Service Auto PO
HI
when I create Service (item cat D) auto PO by ME59N,iam facing issue " Please maintain service or limt" i maintained sevice line item.
1) i checked auto po in vendor master
2)i maintained info record.
Hi,
With all setting ,for Service auto- PO, you need to activate Automatic Purchase order creation for Service requisitions in t.code: ML91 For more please Check Note : 635511
NOTE: Create info record based on Material Group/Service Group as for Automatic PO , info record is mandatory
Regards,
Biju K
Similar Messages
-
HI
in sharepoint 2013 WFE servers event viewer i receive following error many times
Log Name: Application
Source: Microsoft-Windows-IIS-W3SVC-WP
Date: 4/14/2015 2:23:56 PM
Event ID: 2303
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: TSharepint2013.test.com
Description:
There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'. Some application services may not have been processed correctly. Please check the configuration for application
service auto-start for the application(s) assigned to this application pool. The data field contains the error code.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
<EventID Qualifiers="32768">2303</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-14T11:23:56.000000000Z" />
<EventRecordID>183840</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security />
</System>
<EventData>
<Data Name="ApplicationPool">SecurityTokenServiceApplicationPool</Data>
<Binary>02000780</Binary>
</EventData>
</Event>
adilHI
in sharepoint 2013 WFE servers event viewer i receive following error many times
Log Name: Application
Source: Microsoft-Windows-IIS-W3SVC-WP
Date: 4/14/2015 2:23:56 PM
Event ID: 2303
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: TSharepint2013.test.com
Description:
There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'. Some application services may not have been processed correctly. Please check the configuration for application
service auto-start for the application(s) assigned to this application pool. The data field contains the error code.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
<EventID Qualifiers="32768">2303</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-14T11:23:56.000000000Z" />
<EventRecordID>183840</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security />
</System>
<EventData>
<Data Name="ApplicationPool">SecurityTokenServiceApplicationPool</Data>
<Binary>02000780</Binary>
</EventData>
</Event>
adil -
Disabling service auto-discovery
a client has a 10.5.x server that was "converted" to an advanced config from standard.
it seems whatever determines service auto-discovery for clients is still active, and i need to disable this feature. so, for instance, when a user logs into client machine, ichat, ical, and mail automatically configure themselves with accounts, even though the details may not be correct.
how do i disable this?
thanks for any help.replying to myself…
i think this might be it, but can anyone confirm?
in wgm, there's a ServiceConfiguration record. the relevant bit looks like this:
<dict>
<key>IsStandardConfig</key>
<true/>
i'm guessing changing that key to false will prevent clients from automatically discovering and configuring services, correct? -
Changing cloud services auto scale weekends
hi
i want to change the default weekends in the azure auto scale ( our weekend is from Friday to Saturday ).
can it be done using the portal or in any other way ?hi,
>>( our weekend is from Friday to Saturday )?
Base on my experience, if your weekend has two days, you could set weekend by selected the prior time zone .
About customize the weekend time, it may be difficult on azure portal.
Another way, I suggest you could try to auto scale could service by customize time using the Windows Azure Monitoring Services Management Library . I recommend you could refer to this code sample about how to use this library (http://blogs.msdn.com/b/cie/archive/2014/02/20/how-to-use-windows-azure-monitoring-services-management-library-to-create-an-autoscale-rule.aspx
). And you also see this document (http://msdn.microsoft.com/en-us/library/hh680945(v=pandp.50).aspx ).
Hope this helps.
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Data Service Auto-Detect Return Type Error
Hello,
I am not sure if I am posting in the correct area, as this is my first post in a long time. I have an error when trying to Auto-Detect Return Type for my Web Service Data Service. The error is 'Data type "Table_type" cannot be merged with the existing one in package "valueObjects" because the property "ContentID" does not match in case.' I have configured other return types the exact same way and have tried looking in the documentation for this error as well as searching on the internet. Any help would be welcomed, Thank You.
MSPNevermind, I figured it out. If anyone else has this similar error, it means you have another variable with the exact same name only capitilized in the same return type.
-
Cloud service auto scale delay
Hi team,
We have a cloud service that have 10 worker roles, to let the cloud service can auto scale up/down, we configure the autoscale settings that if the average CPU reaches 70% and keeps last 30 minutes, new worker role instance will be created.
We also configure a email notification monitor that if the worker role average CPU reach 75% and keeps last 30 minute it will send a notification to our administrator, we receivce the notification at 2015/1/26 0:55 and 1 hour later the instances ware scaled
up, is that means the autoscale have been delayed about 1 hour , is there some best practise that avoid this kind of problem and let the instances can be scaled up immeditatly
thanks in advance.Hi,
Please have a look at this article:
http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-scale/, here is a snippet.
All instances are included when calculating the average percentage of CPU usage and the average is based on use over the previous hour. Depending on the number of instances that your application is using, it can take longer than the specified wait time
for the scale action to occur if the wait time is set very low. The minimum time between scaling actions is five minutes. Scaling actions cannot occur if any of the instances are in a transitioning state.
Hope this helps.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
EJB3 Web service - auto generate artifacts when deployed?
Hello. I apologize in advance if this question was asked already, but I was unable to find an answer.
Is there a way to tell WebLogic 10 to auto generate all of the required artifacts for a webservice (when deployed) instead of having to manually run the jwsc ant task on each web service class file?
Thanks,
MikeIt is now working
Regenerating everything form scratch made the stuff working
From my experience:
- the function you call in the web service should be available in remote and local interface
- ArrayList or [] both works. The classes returned inside the List should implement Serializable
- you do not have anything to change in the VI or any SAP file -
The table name of Mobile service auto created
Dear all
As we know the mobile service will automatically create the table in db if the client want to submit some data to cloud.
But the table name which it created depends on the mobile service name, i.e., if the value setting in "MS_MobileServiceName" in web.config file is "app1", and the table we need to create is "table1", then the table name
which it created should be:
[app1].[table1]
How to make it create a table which name is [dbo].[table1], I think that should be good, because my other app work role and website needs to access this table.
ThanksOverrule OnModelCreating:
public class Context : DbContext
public DbSet<Xxx> Xxx { get; set; }
protected override void OnModelCreating(DbModelBuilder modelBuilder)
modelBuilder.HasDefaultSchema("dbo"); -
A problem of service auto sutdown
I Install oracle10g in Redhat Enterprise 3 AS, my database sid is test,first I run dbstart, then I connect database with "sys/123456@test as sysdba",this connection is successful, the i put the command "shutdown immediate" and close the database successful, but when I put the "sys/123456@test as sysdba" command, the screen is print "insufficient priviledge".
So you connect to the database with sys/123456@test as sysdba and shut down the database. You then try again to connect with sys/123456@test as sysdba and receive the error "insufficient privilege"
Have you tried just using connect / as sysdba?
The listener cannot connect to the database when it is shutdown and you are using the listener when you attempt to connect with the @test.
Do not know why you are getting insufficient privilege, I would have expected you would have received an ORA-12514 TNS:Listener does not currently know of the service requested in connect descriptor, unless you do not have a password file. -
The listener supports no services - auto register with a non-default listen
Hi, I have this error when I check lsnr status...
$ lsnrctl status L_EST
LSNRCTL for HPUX: Version 10.2.0.4.0 - Production on 24-APR-2009 16:27:05
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias L_EST
Version TNSLSNR for HPUX: Version 10.2.0.4.0 - Production
Start Date 23-APR-2009 16:33:11
Uptime 0 days 23 hr. 53 min. 54 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u02/app/oracle/product/10.2/Db_1/network/admin/listener.ora
Listener Log File /u02/app/oracle/product/10.2/Db_1/network/log/l_est.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.142.245)(PORT=1541)))
The listener supports no services
The command completed successfully
$
I want PMON to register with a local listener that does not use TCP/IP, port 1521.
Can somebody tell me how I should procede?This is my listener.ora file.
$ cat listener.ora
# listener.ora Network Configuration File: /u02/app/oracle/product/10.2/Db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
RK/ADMIN/LISTENER.ORA = rk/admin/listener.ora
L_EST =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = myHostname)(PORT = 1541))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u02/app/oracle/product/10.2/Db_1)
(PROGRAM = extproc)
$Thanks
damorgan wrote:
Post your listener.oraEdited by: martinmorono on Apr 24, 2009 5:47 PM -
Hi experts,
I am facing a situation where i can't find the way to solve it. Let me explain it.
In Solman 7.0 some tcodes, contains tabs that prompts for a user/password in order to show the content of the tab. Seems to be that the Web Application Server or ICF requires authentication so the service that actually process and show the info do their task, so my question is, is there anyway to pre-configure those services pre-defaulting a user so that prompt automatically use the user info i gave and instantly logs in w/o asking the user?
Any advice is welcome.
Cheers,Hi there,
Which T codes are you referring to? Also, you might want to check related ICF services for activation.
regards, Sean. -
? Starting Services Auto when starting DB
I am running a 10gr2 db on Linux. I have configured a couple of services for my users to connect to the db. Is there a way to configure the services so that they automatically start when the DB is started with either SRVCTL or SQLPLUS??
I need to start the service manually using the following command...
SRVCTL START SERVICE -S ...
Any help would be appreciated...I think you can easily integrate this command "SRVCTL START SERVICE -S" in database startup script. Like you can put this command at the very end of the "start" section and it will execute at end when the DB would be up.
Daljit Singh -
Reporting Services Auto Export to PDF on a shared location with dynamic filename
Hi Guys,
I have this ERP system that is calling a url with the Document No parameter, the link automatically converts to a PDF but comes up with the OPEN/SAVE/CANCEL box however i want to automatically save to a default location...is this possible?
Secondly i need the filename to be saved as the Paramter Name and the date.pdf in the format DocumentNo- Datetime.pdf is this also possible?
Thank you in AdvanceHi Dan,
According to your description, you want to export a report to PDF using URL access. And trying to export the report with specify name automatically without prompting the OPEN/SAVE/CANCEL box. The file name should come from the parameters of the report.
For security reasons, it is not allowed to write files on a client computer (Shared folder), except for a few pieces of information in cookies.
While using URL access to export a report, the exporting process will save the file with the report’s name automatically.
In order to export the report to a specify folder with a specify name, we can send a request to the Report Server in custom application, and then receive the data from the Report Server. In the custom application, save the data to the specify folder with the specify name in server side.
Please follow these steps to archive the target:
1. Create a C# Web application.
2. In the page_load event of a page, embed the following code:
string URL = "http://localhost/Reportserver?/AdventureWorks Sample Reports/Employee Sales Summary";
string Command = "Render";
string Format = "PDF";
//We can get values of these parameters from Request object.
string paramReportMonth = "12";
string paramReportYear = "2003";
string paramEmpID = "288";
URL = URL + "&rs:Command=" + Command + "&rs:Format=" + Format + "&ReportMonth=" + paramReportMonth + "&ReportYear=" + paramReportYear +"&EmpID=" + paramEmpID;
System.Net.HttpWebRequest Req = (System.Net.HttpWebRequest) System.Net.WebRequest.Create(URL);
Req.Credentials = System.Net.CredentialCache.DefaultCredentials;
Req.Method = "GET";
//Specify the path for saving.
string path = @"C:\" + paramEmpID + "-" + paramReportYear + "-" + paramReportMonth + @".pdf";
System.Net.WebResponse objResponse = Req.GetResponse();
System.IO.FileStream fs = new System.IO.FileStream(path, System.IO.FileMode.Create);
System.IO.Stream stream = objResponse.GetResponseStream();
byte[] buf = new byte[1024];
int len = stream.Read(buf, 0, 1024);
while (len > 0)
fs.Write(buf, 0, len);
len = stream.Read(buf, 0, 1024);
stream.Close();
fs.Close();
3. Use the URL of the above page with parameters to export a report to the specify folder with specify filename.
E.g. http://<server>/custom application/export.aspx?parameterReportYear=2003¶metermonth=12&EmpId=288
Of course, we can pass other parameters with the URL such as Format.
Please feel free to ask, if you have any more questions.
Thanks,
Jin Chen
Jin Chen - MSFT -
Dear All,
Can we create auto po for services WRT outline service aggrement.
How to process please help.Hi,
Create PR WRT to outline service aggrement and then auto PO from PR.
For Service auto- PO, you need to activate Automatic Purchase order creation for Service requisitions in ML91.
Regards,
Biju K
Edited by: Bijay Kumar Barik on Jul 27, 2009 2:30 PM -
Auto start bi services on reboot
Any suggestions on the best way to auto start the BI services like OC4J, SAW, SA, Scheduler using scripting when the server is reboot? Maybe include a delay between each and check each service is up.
/apps/OracleBI/setup/
nohup ./oc4j -start > nohup_oc4j_start.out &
./run-sa.sh start
./run-saw.sh start
./run-sch.sh start
Thanks for the help!!Hi,
Have a look at the following threads.
Autostart of Services
Re: Autostart of Services
Auto Start Oracle Services didn't work
Re: Auto Start Oracle Services didn't work
Regards,
Hussein
Maybe you are looking for
-
Get the value from a selected row in a table
Hi all, My table contains a tree structure. When I select a single row, I need to get the value of a particular column. I created an action on the leadSelect of the table and gave the following code: public void onActionleadValue(com.sap.tc.webdynpro
-
Hi - I've just started using iMovie with videos (I'd done a short one with stills before, but this is mp4 shot with my little point-&-shoot camera). I download them into iPhoto and up till now I've only had a few and just left them in iPhoto and pl
-
Dear All SAP Gurus, In J1iex under total duties -TotalSCess( at header level) and under duty values at item level-SECess field is not available . Kindly suggest what are the settings required to see these field in the J1iex transaction. Thanks in adv
-
How to adjust the heigh of the table line
Dear ABAPers, I have created the smartform.In that in MAIN window i created one table. In that table i created the table line.My requirement is i want to minimize the height of the table line. How to achieve this. Thanks & Regards, Ashok.
-
Macbook pro 13in back case clicking noise when flexed? (late 2013)
Yesterday I noticed that when I put a moderate (but by no means excessive) amount of pressure on the back of the case in certain areas with my thumb, there is a very audible clicking noise produced when the pressure is released. You can also feel res