Serverfarm Redirect Current Connections

We use a Serverfarm redirect for sites we require to use SSL. The rserver redirect is configured with variables for the hostname (%h) and uri (%p) as follows:
serverfarm redirect SSL
rserver SSL
inservice
rserver redirect SSL
webhost-redirection https://%h%p 302
inservice
That serverfarm is the default class for the load balancing policy for class maps using tcp port 80.
The problem is that the current connections for the serverfarm keep incrementing. My concern is that once this increments to 4,000,000 the serverfarm will no longer accept any connections.
I have cleared the connections to the serverfarm and that changes the total connections, but does nothing to the current connections.
Attached file has sho serverfarm SSL detail output.
Thanks in advance for any and all replies.

What version do you run ?
That sounds like a counter bug.
Do a show conn to verify if you have that amount of connections established or not.
If not, upgrade to the latest version as there were fixes in this area of the code.
If problem persists, open a service request with the TAC to report the problem,
Gilles.

Similar Messages

ACE Module uneven current connections

Good morning all,
I currently have an issue where using the round-robin predictor we are getting some servers being hit with larger numbers of connections than others. This is causing the web servers to drop connections due to being hit very fast in a short period of time.
This is the output from a show serverfarm showing the issue. MK-HOST15 somehow has 1858 current connections and 48 connection failures ....
MK-ACE01/001# show serverfarm MK-FARM-sf
serverfarm     : MK-FARM-sf, type: HOST
total rservers : 8
                                                ----------connections-----------
       real                  weight state        current    total      failures
   ---+---------------------+------+------------+----------+----------+---------
   rserver: MK-HOST10
       10.10.1.10:0          8      OPERATIONAL 92         206929     16
   rserver: MK-HOST11
       10.10.1.11:0          8      OPERATIONAL 93         206859     86
   rserver: MK-HOST12
       10.10.1.12:0          8      OPERATIONAL 93         206943     2
   rserver: MK-HOST13
       10.10.1.13:0          8      OPERATIONAL 116        206934     10
   rserver: MK-HOST14
       10.10.1.14:0          8      OPERATIONAL 93         206941     3
   rserver: MK-HOST15
       10.10.1.15:0          8      OPERATIONAL 1858       206896     48
   rserver: MK-HOST16
       10.10.1.16:0          8      OPERATIONAL 93         206935     9
   rserver: MK-HOST17
       10.10.1.17:0          8      OPERATIONAL 95         206838     106
When this happens the failure counter for MK-HOST15 increases a lot
MK-ACE01/001# show serverfarm MK-FARM-sf
serverfarm     : MK-FARM-sf, type: HOST
total rservers : 8
                                                ----------connections-----------
       real                  weight state        current    total      failures
   ---+---------------------+------+------------+----------+----------+---------
   rserver: MK-HOST10
       10.10.1.10:0          8      OPERATIONAL 229        345394     80
   rserver: MK-HOST11
       10.10.1.11:0          8      OPERATIONAL 216        345347     126
   rserver: MK-HOST12
       10.10.1.12:0          8      OPERATIONAL 210        345275     201
   rserver: MK-HOST13
       10.10.1.13:0          8      OPERATIONAL 669        345369     106
   rserver: MK-HOST14
       10.10.1.14:0          8      OPERATIONAL 210        345442     32
   rserver: MK-HOST15
       10.10.1.15:0          8      OPERATIONAL 203        345167     309
   rserver: MK-HOST16
       10.10.1.16:0          8      OPERATIONAL 228        345417     59
   rserver: MK-HOST17
       10.10.1.17:0          8      OPERATIONAL 256        345370     108
This behavior keeps occuring and I am not able to figure out why the current connections shows uneven numbers to such a large degree. The overall connection counters seem approximately even though.
We are running ACE Code A2(2.3)
The web servers are running Apache and keepalives are off inline with our production enviroments. TCP-Reuse is also turned off. There is no stickyness configured.
Any ideas why certain servers keep getting hit with more connections than others ? It's like roundrobin keeps stopping at a server for a second before moving on to the next one. Any suggestions appreciated.
Thanks.

Hello,
Have a look at the Configuring Real Server Rate Limiting section of the ACE documentation. I think this will meet your needs.
Hope this helps,
Sean

I have 2 iPhones - one for personal use and one for work. They are currently connected with the same Apple ID. I would like to separate the two accounts. Does anybody know how to do this?

I have 2 iPhones - one for personal use and one for work. They are currently connected with the same Apple ID. I would like to separate the two accounts. Does anybody know how to do this?

Just create a new AppleID for your work.
As Allan suggested, items purchased on one iTunes account cannot be moved to the other account.
However, you can put items purchased on on account onto the other iPhone.

Get current connection in Open Tools development(SDK)

Hi,
I'm developing an Open Tool(with the SDK) and I need to get the current connection(repository connection) to do some transactions.
I didn't find a way of getting the current connection but some existing tools are doing it(OdiExportAllScen, OdiExportLog, ...).
How can I do this ?
Thank you,
David
Edited by: 907730 on 2012-01-16 10:20
Added the SDK reference
Edited by: 907730 on 2012-01-17 08:10
Added "development(SDK)" in the title

Hi David,
Please go thru below link
http://gerardnico.com/doc/odi/webhelp/en/ref_tools/
Baove link list of all odiexport and other list few are listed for your reference
snpsexportjournal_.htm for OdiExportLog
snpsexportmaster.htm for OdiExportMaster
snpsexportobject for OdiExportObject
snpsexportscen for OdiExportScen
snpsexportallscen.htm for OdiExportAllScen
Hope this will give complete information in detail
Regards,
Phanikanth

EPM 10 NW Report showing error - No Current connection

Hi Team,
We are using EPM NW 10 Version SP 15 Patch 1.NET 4
When we Open the report from offline , The report is showing Error : " Error - No Current Connection"
And also some reports showing Value error , While opening the report in the offline . In this report we used EPM retrieve formula
This issue facing for one user machine
Please suggest whether we need to change settings in the user machine

Hi Andy,
No Offline Mode.
After refresh the EPM report , We saved the report locally in the desktop
The problem is User send this report to another user
So receiving user , When ever he opening that report , Its showing this Value error
He using the Excel 2010 Version
Please suggest

The transaction associated with the current connection has completed but has not been disposed. The transaction must be disposed before the connection can be used to execute SQL statements.

Hello All,
I am getting below error can you please help me
Error:-
The transaction associated with the current connection has completed but has not been disposed. The transaction must be disposed before the connection can be used to execute SQL statements.

Perhaps this thread will help you out
http://stackoverflow.com/questions/11453066/error-the-transaction-associated-with-the-current-connection-has-completed-but
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

I'm having trouble connecting to apps, itunes store, internet on my iPhone 5 running iOS 7.0.4. I am currently connected to a perfectly running WiFI connection. Why am I not able to connect anything? I've tried ALL the fixes suggested. HELP!!!!!!!!!

I'm having trouble connecting to apps, itunes store, internet on my iPhone 5 running iOS 7.0.4. I am currently connected to a perfectly running WiFI connection. This just started happening today (2/19/14)! Why am I not able to connect anything? I've tried ALL the fixes suggested. HELP!!!!!!!!! BTW, I know my Wi-Fi connection is good because I'm using it on my desktop and other people in my office are also connected on their iPhones and desktops. Again, HELP!!!!

You may not really be connected to your WiFi network.
Your router may not have given your iPhone a valid IP address. Go to Settings > Wifi > your network name and touch the "i" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPhone (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

My nook app continues to state "Please be sure you have internet connectivity, then try again." I am currently connected to wifi and it seems that all my other apps that need to be connect to the internet are properly working. Help!

My nook app keeps telling me "Please be sure you have internet connectivity, then try again." I am currently connected to wifi and it seems that all my other apps that need to be connect to the internet are properly working. I have turn off my phone, signed off my wifi, installed a new app, but nothing is working. My friend is having similar issues. My phone is up to date. I even tried taking off the wifi in hopes that it could just connect to the 3g but nothing. Not sure if anyone else is experiencieng this issue or knows what I can do. I think that it may be an app problem that needs fixed, but not sure. Help!

Maybe its a Viber problem. As that is not an Apple product, why don't you try and contact the developer?

Problem with Powerbook G4 - 15 inch, machine ins currently connected to the

Problem with Powerbook G4 - 15 inch, machine ins currently connected to the DVI/AVI adapter so I can use the powerbook with a monitor attached, and have been doing so for about 3 months so far, with no problems, now, it wont boot up without giving me the grey screen with the "please restart, hold done restart button for several seconds etc". I did the power management reset, take out battery - even though battery dead, and remove adapter, hold down button for 5 seconds etc... it worked, finally booted up, but the DVI/AVI monitor adapter stuff was not connected when it booted up. When i put them back on, and tried to restart, i get the same "please restart, hold done restart button for several seconds etc" what do you think could be happening, could it be the DVI/AVI adapter or something a lot more serious

Thanks and noted.
I'd suggest you post in the PowerBook G4 area. This forum is for
older, pre-G3 PowerBooks and so is probably not the
most likely place for you to get help with your G4.
Good luck.

Show Current Connected User in SQL Developer

Hello,
Is there a way to make SQL developer display the user that is currently connected?
For example, in the Connection tab, instead of just the database name show something
of the lines of "USER@DATABASE" or "DATABASE -- USER"
or in the SQL Worksheet Page?
Sometimes you connect and you don't know with which user you connected.
Thanks

We do have this listed in our task database with the other connection requests. These will not be addressed in the next update, but in a future release.
Regards
Sue

Current connections in a poo?l

Anyone know how to find out (programmatically) how many current connections are
being used?
I need to compare against the maxConnections allowed.
Thank you

Hi
You can use the JMX based monitoring..
for more info http://e-docs.bea.com/wls/docs61/jmx/monitoring.html#1105116
ssk
Manny wrote:
Anyone know how to find out (programmatically) how many current connections are
being used?
I need to compare against the maxConnections allowed.
Thank you

Most Recent Devices Not Currently Connected:

HI,
I'm getting error Most Recent Devices Not Currently Connected: in iTunes diagnostics for Device Connectivity Tests.
Device: iPhone 4
Laptop OS: Windows XP
iTunes: 10.5.3.3
I'm not able to restore iphone and it throws errors 1602 and 21 while restoring. I have completely removed and reinstalled iTunes before trying to restore.
My firewall/antivirus does not block any iphone/itunes service as I have used same PC before with the same iPhone.
Log is as follows:
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
TOSHIBA Portable PC
iTunes 10.5.3.3
QuickTime not available
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ACEC07B3B468
Current user is an administrator.
The current local date and time is 2012-01-30 20:41:48.
iTunes is not running in safe mode.
WebKit accelerated compositing is disabled.
HDCP is not supported.
Core Media is not supported. (16002)
Video Display Information
Mobile Intel(R) 945GM/GU Express Chipset Family
Mobile Intel(R) 945GM/GU Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Device Connectivity Tests ****
iPodService 10.5.3.3 is currently running.
iTunesHelper 10.5.3.3 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller
Standard Enhanced PCI to USB Host Controller
Standard OpenHCD USB Host Controller
Standard Enhanced PCI to USB Host Controller
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Texas Instruments OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
VIA OHCI Compliant IEEE 1394 Host Controller
Most Recent Devices Not Currently Connected:
iPhone 4 (GSM) running firmware version 5.0.1
Serial Number: xxxxxxxx (edit: removed for security)
Please help.
Regards,
Yogesh

Hi susanfromluling,
Welcome to the Apple Support Community!
It sounds like your iPod is not showing in iTunes when you connect it and that is what is not allowing you to sync. Please review the attached article to help you troubleshoot this connection.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
Cheers,
Joe

How do you detect url redirects when connecting to a URL

how do you detect url redirects when connecting to a URL?
Thanks in advance
stev

Hai
(i) If it a jsp we can get the URL by request object.
Like
String url = request.getHeader("Referer");
u can do it in Servlet aslo by request object variable.
If this explanation is not ok, Explain ur doubt in more briefed Manner

ACE: How does one probe "rservers redirect" in "serverfarm redirect"?

Probes can be used with serverfarms of type host
probe http WEB_SERVERS
interval 5
passdetect interval 10
passdetect count 2
request method get url /index.html   expect status 200 200
!--- Probe used to detect the status !--- of the servers in the serverfarm.
rserver host S1
ip address 192.168.0.200
inservice
rserver host S2
ip address 192.168.0.201
inservice
rserver host S3
ip address 192.168.0.202
inservice
rserver host S4
ip address 192.168.0.203
inservice
serverfarm host SF-1
probe WEB_SERVERS
rserver S1
   inservice
rserver S2
   inservice
rserver S3
   inservice
rserver S4
   inservice
When it comes to "serverfarm redirect" how would one emulate the probing to work as above. (When one is loadbalancing servers of type redirect, the probe command is not available for serverfarm redirect SF-2)
Its also not possible to mix reservers of type redirect with serverfarm of host. If it was possible, This would have answered my question, which is.
How does one emulate the probe functionality found in rsever host and serverfarm host in serverfarm redirect?

Probing a redirect server was supported on A2(3.2) or later.
So, you can use the probe configuration on 'serverfarm redirect', where 'ip address [ip_address] routed' option is required.
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/vA2_3_x/Release/Note/RACEA2_3_X.html#wp620109
Unfortunately, 'rserver host' and 'rserver redirect' cannot exist together in the same serverfarm since 'serverfarm host' is
for real server and 'serverfarm redirect' is for redirect rserver.
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/vA2_3_0/command/reference/config.html#wp1117844
When you use backup serverfarm as below, you can use both serverfarms. However, you cannot use primary serverfarm
and backup serverfarm at the same time.
policy-map type loadbalance first-match lb
class class-default
    serverfarm SF1 backup SF2
Regards,
Yuji

How to use the current connection when calling db procedure ?

dear all,
Am using Jdevleoper 11.1.1.3 ,
I have a java class that call a database procedure , now everything is going fine with me but a bit slow bcoz am openning a new connection I think it would be definitely faster if am using the current connection
so how can i re-write my code so i can use the current connection istead of defining a new connection to the DB :
public void DeleteApp (int PAppNo){
String username,password,thinConn;
username = "ACC";
password = "ACC";
thinConn = "jdbc:oracle:thin:@..."
try {
DriverManager.registerDriver(new OracleDriver());
Connection conn = DriverManager.getConnection(thinConn, username, password);
CallableStatement cs = conn.prepareCall(" { call myprocedure(?,?,?) } ");
cs.setInt(1,PAppNo);
Thanks for all,
Lama

Delta,
You shound NOT be doing JDBC calls from your UI project. You should put the code as a service method in your application module, expose the service method to the client, and then call it through the binding layer from your UI http://download.oracle.com/docs/cd/E14571_01/web.1111/b31974/bcservices.htm#sm0212
thx John & timo but u always post the same reply at the same time for my questionsTimo and I have been around long enough that we recognize the questions that have been posted 9,461,293,811 times before and know the stock answers, and know where in the documentation the answers are given. As you appear to be new to ADF, I'd strongly recommend reading the Fusion Developer's Guide (skim it once and then read in detail the parts that interest you). As I've said before, so many of the basic (and not-so-basic) concepts are covered in there. Once you've skimmed it in enough detail, then the next time you have a problem, you might not know the answer, but you'll remember, "ah, I think I read something about that before, let me check..."
John

Serverfarm Redirect Current Connections

Similar Messages

Maybe you are looking for