Service activity and external activity?

1. i give materails ........want the work to be done.......................
2. All the materials and work to be done by vendor.....................
3. i want to buy materials from outside......................................
wht i will be using in first case and in 2nd case ( extaral and service acitivity) is concern .............
pls give me a very brief discription if possible .............

1. i give materails ........want the work to be done.......................
buy materials using external activity or non stock components and free issue to vendor to get the work done
2. All the materials and work to be done by vendor.....................
here I would use service activity to be able to break the down to service masters rahter than one lumpsum
3. i want to buy materials from outside......................................
internal activity with non stock components

Similar Messages

Transfering Master and Transaction data to active and non active versions

Hi Gurus,
I am planning to transfer ECC master and transaction data to APO active and simulation versions.My question is
1. Is it possible to release Master and transaction data to active and non active versions ?
2. How i need to config if i want to release Master and Transaction data in version 001?
Please let me know .
Thanks in Advance
Regards,
Raj

Hi Raj,
1) Once you create active integration models for master data and
transactional data, the data will get updated in active version 000
2) For creation of non active version use transaction
/SAPAPO/MVM
3) For copying of data from active to non active version, use
transaction /SAPAPO/VERCOP
Regards
R. Senthil Mareeswaran.

Sorting activated and non-activated songs

Hi there.
I have set my iPod to sync only activated songs, so that I can change the content from time to time. But now I didn't find a way to sort my library by activated and non-activated songs (you know, the small box left of a songs name which is usually activated). Now I begin to lose the overview.
Does somebody know how to sort the library by activated and non-activated songs?
Thanks for any help.
Regards, Chris

You can't sort by checkmarks, but you can separate your library between checked and unchecked items with two smart playlists:
1- Make a smart playlist defined as: +Bitrate > 0+, and select the options "Match only checked items" and "Live Updating". Call this playlist "Checked Items".
2- Make another smart playlist defined as: +Playlist -- Is Not -- Checked Items+ and select the option "Live Updating". This will show you all the un-checked items.

Planned Activity and Actual Activity Fields & relevenat table

Hello,
Can any one pls let me know the field and Table names for the following two fields (need for preperation of a report):
PLANNED ACTIVITY: - Production Order confirmation Planned Activity column
ACTUAL ACTIVITY: - Production Order confirmation Actaul Activity column
thanks & regards
Chaitanya Rayaprolu

Hi,
Procedure :
go to the feild(Cursor in feild) press"F1" for help ( Pop up will appear )
click on "technical help"( Icon with cross planting of hammers)
from the small popup u can get Feild name and table or Struc.
copy the feild name.
go to Transaction "se16"(Tables) enter "DD03L" ( data base table ) and press enter.
enter the feild name ( Copied earlier ) in feild name block and execute(F8) the table.
You will see all the tables and structures containing the particular feild.
This is the best solution to be self sufficient.
please close the thread after testing the solution...and appreciate your reward.
Prakash

Service Manager and external link

Hi!
I'm developing some new features in HP Service Manager and I want to know if it's possible from an entry of the menu go to an external web site.
Thanks!

Hi,
This is peer-to-peer forum, you may want to contact with the developers because this can be a closed source software. The following lists show contact points, people will help you:
http://welcome.hp.com/country/w1/en/contact_us.html
In the US:
http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Regd: Active and In-active version data of a CR

Hi Experts,
We have a requirement to compare the active (approved and created) and in-active (yet to be approved) data of an entity in a change request. For this, I have tried cl_usmd_gov_api-> if_usmd_gov_api_cr_data~get_crequest_data, if_usmd_gov_api_entity~query_entity, cl_usmd_model_ext->read_entity_data_all etc.. But all of these are not giving desired results. I need all the changed values which are yet to be approved in one ITAB or structure and all the active data in another.
So would request if any one can share any input on this.
Thanks And Regards
Pradipta K Mishra

Hi Pradipta,
MDG 7.0 SP2 offers this as an out of the box feature. In the common user interfaces you can enable the "Highlight Changes" functionaly that basically colors all fields that have been changed. Using the mouse-over on a changed field, the tooltip mention the old and new values.
In addition you can enable the BCV side panel content for changed fields. This would display all changes in a table-like view.
Refer to the configuration guides of the related MDG application for more details.
Best regards
Michael

Firefox process is starting, but no activity and no active application

I am already for long-time a happy firefox user. I rate myself as an experienced firefox user and troubleshooter. But today I got some unfixable problems, and also can not find my problem in the forums. Ony this tread is a bit related, but offers no solution : https://support.mozilla.com/nl/questions/759683
The firefox.exe process starts, loads till about 10MB in memory and than no activity. Also no CPU usage. Appears to be hang.
If I remove js3250.dll there is an error message that the file can not be found. So I guess the basics of FF are started.
The profiles are already moved to an other location. Later I uninstalled FF. Several times rebooted. Moved ALL references in program files and in my roaming user profile to a different drive and installed FF again.
Virusscan and Firewall software are disabled at the moment.
Unfortunately FF keeps responding in the same way. Only starting firefox.exe as a visible process but as application not visible. and no activity after a few seconds (ca. 10 MB in memory)
Hope the cure can be found soon. I like Chrome less than FF... Other browsers even less ;-|

''The version of Comodo I am working with is version 5.3.xxx''.
Even so, the "Comodo Safe Surf" component may still be installed from an earlier (pre 3.1o) version of Comodo. You should still make sure that you don't see "Comodo Safe Surf" in the Windows Control panel program list of installed programs.
''I forgot to mention that even safe-mode will not do anything different.''
If Firefox doesn't start, even in Firefox [[Safe Mode]], and you've already tried a
[http://support.mozilla.com/kb/Basic+Troubleshooting#w_clean-reinstall clean reinstall] (more info on that [http://kb.mozillazine.org/Uninstalling_Firefox#On_Windows here] and [http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall here]):
There are some other possible solutions here:
*[[Basic Troubleshooting#w_other-solutions|Basic Troubleshooting Other solutions]]
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Other_solutions
...including:
* ''[http://kb.mozillazine.org/Kill_application With Firefox completely closed], open the [http://kb.mozillazine.org/Installation_directory application folder] <snip> rename firefox.exe to '''firefox1.exe''' then double-click firefox1.exe. If Firefox runs without problems, it could indicate that your firewall is blocking Firefox <snip>. It may also indicate that some malicious code has targeted Firefox . Note: If [http://kb.mozillazine.org/Firefox.exe_always_open firefox.exe is always open], specific malware may have targeted Firefox if it is set as the [http://kb.mozillazine.org/Default_browser default browser]. ''

EWA reporting: Not showing User Activity and Transaction Activity

Hello everyone!
Got 3 systems in EWA reporting, 2 systems works fine i can see User and Transaction Activity with diagrams etc.
But 1 of them showing User activity = 0 and no Transaction activity also.
Any ideias to solve it?

Hi Daniyar,
I am also facing the same problem, can you let me know what sort of patches need to be applied to overcome this issue??
Regards,
BASIS.

Creating activity and populate activity journals from ext. data

We are looking to create activities and corresponding journal entries from an external database application.
The external database is SQL, and there are 30,000 data records.
What is the best approach for mass load of external data into a CRM activity.
Thanks

I don't know of a tool to use to load them. We wrote a load program that calls function module BAPI_ACTIVITYCRM_CREATEMULTI to create the activities
Hope this helps;
Brant

I dis-activated and re-activated my iMessages yesterday. In the process, some messages that people sent me were delivered but I never received them after re-activation. Is there any way to recover these lost messages?

Note: I have an ipad as well, and the messages did not appear there either.

There isn't a way but I guess you could try turning iMessages off restart the phone and turn them back on. Just have the person resend them to you.

PS subcontracting with external activity

Hi,
I have a couple of questions about "PS subcontracting with external activity" I have not found any information about this for PS subcon flow, I was looking for a subcon PS Wiki but no succeed.
The scenario is to use a external activity to a subcontractor and put the material components to deliver in the external activity and check the subcon check box. Then use the valuated project stock for holding the materials.
For material components there is an option in tab "Proc. Param" and fiel "Mat. Prov. Ind." = "Material Provision Indicator", do you know if this option can be use or be available in PS? This field is grey so I can not do anything with it, so my guess is that option use only by a BOM, could you confirm that for me?
Right now I have a problem in the system so I can not save a project when creating a external activity and use the subcon check box, this is at OSS right now. But I was wondering if I put the material components in a external activity, how will it be represented in the PO?
Will it be only one item in the PO, the service from the external activity? and inside this item will hold all my material components? this can be found in tab "Material data" -> "Components".
Please share if you have some information about this,
Regards
Jose
PS Note that this scenario is not a MM subcon

abdul,
I'm talking what you can do in the system, there is 3 posibilities I have in mind:
Alternative 1
Is when I will send all the parts, thats right separated parts to be one. The material which will be the final material, is not in my stock/company. It is a new material Im manufacturing with the help of a subcontractor.
In PS I want to create a subcontracting external activity, create a PR from PS, create a PO and deliver it to the receiver in other words the subcontractor who will put it together to the final material.
For this alternative I think I have to create the material which the subcontractor will put together and have it as a head material in a BOM. The BOM will represent the parts Im sending for assembly, so when the material is deliver back to me, I will do a goods receipt of the head material.
My question is in this if I have thought this right, if you have experience of this please contact me.
Alternative 2
Is when I will send a existing material and all the parts which will be use to maintain/repair this particular material from my stock/company to a subcontractor who will do the work. This material will have the same material no. when I do the goods receipt.
In PS I want to create a subcontracting external activity, create a PR from PS, create a PO and deliver it to the receiver in other words the subcontractor who will maintain/repair the material.
For this alternative I think I can use a BOM, create a BOM of this existing material which will be maintain/repair with the parts I will send.
My question is in this if I have thought this right, if you have experience of this please contact me.
Alternative 3
This alternative is almost the same as alternative 2 with the exception that the material Im sending will change the material no when its back from the subcontractor. So I will send a existing material and all the parts which will be use to maintain/repair this particular material from my stock/company to a subcontractor who will do the work. This material will get a new material no. when I do the goods receipt.
In PS I want to create a subcontracting external activity, create a PR from PS, create a PO and deliver it to the receiver in other words the subcontractor who will maintain/repair the material.
For this alternative I think I can use a BOM, create a BOM of this existing material which will be maintain/repair with the parts I will send. Then I have to put the new material in my external activity as a material component with negative quantity as part of the subcontracting delivery
My question is in this if I have thought this right, if you have experience of this please contact me.
I hope my question is now clear for you, we are using the defence and aero solution so what I know I do can use the subcontracting with valuated project stock

What is diff b/w pick and switch activity in bpel?

what is the difference between pick activity and switch activity in BPEL? example Please

1)The switch activity is an IfElse with two different flows, based on a conditional expression, derived out of existing message(s) in your process.
Eg. i) Whether the salary is greater than 10,000 or not.
ii) Whether the age is greater than 60 or not.
iii) whether the department is finance or not.
2)The pick activity is an IfElse with two different flows, based on two different messages/signals, that you can expect to receive(when you are waiting for a message) from outside of your process.
Eg. i) whether you received a reply message or a timeout signal.
ii) whether you received a AddNewEmployee message or UpdateEmployee message.
The (decision for which route to be taken for) pick activity is based on the MessageType, while the switch is based on the contents in a message. The pick activity implies that you are waiting for a message, this can occur, at the start of your process or in the mid of your process. However, switch activity doesnot wait for any message, hence can only occur in the mid of the process and can not be the start of a process.
Mark the posting appropriately as "helpful" or "correct answer", if your issue is solved.

Issue with activation of the activity.

Hi,
I am not sure if this is an issue:
I checked in an activity and then activated the same through the wizard which appears while you checkin the activity.A request id got generated and i could see green signal against the request id.
But when i go to the Activation View in the Development Configuration perspective, I could still see this activity and when i right click on the same i get the option for activate. While i cannot see the activity in the open activites view anymore.
Is this an issue, does this mean that my activity hasnt been activated yet. Do i need to activate the activity by right clicking on the same in the Activation View. Or this happens generally. Also i cannot see the activity in the Transport View.
Where in the transport view would i be able to see the activity once this has been activated . How will i release the same.
Please advise.

Hi,
The process is as below:
1) Check out the project from track of NWDI. You will have to create activity for this purpose.
2) Do modification
3) After this you have to check in the activity. Go to open activity. Select your activity. Right click it. Select check in.
4) After this automiatically one window will get open. You will be prompoted to activate the acitvity. You have to click on activate.
5) After this automatically activation request ID will be created.
6) Then you have to click on Windows --> Show View --> Others --> CMS --> Transport View
7) You have to transport by right clicking
8) Once you have completed all these Activity will be deleted from "Open Activity". Now check in is complete. To check whether check in is complete or not, try to modify the WD Application. You will be prompted to create activity. If this happens,, you are sure that your WD Appl has been checked in properly.
9) You have to provide the activity details to BASIS team. They will transport.
Regards,
Gary

External activity and service activity

I have a very basic question. How often a external activity is uniquely used that cannot be covered by an service activity. My point is that is there a business case that cannot be taken care of by service activity. External processing activity is actually a service received from a vendor, extra thing is some goods movement perhaps? Can anybody give an clear explanation of how these two are different and what difference does that make to a project.

Whereas external activity allows you to procure only one specified service, a service activity enables you to plan and procure several services and to enter data for services that has not yet been specified in detail. For this purpose you must create service specifications when creating a service activity (do search on service specification further).
This is the major difference, the rest remaining the same.
Regards,
Ammar

POC calculations of internal activity and service activities

Hi,
I need some help regarding POC.
In the scenario, I am using two activities----Internal and service.
The internal Activity is used only for scheduling and confirmation of activities. There is a work center attached to it, but there is no cost attached to it.
The service activity is only related to cost.
Now, I want to calculate the POC for internal activity similar to the MSP i.e, POC calculated at the activity level will role up to give the POC at the WBS level ( this POC will be related to the POC as per the confirmation of the work that is the actual % of completion).
To calculate the EV only the cost from the service activity will work. i.e, the actual cost which is coming from the RA Bill (ML81n) and the planned cost from the services in the service activity. So this POC will be different from the POC calculate in the internal activity confirmation.
How to map both the scenarios in the same project ?
Kindly furnish some idea.
Regards,
A. Bose

Hi Abhra,
You can use both activity types if required but I would recommed you to look up on the three types of activities so that you are able to choose the best option that fits your business requirement:
1) Internal
2) External
3) Service
You can use confirmations for both service as well as internal activities. This will help you with your POC calculation as the values will be aggregated to the WBS level. I tried to inquire from you which EV method you are using because that may assist you in determining the POC of activities (either service or internal) based on specific requirements.
Now for EV to work you need to plan cost at the activity level for fair reflection (please note that this is also aggregated at the WBS level therefore if you do not plan cost at activity level, you will however get some estimated value at the WBS) of earned value. Based on your statements, I assume that EV is being calculated for the service activity correctly (as it has planned and probably actual cost) but not for the internal activity. I'm afraid without planned and actual cost, EV cannot be calculated. Have you tried using cost from the work center (which is assigned to a cost center)? You may use activity types in the confirmations as well.
Please let me know if this is what you were looking for.
Regards,
Syed Ammar Zaheer

Service activity and external activity?

Similar Messages

Maybe you are looking for