Server will only serve up one domain

I have a problem where only one domain will be served up from a list of several. Is this a known problem? Is there a way around it? Maybe set up separate ports?
It was all working normally until I tried to enable DAV. Suddenly I can't get the server to go to more than one site. What is wrong?

I think this is a bug. The GUI app refuses to take a nonvalue for the ServerAlias variable, so it assigns a default of wildcard (*). This is entirely messed up, because it means any request can be intercepted by the first domain with a wildcard ServerAlias.
I solved the problem by assigning a dummy value to the variable in every domain, and suddenly Server Admin behaves nicely.

Similar Messages

  • How to configure the mac mini to allow the clients to access both partitions...the client will only see the one we are logged into at the server???

    if possible??? how do we configure the mac mini to allow the clients to access both partitions...the client will only see the one we are logged into at the server???

    You have to explicitly share directories on external/secondary volumes.
    Use the Server admin app to configure file sharing, and select which directory/directories on the second drive you want to share, then they'll be available to clients.

  • I just found out my iPod touch will only sync to one library, what is the difference in technology of the iPod touch and iPod that makes this so?

    I just found out in iTunes help that my iPod touch will only sync to one library unlike iPod.  What is the difference in technology between the iPod touch and the iPod that makes this so?
    Thanks

    You can manage music and videos among different computers/libraries by following these instructions. You can only sync apps and photos from one library.
    Using iPhone, iPad, or iPod with multiple computers

  • My macmail will only send from one google impap gmail server

    Hi macmail mail will only load one outgoing GMAIL mail server. So I can load as many accounts as I want, receive mail in mac mail, but when i send mail it only comes from one of the outgoing gmail mail servers. The rest of the gmail mail servers show as being "offline."
    Has anyone had this problem and how did you fix it?

    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages

  • Ipad will only charge with one charger, not recognize by pc or itunes

    I have an Ipad 1. I bought a third party car charger to charge the ipad. I charged it with this charger one time. The next time I tried to charge the ipad with the original 10W wall outlet charger, it would not charge. I bought another apple ipad charger, thinking my original charger had quit working, it still would not charge. I plugged it back into the car charger and discovered that it will only charge on that particular charger. Now itunes nor my windows pc will recognize the ipad. I uninstalled itunes and installed the newest version. I also hard reset the ipad and now I have a worthless ipad that will not connect to itunes. Any suggestions?

    It's possible that charger damaged some part of the connection on the iPad. There's little metal contacts on that small silicon chip sticking out of the port and if something happens to one of those little contacts it can effect how it works.
    You can try taking it into an apple store and have them look at it. If you'd only used 'official' stuff there'd probably be no question but once they know that the damage, potential damage, was caused by a third party device, then it may be up to the discretion of the manager what they do with it. Whether they replace it under warranty or decide that the warranty is void (I honestly don't know how strict they can be with the use of third party devices and how they may/may not work)

  • IPhone will only sync to one CD in iTunes?

    I recently got an iPhone 5 and I'm new to the technology. I previously used an iPod with my iTunes library on home computer. But recently, I downloaded iTunes on my laptop because it was more convenient. I saved a CD of music on there and activated home sharing. But I never synced my iPod to it---I just listened to my music on my laptop. Now I have an iPhone. I have tried syncing it to my laptop, and it works for everything except for when it comes to music. It will only put my CD songs on it, even though on my laptop it shows that I have all my music. What do I need to do? Do I need to authorize my iPhone? Is that possible or is that just for comptuers? I already have 5 devices authorized (mysteriously enough as it is, but it's a shared computer so it makes sense) so would I need to deauthorize them all first?
    Thanks.

    Maybe you've got problems because of outlook artefacts after ugrading to Windows 8. You should delete them, reinstall iCloud control panel and after that it should work. A 'how to' can be found in the internet, e.g. on my homepage.

  • HT201250 My Time Capsule now will only back up one machine

    I have a home network and until yesterday all was working well with my back-ups through Time Machine onto my Time Capsule.  Now all of a sudden it's only backing up one machine and not the other, and none of my backups done previously on the second machine are showing.  How do I fix this???

    It means that there are bugs in Mavericks.
    The down and dirty fix:
    Make sure that no other Macs are backing up at the time
    Pull the power cord from the back of the Time Capsule
    Count to ten slowly
    Plug the power cord back into the back of the Time Capsule
    Wait a few minutes and try another backup
    Please report on your results
    Or, post back if want to try a bit more elegant "fix"

  • My powermac G5 will only print in one colour and black, how do i fix this?

    Please help...
    my mac is only printing in one colour - blue, and black. My partner's dyslexia tutor changed some settings "somewhere" as the black ink was running low and my partner had his finals coming up and didn't have time to get a new black cartridge. So his coursework printed in blue, to save black ink, but we can't get it back to normal to print any photo's etc. I remember seeing a colour wheel but don't know anymore ......

    Might have been an idea to tell us what printer this is.
    And to get some new cartridges.

  • Report 11gR1: multiple standalone Reports Server for one domain

    Hi all,
    In Oracle Froms, Report (11.1.1.6.0) environment is necessary to create more than one standalon Reports Server (iAS instances).
    1- How can we create multiple Reports Server (insatances) in same domain?
    2- How can use pro Reportsserver multiple engines (e.g. more than 3 engines)?
    Regards,
    Moh

    Hi Moh,
    Out of the box in 11g you get 1 standalone reports server (you can see this one via opmnctl status) and 1 in-process reports server than runs inside WLS_REPORTS managed server.
    You can create more standalone reports servers for your instance. Please follow the following support note
    Reference
    How Do You Create And Start Up A Standalone Reports Server In 11g R1 & R2? (Doc ID 961174.1)
    Regarding how to increase reports engines for each of your reports server you need to go to the Enterprise Manager console and select each of the reports servers you have and go to Reports --> Administration --> Basic menu and
    change " Maximum Engines" property for the value you need. You will need to re-start your Reports server after this.
    Hope this helps, Roberto

  • My time capsule will only work with one device at a time

    I just purchased the Airport time capsule.  I have it set up with my imac, but I also run a macbook air, older macbook, PC laptop, PC desktop, wii, xbox, and 3 iphones off of this device.  My issue is that my ISP does not serve more than 1 IP address and with previous routers, the IP address they recognized was only on my router.  Now, each time a new device tries to use the internet, my ISP is bypassing time capsule and recognizing the device IP address.  It's very frustratitng!  How do I set up my Time Capsule so that it's IP address is the only one my ISP recognizes, but all my devices are able to run off of the Time Capsule as the router.  (obviously I am not over educated in this area so solutions in simple language are greatly appreciated!) Thanks!

    I read the same solution somewhere else in the forum but it does not solve my problem.  When I set up the Airport, it sets up in bridge mode by default. When I contacted my ISP they said it needed to be in bridge mode (their rationale is that they only allow 1 IP address).  I just switched it to DHCP and NAT and this is what the default settings go to:
    After I update it with these settings my internet won't work at all and this is the error message I get:
    Any suggestions?
    My internet "Digis". www.digis.net.  They are a smaller company and put a dish on my roof.  The modem is very small, does not have a router.

  • Can someone explain to me why iTunes will only sync photos ONE WAY from my PC to my iPhone, and not vice versa?

    I have photos on my iPhone and want to put them on my PC.  Should be straightforward, right?
    So I go ahead and install iTunes, and plug in my phone, and sure enough iTunes tells me I've got 1610 photoes on my iPhone.  It won't let me actually SEE them, of course.  Fine (no, not really fine).  So I create a blank folder on my PC and proceed to do a sync.  My options are to (a) Sync FROM "My Pictures" to the phone, or (b) choose another and sync FROM my PC TO the phone. 
    Where is the option to sync FROM my phone TO my PC????
    It boggles my mind that I have to go outside of iTunes and use Windows Explorer to copy the photos from the phone to the computer.  So I go to "My Computer" and within the iphone Internal Storage there is only a DCIM folder and two sub-folders.  There are only 800 photos there!  Where are the other ones?
    Evidently what I can see from Windows Explorer is ONLY the pictures I took with the phone itself, and NOT the pictures I saved from email attachments or instant messages!  Why? Where are they and how can I access them???
    SO far, the closest thing I have been able to find is to have to buy a third party App like "Simple Transfer" to do this.  Is this really the case?  Or am I missing something?

    Photo sync is only one way, computer to iPhone.
    To get pictures from the iPhone to the computer, copy them to the computer as you would with any other device.
    Pictures saved from emails or instant messages (if done on the device) are in the camera roll.
    Pictures previously synced to the device from a computer are not available to be copied off the device.  They should already be on a computer.

  • IPod 2G playing music with shuffle will only repeat just one song

    When I start playing music on my iPod it will repeat just one song.

    Do you have the repeat feature turned on?  It is the racetrack-like icon on the left side of the screen below the scrubber bar.  Tap the icon to cycle through the variuos modes (off, repeat play list, repeat one song). Thus is covered in chapter 4 (Music) of the Users Guide.
    Apple - Support - Manuals

  • New Airport Extreme Base Station will only talk to one MacBook

    Thanks for any help you can give.
    I set up my new AEBS yesterday with my Core 2 Duo Macbook with the installer CD and the updater applied. It set up flawlessly, and once I deleted and reinstalled the USB printer that worked too.
    My wife's Macbook Core Duo (no 802.11n capability) will not see the AEBS via Airport. The installer CD and the updater have been applied. When I plug the MacBook into the AEBS with an ethernet cable it works fine and connects to the internet. When I unplug it and run the Airport Utility for the AEBS, it does not find the AEBS. The older Macbook will still see the neighbor's wireless network (which is how she is connected today).
    I know the AEBS is working because my Core 2 Duo Macbook is working fine. Why won't my other computer see it?
    I have restarted the Macbook several times. I have removed power from the AEBS several times. The "closed network" checkbox in the Airport Utility is not checked (that is, it is not set to closed network). I have reset the AEBS with a paper clip. I have followed the troubleshooting guides in the enclosed booklet and on the Apple Support forum. I have chosen "Other" in the Internet Connect menu and manually typed in the network name and the correct password.
    Any more ideas? I wonder if it has something to do with using the 802.11g link from the older Macbook in conjunction with the 802.11n link with the newer Macbook.
    Thanks again. Spongy II
    MacBook 2.0 GHZ Core 2 Duo Mac OS X (10.4.8)
    MacBook 2.0 GHZ Core 2 Duo   Mac OS X (10.4.8)  

    Glyn,
    Money!
    Thanks for the ideas. The 802.11b/g compatible setting was correct and I should have written that in my original post.
    The original channel was 11. I manually changed it to 6 and, lo and behold, the older MacBook could see the network.
    Thanks for the ideas and the help.
    Spongy II

  • Why will my concert will only play through one speaker?

    I have checked all of my connects and I get sound on both speakers on previously saved versions of my mainstage concert...just not on the one that I need!  It has to be an issue with the settings, but I can't seem to find anything.
    Please help!  Mainstage 3

    Ooops.  I'm an idiot, figured out that I had my master track panned to the right.  Sorry.  But now I can't figure out how to delete this question. 

  • Thunderbird will only open on one local folder. No other window, no access to accounts. Reinstalling doesn't help.

    I have 4 accounts and about 30 local folders. Thunderbird is stuck with one local folder open. Cannot access any other page, or any accounts. Reinstalling does not help, nor does restarting the computer. I have Thunderbird 31.5.0 on Yosemite 10.10.2.

    Turn your Folder Pane back on. View-Layout-Folder Pane if using the Menu Bar.
    If using the AppMenu button it is AppMenu button
    Hover over Options
    Layout-Folder Pane

Maybe you are looking for