Server won't stay hibernated after UPS instructs it to

Hi,
I have recently bought a UPS to power my Acer Altos G320, SBS 2003 DC/Server. However when the UPS commands the server to hibernate it starts back up again straight away. I have looked at the BIOS and cant seem to find anything that would be waking it up
again immediately. Not sure if it could be my Microsoft Exchange, LAN or Backup settings that could be causing it to stay awake. Or something else completely.

This is most often feature of faulty battery. If you have Warranty or AppleCare, make Genius reservation and take iPhone to Apple for resolution. If no Coverage, having battery replaced is first step in trouble shooting. Or take to Apple for free battery diagnostic testing, if battery is needed, they provide perfect replacement iPhone 4 exactly like yours for $79.

Similar Messages

IPhone 3gs WI-Fi won't stay connected after 6.1 update

I have a 3gs and the wi-fi connections have been working fine on iOS 5.1 etc. until I just updated to 6.1. Now it sees the networks that I normally connect to, but it won't connect unless I physically move closer to the source of the wi-fi signal in my office, ie. the Airport Extreme Router with the software update that just came out last week. I had this problem before and after I updated the router software. No problem previously. Its like the phone can't hold onto the wireless connection and either can't connect or won't stay connected. I've hard re-booted, and reset network settings, etc. No luck. What's the problem and the solution? Thanks.

valerie101 wrote:
Would like to know from Apple how long until this is fixed.
We're not Apple here, and you would have known that had you read the Terms of Use of this forum. Apple does not, and will not respon to posts here.
We are users here, just like you. We are volunteering our time to help others with technical support problems they may have.
If you would like technical support, please state your problem clearly, succinctly, without ranting and raving, and I'm sure there are many of us that would be more than happy to help you.

One of my apps won't stay open after iPad and app both had update

After updating with the new update for the iPad I updated my nook app. Now my nook app won't stay open. I've restarted my iPad multiple times and tried it with and without wifi still won't stay open.

I suggest trying the update again after an hour or two. Sometimes, the notice that an update is available comes an hour or two before the developers actually sends the revised app out to be downloaded.

Lion Server Won't Accept Password After New Motherboard Installed

We got a mac mini with Lion Server installed on it. The motherboard went bad so we took it back, and they put in the new motherboard. We couldn't log into the computer after that for some reason so we reinstalled it using the Time Machine backup we had (running from the other drive). Then we were able to log in using our admin password. Now the connecct to server won't work, even though we're trying to connect to ourselves, which should us the admin password. We deleted all the keychain passwords but to no avail.
Thoughts?

We had to reinstall the software (using cmd-r when booting up) and then reload everything. That fixed it.

Wifi won't stay connected after switching phone off and back on

This does not seem to be the apparently common problem of either dropping wi-fi signal OR losing wi-fi after the phone sleeps.
I have a 3GS. My wi-fi works fine all day while I'm around the house even with multiple sleep events. However, when I switch off my phone at night and then turn it back on again the next morning, the phone stays on 3G. If I go to the wi-fi settings, it shoes wi-fi is "on" and I can select my network and it will join it right away. It just doesn't rejoin automatically.
I am not certain about this, but I think this problem may have only started when I recently switched on the "ask to join networks" setting. I have tried turning this off but still the problem remains.
My wife's 3GS and my son's 4 both stay connected after a switch off and back on, and we are all using the same network.
If anyone has any suggestions I would be most appreciative. With three of us now sharing the cell data plan we are getting very close to the limit each month and want to maximize wi-fi usage.
Thanks.

SKAshanchi wrote:
From this article:
http://support.apple.com/kb/HT5883?viewlocale=en_US&locale=en_US
Note: Touch ID cannot be used for purchases if Require Password in Settings > General > Restrictions is set to Immediately.
I don't have any restrictions set on my phone at all.

Calendars won't stay merged after iOS 6.0 update on iphone 4s

I have multiple calendars and emails on my iphone 4s. Prior to my iOS6 update all calendars merged as one. since the update they won't stay merged. Same thing on my husband's 4s. Is it a setting that I'm missing or something else?

I still have no WiFi nor do I have Bluetooth capabilities on my iPhone 4S. I Tried to do a system restore and it's exactly the same as before. Could Apple please expedite an update to solve this WiFi issue? Maybe go back to how you had the WiFi working in iOS7??? It's cutting into my limited data plan and I'd appreciate it if I could use the product I paid for and not feel like I'm being scammed out of it for lack of a better term.

My iPad won't stay charged after iOS7 upgrade

Ever since I upgraded my iOS on my iPad 2 it won't stay charged and also takes forever to charge. Anyone else having this problem? I'm constantly closing everything that is open - super frustrating.

(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset

IPhone won't stay unlocked after official O2 Unlock...

As per a previous topic, I now have the official carrier unlock applied to my iPhone 3G (originally only on o2). Reason for requesting unlock is that I've gone abroad for a month.
I'm having some problems with the implementation of the unlock. The first time I put the Sim in, it requested the phone be connected to iTunes, which I duly did. The phone then appeared to be successfully unlocked - and indeed, a Vodaphone NZ sim worked fine.
However, when I put my phone into airplane mode, or swap to my O2 sim card and back to the Voda one, the phone then re-presents the "please connect to iTunes, different SIM installed" screen - and won't let me do anything until I do.
Anyone got any ideas on making this unlock actually stick on the device?

Thanks for the tips. Rebooting doesn't work, have tried that.
Restoring the iPhone - ahhh what a lovely process apple have come up with here... Given I'm abroad, web access is transient at best via wifi. And I can't use the data connection with my chosen NZ provider as the phone won't stay unlocked!
Is there a way to restore the phone WITHOUT a web connection? Itunes insists it must download the software - which is a 250MB download on a platform which doesn't support resumable downloads (What is this, 1998!?)
I'm loath to do a hard restore (Turn Off, Hold Home Button down for 10 seconds, incase this breaks the phone even more).
I'll definately be having words with my local apple store when I get back - I've never ever had this much trouble doing something as simple as an unlock before.

Curve 8520 - white screen, phone won't stay on after constant rebooting

My phone has been playing up for absolutely months because quite frankly I just don't think a Blackberry will ever NOT be faulty.
But basically the past week or so, the screen has been going white after some phone calls, in the middle of doing something on the phone or even when the battery reaches a certain point (usually when it has maybe about 2 and a half bars left).
Usually the screen would go black after this and if I put it on charge, it would reboot and the battery would be on red as if the phone had just died because of low battery.
But tonight has put me at my wit's end because AGAIN it gave me the white screen in the middle of a phone call, so I took out the battery and put it back in, it took 15 minutes to reboot, stayed on for about 30 seconds then turned off again. Then rebooted itself. And did the same. And this is a continuous cycle because it is rebooting itself for about the 12th time tonight. It won't let me do anything and it is absolutely infuriating. I have never been so angry at an inanimate object in my life.
Any ideas? I have a warranty so I can just get Orange to send me a replacement but it's so much hassle losing contacts and BBM contacts and such so I want to avoid having to replace it as much as possible.

emmer wrote:
For the last few days, right when I'm in the middle of something, the whole screen will go white and all buttons become unresponsive. My first thought was to do a battery pull which led me to the normal startup screen with the loading bar, however when the loading bar gets to around halfway, the phone powers off again. Won't switch on using the power button and battery pull just starts the same cycle again.
The first couple of times it happened, my battery had been quite low and I thought the power needed to boot up had just zapped what little power was left in the battery but last night my phone was on almost full charge and the same thing happened. The only way I can get the phone to then go on is if I plug it into my mains charger.
Hello emmer
Welcome to BlackBerry Support Forums
From what you described , my assumption is the problem is within your battery or the battery is too weak ! before going for a new battery I suggest if you can barrow or arrange a good fully charged BlackBerry battery then test it on your device. The test will reveal and let you know if the problem is within your battery or the device itself. If device works well well within a good battery then you can simply order a new battery which will fix your issue .
If problem remains then it's a device issue and for that you can try a OS reload which might fix this problem .
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Apple tv won't stay connected after yosemite upgrade

After upgrading to yosemite non of my apple tvs (3 of) will stay connected.
I have upgraded everything as of the 1/12/14 and still no joy.
I have a good wifi connection so its not that!
I have try connecting by playing through the computer to the apple tv and that also drops out!
I have restarted everything and that didn't help!
I have even setup the apple tv as new to see if that would help, nothing!
I have installed the latest upgrade for yosemite which is supposed to be for connection improvement, which doesn't work either as my mouse still keeps cutting out.
I have even tried changing computers and going through my macbook pro ( also running the latest yosemite) and that doesn't work!
Does any body have any other ideas on what i could try?
Please help
Dave

Not sure what instructions you are referring to, regardless wifi is susceptible to interference. If your neighbour's network is using the same channel or if yours is not encrypted that will of course cause issues, which is a result of the network not the Apple TV. There are also many other factors that can cause interference.
It is working just fine for me and most users, and if you took it to another network you would see similar results. If you wish to resolve then proper troubleshooting needs to occur

Battery won't stayed charged after latest update on iphone 4

I cannot get the battery on my iphone 4 to stayed charged. I charged it to 100% before going to bed by morning it was down to 35%. I had turned off automatic push services, made sure there were no open icons. I had spoken with an Apple rep that morning so he instructed me on what I should do. I've had the iphone 4 since January with no problems at all until I downloaded the latest update ....that's when all my problems with the battery began & my facetime freezes so bad I'm unable to use it & it worked great before the battery problems started.... the battery has lost all charge and I have recharged to 100 % several times and still will not hold charge......any information would be greatly appreciated...I'm so frustrated!!!

Please define "not working".

Won't turn on after UPS shutdown

I've got a APC UPS on my MacPro Server (Back-UPS XS 900). Monday we had a power outage, and the server shut down. It didn't come back up when the power was restored, even if in Energy Saver the preference is there.
This UPS was on a Linux Server prior to the MacPro, and the UPS Service on it turned the UPS down in the shutdown procedure. When the power went back, everything started again normally. Is there a way to do that with my setup or a way to make the server power on again?

Try resetting the SMC:
http://support.apple.com/kb/ht3964
If no success, make an appointment at an Apple store genius bar for a FREE evaluation.
ciao.

Finder View options, won't stay set after restart or log out

I like to have my application and utility folders (in the finder side bar) open in icon view and arranged by name and my Home and Movies folder open in list view with files arranged by name.
Each time i log out of my computor or restart the view options i have mentioned are reset, which is extreamly frustrating.
I have also noticed that the finder window now opens in a small size in the middle of the screen rather than being aligned to the left hand side as like to have it set.
This problem has only occoured recently, i think after deleting some "relic" files using Cleanapp.
Any ideas on how i can sort this out greatly appreciated

I finally know what causes folders to lose their view settings - even if you have set them to "Always open in..." a particular view (but I do not know how to fix it).
The trigger is setting any window to "column" view. Try it.
(1) Create a new folder, and set it to your preferred view (but not column view). Close the folder and re-open it to verify that it is in the view you have set. You can even set it to "Always open in..." that view, if you like (it doesn't matter).
(2) Now open up any other finder window or folder, and switch it to column view. If it is already in column view, switch it to some other view and then back to column view.
(3) Now go back to the folder you created in step 1 and open it. Presto: column view. (Aargh!)
I confirmed this with a helpful and sympathetic Apple support staffer at the Genius Bar in my local Apple Store. Unfortunately, he had no solution, but noted it as an apparent bug in the 10.7 finder.
This is an extremely reliable behavior, that I have confirmed on 5 different machines all running 10.7.2. It is also an extremely frustrating behavior that I hope Apple fixes soon.
-Barry
P.S. I will copy this to similar threads where this is being discussed, in hopes that it is helpful. Sometimes understanding why something happens can make it a little less frustrating, even if you don't know how to fix it.

Every time I reboot my computer, I lose Firefox. Safe mode window won't stay up, after a half hour or so, I usually find a way to open it, but what's causing it

When I reboot my computer, the Firefox icon is still sitting there, but will not open the program. I sometimes have luck opening from a link from another software program, but there is no logic. When I try to "Start/Run" firefox in safe mode, it still will not stay on the screen - just a brief flash. This is frustrating! This has been going on for at least a couple of months, help!

Thanks, that may be the problem ... I just have Windows Firewall, but have recently trialed Norton for about a month ... did not buy it, but it caused other issues with my computer, as well. I uninstalled it, but (for instance) my Flash kept crashing, etc.

Desktop Won't Stay Arranged (after upgrade to Tiger)

I just upgraded from 10.3.9 to 10.4.10, and all is perfect except for the desktop arrangement. The old 10.3 desktop was 4 columns of 36x36 icons arranged as "keep arranged by type". The new 10.4 desktop (also "keep arranged by type") is 3 columns of icons, with multiple icons stacked on the upper right corner icon. The icon stack happens because there are too few columns to hold all the icons.
The only way to get 4 columns again is to select "snap to grid" and drag & drop from the stack of icons to make another column. Nothing is arranged by type. If I select "keep arranged by type" then it reverts back to 3 columns with stacked icons in the upper right corner. This is totally different behavior than what I had with 10.3, and I can't seem to get back to 4 columns of icons arranged by type.
Any help would be appreciated.

zoapzuds:
Welcome to Apple Discussions.
I am not sure how you went about the installation, but something obviously did not go right. Here's what I suggest:
1. Repair Disk Permissions
While booted from your internal HDD
Go to (Applications > Utilities > Disk Utility.
Select your HDD (manufacturer ID) in left column and First Aid in main column.
Click Repair Disk Permissions at bottom left.
2. Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel, and report if it says anything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
3. If neither of the above make a difference download and install Mac OS X 10.4.11 Combo update (PPC). Then Repair Disk Permissions as in 1. above.
Please do post back with an update or further questions or comments.
Cheers
cornelius

Server won't stay hibernated after UPS instructs it to

Similar Messages

Maybe you are looking for