SERVIC~1.EXE Stays Running After PC Suite Exits

It's great that automatic start-up is now optional in PCS version 6.80.20, and that you can 'Exit' from the sys tray icon. But when I use Exit, it always leaves SERVIC~1.EXE running. Does this matter and is it a bug? (XP2 fully patched; Nokia 6021; Bluetooth).

In most cases and by default, the frmweb process will die approximately 15 minutes after receiving its last heartbeat from the client. This assumes the runtime is not in a hung or spinning state. My recommendation is the following:
1. Set networkRetries to 5 (in formsweb.cfg)
2. Set FORMS_TIMEOUT to 10 (in default.env)
3. Set HEARTBEAT to 5 (in formsweb.cfg)
Finally, be sure you are using a newer, certified JRE. For example 1.6.0_31.

Similar Messages

Installer build spec loses spec for exe to run after

I don't know why, but now & then the build spec for my application installer loses the setting in the Advanced tab to run a certain .exe after installing. The .exe to run after installing is created by a build spec in the same project (from LV source). Besides rebuilding that .exe (without changing the .exe's build spec, name, or location, just minor source code mods), nothing has changed in the project, but the installer's Advanced setting will suddenly be gone. What the heck?!
My project & source files are too large to attach.

Hi Meg,
I noticed this forum post and figured I would chime in here as well.
We have been working on this issue and are hoping to isolate the exact steps that cause the sporadic loss of the postbuild EXE setting. An initial suspicion was the EXE being moved or rebuilt to a different location. That being said, if anyone has run into this issue in the past and has any insight it would be appreciated, as this problem has not been consistently reproduced.
Thanks,
Matt
Product Owner - NI Community
National Instruments

Why does the app (acrobat.exe) stay alive after the document is closed?

Using system Explorer or HijackThis, it is apparent that the acrobat.exe app stays active after the document that called the app is closed. Why? and how do I stop it from happening?

I have the same problem and it is irritating because if I print and save a pdf file using Acrobat, I cannot change the file name or delete the file because the system somehow thinks the file is open in the Acrobat.exe application, even after I have closed out pdf file and all Adobe applications in my user account. I need to go to the Task Manager and find the Acrobat application running under SYSTEM in order to stop the process so I can go back and change the file name or delete it...
This did not occur until my recent update to Acrobat 9.4.2.220 . Is this fixable somehow?

Premiere Pro CS 6.exe stays active after closing the program

I am experiencing a problem with Premiere Pro CS 6.03. When I close the program, the second monitor would not return to desktop (it stays a black screen). The premiere pro cs.exe is active in taskmanager. Only after I end the exe process would the second monitor return to desktop. I am not using any third party hardware, only Adobe player for second monitor out. This problem occurs often, but not every time I use Premiere. I have never experienced this problem in Premiere Pro CS 5.03, which is still installed on the same PC. The technical Spec is: Intel 3930K, 32 GB RAM, GTX 560, Windows 7 Professional 64 bit. I have tried to toggle between different NVidia drivers, but with no effect.
Any help would be appreciated!

I've had the process stay open after closing the program as well, but only on one of my two machines. For me, the 6.0.3 update seemed to correct the issue. Not sure why it's still happening in your case.

Schedule a program to run after a substituition exit is triggered??

Hello developer gurus,
We need to run a report to correct some consistency in settlement document table. The requirement is we need to run this after a substituition exit is triggered and finished updating a settlement rule in a WBS.
Woule you please suggest how this can be achieved?
Monica

Hi,
You can use these FMs to submit job in background
1.job_open
2.job_submit
3.job_close
You can go to transactions like SM36 - for job scheduling
SM37 - for Job overview.
Regards,
Jyothi CH.
Edited by: Jyothi Chinnabathuni on Feb 6, 2009 11:16 AM

PSE 10 exit app, PhotoShop Elements 10.0.exe stays running

My drive crashed and had to be rebuilt.
Reloaded PSE from my dvd.
When I close PSE app PhotoShop Elements 10.0.exe does not close.
PSE editor closes as it should.
PSE will not restart unless I manually kill the executable.
Other observations:
I don't get the welcome screen after reload. It starts with the blue window
Sign in hangsas well as create new id hangs.
Home button is unresponsive.
I've seen solutions but so far no fix.

Lightroom 5 will not install on WIndows XP.
So that's not an option.
I have not heard that the Mac version of Lightroom can only import PSE9 and PSE10 catalogs; and I am highly skeptical. In fact, I believe your statement is incorrect. Can you provide a link to where you heard this?
If I were you, I'd separate the "move to the Mac", from the issue of upgrading the PSE7 catalog to a LR catalog. You are just asking for problems if you combine these two. Once things are in Lightroom and working properly, you can move to the Mac.
So, what I would do, is install LR3 (a trial version) on your Windows XP computer, and upgrade the PSE7 catalog to an LR3 catalog. Now that everything is in Lightroom, you should be able to move everything to the Mac, relink if necessary, then upgrade to LR5.

Firefox stays running after closing using the "X" to close program. XP OS

Closed Firefox V6.X on XP OS using the "red X", come in the next day, click icon to open, error is that Firefox is already running. Checking Task Manager shows that it is running, have to use Task Manager to close program in order to start firefox. This happened in a previous version of FireFox.

See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

Freezes when redirected on web & firefox32.exe still running after closing app

When a link leads to a "redirect" page, Mozilla freezes.
Dell laptop w/ Win7 Home Premium
No crash reports exist although "Submit crash reports" is checked...
Thanks for any help.
Ed

Hai Erik,
That was execellent work done. But
I have not been able to use javaw properly.Can You Help me?
See,I have used javaw class name.Then Put all paths and command lines into a batch file.Then I ran the batch. Now If I click that batch file it runs. But How can we use javaw as like is done in the demo folder of jdk1.2.2. They have got jfc folder in which all jar files are double clickable and are executed directly. Now how Can I do that?
Thank you very much.
Pulin
[email protected]

Using firefox 7.0.1 in Win XP (SP3), firefox.exe still runs after I exit and I have to end this process in task manager in order to get Firefox to run again. Fix?

I tried exiting Firefox using the File|exit menu item or just killing the window and (of course) re-booting the computer to see if that fixes the problem. Is this perhaps an incompatibility between the latest version of Firefox and Windows XP? (I do not have a problem like this on my Win 7 Professional (SP1) machine.)

take a look:
https://support.mozilla.com/en-US/questions/882621
thank you

Socket stays open after java process exits, Runtime.exec()

I have a program that does the following:
opens a socket
Does a runtime.exec() of another program
then the main program exits.
what i am seeing is, as long as the exec'd program is running, the socket remains open.
What can i do to get the socket to close?
I even tried to explicity call close() on it, and that didn't work. Any ideas would be great.
I am running this on WindowsXP using netstat to monitor the port utilization.
here is some sample code
import java.io.*;
import java.net.*;
public class ForkTest
    public static void main(String[] args)
        try
            DatagramSocket s = new DatagramSocket(2006);
            Process p = Runtime.getRuntime().exec("notepad.exe");
            System.out.println("Press any key to exit");
            System.in.read();
        catch (IOException ex)
            ex.printStackTrace();
}

java.net.BindException: Address already in use: Cannot bind
        at java.net.PlainDatagramSocketImpl.bind(Native Method)
        at java.net.DatagramSocket.bind(DatagramSocket.java:368)
        at java.net.DatagramSocket.<init>(DatagramSocket.java:210)
        at java.net.DatagramSocket.<init>(DatagramSocket.java:261)
        at java.net.DatagramSocket.<init>(DatagramSocket.java:234)
        at ForkTest.main(ForkTest.java:11)

Cellular service stays on after checking account

I have the Verizon 16 GB iPad3 and usually have the cellular data service off. Whenever I check my Verizon data account on my iPad, the cellular data service connects and stays on after I disable the service. Is this issue known or unique to my iPad? Any fix?

There is the bug 6545973 for the same issue on the ST2540, because the code tree is similar, I'm suspecting that this issue happens also on the ST2530.
We have been unable to reproduce this issue with the latest array f/w 06.70.00.11, hence I would suggest you to upgrade to that version. You need to download the appropriate patch depending on the platform you use and the CAM version (ie: 5.1.3 or 6.0) you use.
Please have a look at http://docs.sun.com/source/820-3511-10/2500_RN_chapter.html#50483206_pgfId-1075396.

Tp.exe is running??

Hello All,
Even when we stopped our BI 7.0 server tp.exe is running in the services.TP.EXE stays in the task manager and doesn't terminate correctly..More than 1 tp.exe was running though we have stopped the application server from MMC.
Database we are using is sql server 2005.BI 7.0 & PI 7.1 is sharing the same database but application is running on different server.Why is tp.exe running even though we stopped the application??

This is happening because the TP process is already running. Best option is to kill the tp process manually and then restart the import again for the request. It sometimes happens due to abrupt connection breakup during a import. If you see this tp process hanging frequently then only you should be concerned.
Regards
Javed

I found a remote service running after the 10.10.3 update. ps -A|grep remote. And I had remote management turned off in prefs.

I found a remote service running after the 10.10.3 update.
ps -A|grep remote.
And I had remote management turned off in prefs.
I force quit the process with activity monitor.
This looks as if it could be a problem.

Well the term "hotlined" I have never heard before. In any case many states (like NY) just passed regulatory powers to the State Public Service Commission of which it may be called something different in your state. You could file a complaint with them. Or file a complaint with your state attorney generals office, they also take on wireless providers.
The problem here is the staff you speak to are poorly trained, in days gone by it took one call to them and they pulled up your account and see the error and had the authority to remove any errors. They did not remove legitimate account actions, but used their heads instead of putting a customer off or worse lying to the customer.
Its a shame you have to go through what you going through.
Good Luck

CF10 App server running after reboot; but website unavailable until service restart

Hello, everyone.
I recently returned to a job I previously had after several months at a different job. Upon my return, I inherited someone else's dev system (my previous dev system, apparently, had been reimaged and given to someone else, after I left.)
This system originally had CF9 server on it (the ColdFusion9 folder is still here) and now has CF10. Using the built-in web server (no IIS, no Apache.)
Every time I boot/reboot the system, I can see in Computer Manage System that CF10 Application Server is, indeed, running. But if I try to open any of the pages that I am working on, I get an error message that the site can't be found.
I go into Computer Manage System, go to Services, right-click the CF10 Application Server, choose "Restart", wait for it to finish, and voila!, I can get a working page.
Does anyone know why this is happening, and/or how to remedy it so that CF will work immediately after boot/reboot without going to restart the service?
Thank you,

Good to hear you solved it. If you may still want to know exactly why that was causing an issue, I would propose something I didn’t yet see anyone else do: look specifically at the CF log called coldfusion-out.log. That is basically the “console log” when you run CF as a service, and it would be interesting to know what was in that log if you compared the startup messages in your working and failing examples.
The log tracks info generally for days if not weeks or months (depending on what else is logged in the file and how quickly it fills), but it may well give you insight into what was up. I’m not saying there WILL be something there. As Anit said, what you experienced was odd, but if there will be something logged anywhere about this, it may be there.
If nothing else, I leave this here for anyone else who has a similar sort of problem in the future.
/charlie
Re: CF10 App server running after reboot; but website unavailable until service restart
created by WolfShade <http://forums.adobe.com/people/WolfShade> in ColdFusion Server Administration - View the full discussion <http://forums.adobe.com/message/6199851#6199851

Dedicated Client leaves iexplore.exe running after shutdown / Windows 7 IE8

Hi All,
Recently I have noticed an annoying behaviour of the Siebel Dedicated/Developer Client on Windows 7 with IE8.
Everytime it is being shut down, it leaves the iexplore.exe running. This is especially annoying when developing on Win7 because everytime you compile some changes to your SRF, a new instance of iexplore.exe will be started, while the old one is not killed. So after 2-3 hours of development I have like 30 iexplore.exe processes running and finally Siebel starts to do strange things (compiled changes are not reflected in the client, old objects are shown etc)
I know there is already a CR on MOS: 1226854.1 but I was wondering whether someone has found a way to stop this? I assume there could be some registry parameter or IE setting to make it behave like before?

Not sure where to look now.
That's normal. The 64-bit process is called a "chrome task" and the 32-bit processes are called "tab tasks". You can use WMIC to check them:
wmic.exe Process where Name="iexplore.exe" Get CommandLine, ProcessId
you will notice that they are correlated by SCODEF: being equal to the chrome task's PID.
FYI
Robert Aldwinckle

SERVIC~1.EXE Stays Running After PC Suite Exits

Similar Messages

Maybe you are looking for