Service Activity Number changed

While creating service Purchase Order with reference to service purchase requisition, user change the service activity number adopted from the purchase requisition. How to restrict this.

Hi,
   If you maintain the field as display only at service level, the same will be as display only for all users and you cant create PO with service number without reference documents like PR.
   If you want to restrict the service number change for only some users, then you may go for a transaction variant. You may create a transaction variant for ME21N using SHD0 transaction and maintain the service number as display only as shown below.
   Assign the variant for the required user ID's. Refer the link: Learning SHD0 with Example
   If you want to restrict the service number change, only in case the PO is created from PR; then you need to go for development and write the logic accordingly. You may check the BAdI: ME_PROCESS_PO_CUST
Regards,
AKPT

Similar Messages

One Activity Number with multiple G/L Account (service procurment)

Hi Experts,
We have a problem, we want to create one service activity number (ac03), but we want to use multiple G/L accont . (we want to open one activity number, but we want that it should behave that we have opend several activity number). How can it possible, I know only one G/L can be used for one valuation class and only one valuation class can be maintained in ac03.
How can I do this.
Regards
GR

Hi,
For same activity u cannot assign 2 different GL ac, Better U create one more Activity with little difference in Description. & assign the diff val class.
regds,
CB

TAXINN procedure - Key combination : Plant/Vendor/Service Activity?

Hi FI experts,
I wud like to have key combination for Tax conditions maintained at FV11, as per the following
Plant / Vendor / Service Activity number
Kindly revert whether the above is possible to configure or not. We are using Taxinn procedure. Itemwise/service levelwise the tax can be taken care thru FV11?
Currently i am using the following and facing issues because the activities linked to material group.
Plant / Vendor / Material Group
Please help
Thanx in advance
Srihari

With the help of SAP labs, the issue has been resolved by activating Taxes at services level in ESM.

Can't send text messages (can only recieve). How do I change Service Center Number

Hello. As my subject states, i can't seem to send text messages (but i can receive them). I'm told by my carrier that i need to change my service center number (and they provided it). I've been looking all over the phone for this option, and can't seem to find it. I keep seeing posts saying "On your device: Options > SMS > Service Center." but "service center" does not appear when i go to options>SMS text. I see the following; screen options conversation style: show names: message options priority: callback number: disable autotext: so my question is;, where do i find this?

ayall wrote:
firstly - if i'm posting in the "BlackBerry 9500 Series Smartphone" setion,
I have a bit more than 30 messages on this forum, and my experience says that many people do not post in the board that matches their device. So it's a good idea to make sure.
ayall wrote:
you can see under avatar it cleraly says "My Device: BB Storm 9530"
you did publish it in your "private information" part in your profile. But you have to configure your profile to allow people to view your private information. Here is a screenshot of what I see :
please listen to people when they are trying to help you.
A bit of politeness does not cost much either.
That being said, we will nevertheless try to help you.
Please state your OS version (4 numbers seperated by fullstops).
When you go to home screen >> options >> sms, please write down here all what is written in this page.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Service PO for more than one activity number

Hi Experts,
    I'm working on service process, my client requirement is to create a Service PO, SES and Invoice using BAPI's.
    While creating Service PO using BAPI_PO_CREATE1 with
    Item cat 'D' and Acc *** Cat 'P' and more than 1 activity number at the services level,
    service PO is getting created only for the 1st activity and not for the rest of the items.
Can you please help me in solving this issue.
Thanks & Regards
PravithaNambiar

Hi,
The profile you would need would look something like this:
Object Type: P
Object ID: <blank>
Maint flag: not checked (for display access)
Eval Path: <blank>
Status Vector: <blank> (though the system will probably set it to 12 anyway)
Function Module: <The name of your function module that returns the second pern of the current user as type HROBJECT. See standard module RH_GET_MANAGER_ASSIGNMENT for an example>
This profile can then be used to grant users access to their "second PERNR".
Kind regards,
Brent

How to remove the Mandatory indicator of Activity Number in Service Master?

Hi,
Can some one tell haw can I remove the mandatory indicator of Activity Number field in Service Master (AC03)?
Regards.

Hi,
In ACNR the number range is assigned based on the service category.
Go to SPRO - MM - External Service management - Service master - Define Service Category, please untick the check box for External Number Assignment Without Validation against the respective Service Category and save.
Now try creating a new service master using AC01, it will pick the service master No. from the internal number range maintained against the Service Category
Regards
Merwyn

Number of active processes changing periodically

In my MacBook Air I'm noticing a strange thing. Using Activity Monitor I see that the number of active processes changes periodically. Initially I see 7-8 active processes and immediately after 2 seconds the number of active processes grows to 20 or even more and after a while it changes again to few processes. Is this normal?

It depends ob the processes, obviously, but it's probably normal. The system will naturally launch an assortment of background processes to handle different tasks as they arise.

Price to be changed in the service activity after saving the purchase order

Hi Gurus,
I am doing sap project system implementation in power project. I am creating the service activity and giving unplanned services as 1000 rupees and released the project. The purchase requisition is converted to purchase order and the purchase order no is generated.
now the price of service activity is 1500 rupees and i want to edit the service activity price and in the project system price is greyed and it is not able to edit.
So pls help me how can i do edit of the price and change it in the purcahse order.
regards,
muralips

Hi Abdul,
The above query which i mentioned is of using unplanned services and what ever the price i edit in purchase order is not reflected in the network activity.
If it updates in tne network activity then my planned cost should change and at present it is not changing in my project.
so please suggest me how to get the cost updated in the network activity.
regards,
muralidhar tallam

How to change activity number screen attribute

Dear :
Can I change activity number field to "display" attribute? I find all PS config, but can not change screen attribute only for "activity number" field.

Hi Jennifer,
Please follow the steps given below:
1. Using transaction OK02 create a user profile, preferably by copying from an existing profile
2. Now go in for detailed screen of the created user profile
3.Enter status number (you can number them as 1,2,3..),status in short form (like "PROD' for "under production"),
3.Now select the status created by clicking on the left side and click "object types" at the top. Among the objects listed select "Network Header & Activity"
4.Go back to the detailed screen and double click the status. Here you select "Change activity / element number" as forbidden.
Now set this status to your network.
You can select the status profile by opening the network in CJ20N ->edit->Status->System/User Status, or by assigning the user profile to the transaction in customizing transaction:OPSC
Reagds
Muraleedharan.R

Service master number customization

how to change Activity Number optional entry from required entry in service master?

hi
go to OXA2 and make changes according to ur requerments
Reward points if helpful
Thanks and regards
Ravikant Dewangan

Hyperion Shared Services Active Directory

Gurus, i am an Essbase Developer and currently have an issue where the users in the Hyperion Shared Services Active Directory does not reflect the true number of users actually on the company network.
Whilst new employees created in the company flow through correctly into Hyperion Shared Services, those who have left the company still show in Hyperion Shared Services, even though they have been deleted from the network. Its as if newly created users synchronize perfectly into the Hyperion Shared Services Active Directory, but the deletion of users does not flow through.
Has anyone experienced this?
Thanks

Hi,
You are fecthing the user ids from Active Directory just to reduce lot of manual effort of creating native ids for all the user and also a security part its suggested to use Active Directory.
Now how can you say that id is still active in AD, the user who had left the company his id would be already inactive even though you are able to query the user and provision on his id or add him/her to a group that has provisions will not be able to login as their id is made inactive.
If you want to remove them automatically from Essbase or Shared Services automatically when their id gets disabled it wont happen as provisioning information etc lies with Shared Services and just to authenticate a valid user AD comes into picture .
If you want to eliminate users from accessing the system whose id is disabled is to change your AD configuration in Shared Services based on the inputs from your AD team such that where does the disabled id go into (ex : which OU etc..) and configure accordingly which should work.!!! now if you want to eliminate them from Essbase unprovision them/their ids and run security refresh .
Thanks
Amith

Serial Number Change

Our users here want to change the serial number of an equipment which they mistyped. I tried the option of Edit->Change Serial Number Functions->Change Serial Number in IE02. The system displayed an error saying the User Status doesn't allow for Serial Number change. Is there any config in the system where we can control for which User Statues we can allow for Serial Number Change.

Hi,
Presently your equipment must be having a user status active.
Now got to SPRO>>>Plant Maintenance and Customer Service>>>Basic Settings>>>Define User Status. or tcode - OIBS
Select Status Profile assigned to your equipment.
In that status profile double click on your status which is presently active on your equipment.
There you will be able to see reason due to which serail number change is not allowed.

How to get a service notification number for given serial number

Please, someones know how to get a service notification number based on serial number.
In our process the notification can be created as first step (IW51) or can be created starting from service order (IW32).
Thanks in advance.
Luca

Hi pooja,
actually standard service request numbers are configured in spro->crm->transactions->Settings for Service Requests->Number Ranges. here they are maintain service request,incident,problem number ranges..
so when ever your creating any service request then that number range will appear in that object id.
you have to get that object id in your custom field get_method and based on that you have to change your number..
example:
current = me->bo.
current->get_property_as_string( EXPORTING iv_attr_name = 'OBJECTI_ID' RECEIVING rv_result = lv_id ).
here you will get object_id based on that you have to write your own logic to display custom value.
" write your custom logic to populate custom field. pass that custom field value into returning parameter.
value = custom_value.
Thanks & Regards,
Srinivas.

Cin details service tax number - urgent

Hi,
In vendor master i am able to see CIN details for PAN TAN Excise and other numbers but i am not able to see service tax registration number. every time if it needs to be updated i have to go to J1ID and update.
Is there any setting through which Service tax registration number will also be available in vendor master for change.
Thank You
Sonali.

Hi,
Thanks for ur reply, but my problem is different. all users are maintained in that setting. problem is in CIN details I am able to view other registration numbers but only service tax number is not visible.
I am able to fill it from J1ID but not able to display it on vendor master.
sonali.

MM02 - Enable options change number, change overview and change documents

I am with the following problem: I enter the transaction MM02, I enter the material 1000765, I select the view "Classification". Later I access the environment option from the menu bar and options for change number, change overwiew and change documents are disabled.
How do I enable these options change number, change overview and change documents?
Regards,
Sérgio Salomã

Hi Sergio,
If we activate the change documents for classification data, then we will be able to see the CHANGE DOCUMENTS for characteristic values through CL20N transaction (CL20N via menu ENVIRONMENT --> Change Documents) or MM02.
For reference please check SAP Note 65124.
For enabling change documents for classification data in SPRO --> Cross-Application Components --> Classification System --> Classes --> Maintain Object Types and Class Types.
In this enter into MARA table entry. Inside that corresponding to the respective CLASS TYPE (say 001) enable the CHANGE DOCS check box in Classifications part (For enabling this please check SAP Note 65124). Then for this CLASS TYPE (say 001) inside the OBJECTS folder, enable the CHANGE DOCS CLASS checkbox also.
Now in MM02 and in CL20N under menu Environment --> Change Documents you can view all the changes done to that characteristic values.
Once the change documents is activated, then we can get the change documents details in CDHDR and CDPOS tables. The OBJECTCLAS may be "CLASSIFY". We can also use the "CLLA_CHANGE_DOC_CLASSIFICATION" function module to fetch the data from these tables.
Hope this helps in solving your issue.
Thanks and Regards,
Harish kumar.

Service Activity Number changed

Similar Messages

Maybe you are looking for