToAll(String Message)
          int UserCount = userarraylist.size();
          for(int k=0;k<UserCount;k++)
               ClientObj TempClient = userarraylist.get(k);
               SendMessageToClient(TempClient.Clientsocket,Message);
     public static void main(String[] args)
          ChatServer chatserver = new ChatServer();
          chatserver.StartServer();
          return;
}

So lets have a look at your error.
java.net. --------------->BindException<-------------------: Address already in use: JVM_Bind
     at java.net.PlainSocketImpl.socketBind(Native Method)
     at java.net.PlainSocketImpl.bind(Unknown Source)
     at java.net.ServerSocket.bind(Unknown Source)
     at java.net.ServerSocket.<init>(Unknown Source)
     at java.net.ServerSocket.<init>(Unknown Source)
     at ChatServer.StartServer(ChatServer.java:36)
     at ChatServer.main(ChatServer.java:132)It clearly states that you have an [BindException. |http://java.sun.com/j2se/1.4.2/docs/api/java/net/BindException.html] So now we go to the java api and look up BindException to find out what it is. And after a have found out what it is, we fix the problem.
Tell me how you solve the problem after reading what it is.(A hint, try: 4444)
EDIT: After checking with NETSTAT command in windows cmd, I dont find port 4567 being used.. So it might not be the reason. But it sertainly is worth a try.
Edited by: prigas on Jul 6, 2008 1:15 AM

Migrating From Window Server 2003 to Window Server 2012 for Web server deployment and Developmemt Machine is on Window Server 2008

Hi Microsoft Team,
We need your urgent advice and that is also on priority:
Issue Description: We need to migrate from
WINDOW SERVER 2003 to WINDOW SERVER 2012 while the development activity will be carried
under WINDOW SERVER 2008 as DEVELOPMENT BOX.
.NET Framework Version: 3.5 ( For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
IIS Version: 7.5 (For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
Need your quick advice Is that configuration feasible for Development and
Deployment (Web Server).
Highly appreciate your response as this will depend which product we need to buy also if you feel any showstopper or concern. Please let us know.

Hi,
As suggested by Tim, in order to get better assistance, we can ask for help in the following IIS forum.
IIS Forum
http://forums.iis.net/
In addition, regarding migrating from Windows Server 2003 to Windows Server 2012, the following blog can be referred to for more information.
Step-By-Step: Active Directory Migration from Windows Server 2003 to Windows Server 2012
http://blogs.technet.com/b/canitpro/archive/2013/05/27/step-by-step-active-directory-migration-from-windows-server-2003-to-windows-server-2012.aspx
Best regards,
Frank Shen

MS Forefront Server Security for Exchange Server 2007 SP1 - License Expired - Unable to update

Hi
1. My Windows SBS 2008 Server Console shows:
Virus Protection for e-mail STATUS alert CRITICAL (Forefront Security for Exchange Server)
Details: None of the engines enabled for updates have been updated in the last week.
Forefront Security for Exchange Server SP 1
2. Event Viewer
Error GetEngineFiles
Event ID 6012
Generation: Microsoft Forefront Server Security encountered an error while performing a scan engine update.
Scan Engine: vBuster (same for microsoft, Kespersky5, Wormlist, etc.)
Error Code: 0x80004005
Description: The product license has expired.
Error Microsoft Forefront Security
Event ID 7007
General: None of the engines enabled for updates have been updated in the last week.
3. About forefront
Opened Forefront Server Security Administrator > Help > About Forefront
Forefront Server:
Version: 10.1.0746
Service Pack: 1
Product Id:
Licensed Components:
Component: Forefront, License Type: Evaluation, Expiration Date: 16 Dec 2013
DO I HAVE TO BUY THIS PRODUCT or DO I HAVE TO INSTALL Forefront Security for Exchange Server SP2 or SP3?
Can please someone advise in this regard,
Thanks

-->Component: Forefront, License Type: Evaluation, Expiration Date: 16 Dec 2013
Evaluation version? didn't activate this product? You
can convert an evaluation license to a subscription license by activating the product. Be sure to have the product key available when activating FPE. After the product is activated, you can also align when the product expires with your license agreement, and
easily renew your license by entering a new expiration date.
Best,
Howtodo

Server Sizing for SQL Server 2005

Hi Experts,
We are having a SQL Server 2005 Enterprise Edition, we are planning to do a sizing of the server.
Do we have any standard tool or criteria which can be used to come up with an assessment of the hardware enhancement which can be proposed for the server which host SQL server 2005.
Also is there any standard recommendation when setting up a production environment which would host SQL Server
Joji

http://sqlblog.com/blogs/jonathan_kehayias/archive/2010/03/22/sql-server-installation-checklist.aspx
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Mail does not retain correct external server path for Exchange Server '07 even when "automatically detect and maintain account settings" is unchecked. Advice?

Mail keeps resetting the external server path for an Exchange server '07 account when the program is closed and reopened. This happens even though "automatically detect and maintain account settings" is unchecked. To reset to the correct setting I need to disable the account, make the change and save with the account disabled, close Mail, reopen Mail, and enable the account. Then the settings are maintained and Mail works great... until Mail is closed and reopened again. At that point the server path reverts to an incorrect setting. Anyone else experiencing this? Advice? I don't think this is a problem with the Exchange server because this problem did not happen with OS X Mavericks.

This this to fix repeated password requests....
Open Keychain Access in Applications/Utilities
Search for your Dreamhost accounts. There should be two entries (incoming, outgoing) for each account.
It's not uncommon to find old entries. You might want to delete all and start clean.The Keychain isn't smart and will keep all old entries when you add/change a password.
While you are in the Keychain run Keychain First Aid, Under Keychain Access in the Menu bar.
Open Mail
Open Connection Doctor.
If you see red for the account, enter the password again.
If you continue to have problems, delete the account then add it back.

Microsoft Project Server Support for SQL Server 2014

Does anyone know the timeline for Microsoft Project Server to support deployment on SQL Server 2014? Also, has anyone tried this yet as an unsupported deployment, and if so, have they found any issues?

"SQL Server 2014 is not yet supported for Project Server 2013", as per the article Hardware
and software requirements for Project Server 2013: https://technet.microsoft.com/en-us/library/ee683978(v=office.15).aspx updated as on Dec
09, 2014.
Cheers! Happy troubleshooting !!! Dinesh S. Rai - MSFT Enterprise Project Management Please click Mark As Answer; if a post solves your problem or Vote As Helpful if a post has been useful to you. This can be beneficial to other community members reading
the thread.

Server Timeout for Authentication server

Similar Messages

Maybe you are looking for