Server won't finish booting...can't enter safe mode...won't read install

My G4 XServe starts to boot, I see the Apple, then it shifts to the Starting Mac.... screen, and then it just stops on an empty blue screen. I see the server going through and checking each of the four hard drives, system activity lights do their thing, but the blue screen remains.
I cannot get the server to boot from the install CD or DVD (using 10.4.8 and have the 10.4 disks). It will not let me set startup mode by holding down the system identifier button when powering up. I can't get it to accept holding down the C or D keys on the keyboard when starting. When I hold down the shift key it goes to the console and asks me to log in there instead of entering safe mode.
Any ideas or suggestions?

Are you able to start in Verbose mode?
Hold down "apple" and "v" at startup. This will take you through a logging bootup and into the GUI. Try and see if you can mount it to another machine via firewire disk mode. From there you can check it with Disk Utility or Diskwarrior (provided it mounts).
Or try start in single user mode "apple" and "s" and when you get to the prompt "#" type "fsck -f"
See if any volume repairs are conducted. If they complete or if it works you type "reboot" when done and the server should restart.
Good luck

Similar Messages

HT1338 I have macbook without a firewire port, I have usb 2.0 port, now my os is not working I can not get through apple logo loading , I can not enter safe mode, I can only enter one user mode, how can I backup my data, I have very important data in my h

I have macbook without a firewire port, I have usb 2.0 port, now my os is not working I can not get through apple logo loading , I can not enter safe mode, I can only enter one user mode, how can I backup my data, I have very important data in my hdd

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Can't enter safe mode in XP

Im5tryingtoenter safe mode on an older Toshiba Satellite A105 laptop, model no. PSAU-813000. I re had reinstalled the XP OS earlier this year and the computer appeared to run as new.however, I never tried safe mode after the installation. I'm trying to enter safe mode so I can eliminate the sign in password. As the computer is booting up I press f8repeatedly but it keeps booting up to the signin screen.. any ideas? Thanks.

If you can boot into Windows XP...
1. You can get into Safe Mode this way. Open the System Configuration Utility (msconfig.exe), check /SAFEBOOT on the BOOT.INI tab, OK, and restart Windows.
2. You can bypass the Welcome (Windows sign-in) screen this way. Open the hidden User Accounts dialog by running this..
control userpasswords2
On its Users tab, clear the check box for...
Users must enter a user name and password to use this computer.
You'll be asked for your password.
-Jerry

IMac shutting down on startup - Can't enter safe mode as wireless keyboard doesn't connect quickly enough

Hi all,
I was planning to use bootcamp to install Windows 7 on my mid-2010 21.5" iMac.
Bootcamp recommended I usk disk utility to repair the drive. I had a snow leopard install disk in the drive, (I didn't realise Lion already had it's recovery tools built in to the hard drive.)
Disk utility said it can't repair the drive and recommended I start backing up my data (because the hard drive could be about to fail). Fine, so I restarted, with the intention of backing up everything (all my work for the last 12 months). So I press the power button, grey screen comes up, then the apple logo, then a progress bar appears (found this odd at first, but later found out it has something to do with disk utility and a bad hard drive) it gets to around 20% and then all power is cut from the iMac and the hard drive stops/everything powers down.
Now, I can't seem to get my iMac to boot into recovery utilities or into safe mode because it doesn't connect to the wireless keyboard in time before it shuts down. So, if I use a wired keyboard (I have a dell USB keyboard that I can take from the office), will I be able to boot into safe mode?
Also, if the disk in drive is causing the problem, then I can't remove it because the wireless keyboard won't connect/register any keypresses.

Ok so, status report:
Wired keyboard is non responsive when I plug it in before/during boot. So i guess it needs to be plugged in before the iMac shut down. That's that out the window.
Plugged in headphones and I can't hear the startup chime so don't know when to start holding buttons.
To make matters worse, the wireless keyboard is no longer paired with the iMac, getting a green blinking light which indicates it wants to connect to a computer or device.
So I can't enter any commands whatsoever, can't remove the disk in the drive or boot safe mode. It's my worst nightmare.

My powerbook won't finish booting up

I installed some really general updates today- itunes, security, microsoft, and after it shut down I tried to start it up but it won't finish booting up. I get the chime, gray screen, apple logo, and spinning gear but it won't do anything else. I reset the PRAM but I'm afraid to do anything else due to my lack of computer knowledge. I recently upgraded to 10.4.1 and have run several software updates since and this is the first time I've ever had a problem.
Please help!!
Thanks so much :0)

Well I ran the OS X installation disk and repaired the disk and it came back "appears to be ok" but it still will not boot up- just gray screen, apple logo, and spinning gear. I also ran the hardware check disk and it came back "ok," too.
Please can anyone help? I'm desperate. I live over 4 hours away from the nearest mac store and I really need my powerbook for school.
Please, please, please any advice is helpful- I'm stumped.
Thanks :0)

Mac Pro gets stuck on the grey screen and won't finish booting

I have a Mac Pro 1, 1 recently (successfully) upgraded to snow leopard that gets stuck on the grey screen with the spinning rainbow cursor (after the apple logo and brief blue screen) and won't finish booting up. This happened after my computer froze up and I had to force quit. I checked out the forums and I tried all the all the suggestions (like disconnecting peripherals) and appropriate disk utilities, saw no errors with the HD reported, and had no trouble doing a safe boot (everything works o.k. there) or starting up from the software disk to perform the repairs. I did notice that during the repair permissions command, it gets stuck in the last few minutes, the CD starts to chug along, and everything freezes and I have to force quit. This happens every time I try it. I eventually backed everything up, erased the HD and reinstalled the OS, reset PRAM and NVRAM, but I'm still getting the grey screen on restart. Tech tool deluxe reports a "fail" on the video RAM, but everything else seems to check out. Could it be a graphics card issue? I did notice some funky visual glitches occurring prior to the breakdown. Any other ideas?

I wouldn't trust Apple Disk Utility to do a hard drive repair, but I would go with TechTool Pro 5/6 if you have that instead of Disk Warrior from Alsoft.
Clone the drive, though you should have some bootable backup clones already; repair the clone; then boot and work from that drive. Always have a working copy of the system.
And off load all your data to other drives.

G770 won't boot normally or in safe mode... I suspect it has something to do with the boot optimizer

My Lenovo G770 will not boot in normal or safe mode. I usually escape out of the boot optimizer. Today I let it run and it went to the "starting windows" screen with a brief startup of the windows 7 animation...it freezes for a second, then a quick flash of the bsod, then to the "windows error recovery page" giving me the option of "starting windows normally" or "Launch Startup Repair (recommended)."
Starting Windows Normally eventually brings me back to the same place repeating what I just stated above paragraph.
When I launch the Startup Repair it "Cannot repair this computer automatically".
So I go to view advanced options for system recovery and support.
It brings me to 5 options:
Startup Repair (we already tried this above)
System Restore (unfortunately I didn't create any restore points)
System Image Recovery (unfortunately I haven't created an image to recover)
Windows Memory Diagnostic (no problems found-done several times)
Command Prompt (don't know what I can do here except for remove a bad/corrupted driver which may be the problem, but I don't know the driver name that is associated with the boot optimizer...can anyone tell me this?)
I've tried booting to safe mode in all of its incarnations and I can't even do that..it repeats the same things as stated above...windows 7 animation briefly starts then locks up, flash of bsod, then the windows error recovery page.
I've tried booting to last known good configuration (same thing occurs...brief startup of windows 7 animation, freeze, flash of bsod, then error recovery page.
The only thing that has given me any kind of result was "disabling system restart on system failure." When I do this, the BSOD doesn't flash briefly..it stays. and it gives me the error message page_fault_in_nonpaged_area.
I'm at a loss as to what to do. Not being able to boot into Safe Mode even is really frustrating. Any advice from anyone? can I remove the driver associated with the boot optimizer? If so, what is the name of the driver and where (directory) is it located?

How did you resolve the issue?
I have the exactly same issue.
When I go System Image Recovery -->Select System Image-->Advanced->I can open all the drives [:Local Drive(C , LENOVO(D, Local Disk(E, Boot(X-where i think executable booting is here]. It comes with an Open prompt asking me to enter File Name with a File type: Setup Information.
I don't know which setup information and where to find it on my Drives.
Anyone know how to fix?
I was trying to re-install Win 7 from DVD but it is not executing either.
Can I boot with USB Ubuntu and Install Win 7 from there??? but how?
Need help?

Need old keyboard to boot off start-up disc or enter safe mode

I have one of the first Core Duo iMacs, purchased on July 2006. I have since replaced the original keyboard with the aluminum version that is now standard issue. Whenever I need to boot from the start-up disc to repair my hard disk, or enter safe mode, I always need to go back and plug in my original keyboard. Is there some known hardware compatibility issue with these older iMacs and the aluminum keyboards? I'm glad I still saved the old one.

Are you referring to the new bluetooth (wireless) keyboard or are you using a wired version?
Message was edited by: Barbara Daniels1

My imac won't startup past the spinning gear and my apple keyboard is wireless but it won't connect, how do I fix the problem so I can get into safe mode?

My imac won't startup past the spinning gear and my apple keyboard is wireless but it won't connect, how do I fix the problem so I can get into safe mode?
Can anybody help me on this issue? I have already tried to replace the batteries but since the computer won't get past the spinning wheel of death then the keyboard won't connect.

Please follow Apple's advice in http://support.apple.com/kb/TS2570. If you need to get your hands on a wired USB keyboard, even a PC one will work fine.
Do not follow the previous poster's advice, that option is a "last chance" option. OS X is stable and in most cases a reinstall is never needed. Follow the directions in Apple's letter.

My 2009 iMac gets stuck on the grey Apple logo when booting up. It boots correctly when in safe mode. I have tried erasing the HD and re-installing from a USB installer. It says the install is complete, but after restarting it gets stuck on the Apple log

My late 2009 27" iMac gets stuck on the grey Apple logo when booting up. It boots correctly when in safe mode. I have tried erasing the HD and re-installing from a USB installer. It says the install is complete, but after restarting it gets stuck on the Apple logo again. This could possibly be an HD failure, but then why does Safe Mode still work and the USB install not work? Any ideas?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1|head -1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

How can I use Safe Mode to troubleshoot in Windows 8 or Windows 7?

QuestionHow can I use Safe Mode to troubleshoot in Windows 8 or Windows 7?
AnswerWindows has a special mode known as Safe Mode. It is not fully functional, but it allows you to make changes to the laptop to hopefully fix normal mode. We're going to attempt to boot into Safe Mode to use it fix the laptop.
For more information on how to boot into Safe Mode please see the following articles:
How To: Safe Mode and other Advanced Startup Options in Windows 8
Creating a System Repair Disc for Windows 8 (useful for entering Safe Mode)
How To: Start your Windows 7 computer in Safe Mode
Use Safe Mode to undo recent changes
When a computer won't start Windows, it's usually due to a recent change. If you installed a new piece of software before your laptop began to have trouble booting, you may want to uninstall it. Similarly, if you recently made a change to any system settings, you may want to change it back. If you have antivirus software, you may want to perform a scan. If you're not sure what to do here, feel free to skip to the next step!
Use Safe Mode to perform a system restore
Windows includes a utility called System Restore that can help with many problems. While this won't alter or remove any of your personal files, it will roll back your system settings and files to an earlier date. We'll use this to attempt to fix Windows.
To learn how to use System Restore, please check the following articles:
How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
How To: Perform a system restore in Windows 7
Use Safe Mode to initiate a clean boot
As Windows loads, it loads many additional components such as services and startup items. Some of these are not vital. For example, some tools start immediately with Windows, such as antivirus software. From Safe Mode, we can instruct Windows not to load many of these. This will help you determine if one is causing Windows not to load properly. Note that this step is more advanced than the previous steps. If it seems difficult for you, you may consider asking for help from someone who is more comfortable with computers.
Please view the following article for more information:
How can I perform a clean startup without my startup items to troubleshoot a problem?
If Windows loads normally, you'll know one of those startup items or services was causing the problem. If this is the case, you may want to return to the System Configuration Utility and re-enable some items and services to determine which specific one caused the problem.
Backing up your data
If you're able to enter Safe Mode, backing up your data should be easy. Connect a USB flash drive or external drive to your computer while in Safe Mode and then copy your important files to the flash drive or external drive.
You may also want to consider taking your computer to a professional.

Would love to know if this is possible. Found forums dating back years asking exactly the same thing, no solutions. And I do not want to change my headset (Sennheiser MM-50), or use the onboard mic (which sounds like you are using your Mac in a wind tunnel once the fans kick in).

How do I enter Safe Mode on my Satellite U300?

Does anyone know how to enter safe mode on my u300. tried the usual F8 without success
Any Ideas?
Have got "The User Profile Service failed the logon." and was going to try system restore to resolve it.
Any help would be appreciatted.

Hi
You can enter the advanced boot menu only using the F8 button.
Did you try to press it several times in row?
You should press it immediately after the notebook has been powered up!
Sorry but other way is not known to me
You could try to boot using an Windows Vista disk.. this could help to repair the OS.
In worst case you have to reinstall the OS... :(

Macbook Pro 2009 has gray screen, safe mode won't work

I have a Macbook Pro 2009, with a new hard drive installed in August of 2013. I opened my computer a couple days ago to a gray screen with a prohibitory sign and a spinning gear that will not disappear. I have no backup and tried to backup my hard drive to an external drive in Recovery Mode, but I got an error message and the backup did not work: the image could not be created. So I decided to try Safe Mode, but the Macbook will not enter safe mode. Is there any way to get onto the computer just to backup a handful of files onto an external drive before I format my drive and start over? Am I doing something wrong by trying to enter safe mode? (I held down the Shift key after the chime and released it when the Apple logo and the gear appeared) Any help is appreciated. I've read all the topics in the forums I could find on this issue, but none of the directions seem to help. Thank you.

LisaLoParo,
no, you’re not doing anything wrong in trying to boot into Safe mode.
I can think of three possible alternatives to Safe mode to try:
If you have an external disk, you could boot from the grey Mac OS X Install DVD which came in the box with your MacBook Pro, and try copying files from your internal disk to the external disk;
If you have a bootable external disk, you could boot from it using Startup Manager, and try copying files from your internal disk to the external disk;
If you have access to a FireWire 800 cable and a second Mac with a FireWire 800 port, you could try booting your MacBook Pro into Target Disk mode so that it can be used as an external disk from the second Mac, and try copying files from your MacBook Pro to the second Mac.
You’d only need to try one of these three alternatives; if you try one of them and it doesn’t work, then you’d get the same result by trying either of the other two. Good luck.

G5 dual 2ghz. Been unplugged for a while. Powers up but no video or power to usb keyboard. Boots up fine in safe mode, restart into normal mode ok. After shutdown, back to same issue. What's happening?

G5 dual 2ghz. Been unplugged for a while. Powers up but no video or power to usb keyboard. Boots up fine in safe mode, restart into normal mode ok. After shutdown, back to same issue. What's happening?

I keep seeing people ask and the advice to replace if it has been unplugged, but really have nothing to confirm that from my experiences.
My experience is that a weak or dead battery can cause much more than date and time issues.
I have seen it time and time again.
Deal with used machines and you will quickly learn....
I'll give no "recipe" or set list of symptoms, but the range of irregularities that can occur make it a quick and easy first line of troubleshooting, especially when the machine has been off the mains for a few months.
Why fight mysterious maladies and troubleshoot with the knowledge that the PRAM battery is beyond it's useful life.
Maybe they recharge?
Not likely. They are chemically nasty, disposable, one way discharge batteries.
They aren't Lithium-ion batteries

Are my issues something I can repair in Safe Mode?

I just recently upgraded to Mavericks 10.9.2 - Since my upgrade, my Adobe no longer works, mail stops working and now my calendar stopped working. Are my issues something I can repair in Safe Mode?

Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder—not just its contents—to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Server won't finish booting...can't enter safe mode...won't read install

Similar Messages

Maybe you are looking for