Server0 getting down and logon not possible ( error in license check)

Hi Guys,
I rebooted my SAP server and after that server0 is in disabled mode, well both the boxes seems to be green but the server0 node in disable mode as if it is maintained by some parameter and I have changed it, which is not the case, also there is no log with dev_server0 since then. I have followed 723909 note and also copied the parameters of a running server but didn't get success. Also when I am trying to login through SAPGUI its giving me error " Logon not possible( error in license check)" while the license is already installed.
dev_w0 log says
M Wed Sep 01 14:42:14 2010
M *** ERROR => sap license, no valid license found [likeyapi_w.c 2260]
M *** ERROR => wlikey_check_webas: There is a permanent license key for "NetWeaver_ADA" in the system but it has never been checked successfully. In this situation a temporary license key mustn't be installed. [sliclikey.c 1314]
M *** ERROR => The temporary license key for NetWeaver_ADA could not be installed [likeyapi_w.c 2305]
SAP ECC 6.0 release 700
DB: MaxDB
OS: Win2k3 server
Please help.
Regards
Mridul Gupta

License issue is resolved but server0 node is still in disable status while the instances shows green, I checked dev_jcontrol log and found :
[Thr 2168] [Node: server0] java home is set by profile parameter
     Java Home: C:\j2sdk1.4.2_25-x64
[Thr 2168] JStartupICheckFrameworkPackage: can't find framework package E:\usr\sap\W6Q\DVEBMGS12\exe\jvmx.jar
JStartupIReadSection: read node properties [ID123322550]
-> node name          : server0
-> node type          : server
-> node execute       : no
-> jlaunch parameters :
-> java path          : C:\j2sdk1.4.2_25-x64
I think the node execute sud be yes, I just wanted to know how I can enable this.
Regards,
Mridul Gupta

Similar Messages

"Logon Not Possible (Error in License Check)" at DR Site

Hi,
I am doing DR ( Disaster Recovery ) Site. I used Tivoli Storage Manager ( TSM ) to take FS Backup & DB Backup.
On the DR site I restore the same backup successfully and the resultant is I am able to run my SAP server.
When I try to connect through SAP Logon. it gives me first screen.
Problem none of the user is permitted to enter except sap*. for other user following message come.
"Logon Not Possible (Error in License Check)".
i know how to apply new license but in requesting permanent license the SAPnet is not asking hardware key.
Best Regards,
Syed Saifuddin
Software Architect ( JEE 5 )
SAP BASIS Administrator

Hi Syed,
Please check the SAP Note
Note 94998 - Requesting license keys and deleting systems.
Also check the sapms<sid> port.
Thanks,
Prabhat

CALL_FUNCTION_REMOTE_ERROR - Logon not possible (error in license check)

Hello,
We are getting the following dump in production system -SAP ECC 6.0.
The wp s are getting terminated automatically as shown in dev_disp file.
Sun Aug 10 12:15:38 2014
DpHdlDeadWp: W2 (pid=25722) terminated automatically
Sun Aug 10 12:16:46 2014
DpHdlDeadWp: W34 (pid=8081) terminated automatically
Sun Aug 10 12:23:45 2014
DpHdlDeadWp: W28 (pid=25734) terminated automatically
The dev_ms shows the following :
[Thr 139866179913568] Thu Aug 7 00:25:35 2014
[Thr 139866179913568] *** ERROR => MsSCheckConnections: no response from client C11 (161.134.204.144) after 300 secs received [msxxserv_mt. 4136]
[Thr 139866179913568] *** ERROR => MsSCheckConnections: disconnect now [161.134.204.144] [msxxserv_mt. 4140]
[Thr 139866179913568] Thu Aug 7 10:20:56 2014
[Thr 139866179913568] *** ERROR => MsSCheckConnections: no response from client C22 (144.145.30.11) after 300 secs received [msxxserv_mt. 4136]
[Thr 139866179913568] *** ERROR => MsSCheckConnections: disconnect now [144.145.30.11] [msxxserv_mt. 4140]
[Thr 139866179913568] Fri Aug 8 09:35:00 2014
[Thr 139866179913568] *** ERROR => MsSCheckConnections: no response from client C20 (139.24.138.145) after 300 secs received [msxxserv_mt. 4136]
[Thr 139866179913568] *** ERROR => MsSCheckConnections: disconnect now [139.24.138.145] [msxxserv_mt. 4140]
[Thr 139866179913568] Fri Aug 8 09:35:40 2014
[Thr 139866179913568] *** ERROR => MsSCheckConnections: no response from client C12 (139.24.138.145) after 300 secs received [msxxserv_mt. 4136]
[Thr 139866179913568] *** ERROR => MsSCheckConnections: disconnect now [139.24.138.145] [msxxserv_mt. 4140]
Last log on August 8.
What could be the reason?There are no licenses expiring..
Thanks and regards,
uday.

Hello,
The system is ECC 6.0
The dump details are as below :
Runtime Errors         CALL_FUNCTION_REMOTE_ERROR
Date and Time          10.08.2014 14:40:10
Short Text
     "Anmeldung nicht möglich (Fehler bei der Lizenzprüfung)"
What happened?
     Error in the ABAP Application Program
     The current ABAP program "/SIE/SAPLAD_Z0HBAPI_TRAVEL" had to be terminated
      because it has
     come across a statement that unfortunately cannot be executed.
     The error occurred during an RFC call to another system.
     In the target system, a short dump has been written as well.
     More detailed information on the error cause can be found there.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     An error occurred when executing a REMOTE FUNCTION CALL.
     It was logged under the name "Anmeldung nicht möglich (Fehler "
     on the called page.
How to correct the error
    Please refer to the notes described in the
    short dump.
System environment
    SAP-Release 700
    Application server...
    Network address......
    Operating system..... "Linux"
    Release.............. "3.0.93-0.8-default"
    Hardware type........ "x86_64"
    Character length.... 8 Bits
    Pointer length....... 64 Bits
    Work process number.. 13
    Shortdump setting.... "full"
    Database server...
    Database type..... "ORACLE"
    Database name.....
    Database user ID.. "SAPSR3"
    Terminal................. "portal"
    Char.set.... "de_DE.ISO-8859-1"
    SAP kernel....... 720
    created (date)... "Mar 8 2014 08:39:01"
    create on........ "Linux GNU SLES-9 x86_64 cc4.1.2 "
    Database version. "OCI_102, 11.2.0.4.0, V1, default"
    Patch level. 600
    Patch text.. " "
    Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"
    SAP database version. 720
Operating system..... "Linux 2.6, Linux 3"
Memory consumption
Roll.... 0
EM...... 2092720
Heap.... 0
Page.... 0
MM Used. 895296
MM Free. 1194848
and Transaction
Client.............. 101
User................ "CPIC_TILO"
Language Key........ "D"
Transaction......... " "
Transactions ID..... "53E7B3EC66796484E10000009DA38898"
Program............. "/SIE/SAPLAD_Z0HBAPI_TRAVEL"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "########"
Database Release.... 720
Kernel Release...... 720
Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchronous and non-transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........." "
Outbound Queue Name.." "
Client.............. "###"
User................ "############"
Transaction......... " "
Call Program........." "
Function Module..... "/SIE/AD_Z0H_BAPI_TRIP_MENU_EP"
Call Destination....
Source Server.......
Source IP Address... "
Additional information on RFC logon:
Trusted Relationship " "
Logon Return Code... 0
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
only partially available.
rmation on where terminated
Termination occurred in the ABAP program "/SIE/SAPLAD_Z0HBAPI_TRAVEL" - in
"/SIE/AD_Z0H_BAPI_TRIP_MENU_EP".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 164
of the (Include) program "/SIE/LAD_Z0HBAPI_TRAVELU09".
I am from level 1 and as per my knowledge there is no change done on the system recently.
Please guide further.
Regards,
uday.

Logon not possible (error in license check)

we did a system copy and then the temporary license expired. the permanent license which is installed on the system is valid for the original system so is not working. Due to the expired temporary license we cannot now get onto the system except using SAP*.
To fix the problem we need to delete the expired temporary license and invalid permanent licenses and apply a new license but SAP* is unable to delete old licenses so we cannot apply a new license.
the old OS command of saplicense -delete no longer works for new releases.
checked SAP Note 94998
checked SAP Note 917936
any ideas?

Hi Richard,
First of all OSS note 870871 clearly states that "If the SAP system is set up from a copy of an existing SAP system, you cannot install a temporary license if you did not have such a license before.
Before you work with a copied SAP system, request a license key."
Now that this issue has arisen I think you need to import support package SAPKB70007 as per the OSS note 917936.
Better still raise this issue with SAP as well.
Regards.
Ruchit.
Message was edited by:
Ruchit Khushu

Logon not possible (error in license key)

dear sir
I had a temporary license which got expired yesterday. but i received the permanent license today
and i wanted to install it on the solution manager server, but when i 'am trying to log in ,it throws
an error at the bottom that " logon not possible (error in license key ) "
pl given a solution
thanks
john

Logon using SAP* in client 000.
Probably you need to maintain profile parameter login/no_automatic_user_sapstar = 0 and restart the system before you are able to logon with user SAP*

Sap license error--error is "login not possible (error in license check)u0094

Hi,
I we are not able to login in our IDES r/3 system, it is showing login not possible (error in license check), only sap* is able to login . I have already applied sap license that will
Expires on 31-12-9999, I have old license also it was expired on 07-02-1996 it is under red light, second one under green light. I tried to del old one but system says through sap* not possible, only sys admin will do..what I can do now..

Hi,
When your license expired you can only login to the system with SAP* user.When you are login using sap* and deleting old license you will get a popup with this message <b>SAP* WHEN THE VALID SYSTEM LICENSES HAS EXPIRED,ONLY THE SAP* CAN LOG ON TO THE SYSTEM.IN THIS CASE,IT WOULD BE DANGEROUS TO LICENSE
THIS IS WHY THE SAP* IS NEVER ALLOWED TO DELETE A LICENSE</b>
So can cannot delete the expired license with SAP*.If u want to delete means try to login with <b>dilog user</b> and go to slicense T-code.
Select the expired license in menu goto EDIT->Delet license(shift+f2)
kiran kumar.v

I have a prpblem in enabling webserver i get message labview webserver not running error 54 , i checked IIS Manager and www the services r running ok ..can anybody tell what might be error ,,,iam on labview 6.1 and win 2003 server.,

i have a problem in enabling webserver i get message labview webserver not running error 54 , i checked IIS Manager and www the services r running ok ..can anybody tell what might be error ,,,iam on labview 6.1 and win 2003 server.,

If you already have IIS web server running, you need to run the LabVIEW web server on a different port to avoid conflicts. It probably won't start because the port 80 is already in use.
Check options.."Web Server: Configuration" within LabVIEW.
LabVIEW Champion . Do more with less code and in less time .

N4S Test Drive New License not Allowing Logon (error in license check)

I reinstalled my N4S testdrive after a NIC failure caused all sorts of problems - the demo license had expired, so I requested and received a new demo license from SAP.
I've installed the license via SLICENSE, and the license is showing as successfully installed, and has the green light next to it. However, I can only logon as SAP* - none of the other created users can logon - the error message on client 001 is:
Logon not possible (error in license check).
I've reinstalled the license, but this hasn't helped. I'm wondering if there is something still on my system pointing to the old expired license. Has anyone come across this before or have any ideas?
Many thanks.

Hi,
i had same problem and on tr "\nslicense", on tab "Digitally-Signed licenses", on the left of message "A valid license key is required to operate this system" , there's the name of product (of course).
If you request your license key on http://service.sap.com/sap/bc/bsp/spn/minisap/minisap.htm there are various system Ids with the same name.
In my product "NetWeaver_ADA" the correct license is the second of three products with name "NPL - SAP NetWeaver 7.02" . When you receive your license via mail you have to find "SWPRODUCTNAME=" , in my case i found "SWPRODUCTNAME=NetWeaver_ADA" because that's my product.
Hi have requested 3 licenses and lost 4 hours,
regards

Error in license check on (what is supposed to be) the ABAP developer edition 7.02

I obtained (at least what I thought to be) the Developer Edition (7.02), the information for which gave the impression that it had a permanent license, but the license seems to have expired , and now I cannot log on: Status bar says Logon not possible (error in license check).
I've spent a diverting morning searching and even chatting with SAP about how to get running again (they suggested I re-install, which would not be a problem if it didn't take a whole freaking day to do).
Surely this is a known issue, but I can't find it.
What does one do with a piece of software that is supposedly never to expire but does?

Login with SAP* and enter transaction SLicense (there you can see information about license and validity).
There you can see an install button which opens a folder where the license should be (txt file sent from SAP by E-Mail after you entered the information in the websit formular which was mentioned above).
It should be the same mechanism for 7.02.
Cheers

Error in License check for IDES ECC 6.0

Hi All,
I am unable to log into our 800 client since yesterday, i am getting the foloowing error while trying to log in
"Logon not possible (error in license check)"
Before this we were getting a warning message that the license will expire in 10 days, so i deleted the old license and then it was ok for rest of the day.
But today we are not able to log in at all.
The new license that we applied at service market place is active and still we have this problem.
Can anyone please tell me how to solve this problem.
Its very urgent as our client has to go for their level two training.
Looking forward for a quick reply.
Thanks in advance
hunky

Hi,
If you keep getting license issues check that the hardware key, validity date, system name, installation number etc.. are right.
If you can't access the system is because theres something wrong with the license, I suggest you to request a new license and make sure all the details are spot on... then install the license. If this doesn't fix your problem... open an OSS to SAP.
Regards
Juan
Please reward with points if helpful

Error in License Check

Hi Friends ,
I am currently using SAP version 4.6c running on windows server 2003 and database running on SQL server.
All the users at my site are getting the below message while login to production
"Logon not possible Error in license check"
I have already check the sap license and it is still valid and has not expired.
Kindly help me out.
Regards
Gaurav

Hi,
Login to OS level as SIDadm user and give command saplicense -show.
check if every thing is ok or else post the output.
Regards
Ram

Error in license check while loging in practice version

Hi,
I have practice version of SAP BI in my laptop..today I tried to log on but it says
Logon Not possible (error in license check) can anyone please help me suggesting best thing to do to get the version back for practice ??
Thanks,
Sandhya

Its SAP BI 7.0 version and I am able to give the log in id and password system ..I made changes to the date...still I am getting this error
I am getting this ABAP Error after I have changed the datee...
Run Time Error : ZDATE_ILLEGAL_LOCTIME
Date and Time : 2005-10-07 03:39:22
Short Text :
Error in SAP kermnel
The current ABAP "SAPMSYST" program had to be terminated because the ABAP processor detected an internal system error.
Error Analysis :
The ABAP interpreter always determines the local time relative to the datebase time.
Can some one please help ?

Error in license check using SAP*

Dear All,
Even though we have deleted the SAP* password in DB level, I am unable to login R3 level
using SAP/Pass and with the parameter login/no_automatic_user_sap =0;
when i login to R3 level using SAP*/PASS , Errors is " LOGON not possible ( error in license check)
Could you please let me know , how can we rectify this error?
Thanks and Regards

Hi,
This Error will come if you have changed any port recently.
Most probable msserv_internal port will create problem.
Steps:
You need to check this on os level as you cant login to SAP.
1) Check start profile for parameter msserv_internal if its there comment it and restart SAP system
2) Check instance profile for parameter msserv_internal if its there comment it and restart SAP system.
3) Check default profile for parameter msserv_internal if its there comment it and restart SAP system.
update status once done!
Regards,
Gagan Deep Kaushal

I want to upgrade the software (currently I have Mac OS X 10.6.4) but when the mac is downloading the new version i get an error message and is not possible get the most updated software: Mac OS X 10.6.8 or either the most recent itunes why?!?!?!

I want to upgrade the software (currently I have Mac OS X 10.6.4) but when the mac is downloading the new version i get an error message and is not possible get the most updated software: Mac OS X 10.6.8 or either the most recent itunes why?!?!?!

Then you either have a network problem or a hardware problem or a corrupted hard drive. You might try:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
You can also try downloading from another computer on a different network connection.

Error - Logon not possible; none of the active logon procedures is possible

Dear Gurus,
I'm trying to configure SSL with User mapping to SICF service: NWBC.
-SSL configured with STRUST transaction and I see that it is working via Internet Explorer
-SICF service NWBC was set to: "Required with Client Certificate (SSL)"
-User mapping was set like described in this article: https://help.sap.com/saphelp_nwmobile71/helpdata/en/17/1514e9b7eb4f74b0b49327b8f2a662/frameset.htm
But I get error:
Logon not possible; none of the active logon procedures is possible
Any idea ?
Please advise,
Dimitry Haritonov

Hi,
I would try to check logs first. In transaction SMICM you can set up level of logging for ICF services. So set it up to the highest possible level (this one actually dumps whole content of HTTP request, so maybe that's not necessary) and try logon again. You should get a reasonable info and you can try to figure out why it fails.
Cheers

Server0 getting down and logon not possible ( error in license check)

Similar Messages

Maybe you are looking for