Server-to-Server connections Failing

Hi All,
Having problems with Server-to-Server connections through a CSS11501. Servers are on the inside, and connect through vip address. would this a valid configuration ?
would appreciate any suggestion.
Thx in advance.

you have to make sure the response from the server goes back to the CSS in order to nat the server ip back to the vip ip otherwise the client[server] will reject the answer.
If the 2 servers are in the same subnet, the response will go directly to the client-server.
The solution is to configure client nat for server to server traffic.
Regards,
Gilles.
Thanks for rating this answer.

Similar Messages

  • How do I set the "When an OCSP server connection fails, treat the certificate as invalid" in Firefox for Android?

    Due to the security concerns from Heartbleed and Steve Gibson's excellent coverage on certification revocation, I have set "When an OCSP server connection fails, treat the certificate as invalid" on my desktop Firefox and now want to do the same on Firefox for Android. I cannot find anything in the settings menu to allow this. Is it done through about:config and if so, what is the setting name there?

    hello mcvickerp, in about:config you can switch the setting "security.OCSP.require" to true.

  • "server connect failed" error - CIT 400

    Would appreciate some help with this one:
    My CIT 400 handset does not seem to be able to connect to the base station. I get the error "server connect failed" when I try to sign in to Skype. No blue light flashing on the base station(during sign in or otherwise) either. Have tried resetting the base, resetting the handset, but no luck ...although the blue light on the base does flash once when it is reset. Any pointers please?

    Hi! do you have a PSTN line or landline plug-in to the device?  Can you receive landline calls from CIT400?  You may also try to access the setup page for the device and check the skype configuration.  Just enter the IP address of the device on your browser and use admin for the username an password.  Check on the Skype page the status of your account.  You may try different Skype account to check if it will work.

  • Not able to download XML DK - server connection fail

    Hello,
    I am trying to download xdk_nt_10_1_0_2_0_production.zip from
    http://www.oracle.com/technology/tech/xml/xdk/software/production10g/utilsoft.html#nt
    I tried from different computers and with different profiles, all with the same result:
    it starts downloading and then it breaks saying something like *"server connection failed"*
    Any idea?
    Can I get that file from s/w else? Can you post it here?
    Thanks,
    Terrn
    BTW I tried with a d/l manager and that's also not working, it d/l until 25% and then it stops.

    http://www.oracle.com/technology/tech/xml/xdk/software/production10g/index.html

  • I downloaded IOS6 a week ago, now, all of a sudden the when I try to send emails the server connection fails. I have tried deleting and recreating the email account, but no good. Any suggestions?

    I downloaded IOS 6 a week ago and just last night the server connection fails when I try to send an email. I tried deleting and recreating the email account several times, but it still doen't work. Any ideas?

    Are you using yahoo? If so, wait it out. Yahoo has had a lot of issues lately and you just have to wait for them to fix it.

  • TS1843 server connection failed--please how do I resolve this, had i-pad 2 days

    Help please, I have had the i-pad for just two days, but when I press the mail button all I get is 'server connection failed'
    I can access my e-mail by going diretc to the website but this seems to be the wrong way to do things

    google your mail providers settings and go over them 1 by 1 to make sure it's set correctly in your ipads mail account settings

  • ESB server connection failed

    Hi,
    I am new to Oracle BPEL. I am facing some issues while creating a integration server in Jdeveloper. It says " ESB server : Connection failed". Also I am having issues installing Oracle BPEL in middle tier. Can someone please help me out with the installation sequence for the same and provide some clarity on the patch application
    Edited by: user8736585 on Nov 30, 2009 7:34 PM

    You are talking about jDeveloper 10g, right?
    If yes, you need to have the configuration of the application server before the Integration Server Configuration. the App server must be up and running.

  • Trying to setup email account - getting "server connection failed"

    I'm hoping someone out there can help me setup a POP account on my iphone. My host where the email account is based says it supports POP and/or IMAP, but I've tried to create a new account on the iphone with both methods and get the same message each time. The error says:
    Server Connection Failed
    The certificate for [email protected] may be invalid.
    I just setup the same email account in my microsoft outlook and it works fine. Any thoughts???

    Same problem here. We are running Exchange 2007 at my school and all I want is to get my mail sent to my iphone. I have no need to sync my iphone to my school computer.

  • HT5624 My server connection failed what should I do

    My server connection failed what should I do

    Hi mgwilliamstown,
    Thanks for using Apple Support Communities.  This article has some information on troubleshooting car stereo connections, including Bluetooth:
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/TS3581
    Cheers,
    - Ari

  • BPEL server connection failed in Integration Server connect

    I am creating an 'Integration server' in the JDeveloper.
    After furnishing the details (App server name, Host, Port) on testing the connection it gets failed for BPEL process manager server:
    Application Server: OK
    BPEL Process Manager Server: FAILED
    ESB Server: OK
    The BPEL identity service failed to start because of the error: java.io.FileNotFoundException:http://hostname:8888/integration/services/testconnection/BPELConnection
    Any ideas?
    thanks in advance.
    Bin

    Hi Françoise,
    I think Application Server Test uses OPMN Port and for testing BPEL and ESB HTTP port is used.
    Do you use default 8888 HTTP Port Number? When you create a Integration Server Connection it is default value, but maybe you have installed Oracle Application Server on another http port.
    Regards,
    J

  • Server "Connection Failed" message on Classic startup

    I recently updated from OS 10.2.8 to 10.4.3. Everything made the conversion smoothly except that whenenver I now startup Classic, I get this message in a dialog box:
    Connection Failed: The server may not exist or it is not operational at this time. Check the server name or IP address and try again.
    I click the "OK" button, and then it repeats the process exactly 3 more times and Classic starts and runs fine. This is consistent and never varies.
    I'm running on a LAN (with a bunch of Windows machines), which I need to affirmatively log on to (shared printers excepted). It seems like Classic is trying to automatically log on to some network, something it hadn't done under 10.2.8. I checked the system preferences for both Classic and Networking but can't find anything which seems relevant. I'll note that under Classic System Prefs. it states (under "Start/Stop") that it's using the system folder on my computer and not looking elsewhere.
    How can I stop the nuisance?
    Thanks

    dbahr,
    Check the Servers folder in the OS9 System Folder for any shortcuts (or anything) relating to disks on other Macs that may have been selected to mount at start-up.
    If it's not this, I think it may be some older software performing a version check over the internet at start-up using an extension. Except the host it's trying to connect to is no longer valid, or OSX 10.4's firewall or internet settings are preventing the connection.
    A prime candidate might be the Stuffit Expander app. On my mac it would hang for 60 seconds before carrying on, the www.alladinsys.com host no longer exists, replaced by www.allumesys.com. Perhaps you should trim the set of extensions / control panels in OS9 when running under Classic.
    But it could be anything that is trying some LAN or internet access at startup, maybe even the OS9 Software Update CP/ext.
    When does it spit out these messages EXACTLY ? During the extension load ? At startup completion ? Or are you starting up OS9 by starting a Classic app ? Which one ?

  • Server "Connection Failed" message when starting Classic

    I recently updated from OS 10.2.8 to 10.4.3. Everything made the conversion smoothly except that whenenver I now startup Classic, I get this message in a dialog box:
    Connection Failed: The server may not exist or it is not operational at this time. Check the server name or IP address and try again.
    I click the "OK" button, and then it repeats the process exactly 3 more times and Classic starts and runs fine. This is consistent and never varies.
    I'm running on a LAN (with a bunch of Windows machines), which I need to affirmatively log on to (shared printers excepted). It seems like Classic is trying to automatically log on to some network, something it hadn't done under 10.2.8. I checked the system preferences for both Classic and Networking but can't find anything which seems relevant. I'll note that under Classic System Prefs. it states (under "Start/Stop") that it's using the system folder on my computer and not looking elsewhere.
    How can I stop the nuisance?
    Thanks

    Phil,
    You nailed it. Thank you!
    I moved the Sherlock first and as I dragged it to the trash, as if it were Freddie Kruger refusing to die, it triggered the "Connection Failed" message riff. However, when I rebooted Classic, I saw that removing it alone did not eliminate the problem. So, I next removed all non-System generated (i.e., the one's in created for my apps) aliases. That did it.
    I see now that the aliases that seemed to be causing the problem related to programs that I had recently moved from the startup HD to a second internal HD that I'd just installed. The "System generated" aliases all connected to programs that remained where they've always been, on the startup HD. What is confusing me is that there is no "network" that needed to be used for the non-System aliases to reach the moved programs and they're not on another "server," so don't see why that was the message I got. Additionally, normally, when an alias loses it's link to the originating program, I just get a message stating that it can't find that program. If I'd gotten the same message this time, it would have been much easier to track the problem.
    Thanks for your great tip.

  • No connection with server, connection failed, asks wifi password

    our i-pas has always worked great, suddenly we couldn't use internet anymore.  Connection failed and ask wifi password.
    I installed the new version of i-tune and re-installed our i-pad.  Still no connection.  What to do?

    Hi,
    Please make sure,
    1. Correct user ID and password entered
    2. There is no firewall/ antivirus turned on
    Thanks & Regards,
    Nagarajan

  • "Server connection failed" message

    Sometimes on my iPhone 5c I can't access new emails. All other devices work fine. Internet working on other apps on phone, too.
    Message says
    "Cannot get email. Connection to server failed"

    Hey there
    I’d be happy to help with this error message you have been receiving! It sounds like the web server hosting the emails was not able to be contacted before the request timed out. May I ask which email provider you are currently using? Also, are you using the default email app on the iPhone to access your emails?
    Thanks,
    Charise

  • BAM Server Connection FAILED

    I'm working with BAM 10.1.2 and BPEL 10.1.2.0.2. Well, I'm trying connect to the BAM server and I can't do it!!!
    Maybe I need something..... but i dont know what?
    I red that is posible fix this issue installing the BPEL PM 10.1.3 but I dont to find that download!
    help me!

    Hello - typo from my previous response - pl read last word as "access". Contact Oracle rep for quick BAM 10.1.3 access. (if this is possible for you).
    http://www.oracle.com/technology/tech/java/oc4j/10131/index.html
    http://www.oracle.com/technology/software/products/ias/soapreview.html
    BPEL 10.1.2 has BAM -sensor- connection as [preview] mode.
    Alternates - in BPEL_BAM server dialog box
    (a) donot use localhost, (b) provide domain name in CAPS (donot leave empty). (c) Provide server name in CAPS.

Maybe you are looking for

  • Consuming a Webservice created on WAS 6.20

    Hello, is it possible to generate a client proxy automatically on WAS 6.40 for a WSDL-description which is generated with the Webservicebrowser on a WAS 6.20? I tried to do this but when i test the proxy i receive the following fault-message: <ERRORT

  • HT201269 How can I delete all my data from former Iphone 4 for future sale on Ebay?

    Hello! I've just purchased an Iphone 5 from a new carrier. Now I should like to sell my former Iphone 4 but, obviously, removing all my personal data (contacts, photographs, etc.) .  How can I transfer the ringtones that I purchased from by Iphone 4?

  • HP dv3-2000 audio service not start after i run uniblue powersuite. event log says can't find path.

    after i run uniblue powersuite to clean up my registry, speedup my pc and update my drivers, I cannot start my dv3-2000 laptop. After I updated the BIOS, following the suggestion on the forum, I can get the vista start but no sound. I then checked th

  • How to automatically "get info" for MP3s?

    I drag and drop MP3s into iTunes. I like being able to stop a podcast (MP3) then later have it pick up where I stopped. To this though, I have to right click every MP3 individually, select Options then "Remember playback position". Is there a way to

  • Spell Check button doesn't work anymore

    When I click on "Spell Check" button, it seems all works fine, but as soon as I click on "Change" button, or "Go back/Edit" or "Post Message", I receive the following error message : Your spell session has expired - please go back to the posting page