Service Activation for CUCM as dedicated TFTP server

Hi all,
I have used CUCM as call controld and TFTP server but never used CUCM as a dedicated TFTP server.
Do you know what serivces should be enabled on CUCM box as a dedicated TFTP server?
Version is 8.6.2a and here is what I have:
Under "CM Services"
- only tftp service is activated
Under "CTI Services"
- none is activated
Under "Database and admin Services"
- all activated but not sure they are required
Under "Performance and Monitoring services"
- all activated
Under Secuirtiy Serves
- none is active as don't needed
Thaks,
Harry

If the server is only to be used as TFTP that is the only service you need to activate.
Chris

Similar Messages

Have a dedicated TFTP Server for CCM cluster

Hi,
One CCM3.3(3) cluster in production, in which the publisher server was the TFPT server.
Now we need expend the system and would like to deploy a dedicated TFTP Server for the cluster. Is there anyone telling me what I should concern if I have a dedicated TFTP server other than the publisher server?
Thanks,
JJ

Hi,
I have a similar issue. I have actually a pub and a sub, the pub is also the tftp server. Following the SRND, I need a dedicated tftp server because we're almost at 1250 users, growing every day. My question, which may seem very basic, is how do I build a dedicated tftp server ?

How to make CUCM as a TFTP server , then copy files to Voice Gateway ?

how to make CUCM as a TFTP server , then copy files to Voice Gateway ? anyone knows?

Hi,
Please check the following link
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/6_1_1/ccmsys/cucm-accm-611/a02tftp.html#wp1023004
Understanding How Devices Access the TFTP Server
You can enable the IP phones and gateways to discover the TFTP server IP address in one or more of the following ways, depending on the device type:
•Gateways and phones can use DHCP custom option 150.
Cisco recommends this method. With this method, you configure the TFTP server IP address as the option value.
•Gateways and phones can use DHCP option 066.
You may configure either the host name or IP address of the TFTP server as the option value.
•Gateways and phones can query CiscoCM1.
Ensure the Domain Name System (DNS) can resolve this name to the IP address of the TFTP server. Cisco does not recommend this option because it does not scale.
•You can configure phones with the IP address of the TFTP server. If DHCP is enabled on the phone, you can still configure an alternate TFTP server IP address locally on the phone that will override the TFTP address that was obtained through DHCP.
•Gateways and phones also accept the DHCP Optional Server Name (sname) parameter.
•The phone or gateway can use the value of Next-Server in the boot processes (siaddr).
Devices save the TFTP server address in nonvolatile memory. If one of the preceding methods was available at least once, but is not currently available, the device uses the address that is saved in memory.
You can configure the TFTP service on the first node or a subsequent node, but usually you should configure it on the first node. For small systems, the TFTP server can coexist with a Cisco Unified Communications Manager on the same server.
HTH
Manish

Deploying a Web Service developed for WebSphere to Oracle App Server

I have an EAR file containing a web service (exposed as a servlet) that was developed using WebSphere Studio and originally deployed to a WebSphere application server. It should be J2EE 1.4 compliant. I now want to deploy it as a web service on Oracle Application Server.
Is it as simple as just deploying the EAR to OAS? Or do I need to (re-)assemble the EAR using the Web Service Assembler tool and then deploy it? What is the best practices approach for this scenario? My goal is to develop a web service that is deployable to both WebSphere and OAS with as little fuss as possible.
Thanks

using Ant.
check apache.org project there they have the ant section.
Regards

How to change path of Users Terminal Services Profile for multiple AD users on server 2003?

Hello experts. I am working on a file server migration. All data has been migrated, I am currently working on redirecting users to the new file server. I
am able to select multiple users at once in ADUC -> right-click -> properties -> profile and here I can change the home folder and roaming profile path for each all users to point towards the new file server.
The issue I have run in to is that we have roaming profiles for terminal services users. So, there are hundreds of users that have their terminal services profile
configured in AD -> Right-click user (one at a time) -> properties -> terminal services profile. Here, the profile path is configured for each user as \\OLDserver\Profiles\%username%
and I need to change it to \\NEWserver\profiles\%username%.
I know that you can configure this path via group policy, I set up a GPO; Computer / Administrative Templates / Windows Components / Terminal Services / “Set Path
for TS Roaming Profiles” as \\NEWserver\profiles and applied this GPO to an OU containing the TS servers.
The problem is, the GPO is not working... When I log in to the TS and add a document to My Documents, it is still saving under \\OLDserver\profiles\Username.
So, the settings in AD are trumping the GPO I believe. What is the best way to accomplish my goal? Thanks in advance!

> to change it to \\NEWserver\profiles\%username%.
That is "profile" in opposite to...
> add a document to My Documents, it is still saving under
> \\OLDserver\profiles\Username.
...this one which is Folder Redirection and has NOTHING to do with
server based profiles.
> So, the settings in AD are trumping the GPO I believe.
No, it isn't. When you do not enable FR and you access "Documents", you
will never see an UNC path but the local c:\users\xyz\documents folder.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Can anyone share - Web Service / WSDL for either Access or SQL Server

I am a newby and have never written a web service so I hoing someone will share a WSDL that is working for them!
Thanks in advance for your help!

I think it fails on decoding the Web Service response. I
would try to set resultFormat to e4x. In this case, no decoding
takes place and you can get whole soap body in event.result.
- Mykola

Server 2012 key activation for VMs that run on Server 2012 OEM license

Hi
My customer purchase a Dell Server with pre-install OEM Windows Server 2012 standard license, he created 2 VM and attempt to use key provided with physical host. It was fail with error message of 'Key is invalid'. Does customer need to obtain another
key for VM from Microsoft or Dell need to provide this?
thank you

Hi,
OEM key will not be recognized when trying to install a new system as it is not the standard format (25 bytes). As it is an OEM system you should suggest your customer to contact Dell for further help.
TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

TFTP server other then CUCM !

Hi all.
In case of CME or CUCM, where both of them are required to generate phone specific xmls for manually added phones, is it possible to define windows/linux system as tftp server to serve these files ?
If yes, how the files shall be copied from CME/CUCM to that tftp server ?

Hi John
Yes, it's possible. But as you've pointed out, keeping an external TFTP server up to date with config files and all the other stuff (ring files, moh files, firmware loads etc) is not trivial.
In later versions of CUCM the phone loads support a 'load' server. You can put the TFTP load files (which are more static that config files) on their and have the phones download firmware from there, but config from CUCM.
The bottom line is that (at least in my opinion) it's generally not a great idea. Let CUCM or CME do it; they're perfectly capable, and if you have a CUCM system that is big enough to warrant it, you can have a CUCM as a dedicated TFTP server.
Regards
Aaron
Please rate helpful posts..

[SOLVED] "Server is already active for display 0" in Terminals

So far, my searches haven't yielded any solutions to this.
When my system starts, it boots to a console login prompt (no gdm, etc...) and I have 'startx' in my .bashrc to start my desktop. The desktop starts and functions fine (or so it seems).
Problem 1: Anytime I open a Terminal window (or open new tabs inside a Terminal) I am greeted with the following:
Fatal server error:
Server is already active for display 0
If this server is no longer running, remove /tmp/.X0-lock
and start again.
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
xinit: Server error.
Sometimes the last line is:
xinit: unexpected signal 2
Usually I just ^C to get a working prompt and go about my business, but this is getting really annoying.
Problem 2: I use Guake terminal and have it set to autostart in my .bashrc, but it doesn't work until I manually open a Terminal window. And if I close that (manually opened) window, Guake stops working. If I open another one manually, it works again...etc. I have a hunch this is related to the first problem.
Any nudges in the right direction would be appreciated.
My environment:
DE = Xfce4
Kernel = 2.6.31-ARCH
Xorg = xorg-server 1.7.3.901-1
Video = xf86-video-ati 6.12.99.git20091014-1
/etc/X11/xorg.conf:
Section "ServerFlags"
Option "AutoAddDevices" "True"
Endsection
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "extmod"
Load "dri2"
Load "dbe"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 340 190 # mm
Identifier "Monitor0"
VendorName "AUO"
ModelName "10ec"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # 
#Option "AGPMode" # 
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "RingSize" # 
#Option "BufferSize" # 
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # 
#Option "DepthBits" # 
#Option "PCIAPERSize" # 
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "CustomEDID" # [<str>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # 
#Option "RageTheatreCrystal" # 
#Option "RageTheatreTunerPort" # 
#Option "RageTheatreCompositePort" # 
#Option "RageTheatreSVideoPort" # 
#Option "TunerType" # 
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # 
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "ClockGating" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" "True" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "DynamicPM" # [<bool>]
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RS780M/RS780MN [Radeon HD 3200 Graphics]"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
/var/log/Xorg.0.log (filtered through grep for (WW) and (EE)):
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM
(EE) RADEON(0): Acceleration initialization failed
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(WW) RADEON(0): LVDS Info:
(WW) RADEON(0): Direct rendering disabled
~/.xsession-errors:
/etc/gdm/Xsession: Beginning session setup...
/etc/gdm/Xsession: ssh-agent not found!
/etc/gdm/Xsession: Setup done, will execute: gnome-session
gnome-session[28618]: WARNING: Could not parse desktop file /home/jon/.config/autostart/xfce4-tips-autostart.desktop: Key file does not have key 'Name'
gnome-session[28618]: WARNING: could not read /home/jon/.config/autostart/xfce4-tips-autostart.desktop
gnome-session[28618]: WARNING: Could not parse desktop file /home/jon/.config/autostart/xfce4-settings-helper-autostart.desktop: Key file does not have key 'Name'
gnome-session[28618]: WARNING: could not read /home/jon/.config/autostart/xfce4-settings-helper-autostart.desktop
gnome-session[28618]: EggSMClient-WARNING: Invalid Version string '0.9.4' in /home/jon/.config/autostart/wicd.desktop
gnome-session[28618]: WARNING: Unable to find provider 'metacity' of required component 'windowmanager'
gnome-session[28618]: WARNING: Unable to find provider 'nautilus' of required component 'filemanager'
GNOME_KEYRING_SOCKET=/tmp/keyring-6lpdg3/socket
SSH_AUTH_SOCK=/tmp/keyring-6lpdg3/socket.ssh
(gnome-panel:28681): Gtk-CRITICAL **: gtk_accelerator_parse: assertion `accelerator != NULL' failed
** (gnome-panel:28681): WARNING **: Unable to parse mouse modifier '(null)'
tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Can't locate XML/Parser.pm in @INC (@INC contains: /usr/lib/perl5/site_perl/5.10.1 /usr/share/perl5/site_perl/5.10.1 /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5/core_perl /usr/share/perl5/core_perl /usr/lib/perl5/current /usr/lib/perl5/site_perl/current .) at /usr/lib/xfce4/xfconf-migration/xfconf-migration-4.6.pl line 20.
BEGIN failed--compilation aborted at /usr/lib/xfce4/xfconf-migration/xfconf-migration-4.6.pl line 20.
(polkit-gnome-authentication-agent-1:28707): GLib-GObject-WARNING **: cannot register existing type `_PolkitError'
(polkit-gnome-authentication-agent-1:28707): GLib-CRITICAL **: g_once_init_leave: assertion `initialization_value != 0' failed
tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Unable to open desktop file epiphany.desktop for panel launcher
Unable to open desktop file evolution.desktop for panel launcher
/usr/lib/python2.6/site-packages/wicd/gui.py:151: GtkWarning: gtk_toolbar_set_icon_size: assertion `icon_size != GTK_ICON_SIZE_INVALID' failed
self.wTree = gtk.glade.XML(gladefile)
ERROR:dbus.proxies:Introspect error on :1.70:/org/wicd/daemon: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)
ERROR:dbus.proxies:Introspect error on :1.70:/org/wicd/daemon: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)
ERROR:dbus.proxies:Introspect error on :1.70:/org/wicd/daemon: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)
Importing pynotify failed, notifications disabled.
Has notifications support False
Loading...
Connecting to daemon...
Can't connect to the daemon, trying to start it automatically...
Connected.
warning: ignoring exception org.freedesktop.DBus.Error.ServiceUnknown: The name :1.70 was not provided by any .service files
warning: ignoring exception org.freedesktop.DBus.Error.ServiceUnknown: The name :1.70 was not provided by any .service files
Importing pynotify failed, notifications disabled.
Has notifications support False
Loading...
Connecting to daemon...
Can't connect to the daemon, trying to start it automatically...
Connected.
warning: ignoring exception org.freedesktop.DBus.Error.ServiceUnknown: The name :1.70 was not provided by any .service files
(firefox:30931): GLib-WARNING **: g_set_prgname() called multiple times
Registering '@mozilla.org/module-loader/python;1' (libpyloader.so)
Registering '@mozilla.org/network/protocol/about;1?what=python' (pyabout.py)
(Terminal:32576): Terminal-WARNING **: Unable to load terminal preferences.
(firefox:1968): GLib-WARNING **: g_set_prgname() called multiple times
(Terminal:5816): Terminal-WARNING **: Unable to load terminal preferences.
(Terminal:9027): Terminal-WARNING **: Unable to load terminal preferences.
(Terminal:9027): Gtk-CRITICAL **: gtk_widget_realize: assertion `GTK_WIDGET_ANCHORED (widget) || GTK_IS_INVISIBLE (widget)' failed
(Terminal:9027): Gtk-CRITICAL **: gtk_widget_realize: assertion `GTK_WIDGET_ANCHORED (widget) || GTK_IS_INVISIBLE (widget)' failed
(Terminal:9027): Gdk-CRITICAL **: gdk_drawable_get_screen: assertion `GDK_IS_DRAWABLE (drawable)' failed
polkit-gnome-authentication-agent-1: Fatal IO error 11 (Resource temporarily unavailable) on X server :1.0.
firefox: Fatal IO error 2 (No such file or directory) on X server :1.0.
Thanks,
Munky
Last edited by munkyeetr (2010-01-13 20:26:51)

In bashrc try something like
[ -z "$DISPLAY" ] && startx && {sleep 5; DISPLAY=0:0 setsid Guake; }

BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?

Hi All.
I have this request.
BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?
We have jobs scheduled on BODS running smoothly and absolutely fine.
But to check, i am logging into the admin console and check for the jobs status.
I would like to have an email to be received from BODS after each job is finished.
It could succuessful. Or it could fail.
Whatsoever, i wish to receive an email alert as soon as a job is finished.
Can anyone advise me as to whether this could be made possible.
And if yes, how this could be done.
Thanks for your help in advance.
In BOE CMC / for webi / schedule / we find an option to send email for a job success or a job failure.
Is there any option similar to that in BODS ?
Also would like to know :
how to use the smtp_to or mail_to functions ?
how to set up the smtp server for this ?
thanks
REgards
indu
Edited by: Indumathy Narayanan on May 31, 2011 3:47 PM

Hi.
Since am new to this BODS. I need some help.
I already have many jobs which are running absolutely fine.
And when a job runs, and finishes, am able to see the trace saying
e.g. :
Job_abc is completed successfully.
We got the smtp service activated for our test server.
and we hae a group email id.
I have put the details of the smtp server / ip address / and said apply restarted.
The i created a simple test script as below :
print (' Before email ' );
smtp_to('abc@company_name.com', 'Job ' || job_name() ||' on ' || host_name() || ' has FAILED',
' the job has failed', 0, 0);
print('After Email ');
It does send a email to as per smtp_to whatever email is specified.
But how to differentiate between a job success
And a job which has failed.
I wish to have a mail which says on the subject :
'Job ' || job_name() ||' on ' || host_name() || ' has completed successfully'
==> IF it is a success
OR
'Job ' || job_name() ||' on ' || host_name() || ' has failed'
==> if it has failed
How to make the system identify, whether
to send a success message or a error message whatever
Could anyone advise.
thanks
indu

Configuring Cisco TFTP Server for CUCM

Hi,
I currently have a Publisher and two Subscriber (v 6.1.3), I have now gone over the magical 1250 devices where Cisco recommend a standalone TFTP server.
I understand to deploy it I need to add it to the Publisher as a Server and then once up and running enable the Cisco TFTP service, then update the Option 150 address in my DHCP scope to point towards the new TFTP server.
A couple of questions, does the TFTP server need the following installed at the same level as the Publisher/Subscribers:
Dial Plans
Device Packs
Locales
Thanks and any other comments appreciated.

Hi Ian,
- By architecture, the TFTP server would be the one pushing out the firmware load and to the phones - so you would need your device packs, containing the bundle of firmware loads, to be on your standalone TFTP server.
- locales install files which the phones get from the TFTP server, such as their dictionary - so you would need locales on the standalone TFTP server
- Dial plans are files used by the CCM binary file. If you are not planning on running CCM service on the server ever, you don't need to install dial plans on that server. However, as best practice, it is good to have dial plans, locales and device packs uploaded on this standalone TFTP server, in case the server roles were adjusted at a later point in time.
- Sriram
Please rate helpful posts !

OSX Server DHCP Service - Support for tftp-server or bootp-server entries

We have a bunch of IP phones that get their initial setup from DHCP. On a Linux box, we can add the entries:
option tftp-server-name
or
option boot-server
We do this to tell the phones where to download their settings/firmware from. Does OSX DHCP support this? If so, what entries do I have to put in NetInfo/config/dhcp to make this work??
Thanks!

Personally I never got that dirty and fiddled aroung os x's bootpd but as you can read in its man page:
Regardless of whether bootpd knows the type of the option or not, you can always specify the DHCP option using the data
property list type e.g.:
<string>dhcpoption128</string>
<data>
AAqV1Tzo
</data>
that could be possible.
see man bootpd
-Ralph

Cant access serviceability from one CUCM server to the next

If I log into my pub and serviceability, I try to access my other subs. I keep getting an error when trying to access the other servers from the drop down list. Although, everything is replicating throughout the cluster, I can log into another CUCM and only use serviceability for that one server also.
Im going to do a reset tonight on the cluster. the logs are clean and clear on RTMT on all servers. It's very odd. I thought maybe a security password would be wrong, but there are no errors anywhere on any server in the cluster.

Hi,
there is a bug associated to this issue
Unified Serviceability Tools can not connect to other nodes
CSCud67438
Description
Symptom:
Cisco Unified Serviceability pages Tools -> Service Activation or Control Center Feature or Network Services can not connect to other nodes in the cluster.When another node is selected the Status indicates Connection to the Server cannot be established (Unknown Error)
Conditions:
CCMService Tomcat logs indicates the following error message when attempting to connect to other nodes in the cluster,
{http://xml.apache.org/axis/}stackTrace:javax.net.ssl.SSLException: Certificate not verified.
Workaround:
We have the following workarounds
- Accessing SUB serviceability pages directly
- Restarting tomcat on PUB ( once ) after the upgradeFor SNMP configuration where same Community string needs to be added or modified on all nodes, again using a Subscriber node instead of the Publisher also seems to work in this case.
regds,
aman

Connect Azure Pack to Service Bus for Windows Server with Custom DNS

Hello! I'm trying to configure Azure Pack to use Service Bus for Windows Server 1.1 with Custom DNS.
All runs on one virtual machine (Windows Server 2012 R2) in Windows Azure.
I following this post:
roysvork.wordpress.com/2014/06/14/developing-against-service-bus-for-windows-1-1
Replace FramDNS "servicebus" to "mymachine.cloudapp.net", and create certificate:
SelfSSL /N:CN=mymachine.cloudapp.net /V:1000 /T
On Windows Azure Virtual Machine:
1.I'll set publuc DNS: mymachine.cloudapp.net
2.Open ports: 10354,10355,10356,10359,10000-10004
3.In hosts file: 127.0.0.1 mymachine.cloudapp.net
4.Create certificate:
SelfSSL /N:CN=mymachine.cloudapp.net /V:1000 /T
PowerShell:
Stop-SBFarm –Verbose
Set-SBFarm -FarmDns 'mymachine.cloudapp.net'
Update-SBHost –Verbose
Start-SBFarm –Verbose
New-SBAuthorizationRule -NamespaceName ServiceBusDefaultNamespace -Name MainRule -Rights Manage, Send, Listen
Afther that i can connect to my ServiceBusDefaultNamespace with SAS.
It's work perfect. But, When I try to create Service Bus Namespace from Azure Pack Tenant portal - in Log an Exception:
Namespace Provisioning Exception. TrackingId: . SystemId: . Namespace: SomeNamespace.
Method: Activating. Exception: System.Net.Http.HttpRequestException: An error occurred while
sending the request. ---> System.Net.WebException: The underlying connection was closed:
Could not establish trust relationship for the SSL/TLS secure channel. --->
System.Security.Authentication.AuthenticationException: The remote certificate is invalid according
to the validation procedure.
And status of namespace - Activating.
Please help!

Hi Alexander,
According to the log, it seems that the validation process of the certificate failed.
Please make sure that the certificate is installed in the client properly.
Usually, self-signed certificate should be installed in the Computer Account-->Trusted Root Certificate Authorities.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Service Account for SQL Server Agent on SQL Server 2008 R2

This SQL Server instance is SQL Server 2008 R2 (10.50.4000). We had Active Domain Service accounts created to run the service accounts for SQL Server and SQL Server Agent.
It has become company policy to alter the service accounts that run SQL Server and SQL Server Agent. Currently, both were running under the Local System Accounts. We have altered the SQL Server but we are having issues with the SQL Server Agent.
I am told by another DBA that
"The agent is requiring elevated rights. It will startup if it has local admin rights, but not with domain accounts without admin rights."
So I was wondering if anyone has come across this issue and how did they resolve it.
lcerni

"The agent is requiring elevated rights. It will startup if it has local admin rights, but not with domain accounts without admin rights."
This is completely not true. It is indeed possible to run agent as a domain account without giving it local admin. Chances are you'll need to update the local acls by adding the account to the local security groups. Please see this article for more information:
http://technet.microsoft.com/en-us/library/ms143504(v=sql.105).aspx
Edit: In addition, it'll need rights to SQL server for that account to connect and do its work. It will need to be given sysadmin:
http://technet.microsoft.com/en-us/library/ms191543.aspx
Sean Gallardy | Blog |
Twitter

Service Activation for CUCM as dedicated TFTP server

Similar Messages

Maybe you are looking for