Server to shut down even though a client is connected?

Is there a setting to allow the server to shut down even though a client is connected?

How old it the MacBook battery? Batteries can go bad suddenly.
There's a useful free app here: http://www.coconut-flavour.com/ that gives a lot more information about the battery and its general state of health.

Similar Messages

  • It keeps shutting down even though I set it to never

    I got my Lenovo ThinkPad Edge 13 on my 14th birthday on the 18 September, the first time it was used was when I used it. I put it on, set it up, logged on to all my accounts but after 10 minutes it just shut down my sister said it was defualt setting and that I have to change to 'never'. I went Control Panel - System and Security - Power Options on the side clicked "Change when comuptar sleeps" and changed it to Never sleep with turn of display at 1 hour and dim the display at 30 minutes. Yet everytime I use it it shuts down after 10 minutes, so I changed it to 30 minutes to test and it shuts down after 30 minutes but if you go above 30 minutes it won't do it. Please help I need to change it it shuts down over 20 times a day, when I watch a movie I have to restart it more than 5 times and for a episode for my shows The Vampire Diaries, Once Upon A Time, Game Of Thrones, and The 100 it shuts down 1o minutes before the episode finishes. I need to fix it help me please.

    This is feature of faulty battery. Most likely you still have Warranty or possibly AppleCare, make Genius reservation and take to Apple for evaluation.

  • Ever since I updated to 7.0.4 my iPhone 5 keeps shutting down even when I have 40 or 50% battery life

    This has happens about twice or three times a day. The last time when I took a photo it shut down even though I had 49% battery. When I tried to restart it I got the connect to a power source icon. Then if I wait a few mins I can restart ok and it then shows the battery level as it was before. Has anyone else had this problem? or know what is wrong and how to solve it. Thanks

    Hey RichardNWhite,
    Thanks for the question, and detailed information. To completely isolate the issue, you may want to follow these steps:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    - Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    - Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
    Learn about LCIs and corrosion.
    - Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    - After at least 15 minutes, if:
                   - The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
                   - The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
                   - Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    - If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
                   - If the display turns on, go to step 4.
                   - If the display remains black, go to next step.
    - Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to
    restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    - If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    For additional information, see this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Thanks,
    Matt M.

  • Server is shutting down

    Hi,
    I'm working with OAS 9.0.4 on AIX 5.2. I'm trying to run reports but I get the following error message:
    REP-500002: Server is shutting down.
    And sometimes the following error message:
    REP-52266: The in-process Reports Server rep_test failed to start.exception oracle.reports.RWException {
    oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
    int errorCode=52266,
    java.lang.String errorString="The in-process Reports Server rep_test failed to start.",
    java.lang.String moduleName="REP"
    I made a trace of the report server and collect the following data:
    [2006/1/21 4:15:33:415] Exception 50001 (): Server is initializing
    exception oracle.reports.RWException {
    oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
    int errorCode=50001,
    java.lang.String errorString="Server is initializing",
    java.lang.String moduleName="REP"
    at oracle.reports.utility.Utility.newRWException(Utility.java(Compiled Code))
    at oracle.reports.server.RWServer.stateCheck(RWServer.java:790)
    at oracle.reports.server.ServerImpl.newConnection(ServerImpl.java:125)
    at oracle.reports.server.ServerClassPOATie.newConnection(ServerClassPOATie.java:74)
    at oracle.reports.server._ServerClassStub.newConnection(_ServerClassStub.java:128)
    at oracle.reports.client.ReportRunner.connectToServer(ReportRunner.java(Compiled Code))
    at oracle.reports.rwclient.ServletCmdMgr.handleWebCommand(ServletCmdMgr.java(Compiled Code))
    at oracle.reports.rwclient.RWClient.handleWebCommand(RWClient.java(Compiled Code))
    at oracle.reports.rwclient.RWClient.processRequest(RWClient.java(Compiled Code))
    at oracle.reports.rwclient.RWClient.doPost(RWClient.java:488)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
    at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
    at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java(Compiled Code))
    at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java(Compiled Code))
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java(Compiled Code))
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java(Compiled Code))
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
    at java.lang.Thread.run(Thread.java:568)
    [2006/1/21 4:15:41:751] Warning 50103 (EngineManager:registerEngine): REP-55103: API URLEngine:getEngineEnvs not applicable to URL engine
    [2006/1/21 4:15:41:751] Info 56026 (EngineManager:registerEngine): Reports Server started up engine rwURLEng-0
    [2006/1/21 4:15:41:756] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Ready
    Other errors I found in trace:
    2006/1/21 4:43:24:978] Info 50002 (RWServer:shutdown): Server is shutting down
    [2006/1/21 4:43:24:978] Info 50103 (RWServer:startServer): Notify thread to exit
    [2006/1/21 4:43:24:978] Info 50103 (RWServer:startServer): RWServer thread exits
    [2006/1/21 4:43:24:979] Exception 56097 (): Engine rwEng-0 callback timeout
    exception oracle.reports.RWException {
    oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
    int errorCode=56097,
    java.lang.String errorString="Engine rwEng-0 callback timeout",
    java.lang.String moduleName="REP"
    at oracle.reports.utility.Utility.newRWException(Utility.java(Inlined Compiled Code))
    at oracle.reports.server.EngineManager.manage(EngineManager.java(Compiled Code))
    at oracle.reports.server.IdleThread.run(IdleThread.java(Compiled Code))
    Could some body help me about this errors?
    Thank you in advance,
    Jose

    Hi Martin
    Thank you for your answer. We only need to run reports using URLs (rwservlet).
    After the installation, we find the problem that DISPLAY was not set. We solve it and run the demo reports ok. Then we restarted the server (shutdown and restart including AIX), everything restarted well but we were unable to run the reports again, with the messages I described before.
    I did not see any post-installation procedure for reports and AIX, does this procedure exists? where can I find it?
    Thank you for the help,
    Jose

  • OBI Server is shutting down automatically!

    Hi Forum,
    The OBI Server is shutting down after sometime of starting the server. What could be the reason?
    Regards
    Vj

    2009-10-29 14:18:25
    Data Source Name: SH
    Client Driver Version 10.02.0001
    2009-10-29 14:18:25
    [58002] Query Cache loaded with 0 entries from saved cache files.
    2009-10-29 14:18:25
    [43030] :     Oracle BI Server started. Version: 10.1.3.4.1.090414.1900.
    2009-10-29 14:47:22
    [36007] Loading repository C:\OracleBI\server\Repository\sh.rpd.
    2009-10-29 14:47:22
    [14055] Loading subject area: SH ...
    2009-10-29 14:47:22
    [14056] Finished loading subject area: SH.
    2009-10-29 14:47:22
    [16020] Metadata Database Type: Oracle8.1
    Data Source Name: SH
    Data Source Type: Oracle 10.02.0010
    2009-10-29 14:47:22
    Data Source Name: SH
    Client Driver Version 10.02.0001
    2009-10-29 14:47:22
    [58002] Query Cache loaded with 0 entries from saved cache files.
    2009-10-29 14:47:22
    [43030] :     Oracle BI Server started. Version: 10.1.3.4.1.090414.1900.

  • My screen keeps fliping upside down , even though I have not turned the i pad

    My screen keeps "flipping" upside down even though I have not turned the I pad

    bmwdr -
    I have reported this problem from the beginning of the MBP release back in February.
    They have not solved it during any of my repairs.
    I have found the following helps, but does not solve:
    1. Disconnecting and reconnecting the magsafe power adapter
    2. Resetting your PMU
    3. Locking your Energy settings by clicking the lock in the lower left hand corner
    It seems to be a software bug that is somehow potentially related to the screen saver. When you shut your screen saver off... it sometimes disappears.

  • WebLogic server is shut down automatically

              After i install weblogic6.1 and run default server, I got the fowllowing message
              and then server is shut down automatically, I tried it days before, and it works,
              why not work now?
              Thanks in advance!
              moonriver
              <Nov 6, 2001 11:40:53 PM EST> <Notice> <Management> <Starting discovery of Managed
              Server... This feature is on by default, you may turn this off by passing -Dweblogic.management.discover=false>
              <Nov 6, 2001 11:40:58 PM EST> <Notice> <Management> <Application Poller not started
              for production server.>
              <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
              server socket for port: 7002. java.net.BindException: Address in use: JVM_Bind
              Perhaps another process is using port 7002.>
              <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <The WebLogic Server
              is no longer listening for connections. You should probably restart it.>
              <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
              requested by system>
              <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
              has been initiated.>
              <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
              server socket for port: 7001. java.net.BindException: Address in use: JVM_Bind
              Perhaps another process is using port 7001.>
              <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
              requested by system>
              <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
              has been initiated.>
              <Nov 6, 2001 11:41:58 PM EST> <Notice> <WebLogicServer> <Started WebLogic AdminServer
              "myserver" for domain "mydomain" running in Production Mode>
              

    Most likely you have another WebLogic instance already listening on 7001.
              Moonriver Sun <[email protected]> wrote:
              > After i install weblogic6.1 and run default server, I got the fowllowing message
              > and then server is shut down automatically, I tried it days before, and it works,
              > why not work now?
              > Thanks in advance!
              > moonriver
              > -----------------
              > <Nov 6, 2001 11:40:53 PM EST> <Notice> <Management> <Starting discovery of Managed
              > Server... This feature is on by default, you may turn this off by passing -Dweblogic.management.discover=false>
              > <Nov 6, 2001 11:40:58 PM EST> <Notice> <Management> <Application Poller not started
              > for production server.>
              > <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
              > server socket for port: 7002. java.net.BindException: Address in use: JVM_Bind
              > Perhaps another process is using port 7002.>
              > <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <The WebLogic Server
              > is no longer listening for connections. You should probably restart it.>
              > <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
              > requested by system>
              > <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
              > has been initiated.>
              > <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
              > server socket for port: 7001. java.net.BindException: Address in use: JVM_Bind
              > Perhaps another process is using port 7001.>
              > <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
              > requested by system>
              > <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
              > has been initiated.>
              > <Nov 6, 2001 11:41:58 PM EST> <Notice> <WebLogicServer> <Started WebLogic AdminServer
              > "myserver" for domain "mydomain" running in Production Mode>
              Dimitri
              

  • WebLogic server is shut down automatically(in win2k pro)

    After i install weblogic6.1 and run default server, I got the fowllowing message
    and then server is shut down automatically, I tried it days before, and it works,
    why not work now?
    Thanks in advance!
    moonriver
    <Nov 6, 2001 11:40:53 PM EST> <Notice> <Management> <Starting discovery of Managed
    Server... This feature is on by default, you may turn this off by passing -Dweblogic.management.discover=false>
    <Nov 6, 2001 11:40:58 PM EST> <Notice> <Management> <Application Poller not started
    for production server.>
    <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
    server socket for port: 7002. java.net.BindException: Address in use: JVM_Bind
    Perhaps another process is using port 7002.>
    <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <The WebLogic Server
    is no longer listening for connections. You should probably restart it.>
    <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
    requested by system>
    <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
    has been initiated.>
    <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
    server socket for port: 7001. java.net.BindException: Address in use: JVM_Bind
    Perhaps another process is using port 7001.>
    <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
    requested by system>
    <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
    has been initiated.>
    <Nov 6, 2001 11:41:58 PM EST> <Notice> <WebLogicServer> <Started WebLogic AdminServer
    "myserver" for domain "mydomain" running in Production Mode>

    [att1.html]

  • Server 2012 X64 R2 DNS Server keeps shutting down after inplace upgrade from Server 2012 X64

    Hi,
    ever since upgrading from Server 2012 X64 to Server 2012 R2 X64 my dns server keeps shutting down every several minutes before having to do a restart.  When viewing the event log this is all I see..
    The DNS Server service terminated unexpectedly.  It has done this 497 time(s).  The following corrective action will be taken in 60000 milliseconds: Restart the service.
    if I look in the Application Error Log,  I will also find the following:
    Faulting application name: dns.exe, version: 6.3.9600.17031, time stamp: 0x530871fb
    Faulting module name: dns.exe, version: 6.3.9600.17031, time stamp: 0x530871fb
    Exception code: 0xc0000005
    Fault offset: 0x000000000010b0e0
    Faulting process id: 0x1740
    Faulting application start time: 0x01cf531b2e3a7f5e
    Faulting application path: C:\Windows\system32\dns.exe
    Faulting module path: C:\Windows\system32\dns.exe
    Report Id: 90a4ab37-bf0e-11e3-9446-003048df3f03
    Faulting package full name:
    Faulting package-relative application ID:
    I have tried removing and then reinstalling the DNS Server role, but the same situation occurs..
    thanks,

    Hi,
    I'm going crazy,  I've upgraded my Server 2012 Standard to Server 2012 R2 Standard and now my DNS server keeps crashing since the in place upgrade.  I have finally narrowed it down to it only crashes after several minutes if I load the data from
    a file instead of the registry.  As a test I:
    -1- killed all my dns data,
    -2- uninstalled the dns server role
    -3- deleted the /windows/system32/dns directory
    -4- reinstalled the DNS server role
    -5- used the wizard to create a DNS server and a forward zone.
    everything works okay, no crashes,  then I change the advanced propertied of the DNS server to load from file, restart the DNS server and once again it crashes every 2 minutes..
    Please help,  this is killing me..
    thanks in advance..

  • Report server10g "server is shutting down"

    Hi,
    i have installed developer suit 10g on windows 2003 server and just ran "RWSERVER SERVER=RPS START" but report server status is "server is shutting down"??
    Thanks,
    Anwar

    I just tried to start report server by administrator user, its working now

  • REP-50002: Server is shutting down

    ========================================
    Subledger Accounting: Version : 12.0.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    XLAABACR module: Validate Application Accounting Definitions
    +-----------------------------
    | Starting concurrent program execution...
    +-----------------------------
    Arguments
    P_LEDGER_ID='1'
    P_UNCOMPILE_ONLY_FLAG='N'
    P_REPORT_ONLY_MODE='N'
    APPLLCSP Environment Variable set to :
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.UTF8
    Enter Password:
    REP-0069: Internal error
    REP-50002: Server is shutting down
    =========================================
    what may be the problem

    What responsibility did you launch this from? I could not find any Subledger Accounting responsibilities in R12.
    There is only one public note that talks about that error:
    Use rwclient or rwservlet(browser) for production instances 9.0.4 upwards
    http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=365534.1
    It could be there is an invalid reports mode setup in the concurrent or report definition. You will probably need a SR to get it fixed.

  • I rented a Movie and it has been loading for 3 hours now. Internet connection is fine. Have never had a problem with this before. What's really annoying is that the 24 hour time limit is counting down even though we cant watch it. Any suggestion"hours now

    I rented a Movie and it has been loading for 3 hours now. Internet connection is fine. Have never had a problem with this before. What's really annoying is that the 24 hour time limit is counting down even though we cant watch it. Any suggestions?

    The first thing to check would be your internet download speed, you can do this at www.speedtest.net.
    HD movies require a recommended speed of 6 Mbps, while SD movies require a recommended speed of 2.5 Mbps.
    Additionally, your 24 hours don't start until you begin to watch the movie, you have 30 days to start watching the movie.

  • Having trouble with music apps shutting down, even after I swipe them off the screen. They go off then come back on in a few minutes. This happens in my car either ubs plugged in, or bluetooth. ANy one else have that issue?

    Having trouble with music apps shutting down, even after I swipe them off the screen. They go off then come back on in a few minutes. This happens in my car either ubs plugged in, or bluetooth. ANy one else have that issue?

    Hi, beth.lau.gr.
    Thank you for visiting Apple Support Communities.  
    I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen.  I wont be able to give you an exact answer as to why this is happening.  However, this is the most relevant troubleshooting article for this issue.  This article also provides options to reach out to us via phone for additional assistance.  
    If your iOS device restarts, displays the Apple logo, or powers off while you're using it
    http://support.apple.com/en-us/HT203899
    Cheers, 
    Jason H.  

  • IPhone 5 shuts down even when it's on the charger

    My iPhone 5 keeps shutting down even when it has full battery. It doesn't last more than 2 minutes on and that's when I am able to turn it on. When I connect it to the charger sometimes it just flashes the apple continuously. I noticed that when it's on sometimes it doesn't connect to the Wi-Fi and I have no signal it just says searching.  It just started doing all this 3 days ago, befire that it worked perfectly fine. Does anyone know what could be wrong with it?

    Probably a bad battery. See if it qualifies for replacement: iPhone 5 Battery Replacement Program - Apple Support

  • My IPAD 4 is not working properly. it will blink and then shut down even when the battery is charged. i have done several reset on the iad. what do i do , i need help

    my IPAD 4 is not working properly. it will blink and then shut down even when the battery is charged. i have done several reset on the iad. what do i do , i need help

    iOS: Device unexpectedly restarts, displays Apple logo, or powers off
    http://support.apple.com/kb/TS5356
     Cheers, Tom

Maybe you are looking for