Server UCS B440 M2 problems Error

I have the following errors in the discover the server UCS B440 M2 in the chasis UCS 5180 the firmware is 2.1(1f)
FSM
FSM Status: In Progress
Description:
Current FSM Name: Discover
Completed at:
Progress Status: 9%
Remote Invocation Result: End Point Protocol Error
Remote Invocation Error Code:1002
Remote Invocation Description: Unable to change blade power state-MC Error (-20): Management controller cannot or failed in progressing request
thanks for your help

Hello Wilson,
I have seen that issue before being related to a power problem with the motherboard, but the issue might need further investigation.
Since there are too many commands I can request you to run to analyze this, instead of making you spend time here (this is a great place to get answers, dont get me wrong), I better recommend you to open a case with TAC as I know I will probably end up asking you to do that.
-Kenny

Similar Messages

Oracle Application Server 10.2 installation problem: Error in invoking targ

Hi,
I am installing Oracle Application server 10.2 in IBM AIX 6.1 and I encounter this error during the installation..
Error in invoking target "install" of makefile
I am in the linking part
kindly help me out.
thanks...

This could be if you miss a library or package, did you follow any note to perform the installation?
Have you read the notes in metalink about 6.1?
There is some information about oracle Aplicaitons 12, even is not the same, the packages and filesets used to be the same. try to look for them.
Greetings.

Problem with the new server UCS C220 for set IP to CIMC

Hi
We’ve a problem with the new server UCS C220.
We bought two servers UCS C220 M3 for CallManager 8.6 with High Availability.
When we turn on the server during the boot and when it tells us, oppress F8 to enter at the CIMC and set the IP. But it never enters at the CIMC.
Then, we configure our DHCP server and our switch, we connect the three gigabyte ports to our switch to give him an IP to the CIMC, so and then can enter via browser, but neither works.
Note. The dedicated management NIC does not link, the other two ports do make link.
What do you suggest to put an IP to CIMC and start installing our applications?
regards

You may have noticed that there is no DVD rom on the c220. What you need to do is:
Login into the CIMC from your browser
Luanch the KVM
Insert the VMware DVD in your machines drive
On the KVM pop up there should be a tab to mount the drive, after mounting it click on Macros and choose ctrl_alt+delete to restart.
After the VMware OS installs press F2 to enter IP.
Browse to the VMware ip to download the Vsphere client
Open the Vsphere client, enter the ip of the vmware and the username will be root and no password if you did not set one.
You can now upload OVA templates or manually create virtua machine from this enviroment.
Hope this help

Error - Oracle BI Server has encountered a problem

Dear Experts,
Oracle BI Server has encountered a problem and needs to close. We are sorry for the inconvenience.
Error Signature : szAppName : NQSServer.exe szAppVer : 10.1.3.4 szModName : msvcrt.dll
szModVer : 7.0.2600.5512 offset : 00037fd4
I am facing the above error whenever i point the RPD to Test Intance.
Can you please help me on what can be the root cause for this issue.
Please note I reinstalled OBIEE on the system but still the same issue.
Appreciate your immediate response!!
Thanks
~ Veena

i need your help on this too because i also encounter this error on 10g.
fyi, i just installed oracle 10g (10.2.0.1.0) database and 10g developer suite. i am a newbie to 10g. i used to program using 6i developer and 8i database.
this happens on three different scenarios:
1. when i click on the Canvasses node even it is a new form.
2. whenever i create a new block using the wizard upto the Layout wizard.
3. whenever i click on the Canvasses node after opening an already existing form made from 6i.
i'll be waiting for your responses. thanks.

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!

Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

Crystal Report 13 Visual Studio 2010 SQL Server 2008 R2 ODBC Problem

Hi Everybody,
I am new in Crystal Report.
I developed a web application in Visual Studio 2010, and my Database is SQL Server 2008 R2.
I created reports using Crystal Report 13 in Visual Studio and my Operating System is Windows 7 32-Bit.
I used ODBC Connection System DNS for my application.
It is running fine even after Hosting on my local PC.
But it creates problem when hosted on my Team Leader PC and Test Server.
Their Configurations are same but only difference is "SQL Server 2008" Not R2
The Error I am getting is "Failed to open the connection".
When I Host the same on my another team member PC, I am getting the error like
"Failed to open the connection. Details: [Database Vendor Code: 4060 ] Database Connector Error: ' [Database Vendor Code: 4060 ]' Failed to open the connection. Failed to open the connection. TestVr {CE268132-D2BD-43EC-BE45-0BCD847FBCDA}.rpt Details: [Database Vendor Code: 4060 ]"
I tried various solution to fix this bug.
But i am unable to do this and not getting any idea to fix this issue.
If anyone can guide I will be thankful to him.
All suggestions are appreciable.
Thank you

Hi,
Please use the top right search box. for ex below search which will return many useful kb's, articlea and forum threads where simillar issues are discussed.
[http://www.sdn.sap.com/irj/scn/advancedsearch?query=failedtoopentheconnection|http://www.sdn.sap.com/irj/scn/advancedsearch?query=failedtoopentheconnection]
Most probably the issue is missing database client driver / provider.
Install the driver used to connect the rpt to the db on the server and then create a 32 bit DSN with the same name as the dev machine..
Hope this helps,
Bhushan.

Getting an error prompt "the facebook server has returned an unknown error and is not able to fulfill your request. (2001)"

Hi. I need help regarding facebook for blackberry. I cannot post any status update, i keep on receiving an error prompt "the facebook server has returned an unknown error and is not able to fulfill your request. (2001)". it has been like this for the past 3 days. I already did the hard reboot many times, re-send service book though i do'nt think it's needed, and tried uninstalling and reinstalling the facebook application too but still getting the same error everytime i try to post a status update. I can comment to messages on my wall and other profiles, the news feed is updating in time too, i can also log-in and out to facebook with no problem, as well as other applications on my phone like foursquare, BBm, ubersocial, BB protect, BB app world, etc, are all working perfectly fine. And now I don't know what seems to be the problem.
I've already contacted my network provider and told me that the error i'm getting is beyond their scope.
Is anybody having the same problem as mine?
Can someone in BB support team help me regarding this issue and tell me what should I do?
Thank you in advance.

I got the same issue !! Since I've updated my Facebook app 2 or 3 week ago !
I can not update my status and check-in ! It gives me "the facebook server has returned an unknown error and is not able to fulfill your request. (2001) "
I can upload photo, put comment on people, like people status/picture. The news feed update perfectly !
I also tryied to uninstall reinstall the app, reboot etc etc ! I still can't update my status !!!! I've installed 3.0.0.17 this morning and the issue is still there...
I've remarked one thing... On my facebook under "privacy setting/the Apps, Games and Websites" I used to have a "blackberry app" installed. It's not there anymore and I didn't remove it.
I don't know how to reinstall it...

"DataSocket Server has encountered a problem and needs to close" - why?

I am trying to use DataSocket to publish a Front Panel control. First I start the DataSocket Server and then run a corresponding VI. It goes well once or twice but in the end DataSocket Server crashes producing an error message and offering to send an error report to Microsoft:
"National Instruments DataSocket Server has encountered a problem and needs to close. We are sorry for the inconvenience".
I wonder if there is any remedy for this. Windows firewall does not seem to be the cause - the crash happens with the firewall disabled.
Alternatively - is there any way other than using DataSocket to dynamically access data from a running VI?
Regards,
Danielis

Hi Danielis
This kind of errors usally occurs when there is a file corruption. In either the application of the configuration files. The Datasocket configuration is save in the 'cwdssini.dss' file. this is by default installed in 'C:\Program Files\National Instruments\DataSocket'. Yu could try and remove this and then run the Datasocket Server Manager once to recreate a file with default settings.
We it is a problem with the Application you could try and install a fresh copy on a other machine and run the VI and server on that machine. Or just run the server on the other machine and connact you Front panel object to that server instead.
As for other ways of doing this you could look into the Shared Variables that have been introduced in LabVIEW 8
Hope this helps
Karsten

Error in File (report server\ report.rpt): Database Connector Error

New installation of XI R2 - using Crystal Reports Version 11.5.8.826 for developement against Oracle DB.
Currently have around 20 reports running on XI (need to import ~1500 reports from Crystal Enterprise 10, but waiting to resolve this issue)
Some reports sometimes (not always) get the following error:
Error in File (report server\ report.rpt): Database Connector Error
If the report is re-scheduled, report will sometime run fine and sometimes gets the same error again.
There seems to be no logical way to determine which parameters will cause the report to fail or when.
I'm experiencing the problem on about 3 reports only - All against the same DB and only occassionally. These 20 reports were developed with CR XI and all run against the same Oracle DB.

I've got the same problem- the reports run fine in Crystal, but sometimes (not everytime) they fail in InfoView with "Database Connector Error" message. My report doesn't contain any data, just 8 sets of 4 subreports in different footer sections, which each connect to a different stored procedure. The report is to help with our server checks: we have a set of 4 different stored procedures which run on each of 8 different servers making 32 different SPs and there is a subreport in this report for each.
It does seem to be random whether this problem occurs or not- I have scheduled the report to run regularly (1 recurring instance) and sometime it works, sometimes not, but always the same failure message. I have increased the success rate by allowing the report to re-try on failure, but this does take time, and isn't really curing the problem.
I wonder whether this error could be caused by a delay in one of the SPs returning its data, and the report timing out since no data is being returned. Would anyone know whether this is likely to be the cause, and if so how to fix it? Or any suggestions what else it could be?
Thanks,
Tom

Site files moved to new (identical) server; now iWeb gives "Publish Error"

Our school district just replaced the web server where our teachers publish iWeb sites. All user accounts, passwords, IP addresses, and content moved over just fine, but now when teachers try to publish updates to their existing sites on the new server, iWeb throws a "Publish Error: Unable to communicate with FTP server..." error. Test Connection in the publishing settings works fine, as does logging in to the server using an FTP application, so we know the user accounts are okay.
An interesting twist: I published my existing site (that was experiencing this issue) to a local folder on my desktop, and used a standalone FTP application to upload and replace my iWeb site files manually; when I went in and set the iWeb publishing settings back to FTP server, it was again able to publish updates to the site without issue.
We're looking into a permissions problem on the files that were moved from the old server but so far have not been able to find any differences.
Does anyone have any ideas what may be going on? We have a couple hundred people this is affecting and if it's something we can fix on the back-end instead of having to manually replace all of those site files, that would be a great thing!

The only time that I had to move a bunch of sites to a new server I was instructed by tech support to download all the sites/files and upload them to the new location.
I would assume that, if you don't do this, the permissions could get messed up.
My hosting service uses Webshell4 to manage files on the server. To change permissions you need to select the site folder in Webshell4 and click the "CHMOD" button to get a window that allows you to do this.
Read permissions should be checked for User, Group and Other.
Write permissions would normally be set for User only.
You could try this with one site to see if this is what's required but your hosting service tech support should really help you with this. That's what they are there for.

SQL Server 2005 Update mechanism problem

Hi Gurus,
      We're faced with one SQL Server 2005 update mechanism problem. Here is my problem:
      According to our requirement, an add_on interface program is designed to execute creation of production order by calling Bapi.
      There are 3 steps in this add_on program:
      Step 1: Create production order
      Step 2: Change the information of production.
      Step 3: Some other
      After the step 1 has finished immediately step 2 is called, Howerver the information which should have inserted into database table couldn't be found from database. (Maybe because the time between two steps is too short to finish inserting)
      In order to ensure the complete of the transaction, before the step 2 executed, the information in step 1 should have inserted into database.
       Is there any solution to solve this problem?
       I guess whether there is any parameter which control the time of writing buffer into database...
Any advice is appreciated.
Thanks & Best Regards,
Derek Yang

Hi
I have the same problem, but that post didnt help me
This is the error I have:
My snapshot agent hangs.. waiting for a response from the server.. and timeouts.
This only hapens for a publication that has a filter based on HOSTNAME()
The other publications work fine
Error messages:
Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Command Text: sp_MSsetup_partition_groups
Parameters: @publication = XXXXXXX
Stack: at Microsoft.SqlServer.Replication.AgentCore.ReMapSqlException(SqlException e, SqlCommand command)
at Microsoft.SqlServer.Replication.AgentCore.AgentExecuteNonQuery(SqlCommand command, Int32 queryTimeout)
at Microsoft.SqlServer.Replication.AgentCore.ExecuteDiscardResults(CommandSetupDelegate commandSetupDelegate, Int32 queryTimeout)
at Microsoft.SqlServer.Replication.Snapshot.MergeSnapshotProvider.SetupPartitionGroups()
at Microsoft.SqlServer.Replication.Snapshot.MergeSnapshotProvider.DoRegularMergeSnapshotPreparations()
at Microsoft.SqlServer.Replication.Snapshot.MergeSnapshotProvider.DoPreArticleFilesGenerationProcessing()
at Microsoft.SqlServer.Replication.Snapshot.SqlServerSnapshotProvider.GenerateSnapshot()
at Microsoft.SqlServer.Replication.SnapshotGenerationAgent.InternalRun()
at Microsoft.SqlServer.Replication.AgentCore.Run() (Source: MSSQLServer, Error number: -2)
Get help: http://help/-2
Server XXXXXXXXX, Level 11, State 0, Procedure , Line 0
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Source: MSSQLServer, Error number: -2)
Get help: http://help/-2

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) The user name or password is incorrect

I am able to run the report fine in BIDS in the preview window, and it deployes fine. When it goes to view the report in the browser, I get the following error. There is no domain, I am using a standalone computer with SQL Server and SSRS on
this one machine.
Can anyone point to where I might configure the permission it is looking for? thanks! Steven
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect
Steven DeSalvo

Hi StevenDE2012,
Based on the error message "The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)", it seems that the Unattended Execution Account settings in Reporting Services
Configuration is not correct.
Reporting Services provides a special account that is used for unattended report processing and for sending connection requests across the network. Unattended report processing refers to any report execution process that is triggered by an event rather than
a user request. The report server uses the unattended report processing account to log on to the computer that hosts the external data source. This account is necessary because the credentials of the Report Server service account are never used to connect
to other computers. To configure the account, please refer to the following steps:
Start the Reporting Services Configuration tool and connect to the report server instance you want to configure.
On the Execution Account page, select Specify an execution account.
Type the account and password, retype the password, and then click Apply.
In addition, please verify you have access to the Report Server database by following steps:
Go to SQL Server Reporting Services Configuration Manager, make sure the configuration is correct.
Go to Database, Verify that you can connect to the database.
Make sure you are granted public and RSExecRole roles.
Reference:
Configure the Unattended Execution Account
Configure a Report Server Database Connection
If the problem is unresolved, i would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
Thanks,
Wendy Fu

SQL Server 2008 R2 Reporting Service Error

Hi everybody,
I have an error when i try to access
http://localhost/ReportServer
The report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError)
I have found lots of posts according this error but any of it describes my error.
Do you have any ideas about problem reason?

i have serious problem about SSRS 2008 R2.i could not implement custom form authentication to SSRS 2008 R2.i have problem -useridentity-about below code ; i always get "Anonymous logon is not configured. userIdentity should not be null!" my report
server log.
public void GetUserInfo(out IIdentity userIdentity, out IntPtr userId)
         // If the current user identity is not null,
         // set the userIdentity parameter to that of the current user
         if (HttpContext.Current != null
               && HttpContext.Current.User != null)
               userIdentity = HttpContext.Current.User.Identity;
         else
         // The current user identity is null. This happens when the user attempts an anonymous logon.
         // Although it is ok to return userIdentity as a null reference, it is best to throw an appropriate
         // exception for debugging purposes.
         // To configure for anonymous logon, return a Gener
             System.Diagnostics.Debug.Assert(false, "Warning: userIdentity is null! Modify your code if you wish to support anonymous logon.");
             throw new NullReferenceException("Anonymous logon is not configured. userIdentity should not be null!");
         // initialize a pointer to the current user id to zero
         userId = IntPtr.Zero;

SharePoint 2010 Application server has SQL timeout problem

Hi All,
Our SharePoint has App & WFE servers, and the SQL server is always on. BTW, App server sometimes has timeout problem as follow, has any idea on it? This problem does not occur timing, our SP 10 is RTM version.
Error Log:
01/29/2015 17:25:29.96 OWSTIMER.EXE (0x0A78)
0x0B08
SharePoint Foundation Monitoring
nasq Medium
Entering monitored scope (Timer Job job-workflow)
5a91b888-0f2e-46fe-9ee0-96c81c6581bf
01/29/2015 17:25:50.98 OWSTIMER.EXE (0x0A78)
0x0B08
SharePoint Foundation Database
880i High
System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean
breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error) at
System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadNetworkPacket() at System.Data.SqlClient.TdsParser.ConsumePreLoginHandshake(Boolean
encrypt, Boolean trustServerCert, Boolean& marsCapable) at System.Data.SqlCl...
5a91b888-0f2e-46fe-9ee0-96c81c6581bf
01/29/2015 17:25:50.98* OWSTIMER.EXE (0x0A78)
0x0B08
SharePoint Foundation Database
880i High
...ient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) at
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String
host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString
connectionOptions, String newPassword, Bo...
5a91b888-0f2e-46fe-9ee0-96c81c6581bf
01/29/2015 17:25:50.98* OWSTIMER.EXE (0x0A78)
0x0B08
SharePoint Foundation Database
880i High
...olean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean
redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection
owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection
owningObject) at System.... 5a91b888-0f2e-46fe-9ee0-96c81c6581bf
01/29/2015 17:25:50.98* OWSTIMER.EXE (0x0A78)
0x0B08
SharePoint Foundation Database
880i High
...Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection
outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at Microsoft.SharePoint.Utilities.SqlSession.OpenConnection()
5a91b888-0f2e-46fe-9ee0-96c81c6581bf
01/29/2015 17:25:50.98 OWSTIMER.EXE (0x0A78)
0x0B08
SharePoint Foundation Database
880k High
at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQueryData monitoringData, Boolean retryForDeadLock) at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand
command, CommandBehavior behavior) at Microsoft.SharePoint.Administration.SPDatabase.get_IsReadOnly() at Microsoft.SharePoint.Administration.SPContentDatabaseLockManager.CanProcessContentDatabase(SPContentDatabase contentDatabase)
at Microsoft.SharePoint.Administration.SPWorkItemJobDefinition.Execute(SPJobState jobState) at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService,
Int32& result) at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(Time...
5a91b888-0f2e-46fe-9ee0-96c81c6581bf
01/29/2015 17:25:50.98* OWSTIMER.EXE (0x0A78)
0x0B08
SharePoint Foundation Database
880k High
...rJobExecuteData& data, Int32& result)
5a91b888-0f2e-46fe-9ee0-96c81c6581bf
01/29/2015 17:25:50.98 OWSTIMER.EXE (0x0A78)
0x0B08
SharePoint Foundation Database
880j High
SqlError: 'Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.' Source: '.Net SqlClient Data Provider' Number: -2 State: 0 Class: 11 Procedure: '' LineNumber: 0 Server:
'spsql' 5a91b888-0f2e-46fe-9ee0-96c81c6581bf
01/29/2015 17:25:50.98 OWSTIMER.EXE (0x0A78)
0x0B08
SharePoint Foundation Database
3355 Critical
Cannot connect to SQL Server. spsql not found. Additional error information from SQL Server is included below. Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
5a91b888-0f2e-46fe-9ee0-96c81c6581bf
01/29/2015 17:25:50.98 OWSTIMER.EXE (0x0A78)
0x0B08
SharePoint Foundation Database
tzku High
ConnectionString: 'Data Source=spsql;Initial Catalog=WSS_Content;Integrated Security=True;Enlist=False;Asynchronous Processing=False;Connect Timeout=15' ConnectionState: Closed ConnectionTimeout: 15
5a91b888-0f2e-46fe-9ee0-96c81c6581bf
01/29/2015 17:25:50.98 OWSTIMER.EXE (0x0A78)
0x0B08
SharePoint Foundation Database
85t4 High
An error occured while attempting to verify that the database is read only for database WSS_Content. The error contained the following message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not
responding. 5a91b888-0f2e-46fe-9ee0-96c81c6581bf
01/29/2015 17:25:51.00 OWSTIMER.EXE (0x0A78)
0x0B08
SharePoint Foundation Monitoring
b4ly High
Leaving Monitored Scope (Timer Job job-workflow). Execution Time=21043.2150707921
5a91b888-0f2e-46fe-9ee0-96c81c6581bf
Thnaks.
Ben

What is the latency (measured via ping) between the App and SQL Server? SharePoint 2010 RTM hasn't been supported for quite some time. Upgrade to SP2 and see if it resolves the issue.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

"The iphone software update server could not be contacted" - error message recieved when i try to update to 5.1.1 via itunes , what can i do ?

The iphone software update server could not be contacted" - error message recieved when i try to update to 5.1.1 via itunes , what can i do ?

Dear Lawrence Finch:
If you're still around I hope you see this message, as you're the FIRST person (after reading every link, thread, other sites, apple support articles, etc.) to mention JB may be causing this iTunes popup window to REPEATEDLY occur:
"The iPhone software update server could not be contacted."
No, I did not hack anything (are you kidding? Grannies don't hack!), but I unknowingly bought a 3Gs iOS 3.1 from ebay that was not advertised as JB. Since it is like brand new, I was going to keep it (because my old backup is iOS 3.1.2) & was trying to simply restore & update, which (I thought) would remove the JB (that's what everybody says at forums, etc).
Instead, after "erasing all settings/content" (inside phone's Settings to get the prior person's name out of there), it is now stuck in White Apple Mode.
Put it in DFU/Recovery Mode & connect to iTunes but that stupid above message keeps appearing & I have already read/tried EVERYTHING to get rid of that message, starting with:
1. OLD phones (3Gs) with OLD iOS 3.1+ should work FINE with OLD Mac (iBook) with OLD OSX (Tiger 10.4.11) with OLD iTunes (9.2.1[5]). So that can't be the problem.
Here's all the other things apple & others say to check which I already checked:
2. USB ports are FINE, both work FINE, so that's not the problem.
3. No "extra USB devices" are connected, ONLY a mouse, & then the phone (yes, I tried it w/o the mouse connected but that didn't help).
4. No "usb hubs."
5. Latest iTunes for this OSX has already been DL'd (iTunes 9.2.1[5]). If you know of a newer one for this OSX, please advise.
6. No antivirus software.
7. No security software.
8. No routers; only 1 comcast modem, period. Wired Ethernet.
9. No wifi gadgets, no wifi at all.
10. No firewalls, except what is on iBook in the SHARING/System-Prefs. section. It's turned OFF.
11. Did the hosts/terminal thing sudo nano whatever it was. There were only 3 lines, NO gs.apple.com:
xxxxx local host
xxxxx broadcast host
xxxx local host
Oh, & btw, ATT officially unlocked this phone (after I filled out their online forms) but I can't finish the process via iTunes to get their Confirmation that "Device is Now Unlocked," so I can use T-Mo.
So that's it. If you have any other ideas of what to do from here, since from your comment, maybe it's the stupid JB on this phone that is causing the problem (???), please advise.
Many thanks!

Server UCS B440 M2 problems Error

Similar Messages

Maybe you are looking for