"Server0" of Java Stack exits with exit code '-11113' while starting...
Dear Experts,
kindly refer the below link & solve the java startup error.
The link is posted in
Expert Forums » Application Server » SAP NetWeaver AS, Java
Thread : Java Server) exits with exit code -11113
Link:
The answer will be suitable rewarded. Thanks.
Put the following parameters in the Java parameters list at all server nodes:
-Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
Reboot the cluster.
Kind regards,
Tsvetomir
Similar Messages
-
OutOfMemoryError! Node will exit with exit code 666
Hi,
I have a ECC 6.0 SR3 with Java add-in on Windows Server 2003(64 bit)/MS SQL 2005
Physical memory on server is 6.5GB and it has two processors.
Paging size on server is: 20480 MB
ABAP stack works perfectly fine, but while performing any task on the Java end it gives message u201CDispatcher running but no server connected!u201D
On examining the log I found following exception:
java.lang.OutOfMemoryError
OutOfMemoryError! Node will exit with exit code 666
Java parameters are set as:
-Xmx2048m
-Xms2048m
-XX:PermSize=2048m
-XX:MaxPermSize=2048m
-XX:NewSize=320m
-XX:MaxNewSize=320m
Can youu2019ll please advice on how to tweak the server to get rid of this error.
Thank you,
SAMGuys one question,
I have done this setting at the instance level,
I mean Config Tool -> cluster-data -> instance_IDXXX
Here in the sever general tab I have done the changes in Java parameters?
Is this the right place or should I be setting this parameter at the server level
I mean Config Tool -> cluster-data -> instance_IDXXX -> server_ID and then general tab at this node.
I tried doing the settings at the server node level and looks like it is working, let me monitor it for a while
Thanks,
SAM
Edited by: sam hennry on Sep 18, 2009 4:26 PM -
Error while running a OA framework Page Process exited with exit code 1.
Hi all,
I downloaded the Patch 4573517 from Metalink for JDEV with OA extension release 11i.I followed all the instruction of the setup init and installed the Jdev,also mytutorial pages got compiled successfully,but when i trie dto run the page
Run > Run test_fwktutorial.jsp from the main menu.
it gives me error.The error is as follows
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
C:\D drive\OA_2008\jdevbin\jdk\bin\javaw.exe -client -classpath C:\D drive\OA_2008\jdevbin\j2ee\home\oc4j.jar;C:\D drive\OA_2008\jdevbin\jdev\lib\jdev-oc4j.jar -Xbootclasspath/p:C:\D drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip -DFND_JDBC_STMT_CACHE_SIZE=200 -DCACHENODBINIT=true -DRUN_FROM_JDEV=true -mx256m -Doracle.j2ee.dont.use.memory.archive=false -Xverify:none -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 com.evermind.server.OC4JServer -config C:\D drive\OA_2008\jdevhome\jdev\system9.0.3.5.1437\oc4j-config\server.xml
[waiting for the server to complete its initialization...]
java.lang.NoClassDefFoundError: drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14/jar;C:\D
Exception in thread "main"
Process exited with exit code 1.
I am not understanding why it is going in exception.One reason which i doubthere is the line
java.lang.NoClassDefFoundError: drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14/jar;C:\D
here in this line the last word is ojdbc14/jar,i think it should have been ojdbc14.jar.
Can any body please help me out on how to correct this problem.Thanks
ManishManish,
You should ask on the OA Framework Forum.
john -
SAP on V6R1 - ABAP Import:Program 'Migration Monitor' exits with error code
Hello,
We are doing an installation of SAP NW 7.01 SR1 on V6R1.
<br>
We were getting error in SAPAPPL2.TSK.bck we merged the files with following command:R3load --merge_only <TSK file> and refering sap note:Note 455195 - R3load: Use of TSK files.
<br>
We are again getting error in following steps:
<br>
sapinst.log
<br>
<br>WARNING 2009-09-30 23:25:28.477
Execution of the command "Y:\QOpenSys\QIBM\ProdData\JavaVM\jdk14\64bit\bin\java -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 OS400 ppc64-64 j9ap64142sr13-20090310 (JIT enabled)
J9VM - 20090309_31291_BHdSMr
JIT - 20090210_1447ifx1_r8
GC - 200902_24)
I<br>mport Monitor jobs: running 1, waiting 27, completed 0, failed 0, total 28.
<br>Loading of 'SAPNTAB' import package: OK
<br>Import Monitor jobs: running 0, waiting 27, completed 1, failed 0, total 28.
Import Monitor jobs: running 1, waiting 26, completed 1, failed 0, total 28.<br>
Import Monitor jobs: running 2, waiting 25, completed 1, failed 0, total 28.<br>
Import Monitor jobs: running 3, waiting 24, completed 1, failed 0, total 28.<br>
Loading of 'DOKCLU' import package: OK
Import Monitor jobs: running 2, waiting 24, completed 2, failed 0, total 28.<br>
Import Monitor jobs: running 3, waiting 23, completed 2, failed 0, total 28.<br>
Loading of 'SAPAPPL1' import package: OK
Import Monitor jobs: running 2, waiting 23, completed 3, failed 0, total 28.<br>
Import Monitor jobs: running 3, waiting 22, completed 3, failed 0, total 28.<br>
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 2, waiting 22, completed 3, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 21, completed 3, failed 1, total 28.<br>
Loading of 'DD03L' import package: OK
Import Monitor jobs: running 2, waiting 21, completed 4, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 20, completed 4, failed 1, total 28.<br>
Loading of 'SCPRSVALS' import package: OK
Import Monitor jobs: running 2, waiting 20, completed 5, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 19, completed 5, failed 1, total 28.<br>
Loading of 'SAPSDIC' import package: OK
Import Monitor jobs: running 2, waiting 19, completed 6, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 18, completed 6, failed 1, total 28.<br>
Loading of 'SCPRVALS' import package: OK
Import Monitor jobs: running 2, waiting 18, completed 7, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 17, completed 7, failed 1, total 28.<br>
Loading of 'SAPSSRC' import package: OK
Import Monitor jobs: running 2, waiting 17, completed 8, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 16, completed 8, failed 1, total 28.<br>
Loading of 'FUPARAREF' import package: OK
Import Monitor jobs: running 2, waiting 16, completed 9, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 15, completed 9, failed 1, total 28.<br>
Loading of 'TODIR' import package: OK
Import Monitor jobs: running 2, waiting 15, completed 10, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 14, completed 10, failed 1, total 28.<br>
Loading of 'SEOSUBCODF' import package: OK
Import Monitor jobs: running 2, waiting 14, completed 11, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 13, completed 11, failed 1, total 28.<br>
Loading of 'E071K' import package: OK
Import Monitor jobs: running 2, waiting 13, completed 12, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 12, completed 12, failed 1, total 28.<br>
Loading of 'SAPPOOL' import package: OK
Import Monitor jobs: running 2, waiting 12, completed 13, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 11, completed 13, failed 1, total 28.<br>
Loading of 'SAPSPROT' import package: OK
Import Monitor jobs: running 2, waiting 11, completed 14, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 10, completed 14, failed 1, total 28.<br>
Loading of 'SAPSDOCU' import package: OK
Import Monitor jobs: running 2, waiting 10, completed 15, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 9, completed 15, failed 1, total 28.<br>
Loading of 'SAPCLUST' import package: OK
Import Monitor jobs: running 2, waiting 9, completed 16, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 8, completed 16, failed 1, total 28.<br>
Loading of 'SAPSLOAD' import package: OK
Import Monitor jobs: running 2, waiting 8, completed 17, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 7, completed 17, failed 1, total 28.<br>
Loading of 'SAPSLEXC' import package: OK
Import Monitor jobs: running 2, waiting 7, completed 18, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 6, completed 18, failed 1, total 28.<br>
Loading of 'SAPUSER' import package: OK
Import Monitor jobs: running 2, waiting 6, completed 19, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 5, completed 19, failed 1, total 28.<br>
Loading of 'SAPDDIM' import package: OK
Import Monitor jobs: running 2, waiting 5, completed 20, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 4, completed 20, failed 1, total 28.<br>
Loading of 'SAPDFACT' import package: OK
Import Monitor jobs: running 2, waiting 4, completed 21, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 3, completed 21, failed 1, total 28.<br>
Loading of 'SAPDODS' import package: OK
Import Monitor jobs: running 2, waiting 3, completed 22, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 2, completed 22, failed 1, total 28.<br>
Loading of 'SAPUSER1' import package: OK
Import Monitor jobs: running 2, waiting 2, completed 23, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 1, completed 23, failed 1, total 28.<br>
Loading of 'SAP0000' import package: OK
Import Monitor jobs: running 2, waiting 1, completed 24, failed 1, total 28.<br>
Loading of 'SAPAPPL0' import package: OK
Import Monitor jobs: running 1, waiting 1, completed 25, failed 1, total 28.<br>
Loading of 'SAPSSEXC' import package: OK
Import Monitor jobs: running 0, waiting 1, completed 26, failed 1, total 28.<br>
<br>
WARNING[E] 2009-09-30 23:25:28.524
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log,
<br>
ERROR 2009-09-30 23:25:28.914
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
<br>
<br>import_monitor.log.
<br>****************************************************************************************************************************************************
<br>INFO: 2009-09-30 23:26:33 com.sap.inst.migmon.LoadTask run
Loading of 'SAP0000' import package is successfully completed.
<br>
INFO: 2009-09-30 23:30:31 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is successfully completed.
<br>
INFO: 2009-09-30 23:31:16 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is successfully completed.
<br>
WARNING: 2009-09-30 23:31:31
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2009-09-30 23:31:31
1 error(s) during processing of packages.
INFO: 2009-09-30 23:31:31
Import Monitor is stopped.
<br>*************************************************************************************************************************************************
<br>SAPAPPL02.LOG
<br>**************************************************************************************************************************************************
<br>TVV1 in *LIBL type *FILE not found. MSGID= Job=015908/SAPINST/QJVAEXEC
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) INFO: TVV1 created #20091001110304
<br>
(DB) INFO: TVV1 deleted/truncated #20091001110304
<br>
(IMP) INFO: import of TVV1 completed (0 rows) #20091001110304
<br>
(DB) ERROR: DDL statement failed<br>
(ALTER TABLE "TVV1" DROP PRIMARY KEY )<br>
DbSlExecute: rc = 99<br>
(SQL error -539)<br>
error message returned by DbSl:
Table TVV1 in R3E04DATA does not have a primary or unique key. MSGID= Job=015908/SAPINST/QJVAEXEC
Your inputs will help a lot.
Regards,
PrasadHello,
We are doing an installation of SAP NW 7.01 SR1 on V6R1.
<br>
We were getting error in SAPAPPL2.TSK.bck we merged the files with following command:R3load --merge_only <TSK file> and refering sap note:Note 455195 - R3load: Use of TSK files.
<br>
We are again getting error in following steps:
<br>
sapinst.log
<br>
<br>WARNING 2009-09-30 23:25:28.477
Execution of the command "Y:\QOpenSys\QIBM\ProdData\JavaVM\jdk14\64bit\bin\java -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 OS400 ppc64-64 j9ap64142sr13-20090310 (JIT enabled)
J9VM - 20090309_31291_BHdSMr
JIT - 20090210_1447ifx1_r8
GC - 200902_24)
I<br>mport Monitor jobs: running 1, waiting 27, completed 0, failed 0, total 28.
<br>Loading of 'SAPNTAB' import package: OK
<br>Import Monitor jobs: running 0, waiting 27, completed 1, failed 0, total 28.
Import Monitor jobs: running 1, waiting 26, completed 1, failed 0, total 28.<br>
Import Monitor jobs: running 2, waiting 25, completed 1, failed 0, total 28.<br>
Import Monitor jobs: running 3, waiting 24, completed 1, failed 0, total 28.<br>
Loading of 'DOKCLU' import package: OK
Import Monitor jobs: running 2, waiting 24, completed 2, failed 0, total 28.<br>
Import Monitor jobs: running 3, waiting 23, completed 2, failed 0, total 28.<br>
Loading of 'SAPAPPL1' import package: OK
Import Monitor jobs: running 2, waiting 23, completed 3, failed 0, total 28.<br>
Import Monitor jobs: running 3, waiting 22, completed 3, failed 0, total 28.<br>
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 2, waiting 22, completed 3, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 21, completed 3, failed 1, total 28.<br>
Loading of 'DD03L' import package: OK
Import Monitor jobs: running 2, waiting 21, completed 4, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 20, completed 4, failed 1, total 28.<br>
Loading of 'SCPRSVALS' import package: OK
Import Monitor jobs: running 2, waiting 20, completed 5, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 19, completed 5, failed 1, total 28.<br>
Loading of 'SAPSDIC' import package: OK
Import Monitor jobs: running 2, waiting 19, completed 6, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 18, completed 6, failed 1, total 28.<br>
Loading of 'SCPRVALS' import package: OK
Import Monitor jobs: running 2, waiting 18, completed 7, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 17, completed 7, failed 1, total 28.<br>
Loading of 'SAPSSRC' import package: OK
Import Monitor jobs: running 2, waiting 17, completed 8, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 16, completed 8, failed 1, total 28.<br>
Loading of 'FUPARAREF' import package: OK
Import Monitor jobs: running 2, waiting 16, completed 9, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 15, completed 9, failed 1, total 28.<br>
Loading of 'TODIR' import package: OK
Import Monitor jobs: running 2, waiting 15, completed 10, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 14, completed 10, failed 1, total 28.<br>
Loading of 'SEOSUBCODF' import package: OK
Import Monitor jobs: running 2, waiting 14, completed 11, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 13, completed 11, failed 1, total 28.<br>
Loading of 'E071K' import package: OK
Import Monitor jobs: running 2, waiting 13, completed 12, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 12, completed 12, failed 1, total 28.<br>
Loading of 'SAPPOOL' import package: OK
Import Monitor jobs: running 2, waiting 12, completed 13, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 11, completed 13, failed 1, total 28.<br>
Loading of 'SAPSPROT' import package: OK
Import Monitor jobs: running 2, waiting 11, completed 14, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 10, completed 14, failed 1, total 28.<br>
Loading of 'SAPSDOCU' import package: OK
Import Monitor jobs: running 2, waiting 10, completed 15, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 9, completed 15, failed 1, total 28.<br>
Loading of 'SAPCLUST' import package: OK
Import Monitor jobs: running 2, waiting 9, completed 16, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 8, completed 16, failed 1, total 28.<br>
Loading of 'SAPSLOAD' import package: OK
Import Monitor jobs: running 2, waiting 8, completed 17, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 7, completed 17, failed 1, total 28.<br>
Loading of 'SAPSLEXC' import package: OK
Import Monitor jobs: running 2, waiting 7, completed 18, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 6, completed 18, failed 1, total 28.<br>
Loading of 'SAPUSER' import package: OK
Import Monitor jobs: running 2, waiting 6, completed 19, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 5, completed 19, failed 1, total 28.<br>
Loading of 'SAPDDIM' import package: OK
Import Monitor jobs: running 2, waiting 5, completed 20, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 4, completed 20, failed 1, total 28.<br>
Loading of 'SAPDFACT' import package: OK
Import Monitor jobs: running 2, waiting 4, completed 21, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 3, completed 21, failed 1, total 28.<br>
Loading of 'SAPDODS' import package: OK
Import Monitor jobs: running 2, waiting 3, completed 22, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 2, completed 22, failed 1, total 28.<br>
Loading of 'SAPUSER1' import package: OK
Import Monitor jobs: running 2, waiting 2, completed 23, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 1, completed 23, failed 1, total 28.<br>
Loading of 'SAP0000' import package: OK
Import Monitor jobs: running 2, waiting 1, completed 24, failed 1, total 28.<br>
Loading of 'SAPAPPL0' import package: OK
Import Monitor jobs: running 1, waiting 1, completed 25, failed 1, total 28.<br>
Loading of 'SAPSSEXC' import package: OK
Import Monitor jobs: running 0, waiting 1, completed 26, failed 1, total 28.<br>
<br>
WARNING[E] 2009-09-30 23:25:28.524
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log,
<br>
ERROR 2009-09-30 23:25:28.914
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
<br>
<br>import_monitor.log.
<br>****************************************************************************************************************************************************
<br>INFO: 2009-09-30 23:26:33 com.sap.inst.migmon.LoadTask run
Loading of 'SAP0000' import package is successfully completed.
<br>
INFO: 2009-09-30 23:30:31 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is successfully completed.
<br>
INFO: 2009-09-30 23:31:16 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is successfully completed.
<br>
WARNING: 2009-09-30 23:31:31
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2009-09-30 23:31:31
1 error(s) during processing of packages.
INFO: 2009-09-30 23:31:31
Import Monitor is stopped.
<br>*************************************************************************************************************************************************
<br>SAPAPPL02.LOG
<br>**************************************************************************************************************************************************
<br>TVV1 in *LIBL type *FILE not found. MSGID= Job=015908/SAPINST/QJVAEXEC
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) INFO: TVV1 created #20091001110304
<br>
(DB) INFO: TVV1 deleted/truncated #20091001110304
<br>
(IMP) INFO: import of TVV1 completed (0 rows) #20091001110304
<br>
(DB) ERROR: DDL statement failed<br>
(ALTER TABLE "TVV1" DROP PRIMARY KEY )<br>
DbSlExecute: rc = 99<br>
(SQL error -539)<br>
error message returned by DbSl:
Table TVV1 in R3E04DATA does not have a primary or unique key. MSGID= Job=015908/SAPINST/QJVAEXEC
Your inputs will help a lot.
Regards,
Prasad -
SAP ECC error:'Migration Monitor' exits with error code 103.
Hi All,
I am doing SAP ECC installation for windows 32 bit with MAXDB as backend.
I am stuck at the import ABAP.Getting error
ERROR 2008-08-08 16:10:53
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
1) imort_monitor.java.log-->contains
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 0, completed 18, failed 0, total 19.
Loading of 'SAPVIEW' import package: ERROR
Import Monitor jobs: running 0, waiting 0, completed 18, failed 1, total 19.
2)import_monitor.log
ERROR: 2008-08-08 16:10:36 com.sap.inst.migmon.LoadTask run
Loading of 'SAPVIEW' import package is interrupted with R3load error.
Process 'D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -nolog -c 0' exited with return code 2.
For mode details see 'SAPVIEW.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
INFO: 2008-08-08 16:10:52
All import packages are processed.
WARNING: 2008-08-08 16:10:52
1 error(s) during processing of packages.
INFO: 2008-08-08 16:10:52
Import Monitor is stopped.
3)SAPVIEW.log
error message returned by DbSl:
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
(CREATE VIEW "Z_T_CO_BW" ( "KOKRS" , "KOSTL" , "VERSN" , "KSTAR" , "WOG001" , "MEG001" ) AS SELECT T0002."KOKRS", T0002."KOSTL", T0001."VERSN", T0001."KSTAR", T0001."WOG001", T0001."MEG001" FROM "COSS" T0001, "CSKS" T0002 WHERE T0002."MANDT" = T0001."MANDT")
DbSlExecute: rc = 103
(SQL error -942)
error message returned by DbSl:
(DB) INFO: disconnected from DB
D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: job finished with 3108 error(s)
D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080808174211
Only SAPDB: SAPSID srvice of SAP DB is only up.
No other services of database are up.And i am not able to up the other services also.
Is it required to up the other services?
If not?
Why this error is occuring?
Any help will be appreciated.
Thanks&Regards
Manisha dasHello Manisha,
The one of the possible reasons for this is due to lack of H/W.
Increase your RAM size to atleast 2GB and utilise the same while you are installing ECC in database parameters step..
If the issue is with H/W, then this should fix the issue.
Hope it helps,
Regards,
Satish. -
[Error during Export] R3load exited with return code 11
Hi guys,
While performing and Unicode Migration, during Export Phase, Migration Monitor returned the following error while exporting a package
ERROR: 2014-06-01 10:57:44 com.sap.inst.migmon.LoadTask run
Unloading of 'REGUC' export package is interrupted with R3load error.
Process '/usr/sap/ECP/DVEBMGS00/exe/R3load -e REGUC.cmd -datacodepage 4102 -l REGUC.log -stop_on_error' exited with return code 11.
For mode details see 'REGUC.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
REGUC.log details:
(As you see, it does not provide reasons of this error, all messages are informative and alike all other Packages logs)
/usr/sap/ECP/DVEBMGS00/exe/R3load: START OF LOG: 20140601105052
/usr/sap/ECP/DVEBMGS00/exe/R3load: sccsid @(#) $Id: //bas/740_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
/usr/sap/ECP/DVEBMGS00/exe/R3load: version R7.40/V1.8
Compiled Jul 23 2013 21:30:53
/usr/sap/ECP/DVEBMGS00/exe/R3load -e REGUC.cmd -datacodepage 4102 -l REGUC.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 1160
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG = 500
(RSCP) INFO: init SUMG interface (3#$Revision: #1 $); package name: "REGUC".
(RSCP) INFO: "REGUC001.xml" created.
(GSI) INFO: dbname = "ECP20030615080638
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "ecp "
(GSI) INFO: sysname = "SunOS"
(GSI) INFO: nodename = "ecp"
(GSI) INFO: release = "5.10"
(GSI) INFO: version = "Generic_142900-13"
(GSI) INFO: machine = "sun4u"
Tried to find what does R3load Return Code 11 means, but I couldnt find further information on this.
Any hint of what is causing this error?
(Please disregard any Filesystem issues since all of them have available space)
Best!After using latest R3load patch, it provides furher information on the log file.
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.070) R3ldctl: fix CDS views creation in upgrade export mode (note 2
017805)
DBSL patchinfo (patches.h): (0.022) Smaller corrections in release 7.40 (th, dp, vmc, dpmon)
(note 1821404)
--------------------- End of patch information -------------------------
process id 27326
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 1160
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG = 500
(RSCP) INFO: init SUMG interface (3#$Revision: #1 $); package name: "REGUC".
(RSCP) INFO: "REGUC003.xml" created.
(GSI) INFO: dbname = "ECP20030615080638
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "ecp "
(GSI) INFO: sysname = "SunOS"
(GSI) INFO: nodename = "ecp"
(GSI) INFO: release = "5.10"
(GSI) INFO: version = "Generic_142900-13"
(GSI) INFO: machine = "sun4u"
(GSI) INFO: instno = "6120023288"
(RTF) ########## WARNING ###########
Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
(RDI) WARNING: /respaldo/ECP_Export/ABAP/DATA/REGUC.STR: cannot find version token "ver:" at line 1
(RDI) WARNING: /respaldo/ECP_Export/ABAP/DATA/REGUC.STR: unknown file format, assuming version 2
(EXP) INFO: table REGUC will be exported with sorting (task modifier)
------------------ C-STACK ----------------------
[0] t_splay ( 0x1020df850, 0xb3, 0x4386, 0x100a02078, 0x0, 0x1020df870 ), at 0xffffffff7b9629
94
[1] t_delete ( 0x1020df850, 0x4348, 0x1d9870, 0x1000d0408, 0xffffffff7bb3c000, 0x0 ), at 0xff
ffffff7b9627e4
[2] realfree ( 0x101ee7590, 0x1f82b1, 0x1d9cd0, 0x1f82b0, 0xffffffff7bb3c000, 0x101ee7590 ),
at 0xffffffff7b9623b0
[3] _malloc_unlocked ( 0x7d40, 0x200000, 0x101edf840, 0x0, 0x101ee7580, 0x0 ), at 0xffffffff7
b961eb4
[4] malloc ( 0x7d39, 0x2388, 0x1da428, 0x10038fe84, 0xffffffff7bb3c000, 0x2000 ), at 0xffffff
ff7b961c28
[5] rstg_get ( 0x2, 0x0, 0x2, 0x7d10, 0x0, 0x10077d8c0 ), at 0x10038ff4c
[6] c3_uc_new_cache ( 0x100a02078, 0x284db0, 0x284c00, 0x10077d8c0, 0x100a02108, 0xb3 ), at 0
x1000d1ce8
[7] c3_uc_seek_cache ( 0xb3, 0xff79, 0xffffffff7ffcae3e, 0x100a02078, 0x10189fa48, 0x10077d8c
0 ), at 0x1000d188c
[8] c3_uc_new_tabcache ( 0x0, 0xb3, 0x4386, 0x100a02078, 0xb3, 0x10077d8c0 ), at 0x1000d13fc
[9] c3_uc_insert_record_in_cache ( 0xffffffff7ffcb04e, 0x10189fa48, 0x100a02078, 0x100a024c8,
0xb3, 0x1058c8f84 ), at 0x1000d0408
[10] c3_uc_insert ( 0x0, 0x100a02078, 0x0, 0x0, 0x10077d8c0, 0xffffffff7ffcb04e ), at 0x1000c
f944
[11] c3_uc_convert_table_entry ( 0x1015c61f8, 0x0, 0x100a02078, 0x0, 0x10189f408, 0x31a000 ),
at 0x1000ce314
[12] c3_uc_convert_logic_table ( 0x1015c61f8, 0x100a02078, 0x0, 0x4a, 0x100638dc0, 0x10077d8c
0 ), at 0x1000cdb18
[13] c3_uc_convert_cluster_data ( 0x100a02078, 0xffffffff7ffcbc50, 0x1015c6428, 0x1015c61f8,
0x10077d8c0, 0x0 ), at 0x1000cd10c
[14] c3_uc_convert_cluster_item ( 0xffffffff7ffcbc78, 0xffffffff7ffcbc50, 0x100954770, 0x1038
6f6e0, 0xffffffff7ffcbb8c, 0x100a02812 ), at 0x1000be1d4
[15] process_task ( 0xffffffff7ffcbc78, 0xffffffff7ffcbc50, 0x100954770, 0x100a02810, 0x10063
32e0, 0x10077d8c0 ), at 0x1000b2f58
[16] CnvCluster ( 0x1014642d0, 0x100954670, 0x100aa9610, 0x2849b8, 0x284800, 0x6cb978 ), at 0
x1000b1f8c
[17] cnv_clust2 ( 0x100aa9580, 0xffffffff7ffcc258, 0x100954770, 0xfc0, 0x107d00, 0x100954670
), at 0x100062714
[18] cnv_cp ( 0x100aa9580, 0xffffffff7ffcc258, 0x100aa95e0, 0x0, 0x10077d8c0, 0x1d6c00 ), at
0x100064644
[19] process_buffer ( 0x100aa9580, 0xffffffff7ffcc258, 0xfff00, 0x100a97bd0, 0x10, 0x100aa95b
0 ), at 0x10007162c
[20] execute_table_unload ( 0xffffffff7ffed610, 0xffffffff7ffdc4b0, 0x0, 0x100aa9580, 0xfffff
fff7ffcc258, 0x10077d8c0 ), at 0x10006c488
[21] export_table_task ( 0xffffffff7ffed610, 0x0, 0xffffffff7ffdc368, 0xffffffff7ffcc330, 0xf
fffffff7ffeedb8, 0xffffffff7ffeec60 ), at 0x10006c934
[22] db_unload ( 0x100a97b0d, 0xffffffff7ffed610, 0x0, 0x10077d8c0, 0xffffffff7ffeec60, 0xfff
fffff7bb47540 ), at 0x10006d148
[23] main_r3ldmain ( 0x72ec00, 0xffffffff7ffff448, 0xffffffff7ffff228, 0xffffffff7bb47540, 0x
1005fc290, 0x0 ), at 0x1000514e0 -
Jdeveloper - Process exited with exit code 128.
Oracle,
I downloaded Jdeveloper from Oracle website. I tried to create simple helloworld jsp & tried to run from jdeveloper.
I set project properties->compiler->use Javac also, but still it gives same error message in "Running Embedded OC4j server Log"
In Messages tab
============
Compiling...
[1:04:07 PM] Successful compilation: 0 errors, 0 warnings.
In Running Embedded OC4j server Log
============================
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
**** Unable to obtain password from principals.xml. Using default.
C:\unzipped\jdevstudio1013\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\config>
C:\unzipped\jdevstudio1013\jdk\bin\javaw.exe -ojvm -classpath C:\unzipped\jdevstudio1013\j2ee\home\oc4j.jar;C:\unzipped\jdevstudio1013\jdev\lib\jdev-oc4j-embedded.jar -Dhttp.proxyHost=hoproxy.scif.com -Dhttp.proxyPort=8080 -Dhttp.nonProxyHosts=*.rapidscontrol.biz|ecf|10.*|*.scif.com|localhost|127.0.0.1 -Dhttps.proxyHost=hoproxy.scif.com -Dhttps.proxyPort=8080 -Dhttps.nonProxyHosts=*.rapidscontrol.biz|ecf|10.*|*.scif.com|localhost|127.0.0.1 -Xverify:none -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config C:\unzipped\jdevstudio1013\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\config\server.xml
[waiting for the server to complete its initialization...]
Process exited with exit code 128.
Please advise
Thanks
ChristyChristy,
what is the operation system you are running JDeveloper on ?
To further debug the problem, can you open a command line at <Jdeveloper Directory>\j2ee\home
(assuming Windows) type
..\..\jdk\bin\java oc4j.jar
provide an administration password when asked. This command starts the embedded OC4J as a stand-alone server and prints messages to the console window
Let us know if this gives more detailed error messages or if it starts up
Frank -
Process exited with exit code 128 using embedded OC4J (jdevsetudio1013)
I've just downloaded Oracle JDeveloper (10.1.3) - Production JAN 2006 version (Studio Edition), installied and configure as the install guide, downladed SU5 (Studio Edition version 10.1.3.0.4 Build JDEVADF_10.1.3_NT_060125.0900.3673) and JUnit extensions and SR. When I tried to run Oracle ADF SRDEMO Application, I´ve just got this error message:
[EJB 3.0]: Assigning default-data-source=jdbc/SRDemoDS, specified in projects EJB 3.0 properties
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
**** Unable to obtain password from principals.xml. Using default.
E:\mywork\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\config>
"C:\Program Files\Java\jdk1.5.0_08\bin\javaw.exe" -ojvm -classpath E:\jdevstudio1013\j2ee\home\oc4j.jar;E:\jdevstudio1013\jdev\lib\jdev-oc4j-embedded.jar -Xverify:none -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config E:\mywork\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\config\server.xml
[waiting for the server to complete its initialization...]
Process exited with exit code 128.
I'm using a Microsoft Windows Server 2003 Standard Edition Service Pack 1 inside a VMware workstation (version 5.5.2.build-29772) with 1.4GB of RAM with an Oracle 10gR2 for windows (10.2.0.1.0)
I don´t know if it is a configuration problem or that Windows Server 2003 SP1 is not supported or any other problem.
Any help you can give on this would be much appreciated.
Thanks,
Orlandothanks for your idea...but in my environment there no JAVA_OPTIONS defined. This is a copy of my console after running set:
ALLUSERSPROFILE=C:\Documents and Settings\All Users
ANT_HOME=C:\apache-ant-1.6.5
APPDATA=C:\Documents and Settings\Administrator\Application Data
APR_ICONV_PATH=C:\Program Files\Subversion\iconv
CATALINA_HOME=C:\ASF\Tomcat 5.5
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=OGJEE
ComSpec=C:\WINDOWS\system32\cmd.exe
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\Administrator
JAVA_HOME=C:\Program Files\Java\jdk1.5.0_08
JBOSS_HOME=C:\jboss-4.0.4.GA-Patch1
LOGONSERVER=\\OGJEE
M2_HOME=C:\ASF\maven-2.0.4
M2_REPO=C:\Documents and Settings\Administrator\.m2\repository
MAVEN_OPTS=-XX:MaxPermSize=128m -Xmx512m
NUMBER_OF_PROCESSORS=1
OS=Windows_NT
Path=E:\oracle\product\10.2.0\db_1\bin;C:\Program Files\Support Tools\;c:\Progra
m Files\Windows Resource Kits\Tools\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\S
ystem32\Wbem;;C:\Program Files\Subversion\bin;C:\Program Files\Java\jdk1.5.0_08\
bin;C:\ASF\maven-2.0.4\bin;C:\Program Files\MySQL\MySQLServer5.0\bin;C:\apache-a
nt-1.6.5\bin;;C:\Program Files\STI\bin\pc-win95
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PERL5LIB=E:\oracle\product\10.2.0\db_1\perl\5.8.3\lib\MSWin32-x86;E:\oracle\prod
uct\10.2.0\db_1\perl\5.8.3\lib;E:\oracle\product\10.2.0\db_1\perl\5.8.3\lib\MSWi
n32-x86;E:\oracle\product\10.2.0\db_1\perl\site\5.8.3;E:\oracle\product\10.2.0\d
b_1\perl\site\5.8.3\lib;E:\oracle\product\10.2.0\db_1\sysman\admin\scripts;
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 13 Stepping 8, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0d08
ProgramFiles=C:\Program Files
PROMPT=$P$G
SESSIONNAME=Console
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp
TMP=C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp
USERDOMAIN=OGJEE
USERNAME=localadmin
USERPROFILE=C:\Documents and Settings\Administrator
windir=C:\WINDOWS
tthanks anyway -
Process exited with exit code -1073741790 in jdeveloper
Hi,
When I try to run a simple Helloworld program in Jdeveloper, The compilation and all is fine, when I try to run it I got the error "Process exited with exit code -1073741790".
However I found one solution that, my computer is under a secured network, the Security Agent was seems stopping.
I changed the security level to LOW from MEDIUM , then its running fine.
Is there any other solution where I can work without reducing the security level.
While writing this post, I checked one more option of adding the jdeveloper.exe to trusted application in the Security agent. This seems resolved the application and working fine now.
-- KhaleelChristy,
what is the operation system you are running JDeveloper on ?
To further debug the problem, can you open a command line at <Jdeveloper Directory>\j2ee\home
(assuming Windows) type
..\..\jdk\bin\java oc4j.jar
provide an administration password when asked. This command starts the embedded OC4J as a stand-alone server and prints messages to the console window
Let us know if this gives more detailed error messages or if it starts up
Frank -
Process exited with exit code -1073741819+jdeveloper 9.0.5.1
Hi,
I am using JDeveloper 9.0.5.1 version.When i am compiling the java file it is compiling fine. But when I am running it it is throwing the error
Process exited with exit code -1073741819.
What is that error code means........?Hello,
It could mean that the cause is a StackOverflowError.
It could be that you are not running against your JDeveloper 9.0.5.1
embedded OC4J, but without noticing it, you are running your program
against another OC4J which would be incompatible!
May be you are running several JDevelopers on your machine, or
having a standalone OC4J and deployed your application against
such a different OC4J.
Try shutting down all the OC4J listeners on your machine, restart JDev
and run your java code again.
Hope this can help you.
Stephan -
SAP_ESS Track Caught OutOfMemoryError! Node will exit with exit code 666
Hi experts, please help me
I am creating track for SAP_ESS, however when I import the component to development environment , get this error :
Caught OutOfMemoryError! Node will exit with exit code 666
in defaulTrace.trc of cluster/server0 log
we try the next probably solutions :
1. Re: FATAL: Caught OutOfMemoryError! Node will exit with exit code 666
And my parameters in config tool are :
For instance :
-Xmx1024m
-Xms1024m
-XX:PermSize=256m
-XX:MaxPermSize=256m
-XX:NewSize=320m
-XX:MaxNewSize=320m
For server :
-XX:MaxPermSize=2048M
-XX:PermSize=2048M
-Xms1024M
-XX:NewSize=341M
-XX:MaxNewSize=341M
2. I revised the note 1001502, but we have SP 19 of DI DESIGN TIME REPOSITORY 7.00, However I change the parameter com.tssap.dtr.pvc.basics.sql.autobatchexec.maxbatchcount to 500 value.
3. The note 955082 is for SP 06 and 07 and our portal is :
SAP-JEE 7.00 SP19
SAP_ESS 600 SP14
the error persist.
Thanks in advance your help !!!Check following links too
[FATAL: Caught OutOfMemoryError! Node will exit with exit code 666;
[FATAL: Caught OutOfMemoryError! Node will exit with exit code 666;
[https://wiki.sdn.sap.com/wiki/display/JSTSG/(JSTSG)(Deploy)Problems-P19] -
3ab#SAPEngine_Application_Thread[impl:3]_39##0#0#Fatal#1#/System#Java###FATAL: Caught OutOfMemoryError! Node will exit with exit code 666
[EXCEPTION]
#1#java.lang.OutOfMemoryError
the server node keep on restarting pls adviceMathew have suggest me to check back the method that i have written...
at first , i just thinking it was the heap size problem..and the server settting ...
yup, mathew , you are right, i have code my application wrongly ..which result in this,
what a relief....
thanks for other opinion like setting jvm heap size and so on...
i will award good points for those who give good idea..to reveal the problem
Message was edited by:
yzme yzme -
RMAN Backup is failling with "RMAN exited with return code '1' " via tape.
Hi Everyone,
Backups are getting failed continously with below error.can you plese suggest me what is problem exactly
L1_OracleL1_Daily completed
Failed: ***-rac-a16-001-vip.*****.dom*
--- Unsuccessful Save Sets ---
** ***-rac-a16-001-vip.uidl1.dom:RMAN:/nsr/res/Daily_IncrDB_Backup savegrp: suppressed 43 lines of output.*
** ***-rac-a16-001-vip.uidl1.dom:RMAN:/nsr/res/Daily_IncrDB_Backup*
** ***-rac-a16-001-vip.uidl1.dom:RMAN:/nsr/res/Daily_IncrDB_Backup Recovery Manager complete.*
** ***1-rac-a16-001-vip.uidl1.dom:RMAN:/nsr/res/Daily_IncrDB_Backup The backup process failed:*
** ***1-rac-a16-001-vip.uidl1.dom:RMAN:/nsr/res/Daily_IncrDB_Backup RMAN exited with return code '1'.*
** ***1-rac-a16-001-vip.uidl1.dom:RMAN:/nsr/res/Daily_IncrDB_Backup Exiting with error:*
** ***1-rac-a16-001-vip.uidl1.dom:RMAN:/nsr/res/Daily_IncrDB_Backup RMAN exited with return code '1'.*
****-rac-a16-001-vip.uidl1.dom: RMAN exited with return code '1'.*
** ***1-rac-a16-001-vip.uidl1.dom:RMAN:/nsr/res/Daily_IncrDB_Backup*
** ***1-rac-a16-001-vip.uidl1.dom:RMAN:/nsr/res/Daily_IncrDB_Backup nsrnmostart returned status of 255*
** ***1-rac-a16-001-vip.uidl1.dom:RMAN:/nsr/res/Daily_IncrDB_Backup /usr/sbin/nsrnmobkp exiting.*
Thanks,
PrasanthHi Hemanth/imran,
storage team is shown below error for failure of backup in their log.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
ORA-12502: TNS:listener received no CONNECT_DATA from client
Recovery Manager complete.
The backup process failed:
RMAN exited with return code '1'.
Exiting with error:
RMAN exited with return code '1'.
uidl1-rac-a16-001-vip.uidl1.dom: RMAN exited with return code '1'.
Any changes we need to do
Thanks,
Prasanth -
Having a Kernal process running. Computer seems to run OK but fan which almost never runs is on continuously for the past 3 days.
7/4/11 7:31:21 AM com.apple.launchd[1] (edu.mit.Kerberos.krb5kdc[707]) Exited with exit code: 1
7/4/11 7:31:21 AM com.apple.launchd[1] (edu.mit.Kerberos.krb5kdc) Throttling respawn: Will start in 10 seconds
Just keeps going over and over.
Have different accounts but only seems to be occurring on one (primary) account.
I have rebooted multiple time, reset pram, disk utility permissions, quit a multitude of processes, even ran antivirus program.
Any suggestions??
Happy 4th, TIA
JuliusAs shown in the output of EtreCheck, that startup item is here:
Startup Items: ?
AgentMon: Path: /Library/StartupItems/AgentMon -
HELP!! Process exited with exit code 128.
Hi all,
I am using JDeveloper 10G to develop a struts project. I use the struts-tiles.tld to construct the layout.
<tiles:insert page="classicLayout.jsp" flush="true">
<tiles:put name="title" value="User and Assigned Role" />
<tiles:put name="header" value="menuTemplate.jsp" />
<tiles:put name="menu" value="TestPoint.jsp" />
<tiles:put name="body" value="ARM001800.jsp" />
<tiles:put name="footer" value="DebugPage.jsp" />
</tiles:insert>
However, when I run the project, then the OC4J Server terminated with this error code : Process exited with exit code 128.
What happen??
PS: I tried to remove the last 2 tags: body and footer. The Server did not terminate, but with some exceptions which related to tiles library.This type of error may occur because of developers mistake.
This error occurs when any function is called recursively in a loop.
The server calls the same function again and again in a loop and hence the server goes in infinite loop. This gives the error "Process exited with exit code 128".
You need to check your code thoroughly for such mistake.
Nital.
i-engineering.com
Maybe you are looking for
-
Is there a way to rotate screen shot pictures on the Mac book?
Is there a way to rotate screen shot pictures on the Mac book?
-
Ipod Touch 5g : 64G on IOS 8.1.1 Plug it into PC running Windows 7 Home Premium and Itunes 12.0.1.26 Syncing is SO slow. Ipod has 27G open on it and it still takes FOREVER to sync. I always get several error messages saying the ipod can't be read
-
Testing app on device shows only black screen.
Hi, I created hello world app, app is working fine on simulator, But when I install this app on device, and launch it from devie it shows only black screen. I am not sure whats the possible reason for this. Device which I am using is Intex cloud fx.
-
The maximum volume on my ipod is too low. When I am driving, I cannot hear it. When I use the car jack, I cannot hear it. How do I turn up the voume on the ipod so it can work? I don't have the same problem with my iphone, it works fine.
-
Where is the search music gone?
Can't find "Search music/Artists" in store Where?