Server Update Wizard for Unity 7

I can't seem to find any documentation on this, but I'm basically looking for best practices when running the server update wizard.
For example, should I run the update wizard on the failover server first with the "automatic failover and failback" and "file replication" disabled?
Any info is appreciated.  Thanks.

If you have a Unity failover setup with automatic failover configured, then you could safely install updates on the Primary server and allow failover/failback to work as configured.  In this manner, Unity will failover when the server reboots and failover when the server is back online and services are up.  Then when you update the failover server, it just requires install/reboot - i.e., all else is operating normally.  The process can be done in the reverse as well.  Update backup first, then primary.
As far as best practice is concerned, this is probably flexible since the SUW is usually a pretty benign process.  The best practice would be to perform during off-hours when call volume is low.  You shouldn't need to tweak any failover/failback settings as long as you're operating during an approved window.
Hailey
Please rate helpful posts!

Similar Messages

  • Server update wizard for unity 7 what's in it ?

    Hi
    I am trying to find out what patches are applied to the server when you run 'ServerUpdatesWizard-v.3.0.05-042010' for Unity 7.  Can find links to older patches detailing which MS patches are being applied but not to this one.  Help pointing me in the right direction would be greatly appreciated.
    Thanks
    Phil

    Hi Phil,
    Wizard Version 3.0(5), April 2010
    Cisco Unity Server Updates wizard version 3.0(5) installs the following software:
    •Cisco Security Agent for Cisco Unity version 3.1(7).
    •The Microsoft security updates listed in the following sections:
    –Wizard Version 3.0(4), February 2010
    –Wizard Version 3.0(3), January 2010
    –Wizard Version 3.0(2), December 2009
    •The Microsoft security updates listed below.
    In addition, when this version of the wizard is run on Windows Server 2003 SP1 or SP2, it applies the registry edit described in Microsoft Knowledge Base article KB 928046. The registry edit fixes a known issue in Cisco Unity in which administering the system over remote desktop connections in console mode crashed the Cisco Unity-CM TSP.
    April 2010
    –KB 948496, An update to turn off default SNP features is available for Windows Server 2003-based and Small Business Server 2003-based computers
    –MS10-018, KB 980182 (Critical), Cumulative Security Update for Internet Explorer
    December 2008
    –KB 955839, December 2008 cumulative time zone update for Microsoft Windows operating systems
    July 2008
    –KB 953988, An application that uses the IEnumVARIANT interface triggers a memory leak, and this causes system performance to decrease on a Windows Server 2003-based computer
    http://www.cisco.com/en/US/docs/voice_ip_comm/unity/updates/wizard/2010cuupwz.html
    Cheers!
    Rob

  • Unity Server Update Wizard v.3.0(22) or v.3.0(20)

    I would like to find out what updates are contained within the following:
    Unity Server Update Wizard version 3.0(20)
    Unity Server Update Wizard version 3.0(22)
    Both have the same release date of Dec. 30th, 2011.
    I have checked the http://www.cisco.com/en/US/docs/voice_ip_comm/unity/updates/wizard/2011cuupwz.html link, but it hasn't been updated since September.

    Thanks for your response. I guess in my heart of hearts, I'd convinced myself that the Unity SUW was the way to go but with Microsoft issuing "out of band” critical updates (the latest one is for IE if memory serves), it was useful to see what others are doing.
    I'll follow your advice and stick with Cisco
    Best regards
    Richard

  • Convert a SQL Server Update Statement for Oracle

    Hi,
    i need to convert an update statement written for SQL Server to make it work on Oracle,
    the update is the following:
    UPDATE     TABLE1
    SET     CDate = TBL2.CDate
    FROM      TABLE1 TBL1
              JOIN TABLE2 TBL2 ON TBL2.Code = TBL1.TBL2Code
              JOIN TABLE3 TBL3 ON TBL3.Id = TBL1.Id
    WHERE     TBL3.TypeCode = '07'
    how can i make it compatible with oracle?
    thanks!!

    Billy  Verreynne  wrote:
    Karthick_Arp wrote:
    Try this
    <snipped>Dislike such an approach that requires multiple hits on the same tables. This is never scalable. A key performance issue is to do only one pass through a data set when possible and not do multiple passes.Yes i understand. But to do a update on a join the table must be a Key Preserved Table. And for a normal Update it is necessory to have an EXISTS clause so that we dont update the non-matching rows to NULL.

  • Unity 5 Software Updates Wizard

    The Untiy SUW download listings for 2010 don't include Untiy 5.0. Does SUW 3.0(3) and 3.0(4) work with Unity 5 also? The latest version listed for Unity 5.0 was 3.0(2), which I have installed.
    Thanks
    Chris

    Yes, the newer versions can be run on Unity 5. See the link below which states:
    The Cisco Unity Server Updates wizard can be run on the following Cisco Unity and
    Cisco Unity–related servers:•
    Cisco Unity 5.x, 7.x, and 8.x servers.
    Cisco Unity 5.x and 7.x voice-recognition servers.
    http://www.ciscosystems.org.ph/en/US/docs/voice_ip_comm/unity/updates/wizard/2010cuupwz.pdf
    Hope this helps.
    Brandon

  • Sharepoint 2010 - Error while running Configuration wizard for SP 2010 server farm

    Hi All,
    I am trying to set up a SP 2010 farm. I have windows server 2008 R2 installed and was able to install SP 2010 successfully. However when I ran the Sp 2010 Products and configuration wizard I am getting the following error at Step 3.
     Failed to create the configuration database.
    An exception of type System.Collections.Generic.KeyNotFoundException was thrown.  Additional exception information: The given key was not present in the dictionary.
    System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
       at System.ThrowHelper.ThrowKeyNotFoundException()
       at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
    I have installed all the prerequisites and I am on Microsoft Geneva Framework 1.0.30624.0 . I saw on a blog that Microsoft Geneve Framework beta 2 will actually cause the above problem. However I encountered the error with Beta 1 version as well.
    Any ideas why this is happening?

    Hello together,
    I get the same error mentioned above while running the configuration wizard.
    My Serverenvironment:
    - MS Server 2008 R2 Enterprise
    - Virtual Machine (Host Machine also R2 Enterprise)
    - SQL Server 2008 -- Cumulative Update 4 for SQL Server 2008 Service Pack 1 installed
    - Prerequisites installed without error (and current versions)
    Error information:
    "Failed to create the configuration database"
    "An exception of type System.Collections.Generic.KeyNotFoundException was thrown. Additional exception information:
    The given key was not present in the dictionary"
    The logfile has the following entry:
    7/2009 10:52:48  9  ERR                    Task configdb has failed with an unknown exception
    12/07/2009 10:52:48  9  ERR                    Exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
       at System.ThrowHelper.ThrowKeyNotFoundException()
       at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
       at Microsoft.SharePoint.Utilities.SPUtility.GetUserPropertyFromAD(SPWebApplication webApplicaiton, String loginName, String propertyName)
       at Microsoft.SharePoint.Administration.SPManagedAccount.GetUserAccountControl(String username)
       at Microsoft.SharePoint.Administration.SPManagedAccount.Update()
       at Microsoft.SharePoint.Administration.SPProcessIdentity.Update()
       at Microsoft.SharePoint.Administration.SPApplicationPool.Update()
       at Microsoft.SharePoint.Administration.SPWebApplication.CreateDefaultInstance(SPWebService service, Guid id, String applicationPoolId, SPProcessAccount processAccount, String iisServerComment, Boolean secureSocketsLayer, String iisHostHeader, Int32 iisPort, Boolean iisAllowAnonymous, DirectoryInfo iisRootDirectory, Uri defaultZoneUri, Boolean iisEnsureNTLM, Boolean createDatabase, String databaseServer, String databaseName, String databaseUsername, String databasePassword, SPSearchServiceInstance searchServiceInstance, Boolean autoActivateFeatures)
       at Microsoft.SharePoint.Administration.SPWebApplication.CreateDefaultInstance(SPWebService service, Guid id, String applicationPoolId, IdentityType identityType, String applicationPoolUsername, SecureString applicationPoolPassword, String iisServerComment, Boolean secureSocketsLayer, String iisHostHeader, Int32 iisPort, Boolean iisAllowAnonymous, DirectoryInfo iisRootDirectory, Uri defaultZoneUri, Boolean iisEnsureNTLM, Boolean createDatabase, String databaseServer, String databaseName, String databaseUsername, String databasePassword, SPSearchServiceInstance searchServiceInstance, Boolean autoActivateFeatures)
       at Microsoft.SharePoint.Administration.SPAdministrationWebApplication.CreateDefaultInstance(SqlConnectionStringBuilder administrationContentDatabase, SPWebService adminService, IdentityType identityType, String farmUser, SecureString farmPassword)
       at Microsoft.SharePoint.Administration.SPFarm.CreateAdministrationWebService(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
       at Microsoft.SharePoint.Administration.SPFarm.CreateBasicServices(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
       at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
       at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
       at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
       at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
       at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
    Any suggestions?
    Thanks
    Christoph

  • Do I need to install Security Hotfix (KB2977319) after Cumulative Update 12 for SQL Server 2008 R2 SP2

    HI,
    I have installed Cumulative Update 12 for SQL Server 2008 R2 SP2 on my SharePoint instances. This was to resolve a known  issue faced with the instance. CU12 helped resolve the issue. My company is rather strict regarding security hotfixes. But I am
    not sure if this particular hotfix [Security Hotfix (KB2977319)] is required if the instance has CU12 applied.
    Tested this on a Lab server, the installation did run fine, the summary log also stated that the KB is applied. But the Build Number did not change. Hence the doubt.
    Overall summary:
      Final result:                  Passed
      Exit code (Decimal):           0
      Exit message:                  Passed
      Start time:                    2014-09-06 10:31:21
      End time:                      2014-09-06 10:55:49
      Requested action:              Patch
    Instance SPNTSQLTRN overall summary:
      Final result:                  Passed
      Exit code (Decimal):           0
      Exit message:                  Passed
      Start time:                    2014-09-06 10:48:08
      End time:                      2014-09-06 10:55:45
      Requested action:              Patch
    Package properties:
      Description:                   SQL Server Database Services 2008 R2
      ProductName:                   SQL2008
      Type:                          RTM
      Version:                       10
      SPLevel:                       2
      KBArticle:                     KB2977319
      KBArticleHyperlink:            http://support.microsoft.com/?kbid=2977319
      PatchType:                     QFE
      AssociatedHotfixBuild:         0
      Platform:                      x64
      PatchLevel:                    10.52.4321.0
      ProductVersion:                10.52.4000.0
      GDRReservedRange:              10.50.4001.0:10.50.4199.0;10.50.4200.0:10.50.4250.0
      PackageName:                   SQLServer2008-KB2977319-x64.exe
      Installation location:         e:\ac2af22d88ee645b5b32b5c178\x64\setup\
    Please inform if I need to apply the hotfix on CU12. Thanks in advance.
    John S

    Yes you must install Security update mentioned in KB 2977319 it is important for SQL Server to be patches with this security update. Without this it could allow an attacker to compromise your system and gain control over it.
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Articles

  • October 2014 update rollup for Windows Server 2012 R2 and Data Protection Manager 2012 R2

    Hello all,
    After installing the October 2014 update rollup for Windows Server 2012 R2 (KB2995388) on our Windows 2012 R2 Core Edition backup jobs of System State start to Fail, below the generic error:
    The replica of Non VSS Datasource Writer on hostname.domain is inconsistent with the protected data source. All protection activities for this data source will fail until the replica is synchronized with consistency check.
    The job was cancelled. The user either cancelled the job or modified the associated protection group.
    Removing the update rollup all jobs complete without errors. Somebody is expiriencing the same issue? How can we resolve the problem?
    Thnks, Andrea

    Hi Andrea,
    Have you installed the update 2919355?
    To apply update 2995388, you must first install update 2919355 on Windows 8.1 or Windows Server 2012 R2.
    According to the official website, the issue which you described is not listed as the known issue.
    Please uninstall this update and continue to monitor the official website for the latest news.
    Best Regards.
    Steven Lee
    TechNet Community Support

  • Hello. After this update(Java for OS X 2013-003) stop working Ps3 media server. How to fix it?

    Hello. After this update(Java for OS X 2013-003) stop working Ps3 media server. How to fix it?

    I fix it. I restored the contents of /System/Library/Java/JavaVirtualMachines with the contents found in my latest TimeMachine backup from before the update, PMS works like  again. Something in the latest Java update does break the PS3 mediaserver.

  • Hello.....after updating to Yosemite, i can't get my exchange mail to work.  It keeps saying can't connect to exchange server and asks for my password.  My mail is still working fine on android phone and ipad2.  Can someone help?

    Hello....after updating to Yosemite my mail isn't working .  Keeps saying can't connect to exchange server and asking for password

    I am having this exact same problem with my gmail account. Hopefully someone will have a remedy.

  • Cumulative update 15 for SQL Server 2012 SP1 is released

    Cumulative update 15 for SQL Server 2012 SP1 is released
    http://support.microsoft.com/en-us/kb/3038001
    MDS related fix is:
    FIX: Add three stored procedures to clean up history that is created when you use SQL Server 2012 MDS
    http://support.microsoft.com/en-us/kb/3036601
    After using MDS for a while, the transaction/validation/staging history may grow very large. In this CU we provide 3 store procedure to clean them up manually.
    The fix will be ported over to SQL 2012 SP2 and SQL 2014 CUs in the coming 2 months.
    In next SQL Server release, it will be automated by MDS maintenance job.
    --@ModelID is the model ID that you clean up the log for.
    --@CLeanupOlderThanDate is the date before that the logs or records is deleted.
    DECLARE @CleanupOlderThanDate date = '<Date>', @ModelID INT = <ID>
    --Cleanup Transaction History
    EXEC mdm.udpTransactionsCleanup @ModelID, @CleanupOlderThanDate;
    --Cleanup Validation History
    EXEC mdm.udpValidationsCleanup @ModelID, @CleanupOlderThanDate;
    --Cleanup entity-based staging table
    EXEC mdm.udpEntityStagingBatchTableCleanup @ModelID, @CleanupOlderThanDate;

    Hi SelvaOnline,
    I would recommend to install SP2 and the hotfix that came after it.
    If you don't have a reason to install a CU than don't bother with it.
    SP2:
    http://www.microsoft.com/en-us/download/details.aspx?id=43340
    Hotfix for SP2;
    http://support.microsoft.com/kb/2969896/en-us
    Thanks, 
    Teun

  • Cumulative update 5 for SQL Server 2012 SP2 is released

    Cumulative update 5 for SQL Server 2012 SP2 is released
    https://support.microsoft.com/en-us/kb/3037255
    MDS related fix is:
    FIX: The notification email link is broken when a special character is part of the URL in SQL Server 2012 MDS
    http://support.microsoft.com/en-us/kb/3036201

    Hello,
    The following blog shows the latest builds (updates) available for each version of SQL Server.
    http://sqlserverbuilds.blogspot.com/
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Where is Support for Windows Update issues for Windows Server?

    Where is Support for Windows Update Issues for Windows Server?
    Windows Update keeps prompting to install an important update, KB2871690 and continually fails with error code 0x800f922
    I ran all the fixes I can find, it still fails.
    I also tried the manual install, fails.
    Microsoft used to provide no charge support for Windows Update issues. They additionally offer online fixes  for other versions of windows, but not server, and I can't find a forum.
    I also cannot ignore the update, it continually prompts.
    I ran the windowsupdate.diagcab and it continually states it fixes Windows Update error 0x80070057, by resetting windows update data store. It further states it fixes Problems installing recent updates.
    But it doesn't. I've run it 50 times, and it says the same thing every time.
    So there is no support for windows update, and no support for windowsupdate.diagcab.
    What's the deal?

    I've done the SFC/ SCANNOW and DISM
    here is the cbs.log
    What are we looking for?
    2013-12-04 19:48:19, Info                  DISM   PID=1612 TID=1616 Scratch directory set to 'X:\$WINDOWS.~BT\Windows\TEMP\'. - CDISMManager::put_ScratchDir
    2013-12-04 19:48:19, Info                  DISM   PID=1612 TID=1616 DismCore.dll version: 6.2.9200.16384 - CDISMManager::FinalConstruct
    2013-12-04 19:48:19, Info                  DISM   PID=1612 TID=1616 Scratch directory set to 'X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360'. -
    CDISMManager::put_ScratchDir
    2013-12-04 19:48:19, Info                  DISM   PID=1612 TID=1616 Successfully loaded the ImageSession at "X:\$Windows.~BT\sources" - CDISMManager::LoadLocalImageSession
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Failed to get and initialize the PE Provider.  Continuing by assuming
    that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Manager: PID=1612 TID=1616 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE:
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE: <----- Starting Dism.exe session ----->
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE:
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE: Host machine information: OS Version=6.2.9200, Running architecture=amd64, Number of processors=4
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE: Dism.exe version: 6.2.9200.16384
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE: Executing command line: X:\$Windows.~BT\sources\dism.exe  /logpath:X:\$Windows.~BT\sources\Panther\cbs.log
    /scratchdir:X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360 /image:X:\ /is-serviceable
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Loading Provider from location X:\$Windows.~BT\sources\FolderProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Connecting to the provider located at X:\$Windows.~BT\sources\FolderProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Loading Provider from location X:\$Windows.~BT\sources\WimProvider.dll -
    CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Warning               DISM   DISM Provider Store: PID=1612 TID=1616 Failed to Load the provider: X:\$Windows.~BT\sources\WimProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Loading Provider from location X:\$Windows.~BT\sources\VHDProvider.dll -
    CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Warning               DISM   DISM Provider Store: PID=1612 TID=1616 Failed to Load the provider: X:\$Windows.~BT\sources\VHDProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Loading Provider from location X:\$Windows.~BT\sources\ImagingProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Warning               DISM   DISM Provider Store: PID=1612 TID=1616 Failed to Load the provider: X:\$Windows.~BT\sources\ImagingProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Loading Provider from location X:\$Windows.~BT\sources\CompatProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Connecting to the provider located at X:\$Windows.~BT\sources\CompatProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: FolderManager
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: Compatibility Manager.
    2013-12-04 19:48:20, Warning               DISM   DISM.EXE: Failed to load WimManager. Try running from the Deployment Tools Command Prompt. If the issue persists, ensure that wimgapi.dll
    and wimserv.exe are up to date.
    2013-12-04 19:48:20, Warning               DISM   DISM.EXE: Failed to add any commands.
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
    2013-12-04 19:48:20, Info                  DISM   DISM Manager: PID=1612 TID=1616 physical location path: X:\ - CDISMManager::CreateImageSession
    2013-12-04 19:48:20, Info                  DISM   DISM Manager: PID=1612 TID=1616 Copying DISM from "X:\Windows\System32\Dism" - CDISMManager::CreateImageSessionFromLocation
    2013-12-04 19:48:20, Info                  DISM   DISM Manager: PID=1612 TID=1616 Successfully loaded the ImageSession at "X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD"
    - CDISMManager::LoadRemoteImageSession
    2013-12-04 19:48:20, Info                  DISM   DISM Image Session: PID=1644 TID=1656 Instantiating the Provider Store. - CDISMImageSession::get_ProviderStore
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Initializing a provider store for the IMAGE session type. - CDISMProviderStore::Final_OnConnect
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\OSProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\OSProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:20, Info                  DISM   DISM OS Provider: PID=1644 TID=1656 Defaulting SystemPath to X:\ - CDISMOSServiceManager::Final_OnConnect
    2013-12-04 19:48:20, Info                  DISM   DISM OS Provider: PID=1644 TID=1656 Defaulting Windows folder to X:\Windows - CDISMOSServiceManager::Final_OnConnect
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Attempting to initialize the logger from the Image Session. - CDISMProviderStore::Final_OnConnect
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\LogProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\LogProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\PEProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Warning               DISM   DISM Provider Store: PID=1644 TID=1656 Failed to Load the provider: X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\PEProvider.dll.
    - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Failed to get and initialize the PE Provider.  Continuing by assuming
    that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Manager: PID=1612 TID=1616 Image session successfully loaded from the temporary location: X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD
    - CDISMManager::CreateImageSession
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Getting Provider OSServices - CDISMProviderStore::GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM OS Provider: PID=1644 TID=1656 Setting SystemPath to X:\ - CDISMOSServiceManager::SetSystemPath
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Target image information: OS Version=6.2.9200.16384, Image architecture=amd64
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Getting the collection of providers from an image provider store type. -
    CDISMProviderStore::GetProviderCollection
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\CbsProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\CbsProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Package Manager: PID=1644 TID=1656 Finished initializing the CbsConUI Handler. - CCbsConUIHandler::Initialize
    2013-12-04 19:48:22, Info                  DISM   DISM Package Manager: PID=1644 TID=1656 Loaded servicing stack for offline use only. - CDISMPackageManager::RefreshInstanceAndLock
    2013-12-04 19:48:22, Info                  DISM   DISM Package Manager: PID=1644 TID=1656 Loaded servicing stack for offline use only. - CDISMPackageManager::RefreshInstanceAndLock
    2013-12-04 19:48:22, Info                  DISM   DISM Package Manager: PID=1644 TID=1656 Loaded servicing stack for online use only. - CDISMPackageManager::RefreshInstanceAndLock
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\MsiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\MsiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\IntlProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\IntlProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\IBSProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Warning               DISM   DISM Provider Store: PID=1644 TID=1656 Failed to Load the provider: X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\IBSProvider.dll.
    - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\DmiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\DmiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM OS Provider: PID=1644 TID=1656 Get the registry path to the SOFTWARE hive located at X:\Windows\system32\config\SOFTWARE
    and determine if it is loaded. - CDISMOSServiceManager::DetermineBootDrive
    2013-12-04 19:48:22, Info                  DISM   DISM Driver Manager: PID=1644 TID=1656 Further logs for driver related operations can be found in the target operating
    system at %WINDIR%\inf\setupapi.offline.log - CDriverManager::Initialize
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\UnattendProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\UnattendProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\Wow64provider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Warning               DISM   DISM Provider Store: PID=1644 TID=1656 Failed to get the IDismObject Interface - CDISMProviderStore::Internal_LoadProvider(hr:0x80004002)
    2013-12-04 19:48:22, Warning               DISM   DISM Provider Store: PID=1644 TID=1656 Failed to Load the provider: X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\Wow64provider.dll.
    - CDISMProviderStore::Internal_GetProvider(hr:0x80004002)
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\SmiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\SmiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\EmbeddedProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Warning               DISM   DISM Provider Store: PID=1644 TID=1656 Failed to Load the provider: X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\EmbeddedProvider.dll.
    - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\AppxProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\AppxProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\AssocProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\AssocProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\TransmogProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\TransmogProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Transmog Provider: PID=1644 TID=1656 Current image session is [OFFLINE] - CTransmogManager::GetMode
    2013-12-04 19:48:22, Info                  DISM   DISM Transmog Provider: PID=1644 TID=1656 Determined WinDir path = [X:\Windows] - CTransmogManager::GetWinDirPath
    2013-12-04 19:48:22, Info                  DISM   DISM Transmog Provider: PID=1644 TID=1656 GetProductType: ProductType = [ServerNT] - CTransmogManager::GetProductType
    2013-12-04 19:48:22, Info                  DISM   DISM Transmog Provider: PID=1644 TID=1656 Product Type: [ServerNT] - CTransmogManager::Initialize
    2013-12-04 19:48:22, Info                  DISM   DISM Transmog Provider: PID=1644 TID=1656 Product Type ServerNT : [Yes] - CTransmogManager::Initialize
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: OSServices
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Package Manager
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Package Manager.
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: MsiManager
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: MsiManager.
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: IntlManager
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: IntlManager.
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DriverManager
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DriverManager.
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Unattend Manager
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Unattend Manager.
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: SmiManager
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: AppxManager
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: AppxManager.
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: AssocManager
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: AssocManager.
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Edition Manager
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: Edition Manager.
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Package Manager: PID=1644 TID=1672 Processing the top level command token(is-serviceable). - CPackageManagerCLIHandler::Private_ValidateCmdLine
    2013-12-04 19:48:22, Info                  DISM   DISM Package Manager: PID=1644 TID=1672 Attempting to route to appropriate command handler. - CPackageManagerCLIHandler::ExecuteCmdLine
    2013-12-04 19:48:22, Info                  DISM   DISM Package Manager: PID=1644 TID=1672 Routing the command... - CPackageManagerCLIHandler::ExecuteCmdLine
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Found the OSServices.  Waiting to finalize it until all other providers
    are unloaded. - CDISMProviderStore::Final_OnDisconnect
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Found the OSServices.  Waiting to finalize it until all other providers
    are unloaded. - CDISMProviderStore::Final_OnDisconnect
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Found the PE Provider.  Waiting to finalize it until all other providers
    are unloaded. - CDISMProviderStore::Final_OnDisconnect
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(DISM Package Manager) - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Package Manager: PID=1644 TID=1672 Finalizing CBS core. - CDISMPackageManager::Finalize
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: DISM Package Manager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(MsiManager) - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: MsiManager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(IntlManager) - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: IntlManager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(DriverManager) - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: DriverManager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(DISM Unattend Manager) - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: DISM Unattend Manager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(SmiManager) - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: SmiManager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(AppxManager) - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: AppxManager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(AssocManager) - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: AssocManager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(Edition Manager) - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: Edition Manager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Releasing the local reference to OSServices. - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: OSServices - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:24, Info                  DISM   DISM OS Provider: PID=1644 TID=1672 Successfully unloaded all registry hives. - CDISMOSServiceManager::Final_OnDisconnect
    2013-12-04 19:48:24, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Releasing the local reference to DISMLogger.  Stop logging. - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:24, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
    2013-12-04 19:48:24, Info                  DISM   DISM.EXE:
    2013-12-04 19:48:24, Info                  DISM   DISM.EXE: <----- Ending Dism.exe session ----->
    2013-12-04 19:48:24, Info                  DISM   DISM.EXE:
    2013-12-04 19:48:24, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Found the OSServices.  Waiting to finalize it until all other providers
    are unloaded. - CDISMProviderStore::Final_OnDisconnect
    2013-12-04 19:48:24, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:24, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Disconnecting Provider: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:24, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Releasing the local reference to DISMLogger.  Stop logging. - CDISMProviderStore::Internal_DisconnectProvider

  • Cumulative Update 1 for SQL Server 2014

    Microsoft has released Cumulative Update #1 for SQL Server 2014. Relevant for @@VERSION 12.0.2000 through 12.0.2341
    http://support.microsoft.com/kb/2931693/en
    [Personal Site] [Blog] [Facebook]

    Shanky,  I did not want to write clearly in the forum, what I think if there are dozens of fixes at bug's level like fails, error messages, crashes, etc.., about three weeks after the release of the production version. but I wrote about it few words
    at facebook Israeli SQL Server User Group. In short.. It's realy look bad in my opinion.
    [Personal Site] [Blog] [Facebook]

  • Cumulative Update 5 for Exchange Server 2013 (KB2936880)

    Hi,
    i have installed exchange server 2013 on separate servers, I deployed the Mailbox role on the first server, and the CAS role on the second server.
    I checked the edition using the exchange management shell on the mailbox server and on the CAS server:
    >>>
    [PS] C:\Windows\system32>Get-ExchangeServer | fl name,edition,admindisplayversion
    Name                : EXMBX
    Edition             : Standard
    AdminDisplayVersion : Version 15.0 (Build 516.32)
    Name                : EXCAS
    Edition             : Standard
    AdminDisplayVersion : Version 15.0 (Build 516.32)
    <<<
    My question is, is it possible to update this current edition to the "Cumulative update 5 for Exchange Server 2013 (KB293688) ?
    if it is, in my case, on which servers should i install this update ? on the Mailbox server ? or on the CAS server ?
    i appreciate you fast response,
    Thanks.

    Hello,
    It doesn't matter which build you choose: you should first update the mailbox role and then CAS. The best option is to have same version of all your Exchange servers (e.g. CU5).
    It is not necessary to install Exchange binaries on DC.
    Hope it helps,
    Adam
    www.codetwo.com
    If this post helps resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others
    find the answer faster.

Maybe you are looking for