Server0 not starting; ERROR = Can't open property file

Hi,
I have installed SAP EP 6.0 and it was working fine till yesterday.
But now when I am trying to open the Portal (http://hostname:50000/irj) it says Page cannot be displayed.
Also when I try to login to Visual Admin I get this error message:-
Unable to lookup connection Default http://sbdep:8101/msgserver/text/logon returned empty list of connection parameters
I restarted the EP instance (not rebooted) and the JC00 and SCS01 have started normally,but portal is till not UP.
Have found the following details in the logs:-
dev_jcontrol :-
[Thr 47609482135840] *** ERROR => Can't open property file [/usr/sap/EPD/JC00/SDM/program/config/sdm_jstartup.properties] [jstartxx_mt. 1952]
[Thr 47609482135840] *** ERROR => JStartupReadArgumentsEx: can't enumerate nodes [/usr/sap/EPD/JC00/j2ee/cluster/instance.properties:/usr/sap/EPD/JC00/SDM/program/config/sdm_jstartup.properties] (rc = -1) [jstartxx_mt. 524]
Kindly suggest where cud be the issue and how do I proceed.
Rgds,
Abhijeet

Hi,
- I think firstly, you need to ensure following files is restored or available as per location
1. instance.properties file
2. sdm_jstartup.properties file
and restart instance
- check if any profile changes
Regards,
Vincent

Similar Messages

AIR 16.0 Error: can't open -non_global_symbols_no_strip_list file: ......aot/lib/local_nostrip.arm-air.txt

When package app with the new AIR 16.0 build 245 and ANE, the following error occur.
ld: Error: can't open -non_global_symbols_no_strip_list file: ......aot/lib/local_nostrip.arm-air.txt

Hi DigiCrafts,
It seems you are doing something wrong at your end. I have used the swf and ane provided by you and I am able to create an ipa. For your reference I am pasting the command I Used.
~/archive_air_16.0_with_asc2_drm_sdk/bin/adt -package -target ipa-app-store -provisioning-profile <abcd.mobileprovision> -storetype pkcs12 -keystore <abcd.p12> -storepass <password> Temp.ipa app.xml ShipSim.swf -extdir /Users/abhisek/Downloads/ane-error/bin/

Error Can't open project file

Was working fine on a project. Closed the project tried to access it again got this error message.
Error Cant open project file: {0}
The project is there when I check in windows explorer. Can anyone help? I have a back up so I am able to continue working but I am concerned has to how this may have happened.
Regards
Betty

Hi Betty,
The application bean might have gotten saved inadvertantly with an unnoticed / unintended change after you copied the code from it. Its a slim chance but could have just happened. If by chance it was so, then the IDE would have had difficulty in recognizing the file as a result of which that error was thrown.
In case you are sure the file was not modified could you please provide us the steps to reproduce the problem.
Cheers
Giri :-)
Creator Team

I/O error--can't open FCP file

I have a Final Cut Pro project with video spread onto a few external hard drives. One of those drives seems to have gotten corrupted. I do have most of the materials backed up on another external drive (the corruption became apparent during a backup). My problem is that when I now try to open my FCP project I get an “I/O error” and cannot open.
I can open other projects.
Any suggestions on what I might try? Do I change the paths to my backup drive? If so, how do I do that?
Thanks

There are a couple of possibilities:
1. Your project file is corrupt.
2. Media linked to that project file has become corrupt.
Have you attempted to open an autosave of this particular project?

Suddenly getting "FIle not accesible" error coming when opening a file from time capsure drive, please hlep

I just logged on today after a week to my wifi network coming from apple time capsure and when trying to access time capsue data, it is showing "FIle not accessble". A;ll the files are showing "X" mark for each file type, any help regarding this is appreciated.
Thank you,
Narasimharao

Reboot the TC..
Open the airport utility in windows and make sure you have guest access turned on to read and write.
Also make sure you are in the correct workgroup and all network names meet SMB standard.. short, no spaces and pure alphanumeric.

Trying to start itunes - message appears "APSDAEMON.EXE MSVCR80.DLL is missing. Then another box indicates "Error 7 (Windows error 126). Itunes will not start. Can someone tell me what the problem is and how to fix?

when I tried to update to the new version of Itunes - message box appears "APSDAEMON.EXE MSVCR80.DLL is missing". Then another box indicates "Error 7 (Windows error 126)". Itunes will not start. Can someone tell me what the problem is and how to fix?

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

An error occurred while opening the file, you can not open this file because it does not page???

Dear all,
i am test the report to show "No Data Found" world, but, when i preview to PDF, i got the message :An error occurred while opening the file, you can not open this file because it does not page.
i try to load the other xml file that have data, and report work,no error.
i don't know where is the problem, so i need some help....
Thanks in advance for your response.
my rtf report:
<?call:header?>
<?if:count(PLAN_CODE)>0?>
<?for-each@section:G_PLAN_CODE?>
<?template:Header?>
<?for-each:G_PURPOSE?>
<?end for-each?>
<?end template?>
<?for-each:G_PLAN_SUBSQL2?>
<?end for-each?>
<?end for-each?>
<?end if?>
<?if:count(PLAN_CODE)=0?>
====================No Data Found ===================
<?end if?>
about xml:
if no data query back:
<?xml version="1.0"?>

<NARLGLR005>
<LIST_G_PLAN_CODE></LIST_G_PLAN_CODE>
<CF_START_DATE>102.3</CF_START_DATE>
<CF_END_DATE>102.3</CF_END_DATE>
<CF_TITLE_NAME>Company</CF_TITLE_NAME>
<CF_OU_NAME>IT Department</CF_OU_NAME>
<CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
<CF_PRINT_DATE>102.11.18 15:48:10</CF_PRINT_DATE>
</NARLGLR005>
if have data:
<?xml version="1.0"?>

<NARLGLR005>
<LIST_G_PLAN_CODE>
    <G_PLAN_CODE>
      <PLAN_CODE>03101C3003</PLAN_CODE>
      <PLAN_NAME>03101C3003_test</PLAN_NAME>
      <PLAN_EM>John</PLAN_EM>
      <PLAN_START_DATE>101.09.01</PLAN_START_DATE>
      <PLAN_END_DATE>102.08.31</PLAN_END_DATE>
      <PLAN_HOSTS>abc_super</PLAN_HOSTS>
      <LIST_G_PURPOSE>
        <G_PURPOSE>
          <PURPOSE_CODE>11600000</PURPOSE_CODE>
          <PURPOSE_NAME>Pre-Pay</PURPOSE_NAME>
          <LIST_G_PURPOSE_CODE>
            <G_PURPOSE_CODE>
              <BUDGET_AMOUNT>0</BUDGET_AMOUNT>
              <REAL_BUDGET_AMOUNT>0</REAL_BUDGET_AMOUNT>
              <TEMP_RECEIPT_AMOUNT>0</TEMP_RECEIPT_AMOUNT>
              <REAL_PAY_AMOUNT>0</REAL_PAY_AMOUNT>
              <TEMP_PAY_AMOUNT>-83006</TEMP_PAY_AMOUNT>
              <TEMP_PAY_FINAL_AMOUNT>83006</TEMP_PAY_FINAL_AMOUNT>
              <TOTAL_AMOUNT>83006</TOTAL_AMOUNT>
            </G_PURPOSE_CODE>
          </LIST_G_PURPOSE_CODE>
          <CS_BUDGET_AMOUNT>0</CS_BUDGET_AMOUNT>
          <CS_REAL_BUDGET_AMOUNT>0</CS_REAL_BUDGET_AMOUNT>
          <CS_TEMP_RECEIPT_AMOUNT>0</CS_TEMP_RECEIPT_AMOUNT>
          <CS_REAL_PAY_AMOUNT>0</CS_REAL_PAY_AMOUNT>
          <CS_TEMP_PAY_AMOUNT>0</CS_TEMP_PAY_AMOUNT>
          <CS_TEMP_PAY_FINAL_AMOUNT>0</CS_TEMP_PAY_FINAL_AMOUNT>
          <CS_TOTAL_AMOUNT>0</CS_TOTAL_AMOUNT>
        </G_PURPOSE>
      </LIST_G_PURPOSE>
      <LIST_G_PLAN_SUBSQL2>
        <G_PLAN_SUBSQL2>
          <GL_DATE>31-07-12</GL_DATE>
          <NARL_DOC_NUMBER>0310107311004</NARL_DOC_NUMBER>
          <AP_UNAPP></AP_UNAPP>
          <PLAN_NAME1>03101C3003_101-102</PLAN_NAME1>
          <PLAN_CODE1>03101C3003</PLAN_CODE1>
          <PLAN_EM1>Elly</PLAN_EM1>
          <PLAN_START_DATE1>2012/09/01 00:00:00</PLAN_START_DATE1>
          <PLAN_END_DATE1>2013/08/31 00:00:00</PLAN_END_DATE1>
          <PLAN_HOSTS1>KIC-Supp</PLAN_HOSTS1>
          <REAL_RECEIPT_AMOUNT>0</REAL_RECEIPT_AMOUNT>
          <DESCRIPTION>101 year</DESCRIPTION>
          <CF_GL_DATE>101.7.31</CF_GL_DATE>
        </G_PLAN_SUBSQL2>
      </LIST_G_PLAN_SUBSQL2>
      <CF_START_DATE1>99.1</CF_START_DATE1>
      <CF_END_DATE1>102.11</CF_END_DATE1>
      <CF_TITLE_NAME1>TCS Company</CF_TITLE_NAME1>
      <CF_OU_NAME1>IT Department</CF_OU_NAME1>
      <CF_SOURCE_CODE1>plan</CF_SOURCE_CODE1>
      <CF_PRINT_DATE1>102.11.19 17:12:19</CF_PRINT_DATE1>
      <CS_T_BUDGET_AMOUNT>517524</CS_T_BUDGET_AMOUNT>
      <CS_T_REAL_BUDGET_AMOUNT>517524</CS_T_REAL_BUDGET_AMOUNT>
      <CS_T_TEMP_RECEIPT_AMOUNT>289294</CS_T_TEMP_RECEIPT_AMOUNT>
      <CS_T_REAL_PAY_AMOUNT>289294</CS_T_REAL_PAY_AMOUNT>
      <CS_T_TEMP_PAY_AMOUNT>0</CS_T_TEMP_PAY_AMOUNT>
      <CS_T_TEMP_PAY_FINAL_AMOUNT>0</CS_T_TEMP_PAY_FINAL_AMOUNT>
      <CS_T_TOTAL_AMOUNT>228230</CS_T_TOTAL_AMOUNT>
      <CS_REAL_RECEIPT_AMOUNT>289294</CS_REAL_RECEIPT_AMOUNT>
    </G_PLAN_CODE>
</LIST_G_PLAN_CODE>
<CF_START_DATE>99.1</CF_START_DATE>
<CF_END_DATE>102.11</CF_END_DATE>
<CF_TITLE_NAME>Company</CF_TITLE_NAME>
<CF_OU_NAME>IT Department</CF_OU_NAME>
<CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
<CF_PRINT_DATE>102.11.18 15:48:10</CF_PRINT_DATE>
</NARLGLR005>

Hi,
You mentioned you tried some steps but I'm not sure what they are, you may try my suggestion to resolve this issue, follow these steps:
Click Start, right-click Computer, click
Properties, and then click Advanced system settings.
On the Advanced tab, click Environment Variables.
Locate and select the __COMPAT_LAYER variable, and then click Edit.
Set the value of the __COMPAT_LAYER variable to EnableThemes. Or, delete the __COMPAT_LAYER variable.
If the issue persists, we can troubleshoot this problem in Clean Boot to determine whether background programs are interfering with PowerPoint:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support

HT2041 I receive an error message when opening up a downloaded program as "Safari can't open the file because no availabel application can open it". Not sure what exactly this means or what I have to do!

I receive an error message when opening up a downloaded program "safari can't open the file because no available application can open it" I am not sure what I need to do to get these programs open!

What is the file?
Where did you get it from?
Allan

I can't open .pkg files. i get an error telling me to choose an application to open them. the Installer app is not in my Utilities folder or in System/Library/CoreServices.

i can't open .pkg files. i get an error telling me to choose an application to open them. the Installer app is not in my Utilities folder or in System/Library/CoreServices.

Install the UnArchiver and try again.
http://wakaba.c3.cx/s/apps/unarchiver
There is no Installer.app in the Utilities or Applications folder, there is one in the System/Library/CoreServices.
If yours is not there, then you need to:
1: Backup your data off the machine to a non-TimeMachine drive and disconnect all drives.
2: If you have TM, try to restore the Installer.app from the TM drive and reboot. See if things work.
If the above doesn't work, your going to have to re-install just OS X 10.6 (and bundled programs) from the disk by holding c and booting off the 10.6 disk and simply installing OS X. Then software updating to 10.6.8.
This will replace all bundled programs and OS X, not touch your files (backup regardless) and most third party programs.
Some third party programs will have to be reinstalled form original sources because they install Kext files into OS X and thus kicked out by the 10.6 reinstall form disk.
All should go well, however if you boot to a gray screen or other freeze, reboot holding the shift key down, then update all your third party software to be current to 10.6.8.
Another method is to re-install in to CoreServices the Installer.app from the 10.6 disk using the extraction program called Pacifist from CharleSoft, then running software update to get any updates for Installer.app.
http://www.charlessoft.com/

Xterm: Xt error: Can't open display: xterm: DISPLAY is not set

Hello, I am completely new to networking/systems. I have been asked to complete an open flow tutorial ( http://www.openflow.org/wk/index.php/OpenFlow_Tutorial ) I have fininshed a part of the tutorial and when i used "ssh -X [email protected]**.*", I was able to log in successfully but when i type in Xterm, it says "xterm: Xt error: Can't open display: xterm: DISPLAY is not set". I have downloaded virtual box, XQuartz and an ovf file as given in teh tutorial. I don't know what the problem is. Can someone please guide me through this? Thank you so much!

I didn't quite understand what you were saying but when i typed "ssh -Y ..." this is what happened:
mobile-172-16-103-167:~ mininet$ ssh -Y [email protected]
Password:
Last login: Sat May 18 20:25:50 2013 from 192.168.56.1
mobile-172-16-103-167:~ mininet$
ssh -X and ssh -Y do essentially the same thing. -Y is just less restrictive on X11 return traffic authority (basically it tells the local X11 display server that you trust the remote system sending X11 traffic to it).
Now what you are display seems strange. You prompt implies that your current system's IP address is 172.16.103.167 and you are ssh'ing to 192.168.56.1. You get a password prompt as expected, but then the "Last Login" messages says you are coming from 192.168.56.1, which is should be where you are coming, but that it the address you are trying to ssh to. And then to top it off, you command line prompt has not changed.
So I'm wondering if 192.168.56.1 is the same system you are currently using, but just a different account on that system?
Is this true?
Also your prompt implies you were logged into the 'mininet' account when you issued the ssh -Y command to login to the 'mininet' account on 192.168.56.1.
Or is it possible that you are loosing track of which system and account you are current remotely logged into?

I do not have Microsoft office and to know if I can still open docx files - error message reads corrupt files. Is there a reliable converter out there?

I do not have Microsoft office and want to know if I can still open docx files - error message reads corrupt files. Is there a reliable converter out there? I am a new mac user.

Install the free LibreOffice and save a bundle not having to pay MS. http://www.libreoffice.org/

X11 remote app and XQuartz and xterm Xt error: Can't open display: %s

Hi
I have Snow Leopard (10.8.4) and XQuartz on it I need to run X11 remote app on redhat.
On local host echo $DISPLAY shows /tmp/launch-d33HNb/org.macosforge.xquartz:0
When i do ssh -X (or -Y) [email protected] and try to run xterm i got:
xterm Xt error: Can't open display: %s
xterm: DISPLAY is not set
the sshd_config on remote host has
cat /etc/ssh/sshd_config | grep X11
#X11Forwarding no
X11Forwarding yes
X11DisplayOffset 10
#X11UseLocalhost yes
Question is do i need to set up DISPLAY variable on remote host?
If yes which display number do i choose?
if i do export DISPLAY=<my mac ip>:10.0 or export DISPLAY=<my mac ip>:0.0
i still have message xterm Xt error: Can't open display: %s
Maybe this will help also
ssh -v -v -Y [email protected]
OpenSSH_5.9p1, OpenSSL 0.9.8x 10 May 2012
debug1: Reading configuration data /etc/ssh_config
debug1: /etc/ssh_config line 20: Applying options for *
debug1: /etc/ssh_config line 53: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to 172.20.0.12 [172.20.0.12] port 22.
debug1: Connection established.
debug1: permanently_set_uid: 0/0
debug1: identity file /var/root/.ssh/id_rsa type -1
debug1: identity file /var/root/.ssh/id_rsa-cert type -1
debug1: identity file /var/root/.ssh/id_dsa type -1
debug1: identity file /var/root/.ssh/id_dsa-cert type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_4.3
debug1: match: OpenSSH_4.3 pat OpenSSH_4*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_5.9
debug2: fd 3 setting O_NONBLOCK
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie- hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: [email protected],[email protected],ssh-rsa,[email protected],[email protected],ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blow fish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blow fish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-g roup1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blow fish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blow fish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[email protected]
debug2: kex_parse_kexinit: none,[email protected]
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: found hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 none
debug2: mac_setup: found hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 110/256
debug2: bits set: 492/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Server host key: RSA 92:ac:c2:7b:1e:ba:6b:62:9b:32:3e:14:c6:87:a7:59
debug1: Host '172.20.0.12' is known and matches the RSA host key.
debug1: Found key in /var/root/.ssh/known_hosts:2
debug2: bits set: 524/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /var/root/.ssh/id_rsa (0x0)
debug2: key: /var/root/.ssh/id_dsa (0x0)
debug1: Authentications that can continue: publickey,gssapi-with-mic,password
debug1: Next authentication method: publickey
debug1: Trying private key: /var/root/.ssh/id_rsa
debug1: Trying private key: /var/root/.ssh/id_dsa
debug2: we did not send a packet, disable method
debug1: Next authentication method: password
[email protected]'s password:
debug2: we sent a password packet, wait for reply
debug1: Authentication succeeded (password).
Authenticated to 172.20.0.12 ([172.20.0.12]:22).
debug1: channel 0: new [client-session]
debug2: channel 0: send open
debug1: Entering interactive session.
debug2: callback start
debug2: client_session2_setup: id 0
debug2: fd 3 setting TCP_NODELAY
debug2: channel 0: request pty-req confirm 1
debug1: Sending environment.
debug2: channel 0: request shell confirm 1
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug2: channel_input_status_confirm: type 99 id 0
debug2: PTY allocation request accepted on channel 0
debug2: channel 0: rcvd adjust 2097152
debug2: channel_input_status_confirm: type 99 id 0
debug2: shell request accepted on channel 0
Last login: Thu Jun 6 09:12:43 2013 from 172.20.0.17
[root@npecdp01 ~]#

Jeffrey Jones2 wrote:
I'm always looking for new tricks of the trade.
I remember now why I originally changed the ssh config file. Here is another trick: In a text editor, type
ssh://[email protected]
making the obvious substitutions. Select the line and drag it to the Desktop. It will create an inetloc file that, when double-clicked, opens a Terminal window and connects to the ssh session. I have several of these in my Dock.
That is a neat trick. However, with LaunchPad I'm not much of a Finder double-clicker anymore. What is interesting is that the OS knows how to handle the ssh protocol. You can also type "open ssh://[email protected]" for the same effect. That may not seem like much of a gain, but it reveals some interesting OS-level possibilities.
With an RSA key, I don't even need a password
You can use the newer DSA keys. There is another neat trick too. Pretty much every set of instructions I've seen online suggests using an empty private key password because running ssh-agent is such a hassle on Linux. It is built-in to OS X. So, on OS X, you can create more secure DSA private keys with pass phrases that are stored (and encrypted) in your keychain. You only have to supply the Then, even if someone gets your private keys, they get nothing.

Error can't open display after reboot

Hi,
I encounter this problem :
I just install SSGD 4.2 on Solaris 10 01/06 T2000 server. After installation I can connect to the SSGD using browser from my notebook, and can try the various demo (dtterm, xclock etc)
I reboot the Solaris 10 OS.
After reboot I tried to login again via browser in my notebook and try to run the various demo.
I can login, but almost all the demo failed to execute, the X applications give error "can't open display:" with no hostname following the error.
The only demo still runs is the vt420 demo
Anybody can help me to point out what causes the problem ? I am trying to demo this SSGD software to a customer.
Regards
Adrianus B. Kurnadi

I've noticed this as well, under Solaris 10 FCS, Solaris 10 U1, and Solaris Express nv_39.
However, I have tried it out under S8 02/04, and S9 09/04 and I do not have this problem after rebooting the host at all.
For the hell of it, I (rather badly) converted the S89/S90 startup scripts to be SMF manifests with S90Tarantella having a dependancy on tS89TarantellaWebServer as I thought perhaps there was a strange issue with the tta process starting before the web service had fully started (beats me why it would matter, ends up it didn't) - as my test S10 host is a slow Netra T1.
I'd be interested to know what the difference is between it being started up via an rc2.d script and the root user logging into the system console running /opt/tarantella/bin/tarantella start. I haven't even bothered starting to try to observe the environment differences between startup via SMF in S10 and init.d in S8.
</2.2c>
Andrew

Updated safari to 6.0.2 app starts but can't open any pages...help!

updated safari to 6.0.2... app starts but can't open any pages...help!

I tried turning off extensions as you suggested, Bee, but the problem persists. As you can see Chrome is working. Turning on auto proxy discovery in preferences made no difference.
The message I get when trying to open a web page is:
Safari can't open the page "http:www.apple.com/support/". The error is: "The operation couldn't be completed. Operation not permitted" (NSPOSIXErrorDomain:1)
Any chance you can decipher this and tell me what it means other than the web page can't open which I kind of figured out.

Error message: "Dreamweaver can't open .jpg files"

I'm using DW 8, and I have installed the 8.0.2 update. I'm
having trouble inserting certain JPG images into a site. I get an
error message pop-up that states "Dreamweaver can't open .jpg
files". It will allow me to insert some jpg files, but not all of
them. I've tried drag & drop and going through the Insert menu.
The files are not large at all. Doesn't appear to be any problem
with png's or gif's. It's incredibly frustrating. Anyone have any
suggestions? TIA.

> why was i taught that all my web images need
> to be in 72dpi if it doesn't really matter?
most people suggest 72 because it was an old standard with
the early
macintosh DTP programs. For web use it's easier to
standardize on it because
when you make an image, you have to put ~some~ number in the
resolution box
and it might as well be 72 as any other number. It simplifies
moving image
files around in different applications if they are all the
same resolution.
For display in a browser, these will all have the same file
size and display
size in a web page:
600x600 pixels at 1dpi
600x600 pixels at 72dpi
600x600 pixels at 6000dpi
It's when they are used in other applications or when a
direct url like
/photos/1.jpg is printed out that they may display in the
resolution, not
the pixel dimension.
I came across a page once where the designer always saved his
images with a
resolution of 6000 dpi or some other odd number because he
thought that if
people dragged the image off the page to save it- most of
them wouldn't be
able to resize it. or some other idiot reason maybe.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Server0 not starting; ERROR = Can't open property file

Similar Messages

Maybe you are looking for