Service book are missing for BBM

hey i have a BB 9380, most of the service book to use BBM is missing on this phone, therefore i am unable to use this for BBM.
can i enter these service book manually or connect to a BB site and download it to my phone?

Hello!!
With a strong carrier network signal (e.g., not WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Batt Pull Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support...and to ensure that you are subscribed to a data plan from them that is adequate to enable the services you desire. BBM is a BB-proprietary service, requiring subscription to an adequate data plan.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

After a rebuild/repair of my photo library thumbnails are missing for RAW images.

Every few months I rebuild my iPhoto library to make sure the database stays clean and up to day. This time was different though - after the rebuild/repair of my photo library thumbnails are missing for all RAW images (Canon). Images from other cameras and jpegs are all fine. Only the events with Canon RAW images have no thumbnails.
I am rebuilding the thumbnails once again but has anyone else seen this issue? Losing thumbnails to RAW images during a rebuild?

Every few months I rebuild my iPhoto library to make sure the database stays clean and up to day.
There is no need to do this. It doesn't achieve anything.
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. It can take 3 or 4 goes for this to work

Cost and/or Conversion Rates are missing for some planning resources

Hi,
In Workplan of projects, we are facing a issue "Cost and/or Conversion Rates are missing for some planning resources". even though the schedules for the project WP is defined.
Any inputs on this is highly apprciated. Thanks !!!
Regards,
Pallavi

Did you check the Cost for all the Planned Workplan Budget Lines. Generally, this type of error comes when the Quantity is defined but the Cost is missing for any Line. Find that Planned Workplan Budget Lines and enter the Cost for them and save it.
I hope it may help you.
Regards,
Khan.

What are the essential services that are required for ensuring server is healthy up ?

Hi All,
Please advise me What are the essential services that are required for ensuring server is healthy up ?
Warm regards,
jk1510

The easiest way to find the Health report of server or workstation follow the below steps which is very much easiest way to get it done
There are a few ways to find this in Windows Server 2008.
First click “Start” and type “Generate a system health report”
Or second navigate your way to the Control Panel choose “System and Security” and choose “Generate a system health report”.
The last is to type “Generate a system health report” into the “Search Control Panel” box in the upper right hand corner of the Control Panel window.
Once armed with this data it’s easier to refute or acknowledge an issue is at hand.
BTW if you’re looking for this same thing in Windows 7 it’s there just buried a bit more.
Search Performance in the Start Menu, choose “Performance Information and Tools”, click “Advanced Tools” from the menu on the left, and finally choose “Generate a system
health report”.
Ref: http://blogs.technet.com/b/rmontee/archive/2012/02/23/generate-a-system-health-report.aspx
Exchange Queries

Important global parameters from Financial Accounting are missing for Asset

Hi friends,
When I'm trying to assign CHN Chart of Depreciation to c.Code 0319 the below error message is giving by SAP Sytem. This Chart of Depreciation is already 4 C.codes are using.
Could you pleasea provide the detailed procedure...
Error Message is:
The result of the check of company code 0319 shows that important global parameters from Financial Accounting are missing for Asset Accounting.
One or more of the following fields are affected:
Currency
Chart of accounts
Fiscal year version
Input tax indicator for non-taxable transactions
Thanks,
shafi

Hi Shaik,
The solution is in the error message itself i.e
Input tax indicator for non-taxable transactions
Firstly you have to create tax codes for non taxable transaction in TR Code FTXP for the respective company code.
Secondly you have to assign these tax codes to your company code in TR code OBCL and save
Then You can proceed and do the assignment of Chart of Depreciation to the Company code.
I think this will solve the problem.
Regards
Pratiksha
*Please assign points if helpful

I keep getting the message that my registry settings are missing for importing and burning cd's and dvd's. Why?

I keep getting the message that my registry settings are missing for importing and burning cd's and dvd's. Why?
I've completely uninstalled iTunes per the support instructions and reinstalled. But I still get the error message each
time I click on the iTunes icon. I went into iTunes support and searched for registry settings and got an error message 404.
It was no help.

Hey JWeaver208,
Thanks for the question, and great troubleshooting so far. If you continue to see this message after uninstalling and re-installing iTunes, you may need to install the device filter in the Windows registry, as outlined in this resource:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
Thanks,
Matt M.

My iTunes is telling me that the registry settings are missing for importing and burning cd's and dvd's and to reinstall. I do reinstall and it is still not there and I have at least 4 times.

My iTunes is telling me that the registry settings are missing for importing and burning cd's and dvd's. I have installed the latest up as well as uninstalled and then reinstalled a few times, at least 4. The registry settings are still not there and I cannot burn to a cd. HELP!!!

To fix registry, refer to this article:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299

How can i get the service book Anworm TCP for all Network

Hi every body BB community, I need the book Anworm TCP for all Network, because some body else saidme thath is posible recive smn/mmn and sed, using this service book.
Tanks...

Gotta say thank you — again. Sorry the posts were spread out over more than one location. I'll check and see if Third Party Software is considered a "peripheral", maybe that would have been a better single thread choice?
Definitely news we can use and the reference link is appreciated.
OT ~ We keep becoming more and more aware of how easy it is to lose one's bearings when it comes to keeping up with info tech. My husband and I are both official members of the geezer set and have been out of the work force for some years. You really do pick up so much just by being in the environment where people are using things to get work done. A couple of old MP3 players, PPC G5, and a vintage Inspiron 3800 that someone didn't want any more is about it. No cell phone, no iPod, no iPad, no home wireless network, no streaming media. Fixed income. So we do with what we can as long as we can. If we could get by without that Intel processor, we'd probably make do with what we've got. On the other hand, we've really wanted a notebook for a very long time and have to admit that needing to upgrade to accomodate my husband's project is pretty much just the "reason" we need. I really mean it when I say that we are beyond appreciative that users take the time to share info and patiently educate those of us who fall into the "slow tech" category.

Self Service Property Category missing for MSS

I have just installed the latest MSS busines package on EP7 (NW04s) SP10.
When I go to use the MSS report Launch Pad iview I find that the property category "Self Services" is missing.
I have added the pre-requite BPs (Common Parts, Project Self Sevice) but I still do not get "Self Services" in the property category - which prevents me from entering a "viewgroup" and "scenario" in the iview properties.
Any ideas - all I can think of is applying portal SP11.
I have an older portal with SP7 and it works.
Thanks
Patrick

Seems you have got right business packages, though have a look at note [1303362|https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=1303362] to confirm dependency.
"but I see that all Web Dynpro Applications specified in the technical information of iViews are missing."
Well this could be because of errorsome business package deployment, you can still check list of deployed components from SDM and if there is any error log for deployement, you should try to deploy them again(update existing components).
Hope this helps. If not then probably you should go Content Admin - WebDynpro and see list of application listed under MSS.. if those referred applications are available then try to execute them.
And last one.. if you "think" they wont run.. or you have actually tried to run MSS and none of applications are working. you should be able to run standard package without any major configuration chanegs.. so give it a go.. and see if you encounter any error.
Cheers

Visual Studio 2013 Pro - Winforms toolbox icons beside items are missing for some 3rd party vendors controls

I noticed last weekend after installing VS 2013.4 update that the Winforms toolbox, while showing all items, did not display the icons beside the items for any custom/third party Winform controls. The only icon
showing in the toolboxes are the Pointer icon. I can select and drop any control onto a project, and as soon as I move mouse into the design surface the icon shows. Neither the
builtin Winforms controls nor the WPF toolbox exhibit the same symptom. It is specific to Winforms third party controls (ActiPro and DevExpress). At first I thought it was due to the update, then I found that my laptop was
already exhibiting this symptom, running 2013.3 (I had not dropped any controls from the toolbox in the past few weeks so I did not notice).
The two machines (laptop and workstation) are running Windows 7 64-bit Professional and Ultimate, respectively. These machines are dedicated to development, and are secured, also running Norton Antivirus.
I also have VS 2010 and VS 2012 which don't exhibit the symptom, though I finally removed 2012 last night during my adventures. I had all three VS side by side, running well for months (I added VS 2013 in June). VS
2013 had been functioning well on a daily basis for the dozen or so Winforms projects and the odd WPF or MVC project.
I use DevExpress v2014 and ActiPro controls; I have been using them for years now.
I've spent 2 days trying remedies that include:
Resetting Toolbox
Removal of *.spd files in %APPDATA%, restarting VS
Uninstall Visual Studio, remove and delete of any Visual Studio remnant in the registry, Program Files(x86), %APPDATA% and %PROGRAMDATA%, reinstall.
Repeat step 3 with VS 2013.1 and .3
Downgraded .NET to 4.5.1 to match my third, correctly functioning computer (also running Windows 7 x64 Ultimate).
DevExpress has told me this isn't a problem they have seen. At first I agreed, since my ActiPro controls also are missing their icons, but then I noted that other vendor controls display fine. Not sure what else to do but to nuke the workstation and install
from OS up.

DevExpress is discussing this issue in the thread here : https://www.devexpress.com/support/center/Question/Details/T174133#comment-a98eedf1-ca54-4920-a2d6-49506ddae5b5
The small sample they provided in the thread actually reproduces the bug in my environment.
Since I cannot post screenshots here on MSDN forum (I explained above, when I try to attach pictures I
receive an error that my account is not verified). There is nothing more I can do.
This appears to be a bug in Visual Studio 2013. VS 2010 and 2012 are on the same machine and do not exhibit
the problem. It is frustrating how unresponsive Microsoft is to my issue. I am a long-time MSDN subscriber, as well as customer of multiple seats of the retail copies of Visual Studio. It looks like the only way to get attention is to pay for a incident. If
Microsoft is interested in actually seeing this bug in action, I have 2 machines that are preserved. I have installed a fresh environment on my backup PC.

Predefined tasks are missing for Workflow in ECC 6.0 ehp4

Hello Team,
I am trying to activate the WF for PR item level, but getting error messages as shown in the screen shot. Looks likes some standard tasks are missing. So, How can I activate or configure this? Please Advise.
Thanks & Regards,
Sushma

delegation is how you enhance workflow object, you create a z sub object and delegate it back to the standard object, any new attributes methods and events created for the z object will be available for the standard object.
Extending Object Types: Inheritance and Delegation (SAP Library - Business Task Management)
As for the missing tasks, this is a bit strange since this is a standard workflow, check SE03 and see that no one deleted them by mistake (the type is PDTS) if so maybe do a client copy. I don't think that you can copy the standard tasks directly. but you have a few options:
create new tasks based on the same methods and recreate the workflow (this is not a complex workflow)
copy the tasks in the other systems to new ones and transfer the copied tasks to your system. copy the workflow as well.

Preferences are missing for Time Machine,how can I fix this?

Preferences are missing from Time Machine,how can I fix this?

Please don't SHOUT!
We're all users here and you'll get more help if you give us some coherrent information.
Firstly, do you have an external Hard Drive connected to use for your Time Machine backup?
Secondly "stacks" is not a programme; it's one method of presenting folder icons in the dock, and is accessed from the 'view options' choice which appears if you click on the folder. Right-clicking the folder will go straight to the options menu.

My Kindle books are missing since the iOS7 upgrade. How do I retrieve from iCloud?

My Kindle books are not opening on iPad since upgrading to iOS7. How do I retrieve from iCloud?

If they are kindle books from Amazon then you should be able to re-download them from Amazon via the Cloud tab in the Kindle app - tapping a book in the Cloud tab should download it

My books are missing

I just logged in to read the forum and check my sales. My bookmark is to my storefront. To my suprise this is what I found and none of my books are now searchable in lulu's store. Don't think I've offended the lulu gods that I know of. Did I get hacked? Projects are all still there but books are not listed on lulu anywhere.

i get this too:
Author has not published any product.
very worrying. i've almost 30 books out. hope its fixed soon.

After upgrade from SP2010 Foundation to Enterprise, services/features are missing

Hi
I recently upgraded the SharePoint 2010 Foundation, that was installed with TFS 2012, to Enterprise. The upgrade went through. The Products and Configuration wizard ran through to 100% without errors, however there are no Enterprise services available
on the Services on server page.
The main ones that I'm missing (that I really wanted to use) are:
Secure Store
Managed Metadata
Web analytics
SharePoint Server Search
Excel Services
These ones are there (these are non foundation as far as I'm aware)
PerformancePoint services
User Profile and User Profiles Sync
Business Data Connectivity
Also the service applications for the missing services are also missing, where as the services applications for the present services are available to be provisioned.
I've tried re-running the following commands:
Psconfig -cmd helpcollections
Psconfig -cmd services -install
Psconfig -cmd installfeatures
Psconfig -cmd applicationcontent -install
I've also run that Enable upgraded features option in Central Admin that goes through the web apps/Site collections and sites and enables all the enterprise features. That did nothing.
Any ideas?

Run:
Install-SPService
That will install all services on the farm.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Service book are missing for BBM

Similar Messages

Maybe you are looking for