Servermgr functionality removed in Mavericks?

We use servermgr to provide info to InterMapper probes, to monitor and track server health. For some strange reason, since upgrading some machines to Mavericks, the cpuUsage and networkThroughput keys are no longer available under getHardwareInfo. I can't help but wonder if I'm doing something wrong, as omitting such useful values seems a bit bizarre, but I can't find them, or an equivalent, anywhere else.
Does anyone have any insight into this new behaviour, or even an idea of who I'd speak to at Apple about it?
Cheers,
Mike

Hi Mike,
Thanks for visiting Apple Support Communities.
You may want to contact Enterprise support at this number:
Before you call, have your serial number ready. Or start your support request online and we'll connect you to an expert.
Enterprise
1-866-752-7753
From:
Contact Apple for support and service
http://support.apple.com/kb/he57
You can also submit feedback about Mavericks Server here:
http://www.apple.com/feedback
Best,
Jeremy

Similar Messages

HT6114 My Mac Book Pro had a split drive with Windows Microsoft Access on it and it was removed when Mavericks installed. I need this so how can I go back to the old system?

My Mac Book Pro had a split drive with Windows Microsoft Access on it and it was removed when Mavericks installed. I need this so how can I go back to the old system?

Restore from the backup you had prior to installing Mavericks.
However, the upgrade should not have altered your partition scheme. Did your erase and format the drive prior to upgrading?

Error message "Product Recovery Function" removed

Greetings
Hi all........I am in a big trouble at this moment.I have installed OS XP which i am having from university. I am trying to reinstall my original Winxp using Rescue & Recovery 3.0. I repaired my MBR using MBR repair diskette and installed RnR 3.0. After that when i pressed F11 key it enters in rescue and recovery but when i click to bring my laptop to original factory state it gives me an error "Product Recovery Function removed from the system". I am service partition is still intact with the hard disk. It would be really helpful if someone can share his knowledge and experience.
thanking in advance
yogesh

Hi,
The recovery DVDs from Lenovo should get you going.
Are you trying to shrink the C: partition from within Windows? It's probably the page or hibernation file that is the problem. If you want to keep trying while waiting for the DVDs you could try an off-line partitioning tool. gParted on a Linux live CD or USB flash drive for instance.
There is some cloning software that can do a shrink during the clone op - Acronis for instance.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

BR0252E Function remove() failed

While trying to extend the tablespace (PSAPCRM), I encounter an error :
BR1001I BRSPACE 7.00 (40)
BR0252E Function remove() failed for '/oracle/SID/sapbackup/.user.pas' at location global_set-5
BR0253E errno 13: Permission denied
BR0700E Fatal errors occurred - terminating processing...
BR1008I End of BRSPACE processing: seadhacx.log 2009-03-15 22.45.39
BR0280I BRSPACE time stamp: 2009-03-15 22.45.39
BR1007I BRSPACE terminated with errors
Any clues pls ?
Regards
Shaji

Hi Jacob,
Can you tell us with which user you are running?
I think there are some file permission are missing with that user id.
Please follow SAP NOTE 113747 to give sufficiant access privillages for BRTOOLS.
Regards
Nick Loy

Brbackup command is sometimes failing with function remove() error.

Hi All,
while taking brbackup using 3rd party tools, getting error like;
BR0252E Function remove() failed for '/mnt/st_v_data1/CER/sapbackup/.bdvqdoqt.lst' at location BrUtilCall-1
BR0253E errno 4: Interrupted system call
BR0231E Backup utility call failed
Console Output
bash-2.05$ brbackup -d util_file_online -m all -t online -c
BR0051I BRBACKUP 6.40 (40)
BR0055I Start of database backup: bdvqdoqt.anf 2007-07-05 06.14.27
BR0280I BRBACKUP time stamp: 2007-07-05 06.14.32
BR0319I Control file copy created: /mnt/st_v_data1/CER/sapbackup/cntrlCER.dbf 3579904
BR0280I BRBACKUP time stamp: 2007-07-05 06.14.33
BR0057I Backup of database: CER
BR0058I BRBACKUP action ID: bdvqdoqt
BR0059I BRBACKUP function ID: anf
BR0110I Backup mode: ALL
BR0077I Database file for backup: /mnt/st_v_data1/CER/sapbackup/cntrlCER.dbf
BR0061I 22 files found for backup, total size 708.578 MB
BR0143I Backup type: online
BR0130I Backup device type: util_file_online
BR0109I Files will be saved by backup utility
BR0142I Files will be switched to backup status during the backup
BR0126I Unattended mode active - no operator confirmation required
BR0252E Function remove() failed for '/mnt/st_v_data1/CER/sapbackup/.bdvqdoqt.lst' at location BrUtilCall-1
BR0253E errno 4: Interrupted system call
BR0280I BRBACKUP time stamp: 2007-07-05 06.14.33
BR0231E Backup utility call failed
BR0056I End of database backup: bdvqdoqt.anf 2007-07-05 06.14.33
BR0280I BRBACKUP time stamp: 2007-07-05 06.14.35
BR0054I BRBACKUP terminated with errors
Please need help
Thanks & Regards
Bhaskar

Thanks for your response Fidel
I'm executing the backup from this script
C:\usr\sap\PRD\DVEBMGS02\exe\brbackup.exe -u / -p initPRD.sap -d disk -t online_cons -m all -c force
Drive e: is not a drive shared over the network. It is an external USB disk attached to the server running SAP. I've given user SAPSERVICE<SID> full rights to drive e:
2) change the fixed "drive" letter to UNC name (like
<server>\<directory_path>
When I use UNC name in place of the drive lettter I get the error message below
#backup_root_dir = E:\prd_oracle
backup_root_dir =
NXXX-HX-PXD1\prd_oracle
BR0259I Program execution will be continued...
BR0051I BRBACKUP 7.00 (42)
BR0282E Directory '
NXXX-HX-PXD1\prd_oracle' not found
BR0182E Checking parameter/option 'backup_root_dir' failed
BR0056I End of database backup: behmicld.log 2011-12-21 12.11.37
BR0280I BRBACKUP time stamp: 2011-12-21 12.11.38
BR0054I BRBACKUP terminated with errors
BR0292I Execution of BRBACKUP finished with return code 3
BR0668I Warnings or errors occurred - you can continue to ignore them or go back to repeat the last action

Recs for Beans to replace sound and OLE functionality removed in 9i ?

Does anyone have any recommendations (and even sample code) for replacing the sound and OLE functionality removed in Forms 9i.
The application is for a simple media storage function (store and play images, sound, video, compound documents, etc.) in the database. It works great in 6i fat-client...

Hi,
Go to transaction PHAP_CATALOG
You will see all the Category groups / Category / Templates tree in the left pane
Now double click on your Category Group ( Second level in the tree )
> Go to tab "enhancements"
> Find your implementation in the list "Available" on right pane
( if it's not in this list , you should check oohap_basic and oohap_Category steps again )
> Move it to left side pane
> Save
and I recommend u to leave and run transaction PHAP_CATALOG again.
Now your enhancement is included in your template.
> Now double click on category
> Go to "columns" tab
> Fill the column "value determination" for the field you wish to use

Before the most recent iPad upgrade, when listening to audiobook, I could tap a rewind symbol (circle with arrow) that replayed last 30 seconds - was this function removed? It is still on the iPhone.

Before the most recent iPad upgrade, when listening to audiobook, I could tap a rewind symbol (circle with arrow) that replayed last 30 seconds - was this function removed? It is still on the iPhone.

Before the most recent iPad upgrade, when listening to audiobook, I could tap a rewind symbol (circle with arrow) that replayed last 30 seconds - was this function removed? It is still on the iPhone.

Why was command-option-click functionality removed. Please bring back.

Can anyone fill me in on this issue.
I used to use command-option-click hundreds of times a day. Cleared out all windows and got me to the application I wanted to use. It is, apparently, gone in Mavericks.
I'd be interested to know why it was removed. I also want it back.
And, I'd llike it brought back with the functionality changes so that the application I make active with the command leaves the "hide" options in the Application pulldown menu active. My one complaint about the shortcut was that it grayed out the "hide" options so I had to click out of the application and back in to use them.
Please, please, I really want the shortcut!
--Kenoli

totally agree- the loss of 'pinch to resize' is a disaster.
It was one of the main reasons i'd use it over powerpoint.
C'mon Apple!
rob

App Store, Pages 5.0, Evernote, and other Apps will not fully function after installing Mavericks. What is the issue and how can this be solved?

Hello all, I could use some serious help on some major issues I have been having after installing Mavericks on my system (specs stated below). Never has a mac felt ever so rebelious and broken before in my lifelong period of using these systems. Anyway, after installing system 10.9, I had opened the mac App Store upon seeing that applications such as my iWork suite all had free updates. However, when I would attempt to navigate to the updates window, it would not respond to my various attempts. I then tried to get there by the system's menu bar and to my dismay, nothing would work when I clicked on it, not even the apple logo menu. I later quit the application using Command-Q and opened up the App Store by the apple menu option 'Software Update...' instead. Though it looked promising since the updates window did open, all update buttons or even '...more' info buttons were unresponsive. These same problems persisted even after restarting my computer. I had also attempted to see if repairing definitions would help by booting from the recovery start-disk and using disk utility but the repairs it carried out apparently had nothing to do with my issue. Finally, I was able to update to the new iWorks suite (which interestingly did not replace the iWorks '09 suite) by following the notification that asked about allowing automatic updates which I did.
Once trying to use Pages 5.0, I soon noticed that all I could do was merely type in a new document and change various options via key commands. Neither the inspector or top bar menus would respond to any place I click. Similarly, Evernote only starts up on the last used note and merely allows me to scroll through it. The top bar menus, the note select pane, and even clicking inside the note to input text are all not functioning and uninfluenced by any mouse clicks.
I have noticed other apps that will not respond to any sort of input, but I still have not explored all applications to know what the issues of each may be. However there are some applications that work such as Safari, Google Chrome, dolphin, iWork '09 including Pages '09, and others.
I do hope that I can avoid rolling back my system, but in the meantime, it has been quite the obticle course to use my computer for all of my school purposes.
Any help is very much appreciated,
Thank you!
DT
MacBook Pro 13-inch, Mid 2009
Processor 2.26 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400M 256 MB

I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
DT

New iTunes "wish" list function Removed

I'm hoping somone might be able to offer a suggestion to help get my workflow back since the new iTunes 11 release has removed my most useful feature.
I am a DJ and spend a good 6-8 hours a week creating playlist, partly managing the music I own and partly locating songs in the itunes store. What I used to do: If I didn't own a song, I'd locate it in the itunes store, drag it into a general playlist where I could move it around (unpurchased) to other playlists and when I was done I could go through my playlist and purchase the songs that I wanted to. Many people never knew this was possible. This streamlined the process and allowed me to give the boot to songs that I didn't think were worth the purchase (when purchasing 20-40 songs a week, every $1.29 counts!) I learned of this function from apple years ago... They didn't promote it much, but it was a function they built in to allow people to do just what I did... create a list and then purchase the songs.
The new itunes does not seem to support creating these "wish lists" on my desktop... I know about the wishlist feature that is store based. The problem is that I only have the ability to have ONE wishlist... when I need at least three to keep my music organized for my upcoming events. I still have the older version installed on my main computer, but I know I'm going to have to make the leap soon and know the loss of this functionality is going to be extremely stiffling to my productivity.
Any assistance, tricks, ideas, etc would be welcome and appreciated!!

I figured out a workaround and posted it in this thread - https://discussions.apple.com/message/20751126#20751126
It is kind of a hassle, but at least you can still put songs in your own wishlists.

Function @REMOVE doesn't work

Hello,
I'm trying to clear a block of data, but I'd like to remove just one member from the list before clearing.
I'm executing the script below, and the member E10.1095 is not excluded.
FIX(@DESCENDANTS("C6590000"))
FIX(@REMOVE(@RELATIVE("ELQCO",0),"E10.1095";))
CLEARDATA "Reel";
ENDFIX
DATACOPY "ELQCO" TO "E10.1095";;
ENDFIX
Does anyone knows if I'm doing anything wrong?
Thanks in advance,
Marilia Araujo

Hi,
I believe the function takes two lists as the parameters so give this a try
FIX(@DESCENDANTS("C6590000"))
FIX(@REMOVE(@RELATIVE("ELQCO",0),@LIST("E10.1095")))
CLEARDATA "Reel";
ENDFIX
DATACOPY "ELQCO" TO "E10.1095";;
ENDFIX
Cheers
John
http://john-goodwin.blogspot.com/

User define function-remove leading zeros

Hi All,
i want java coding for mapping function rule "remove leading zeros" early.
kindly give me response as early as possible.
regards
Peera

Hi Mahaboob
Write UDF to parse data .
String dataVal="0230";
int parseVal = Integer.parseInt(dataVal);
System.out.println("parseVal is "+parseVal);
result.addValue(parseVal); or return parseVal;
Have a look at this thread...
Re: User-defined function in multiple Message Mappings
http://help.sap.com/saphelp_erp2005/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/22/e127f28b572243b4324879c6bf05a0/frameset.htm
Thanks !!!

RH7 ToC design functionality removed?

In RH up to version 6, there was a very useful feature
whereby you could rearrange Topics and Books in the Table of
Contents by means of keyboard shortcuts: Ctrl+ arrow keys. This
proved to be so quick and easy that I sometimes mastered printable
manuals in RH, rearranged the chapters and sections in seconds, and
then exported them into Word, for final formatting, then into PDF,
and off to the printers. (Online Help was not required).
Now I find that these useful keyboard shortcuts HAVE BEEN
REMOVED. Or is there a setup checkbox that I can Tick to switch
them back on again?
This appears to be yet another frustration with a new release
of a product, when the programmers have actually taken the trouble
to remove useful functionality and consider it to be an
improvement.
Or am I missing something?
Sigh...
Somebody pass this to the Product Manager. Please?

Hi Philip
Sorry, but while one of us here can certainly alert the
developers to the issue, the very most effective way to do so is by
you and others submitting a Wish Form/Bug Reporting Form. You may
do this by
clicking
here and completing the form that should display.
Cheers... Rick

Open Office Not Functioning Properly After Mavericks 10.9.1 Update Today

Is anyone else getting this issue?
Everyone in the company I manage was using MS Office on their Windows-based computers and we were getting a lot of annoying formatting incompatibilities becasue I was using Pages on my Mac. I actually prefer Open Office and started using that again but we were still having trouble. I decided to install Open Office on all of our computers to avoid cross-platform dramas and with us all using Open Office, it has meant that we've elimintated all annoying little formatting incompatibilities and other problems.
We've been using Open Office on 3 Windows-Based computers and my MacBook Pro for about 3 months. I agreed to the latest Mavericks update 10.9.1 today and since then, whenever I start my Open Office application, I'm getting this annoying little box that won't go away (see attached picture) and numerous options in Open Office can't be accessed. I've deleted and reinstalled Open Office this morning and tried different combination of shutdown, restart, force quit and nothing seems to affect this problem. I also can't reopen files recently opened because an error box pops up to say that they can't be opened because Open Office is not installed. Yet I can go to finder and open them from there.
It would take too much time to list all of the separate issues I've found; so in summary, a lot of the Open Office functionality just ISN'T WORKING since the Mavericks update today. Apple, what have you done?! What can BE done to fix this?

Hi navaneeth27
Yes that's exactly what I'm experiencing.
I'm wondering whether it has something to do with having had Open Office running while installing the update to Mavericks 10.9.1. I had OO open when I agreed to the update and I was still working on a Writer file when my MacBook Pro unexpectedly shut itself down and began installing the update, showing only a progress bar in a small window before reloading everything. It was at that point that the unresponsive 'Don't Reopen' 'Reopen' window appeared. It's insidious and stopping much of the functionalty of OO from working. Such a pain!
I force-quit OO, fully uninstalled it, purged all mention of it from my MBP, restarted tried opening files that were set to be opened by OO by default, and confirmed that they were being opened by Pages - and they were by default. I then reinstalled OO 4.0.1 from the OO site (and that's what I had earlier today, before this adventure began). I then tried opening some previous documents that were saved as .doc and OO popped up WITH the 'Don't Reopen' 'Reopen' window AAAAGAIN!
I'm working on 2 screens so I've placed the box that just won't go away at the very edge of my MBP screen and am workng on files on my second screen - but much of the functionality still isn't available.
I'm stuck and don't know what to do next.

Help with remove.Instance function removing the wrong row

Hi there,
I have been working on Livecycle forms for about two weeks now and have been able to work out quite a bit of what I need to do. However, I am really hoping someone can help me with a two problems that I cannot seem to solve.
The first one is; if I click on the 'remove a row' function on my form and it is the only row, it comes up with an error message, How do I stop that from being displayed? I think I need to use the IF function with >1 but cannot seem to get it to work.
Secondly, if for example I add two rows using the +row button to make three rows and in rows 1&2 I input some data. If I then want to delete row 3 and press the -Row button it deletes row number 2 and the data in that row and leaves row number 3. How can I change it so that when I delete a row it deletes row number three and leaves row number 2. essentially, I need it to delete rows from the bottom up and not from the top down. Hope this makes sense. Any help would be greatly appreciated!
Attached is a link to my form.
https://copy.com/RiktBtj0uiSA
Thank you.

Hi there,
When removing instances within an object's event which is inside the instance, you must make sure that you remove this particular instance at the end of the event.
E.g.:
If you remove the instance of which the button is inside before even finishing the whole event, the program will not recognize what event is to be finished because you have removed the object's which is fired..
So here you are trying to finish some code which doesn't exist anymore ...
I suggest you should always remove the instance of (this) object at the end of any event to make sure to finish all your actions before deleting the object.
Hope this help!

Servermgr functionality removed in Mavericks?

Similar Messages

Maybe you are looking for