Service applications and services

What is the difference between services and service applications in sharepoint 2013. I am talking about
1. Application Management->Service Applications -> Manage service applications
2. Application Management->Service Applications -> Manage Services
They both are listed under service applications
Also if I create a Managed Metadata service from Application Management->Service Applications -> Manage service applications->New it
wont turn on Managed Metadata Web Service by itself during the process. So how are they tied to each other.
@R

Take a look at: http://www.harbar.net/articles/sp2010sa2.aspx
Correct, if you create a Service Application, it doesn't automatically start the service instance (as you may want the SA, but only want to run the SI on specific SharePoint servers). Where the SI runs is where the actual 'work' for that SA occurs.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Similar Messages

I have a problem with my iPhone 4s. Location Services is turned on, but off in applications and I can not change it. It's just marked in gray. What should I do?

I have a problem with my iPhone 4s. Location Services is turned on, but off in applications and I can not change it. It's just marked in gray. What should I do?

No - restrictions are not on...
and under privacy>location Services - just like before - I can´t change it here

Difference between Professional application and self-service application

hi frntz,
May I know the difference between professional application and self-service application in oracle E-biz. Why we cant able to use both at same time ?

Hi;
Please check below which could be helpful for your issue:
http://download.oracle.com/tech/blaf/specs/blafusers.html
Regard
Helios

Applications and services in CC ...

Some of the applications and services in the CC site can not be seen in CC desktop application. I have a trial account, and for example, I can not see "story plus" in CC desktop application. Does this mean that desktop application is not completely syncronized with the CC accounts? So, it seems that we can not use desktop application for doing all the jobs in a CC account ... right?
And secondly, I also can not see Lightroom 5 in CC site. LR 5 is not included in CC?

Hi AttilaHan,
Not all applications are available when using a free/trial membership. The two you cited LR 5 and Adobe Story Pro are examples. If you switched to a paid membership these become available.
Regards,
Abhijit

New Applications and Services Logs in 2008r2

I am looking to setup auditing for security group changes and I was wondering if any of the new logs under Applications and Services Logs in the Event viewer can be used for this task. Our Security logs overwrite every 30 hours or so and digging through
the backups is tedious at best. If possible can the new event logs hold this information?
Any other suggestions on how to do this simply?
Thank for your help,
Leed

Hi Leed,
Would you please let us know current situation of this issue? Just check if SenneVL's suggestion can help you.
In addition, for increasing the size of log files, please also refer to following articles.
Set Maximum Log Size
Set Log Retention Policy
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How are permissions applied between Web Applications and from Service Applications?

I'm quite confused about how permissions are applied to Content Databases in relation to service accounts. So, as an example, I have two web applications - Intranet whose service account is DOMAIN\sps_webapp_default - and My Sites whose service account is
DOMAIN\sps_webapp_social. The "sps_webapp_social" account has full control (through User Policy) to the Intranet web app.
When I go to My Sites> Sites> Suggested Links and click on any suggestions I get the below error and the site is not "followed". This Content Database sits under the Intranet web app which the sps_webapp_social has full control to.
I'm also getting similar permission issues when the account that runs various service applications tries to connect to the DB (such as workflow service). This is happening to new or migrated sites. I know permissions can be applied directly
in SQL but this can't be the way to do it?
Is there a simple reason why these permissions aren't propagating through?

I resolved my issue. I deleted the Work Management Service Application and created it again - this time, I made sure the IIS Pool (I created its own application pool) service account running this was the same as the My Site service account.
So, running under DOMAIN\sps_webapp_social. This seemed to clear up all of my permissions issues being thrown up in Event Viewer too.
My Sites really is a complicated beast... I'm getting there. Hopefully this helps somebody else!

Web Application and Java Application

Hello,
I have a standalone Java application and a web application (JSP/Servlets) that I would like integrate. The standalone app. should send some information to my web app (which is not a problem), but then the user can be at this web app. for a while and then once he sees something he likes here, he can select it which should take him BACK to the standalone application. My question is whether something like this is possible?
If so, then how do i do it.
Also the web app and the standalone app run to 2 separate machines and 2 different JVM's.
Any kind of help will be great.
Thanks

Well let me describe the scenario in detail
We have a standalone java application that is good to search for data across an enterprise database. We also have another application which is web based and uses jsp's and servlets and is good for displaying data in different ways, let's say different kind of graps. Now the user will typically search for something using the standalone application and once he finds what he is looking for, then he might say that he wants to graph the selected data using this web application. Now this part is not too difficult as the standalone app can simply POST the selected information to the web app and the web app can then plot the graph. However, the tricky part is that this web application has the capability to allow the user to select let's say a bar and then get additional info. on that bar. Now to get this additional info. the web app. must contact the standalone app and tell it what bar was selected to get the additional info.
so my concern is how does the web app contact the standalone app. or even KNOW about this web app. Also, RMI is pretty flaky and i would much rather use web services to accomplish it. If that is the only way to go that is.
Hope that helps.

I want to remove the COnlineBank, OnlineBank and csample applications from my application and web server.

How can I safely do this on Solaris? I've tried "iasdeploy removeapp" and "iasdeploy removemodule" with no luck. I want to clear all of this demo stuff out to make both the web and app server look more production like.
Thanks
Eric

Eric,
these applications are applogics which are not controlled by the
iasdeploy tool. Unfortunately, there is no tool available to remove
these applications for you. What you can do is to manually remove all
their entries, but be careful if you do that. If you remove the wrong
keys you might break your ias installation, so be warned and make sure
you backup the whole ias registry before attempting to remove anything.
Eric Coleman wrote:
>
I want to remove the COnlineBank, OnlineBank and csample applications
from my application and web server.
How can I safely do this on Solaris? I've tried "iasdeploy removeapp"
and "iasdeploy removemodule" with no luck. I want to clear all of
this demo stuff out to make both the web and app server look more
production like.
Thanks
Eric
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!--
Han-Dat Luc ([email protected])
Senior Consultant
SUN Professional Services (iPlanet)
o .
o .
O _ ____ _ _
(_) _ \| | __ _ _ __ ___| |_ TM
| | |_) | |/ _` | '_ \ / _ \ __|
| | __/| | (_| | | | | __/ |_
|_|_| |_|\__,_|_| |_|\___|\__|
e-commerce solutions
Sun Microsystems Australia Pty Ltd

HT5621 I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully und

I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully under me?

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
3. Other issues
If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

HT4718 I tried merging the empty space on my Macbook Pro Hard disk but it says that there is a problem with my disk and i need to reformat it. What should i do to keep my applications and software + files?

Hi All,
I was given a macbook pro with parallel windows, and later windows was remove but hard disk space is greyed out and could not be merge and when i run a 'verify disk' it told me to reformat my OS. The nearest service centre is real far away from me and i hope to solve this on my own. I need to keep my applications and files, how do i do so? As some of these applications was given by my company. I need help on keeping my files and reformating.
Thanks in advance.
MelC

Get an external drive and make a clone of your internal, erase the internal, set it for 1 partition (OSX Journaled) and restore the clone.

Unable to see planning application and dimension menus under navigate tab

Dears
Unable to see planning application and dimension menus under navigate tab in EPM 11.1.1.1 workspace.
Is there any configuration lost?
All EPM service have already started.
Thx
Hector

I also don't see the menu under "Consolidation" or "Planning" applications. I can naviaget to these applications from Navigate -> Application ->Consolidation or Planning and I see a box with up arrow and down arrow. If I keep my cursor between these two boxes, or the boundary, sometime I could start my applications in these two modules. I checked context.properties in \Hyperion\home\deployment\Tomcat5\workspace\webapps\workspace\conf folder.
#Appended properties
#Sat Jan 17 14:14:43 EST 2009
Reports=Y
HFM=Y
HPSU=Y
HP=Y
HPS=Y
Analyzer=Y
BPMA=Y
ChangeManagement=Y
Subcontext.properties file is as follows:
Analyzer=WebAnalysis
Reports=hr
HMB=metrics
HPS=HPSWebReports
HFM=hfm
HP=HyperionPlanning
BPMA=awb
HFM-version=9.3.1
HP-version=9.3.1
HPS-version=9.3.1
HMB-version=9.3.1
BPMA-version=9.3.1
# Parameters for all contexts
#KeepAliveInterval=10
#SessionTimeout=30
#logon=bpm.logon
#startup=cds.mode
I also removed # character in the last four lines but I cannot see my aplications under "Consolidation" or "Planning.
This is in Hyperion 9.3.1 environment all my websites are working. Workspace, Shared Services etc. I checked all my servies and they are working ok.
http://lewisxphub:19000/workspace/index.jsp
Any Ideas?
Thanks
Jay
Edited by: Keerthi on Jan 29, 2009 4:31 AM

How can i improve speed of my application and reduce data transfer time ?

Hello,
My web application is adobe flex application which is build in flash builder 4.0 and use flex 4.0 SDK.
I am using asp.net web service and cairngorm architecture in my project.
Front : asp.net c# web project
Middle : asp.net c# web service
back : MS Sql server 2005
When i run my applicaiton then i show that data transfer time between USA server to Indian client is so huge.
Please suggest me all solutions approach so i am increase the speed of my application and reduce data transfer time.
And please let me know how all approaches is reduce my data transfer speed.
Thanks,
Mohit.

Hello,
Thank you for your response,
If i am using remote object insted of web services, can this will increase my application speed i
It is big change so please give me guidance.
My application have different type of request, some are very small request and transfer little amout of data from server to client, some request are send very huge amount of data from server to client .
I am using JSON from data transfer in my current web service.
Please provide some guidance on this.
Thanks,
Mohit

What can be done when applications and game fail to open in sonyericsson k550i?

what can be done when applications and games fail to open in sonyericsson k550i?

http://www.sonyericsson.com/cws/support/mobilephones/downloads/k550i?cc=gb&lc=en If this only happens with games/apps installed on the memory card but not with the ones in the phone memory, back these up on the PC and format the card.Otherwise, run the update service and failing that, try a master reset, remembering to back up your phone on PC/PC companion first.

Material for CROSS APPLICATIONS and NETWEAVER

Hi all
can u give links to sites that have good material on CROSS APPLICATIONS and NETWEAVER.
Regards,
Navaneeth

Hi,
NetWeaver is an application builder from SAP for integrating business processes and databases from a number of sources while exploiting the leading Web services technologies. Part of the company's mySAP product group, NetWeaver is getting a lot of industry attention as the first fully interoperable Web-based cross-application platform that can be used to develop not only SAP applications but others as well. NetWeaver allows a developer to integrate information and processes from geographically dispersed locations using diverse technologies, including Microsoft's .NET, IBM's WebSphere and Sun's Java technologies.
NetWeaver has been tagged as a product that could help spur industry adoption of Web services. Although Web services are often seen as the development model of the future, the implementation rate has not been high, often because of competition and incompatibility between enabling products
We have a forum itself for Netweaver.
https://www.sdn.sap.com/irj/sdn/collaboration
1. http://searchsap.techtarget.com/searchSAP/downloads/Joshua_Greenbaum_Talk_818.ppt
2. http://www.sapgenie.com/netweaver/
3. http://www.sap.com/solutions/netweaver/index.epx
4. http://www.sap.com/solutions/netweaver/components/portal/index.epx
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/nw/sap netweaver for dummies chapter one.pdf
/people/dominic.uliano/blog/2004/05/31/sap-netweaver-for-dummies-why-youre-not-a-dummy-for-reading-this-book
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/nw/sap_netweaver_for_dummies_ch13.pdf
https://www.sdn.sap.com/sdn/search.sdn?contenttype=url&content=/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fSDN!2fiViews!2fWCM!2fcom.sap.sdn..wcm.search.search_adv_0%3FSearchVisible=false%26SelectedCustomProps=sdn_product(value=SAP Netweaver)%26SearchPluginName=sdn_library
Books: SAP NetWeaver for Dummies
Hope it helps you.
Regards,
Anjali

When attempting to download, in the Launch Application panel, it says ..."this link needs to be opened with an application" and shows send to "CC URI Handler", but also Choose an application. How do I get past this point, as neither option seems to work?

When attempting to download, in the Launch Application panel, it says ..."this link needs to be opened with an application" and shows send to "CC URI Handler", but also Choose an application. How do I get past this point, as neither option seems to work?

Code 6 & Code 7 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Frequent random software crashes taking out files, applications and OS

We are a small niche publishing company with a network of 9 Macs of various ages - some very new running 10.6.3 and others older (mini macs running 10.5). We run MS Office (2004,2008 and 2011), Extensis Suitcase (Fusion) and QuarkXpress v8.
About 6 months ago one of the Mac users (running OS 10.5) complained that his Microsoft User Data folder had moved. I moved it back but everything then went downhill from then on. One by one all the Macs became corrupted in some way, and they nearly always followed the same pattern. Firstly files or folders on the desktop go missing (not in trash) then Extensis Suitcase and QuarkXpress become corrupted. Quite often Word or Entourage fails too. On many occasions the OS has also become corrupted so I have to reinstall everything.
This now happens on a daily basis, although 2 or 3 of the Macs seem to have settled down and have not played up for some weeks. As you can imagine we have wasted a tremendous amount of time and energy on this. We employed the services of an IT specialist who cannot work out what the problem is. He thought it was a file-sharing problem and installed a Mac Server but it has made no difference.
Someone in an online IT forum suggested that if we have a Quark document that keeps getting over-written (which is the case with us) then it has probably become corrupted and it corrupts whatever is stored near it on the hard drive, so could quite easily take down applications and the OS. This seemed logical and I asked the department to build new pages from scratch and banned them from opening the old pages. This has made no difference.
QuarkXpress themselves said that Quark can crash if you edit and save a document which was created in an earlier version of Quark. Well, Quark crashes all the time and seems to be the worst piece of software ever written in my opinion, but it shouldn't wipe out your whole computer, should it??
I had also suspected a virus and put Kaspersky on a couple of the most-used Macs for a while but it didn't find anything so I didn't bother reinstalling it again when I next had to do a re-install of the Macs.
I am now suspecting it could be something to do with MS Office 2004. I have some older Mac Minis which should be running it fine (but don't) but it has also been loaded on a few of the more modern iMacs running 10.6. I notice the two Macs running 10.6 which have "settled down" and haven't played up for weeks run Office 2008 and 2011.
I am also posting this problem to Microsoft and Quark in the hope that someone somewhere has experienced this before and can come up with a solution.

The theories that best fit your description are (1) sabotage and (2) defective third-party software.
As for (1), check your logs carefully for evidence of unauthorized access, either remote or local.
As for (2), look for anything you installed on all the affected hosts that runs as root or includes a kernel extension. Commercial "anti-virus" software would be a prime suspect.
Verify the directory of the startup volume of each client in Disk Utility (you can do this via a remote shell with diskutil.)
+QuarkXpress themselves said that Quark can crash if you edit and save a document which was created in an earlier version of Quark. Well, Quark crashes all the time and seems to be the worst piece of software ever written in my opinion, but it shouldn't wipe out your whole computer, should it?+
No, it shouldn't and it can't.

Service applications and services

Similar Messages

Maybe you are looking for