"Server times out" on iphone

Just switched publishing from old iWeb to new (iLife 09). Web sites are viewed fine on iMac and laptop (Safari and Firefox); but no longer load on the safari browser on the iPhone. Message tells me the server times out; and can't load the page.
Any thoughts?

Have any of you had any further problems with the server time out problem on your iphone, which you mentioned on 22 December. Since around the same time, my iphone 3GS has been timing out on applications and safari. However, if I turn off the iphone and restart it, it works for the first few attempts then it times out again.
Any help would be appreciated.

Similar Messages

Edge Animate causing Server Time Out Error and other problems

Site is not verifying due to Server Time Out error. Also menu which was created with Adobe Edge Animate does not show up as navigation in a site map or when bots read the site. Site won't verify or index in google.
Suggestions on how to fix this would be helpful and appreciated.
This is the website address. please type in Without any spaces:
louis place cafe DOT com DOT au

Site is not verifying due to Server Time Out error. Also menu which was created with Adobe Edge Animate does not show up as navigation in a site map or when bots read the site. Site won't verify or index in google.
Suggestions on how to fix this would be helpful and appreciated.
This is the website address. please type in Without any spaces:
louis place cafe DOT com DOT au

Connection to server times out

Hi, I know I've seen somewhere that you can set how long before your connection to your remote server times out in DW. After a few minutes of editing files, and then when I go to upload them to my host, It takes forever just to make a connection. I used CS3 for a while, then upgraded to CS5. CS3 didnt seem to have this issue.
Another issue I seem to have is when I DO put files to my remote, sometimes the files dont seem to reflect changes I made. For instance, I added an id attribute to a firm field, uploaded my file to the remote, hard refreshed my browser viewing the same page and viewed source. The form field id was not there! So I clicked the expand local and remote files button and pulled the file over to the remote manually!
Maybe these are issues with my hosting company? Anything I can do to ensure my remote connection stays connected, at least for an extended period of time if not indefinately. Thanks in advance!

Hi Nancy, thats for the tips and info. I've tried most of what you suggested. One thing I never thought about though was toggling passive mode on and off. For some reason I just always assumed this should be on by default. So I will try that and see how it goes over the next day or so.
Also the FTP optimize performance was checked. Seems like I had an issue with this a while back, so I unchecked it as well.
Now the other issue of why updated files arent showing up on my remote. Yes I always use ctrl+F5 to refresh my browser. Again, this morning when I did that very thing, and then viewed source, the updated code was not there. The code I am referring to was about 20 lines of javascript that was showing in dw code view, but not in ff source view. So not sure about that one. As you said its possibly my host provider. Thanks again!

Email stuck in Outbox - Server times out

I sent an email with an attached pdf - should have checked the size of the pdf first. After about 5 to 10 minutes I get a Server Time out error. I closed and opened the email program and it tries to send the email again.... How can I delete the email with out opening the program?
Thanks in advance. Dale
G3 Mac OS X (10.3.9)

Dale,
Welcome to the Discussions.
Quit Mail, if running. In the Finder, open Home/Library/Mail/Mailboxes and locate the Outbox.mbox file, and delete it. Mail will create a new one, when next you go to send.
Are there any messages in the Outbox you wish to save? If so, don't delete, but only drag out to be on the Desktop, and post back.
Ernie

BPC Optimization Server Time Out error message

We’re using BPC 7.5 MS and on patch level 111.02
There’s two front-end servers and one back-end.
When completing a full optimization with compression on an application we immediately get the optimization popup screen with no processing information only a “Server Time Out” error message.
Optimization was taking a long to time run and sometimes timed out. To try and resolve this issue we have just updated indexes and statistics and during our test in production we now receive the “Server Time Out” error message immediately. However, the records from tbl.Factwb and tbl.Fac2 did move to the tbl.Fact.
Our development environment test ran fine.
Any suggestions?
Thanks.

Hi Michael,
please look in the logs maybe you will found more informations regarding the timeout and eventually share it.
There are several notes about a timeout in 10 version,
1394533 - 'Server Time Out' error when performing Modify Application, Full Process of a dimension, or Full Optimize this is related with NLB
but it could be also related with the web.config 1628908 - How to fix Optimize with compress time-out failure
or if you reach the max number of connection
1635749 - Error Message: Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool
Regards
Roberto

Why does my Fieldpoint OPC server time out?

I'm using Fieldpoint Explorer 3.01 with 1600 ethernet modules. I'm using Wellspring Solutions' Object Automation as an OPC client to read and write to I/O. Everything works fine on one computer running Win NT 4.0. Another computer, however, is running NT Server 4.0, and the OPC reads/writes from Object Automation work for exactly 1759 seconds (or approx. 121 minutes), and then the Fieldpoint Server "times out", and the only way to get it to work again is by shutting down and restarting Object Automation, assumedly this somehow reinitializes communication with the server. This is a repeatable error that occurs at exactly the same time, every time. This only happens with the National Instruments Fieldpoint OPC server (I'm
using several) on one of the machines. I tried reinstalling the Fieldpoint OPC Server several times to no avail. I've used other OPC clients (from OPTO22, or Rockwell, Matrikon, Kepware) and can't communicate until Object Automation is shutdown and restarted. Any help or ideas on how to further troubleshoot would be appreciated, thanks.

Aaron, attached are 3 log files generated in a test that I ran. The test used Object Automation to turn on and off a relay channel (OPC item: Common FP Res\FP-RLY-420 @4\Channel 1) every 10 seconds. I used the Matrikon OPC delegator with the OPTO22 Test Client (written by Rockwell) to monitor the channel at the same time (the delegator would NOT work with Object Automation directly). The OPCDelegatorOPTO22TestClient.txt file is the log file for this client. Basically, the test started around 13:07 and lasted the usual 121 minutes. Then the OPC writes stopped around 15:08, at which time I tried to manually read and write to the channel using the OPTO22 client, generating the errors towards the end of the logfile. Incidentally, I don't k
now what the errors at the beginning of the file are, but there are no noticable problems until after 121 minutes. I then tried to use the Kepware OPC test client with delegator to read and write to the channel but this also did not work, and the logfile OPCDelegatorKepwareTestClient.txt is for that test. The other logfile (OAlogfile.txt) is the logfile generated by OA, see the end of file for the error. They should all be text files, not sure why one of them is listed as binary below. Let me know if this helps or if there is anything else I can provide.
Attachments:
OAlogfile.txt ‏526 KB
OPCDelegatorKepwareTestClient.txt ‏50 KB
OPCDelegatorOPTO22TestClient.log ‏517 KB

Server time out by full Optimize application process

Hello,
we have problem with full optimize application processing. We have got error message "Server time out" on the Processing OLAP Database.
our test environment on the VM x64bit, Server 2008
Please anybody helps me to solve this issue.
P.S. other optimize processes are workable (lite and Incremental)
Thanks
Arai

Hi,
Please see Note 1277009.
This might resolve your issue.
Karthik AJ

SMS 2008 Server time out same time every hour

Our server times out at the same time every hour. Any computer connected to our network at exactly xx:53, any program or anything you are attempted to do goes to the loading circle and says not responding. It stays that way until xx:54. Every hour, every
day. However, nothing shows up on the error reports.

Hi MNQWolfe,
Based on your description, I suggest that you should firstly check if there any program or feature (such as antivirus program, update, backup and so on) started
working at that time. Also, please monitor the Task Manager or Resource Monitor to check if any process was started at that time.
In addition, it seems to be a network issue. Please run a sniffer on the server. You can use Microsoft Network Monitor 3.4 to monitor and then check ARP messages
and so on.
Microsoft Network Monitor 3.4
http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=4865
Hope this helps.
Best regards,
Justin Gu

TS1368 I can't connect to the iTunes store with my Apple TV. I can see what movies are on offer but when trying to access my account i am advised "Can't connect to server" (times out).

I can't connect to the iTunes store with my Apple TV. I can see what movies are on offer but when trying to access my account i am advised "Can't connect to server" (times out).

I have the same problem with my 3rd gen Apple TV. I can preview iTunes movies, stream from my Mac, Airplay from my other devices but I cannot rent a movie on iTunes. Every time I try I get "Can't connect to ITunes" and "Unable to sign in". Had technical support review the problem over the phone and they agreed to send me a new one. Same problem. Interestingly enough my 2nd gen Apple TV works just fine.

Server time-out issue - unable to start "hello - world" application

Hi Team,
I am doing the exercise of week 1 of "Intro to SAP HANA Cloud platform (Repeat) " -
I am unable to start the application - I get the server time out error - also I tried increasing the timeout in server editor to 600 - I still
get the error as shown below
Please help me in resolving this.
Thanks in advance!
-Manju

1. I meant look for any errors in the logs, for something related to your app.
2. Just go to Java Applications in Cockpit. BTW, do you know the help center SAP HANA Cloud Documentation? That should be your first stop for any questions around HCP along with the SAP HANA Cloud Platform Developer Center and http://hcp.sap.com/.
3. There should be more details in that log file about the reason the app could not start.
HTH!
--Vlado

My email on hotmail does not load. Server times out

When i attempt to log on to my hotmail account once i have logged in the emails do not load and the server times out. this has happened on other websites also. This a brand new computer.

Hi Ryan, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
Or whatever Interface you use.
http://support.apple.com/kb/HT2712

Outgoing server times out - can't send any emails and don't know what to do

I receive emails just fine in my MobileMe account but when I try to send them they get stuck in outbox ****. It is an IMAP account and I have tried the connection doctor - which shows the server times out - as does the message box that pops up. I have a Genius Bar appointment for tomorrow but this is driving me crazy. Any insight would be much appreciated!

I had this occur several times before, some time ago & wish I wrote down the fix. I too am experiencing the same issue for the last 2 days; so my guess is it must not be my computer since nothing has been changed except I did a "sync" & that is the only thing different in the last few days.

HT4634 Why does my connection to email server time out on default port?

Why does my connection to email server time out on default port?

Hi there,
There may be a conflict between the network settings and your devices. I would recommend taking a look at the article below and comparing that to your routers current settings.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
-Griff W.

Cannot seem to download latest update for my Iphone. The server times out about 333 mb of 686 mb. Its done this 6 times now. Anybody know why?

Is anyone having problems downloading the latest update for Iphone 3Gs. I have only been able to download about 333mb of the 686 mb file. I get an error .3259 server timed out. Have checked with my internet provider and they say there is no disruption on their end. My modem has not disconnected in the past thirteen weeks. Apple says its not at the store end either. Any help would be appreciated.

Becasue this is very common and is the most common resolution for your issue.
This is asked and answered many times every day.

How to deal with deadlock on wwv_flow_data table when http server times out

There are some threads about a deadlock on the wwv_flow_data table. None of them contain a real explanation for this behaviour. In my case I will try to explain what I think is happening. Maybe it helps somebody who is hitting the same matter.
In my case with APEX 3.2.1 I am navigating from one page to another. Doing this APEX will lock the table wwv_flow_data. As soon as the other page is shown the lock will be released. But now this other page contains a bad performing query (standaard report region). After 5 minutes the http server (modplsql) will time out and present the message "No response from the application server" on the screen. In the meanwhile the query is still running on the database server and the lock stays on the wwv_flow_data table.
Normal user behaviour will be that the user will use the back button to return to the previous page and tries it again to navigate to the other page or
the user will try to refresh the page with the bad performing query.
And voila now you will have a deadlock on the wwv_flow_data table since a second session is trying to do the same thing while the first hasn't finished yet.
How to deal with it?
First of all. Have a good look at the bad performing query. Maybe you can improve it that it will succeed before the http server will timeout.
In my case the 11gr1 optimizer couldn't handle a subquery factoring clause in the best way. After changing it back to a classical inline query the problem was solved.
Secondly you could increase the timeout parameter of the http server. Although this not the best way.
Maybe it would better if APEX in a next version would release the lock on the table wwv_flow_date earlier or do a rollback just before the moment that the http server is timing out.
regards,
Mathieu Meeuwissen

Hello Shmoove,
I saw your reply here and you probably understand the problems the HTTP 100 response may cause.
I am trying to send image that was taken by getSnapshot. The problem is that the server respond with this HTTP 100 message.
I suspect that the reason that my server doesn't recognize the file that I'm sending from J2me is that the "server to client" response to the 100 message comes after the second message of (see what the TCPIP viewer shows down here):
POST /up01/up02.aspx HTTP/1.1
Content-Type: multipart/form-data; boundary=xxxxyyyyzzz
Connection: Keep-Alive
Content-length: 6294
User-Agent: UNTRUSTED/1.0
Host: szekely.dnsalias.com:80
Transfer-Encoding: chunked
400: Client to Server (126 bytes)
78
--xxxxyyyyzzz
Content-Disposition: form-data; name="pic"; filename="david.jpg"
Content-Type: application/octet-stream
400: Connected to Server
400: Server to Client (112 bytes)
HTTP/1.1 100 Continue
Server: Microsoft-IIS/5.1
Date: Wed, 23 Mar 2005 00:47:02 GMT
X-Powered-By: ASP.NET
Any help will be appreciated,
David

"Server times out" on iphone

Similar Messages

Maybe you are looking for