Service charge settlement - cannot settle Settlement Units.

Hello,
I am trying to run RESCSE (service charge settlement) for a BE. After I have run the job, the job finishes very fast (less than a minute) and shows the status as 'finished'. When I am looking at the Settlement Unit under the BE, I find that for that month (for which the settlement was run), the status shows the symbol of a lock. Nothing seems to have been settled.
When I went back to the job log to check the steps, I found that though the job has finished, it has one line which says "batch processing not possible". But when I had run RESCSE, I had run it ONLY for this BE and not as a batch. Also, it has a line that shows that a settlement id has been generated but next to it is written, successful steps: 0; incorrect steps: 1.
Can someone please guide me how to investigate this issue?
Regards,
Suvarghya Dutta

Hi ,
Reg this SCS you can settle it to Contract level only .You can not settle to pertaining to the object .
Check in the  contract u have given the participation group as BE or not.
Regards,
Mohan

Similar Messages

  • Final settlement in Service Charge settlement

    Hi Experts
    My client wants their customers to pay their bills when they have recivecd their bills. How should thisa be represented in the SAP system . The flow types available in the system are those for advance payments and flat rates. Which flow type should i adopt for this scenario?
    How should this also appear in the application side?
    Regards
    David

    Hi,
    You should acticate the service charge settlement functionality.
    1. one posts the incoming invoices on settlement units
    2. one runs the service charge settlement which distribute the costs to the rental units and invoices the tennat if he participates in the service charge settlement (which generates open items in FI)
    3. one runs the invoice processing (which is based on the open items in FI
    regards
    stefaan

  • Service charge settlement to 2 Business Partners assigned to a contract

    Please can someone explain how to settle service charge costs to 2Business partners'accounts. For example if we have a rental unit with a tenant and also a landlord of that rental unit and both are picking up costs for different service charge costs or the same service charge costs, how will these be apportioned to both of them.
    I have tried assigning 2business partners to one service contract but after running the service charge settlement, the costs were only settled into one business partner's account.

    Hi,
    please check if the functionality Condition Split, available with Enhancement Package 2 in Business Function RE_GEN_CI_1, might meet your requirement. Further information is available in the release notes of the Business Function.
    Hope that helps.
    Regards, Franz

  • Service Charge Settlement

    Hy,
    please can somebody explain me the process of service charge settlement?I don't understand how is using the settlement units and how the postings are made.
    Thank you very much.

    Hi,
    I've added an excerpt of the online documentation of RE-FX which gives an overview over service charge settlement.
    I know that are only basics but maybe it helps you to get a better understanding. If not please tell me where you need more detailed explanation.
    Regards, Franz
    Purpose
    You use service charge settlement to distribute apportionable costs that arise during a particular settlement period to the tenants.
    Process Flow
    Below is a description of the processes involved in service charge settlement.
    I.    Master Data for Settlement Unit, Rental Object, and Contract
           1.      Enter measurements in each participating usage object.
           2.      Assign the usage objects to a participation group for each business entity.
           3.      Create a settlement unit for each service charge key, and assign the rental objects participating in the settlement to this settlement unit using the participation group.
    If costs for more than one settlement unit were jointly invoiced, you must create a master settlement unit.
           4.      The settlement participation is automatically generated for each contract. However you can define exceptions in each contract.
    II.   Incoming Invoice Posting
    Account assignment of service charges is made to the respective settlement units or master settlement units in the Financial Accounting (FI) component. The settlement amount is transferred automatically to the correct settlement period by means of the settlement reference date.
    For postings with extended withholding tax, only advance payments posted as revenue are considered for the conditions relevant for service charges. The system does not support special general ledger processes with withholding tax. The standard withholding tax term is often used during service charge settlement. You can determine the term from the conditions only in the Transfer Posting Advance Payments Debit Balance settlement mode.
    III.  Execute Service Charge Settlement
    Execute the service charge settlement run at the end of the settlement period:
    ·        Advance payments are transferred in a batch input session.
    ·        There are several steps involved in the settlement. You can save each step (except posting) and call it again.
    ·        The results of settlement can be posted directly to Financial Accounting.
    For more information on performing service charge settlement, refer to Simulating and Executing Service Charge Settlement.
    Result
    Depending on how you set it up, the service charge settlement performs the following activities:
           1.      Calculation of total costs for the settlement period for each service charge key
           2.      Cost apportionment to the relevant contracts or rental objects
           3.      Posting of cost shares to tenant accounts
           4.      Determination of the advance payments (actual payments) made by the tenant for which credit transfer postings are made

  • Commitment Line Item report - BE and Settlement Unit issue

    Dear experts,
    Request your kind help.
    This is with respect to viewing the commitment line item report in ECC 6 for RE-FX master data objects. There are two scenarios.
    Scenario 1
    Purchase requisition (PR) is created with a business entity (BE) as an Account Assignment object. After the PR is released the same is used to create a Purchase Order (PO). After the PO has been successfully created, I am running the Commitment Line Item report (REISCOLIBD) giving the BE number as a search parameter. The report shows perfectly the PO and the amount of commitment.
    Scenario 2
    Purchase requisition (PR) is created with a BE as a Account Assignment object. Further to that under the Settlement section, inside the RE Obj box I am also specifying the Service Charge Key, the Settlement Unit and the Ref Date. After the PR is released the same is used to create a Purchase Order (PO). After the PO has been successfully created, I am running the Commitment Line Item report (REISCOLIBD), again by mentioning only the BE number as the input parameter. This time the report does not show the PO at all under commitment line items and instead gives the message "no line items were selected". But here is the catch. When I am running the transaction KSB2 and I am clickng on 'further selection criteria' and then 'Ref Doc num' and then typing the PO number and then running the report, it shows the result perfectly.
    Can someone please tell me why in the second scenario, the transaction REISCOLIBD is failing to capture the data related to commitment line items?
    Please refer to Note 1271310 to see how to adapt the transaction REISCOLIBD to suit the needs for Commitment Line Item report.
    Regards,
    Suvarghya Dutta

    Hello all,
    I have been able to find the answer. As of now Commitment Line Item report for any master data for service charge settlement does not exist and and as such wont be available.
    Kind regards,
    Suvarghya Dutta

  • Customer service Order settlement

    Resource related billing.
    I created a Service Order. I finished all the steps from Create Order to Billing VF01.
    Next Service Order Settlement. I did not activate Profitability. I freezed the settlement profiles and allocation structure.
    I configured the settlement to Sales document item.
    I cannot settle the order. if I give Sales document also in settlement rule order is not accepting.
    Suggest.

    Error message.
    Maintain the settlement rule of the sender.
    I have maintained the settlement rule. I have assigned a settlement cost element  to receiver category as SDI.
    I got the error message when i do settlement.

  • Assiging wbs element as settlment receiver in service order settlement

    Hi PM CS Experts.
    We are using scenarios of creation of service order from sales order. So whatever cost we incurred for service order settling to sales order via settlement rule - settlment receiver is Sales order i.e. SDI. We are using settlement profie XX which have default object type for settling SDI.   While releasing the service order the settlement rule created with settlement receiver is SDI.
    Now for different business scenarios, we are settling service order cost to WBS. Now we want to create a settlemetn rule for WBS, settlement receiver will be WBS element,  while saving the service order.  What configuration, master data or processes we have to follow for this.
    please reply on this.
    regards
    abhay

    Sales Order line item have account assignment WBS element. From this sales order line, a service order will be created.   So our idea is whatever cost booked to service order should be settled to wbs element instead of sales order.  
    also in location tab of service order, the wbs element from sales order is not inherrited in account assignment section.  Why this we are not knowing. Have you have any idea for this.
    regards
    abhay

  • Service Order Settlement - assigned to PSG

    Hi,
    I need a help regarding Service Order Settlement assigned to Profitability Segment.
    Currently, in our system every item of SD Invoice posts revenues and COGS to profitability segment (PSG).
    Main characteristic of PSG are: Customer, Product, Division, Profit Center.
    We have implemented CS module using in Car maintenance service.
    And now in CS module it is not possible to get PA document automatically after an invoice posting so we have to settle Service Order to PSG.
    But Settlement rule for Service Order is not on item level (per every material-product separately).
    We wants to have the same rules (per Product char.) for Service Order as we had so far in SD.
    Is it possible to customize Settlement rule of Service Order on item level?
    For instance according to an Invoice items from document flow:
    Thanks,
    Zoran

    Resolved

  • Participation group AND settlement unit in real estate module

    Hello,
    i want to create Participation group (transaction RESCPG) and Settlement unit (transaction RESCSU).
    Is there any bapi or standard lsmw object to create the 2 objects ?
    thanks for your help.

    self solved using :
    BAPI_RE_PG_CREATE to create participation group.
    and
    BAPI_RE_SU_CREATE to create settlement units.

  • Service Order settlement

    Hi,
    I need to set-up settlement of a service order. Can anyone tell how to go about it? To which elements does usually a service order settles? Primary/Secondary, is secondary the how does it get posted to G/L ?
    Thanks,
    Pankaj.

    hi pankaj..
      Settlement takes place through settlement rules you have created for the order.The costs are initially collected on the order. They are then transferred to the settlement receiver (Fixed asset ,Cost center ,WBS element,Order ,G/L ccount ,Material ,Asset under construction etc)specified in the settlement rule.
    You can settle an order if:
    1.It is released
    2.It has the status Settlement rule created
    3.Costs collected for it have not yet been settled
    4.A business completion has not yet been performed for it
    Creating a Settlement Rule Manually
    Call up the order in change mode.
    Choose Settlement rule.
    The following cases can occur:
    If a settlement rule already exists for the order, you reach the screen Maintain Settlement Rule: Overview directly.
    Check the settlement rule.
    To change it, go to detail data on the Maintain Settlement Rule: Distribution Rules screen, where you can make additional entries.
    If a settlement rule does not yet exist for the order, you must first specify whether you want to maintain the settlement rule with or without the system proposal for the distribution rule. A screen appears where you can maintain the settlement rule.
    Make all the necessary entries on this screen.
    Return to the order and save it.
    I think this will help you
    kkumar

  • Vat calculation to be done on labour service charges and material price.

    Hi exeprt
    I have scenario where i required to pay vat on labour service charges nd material price.
    Calculation
    material price is  1000, in there is additional service on tht we pay service charges.
    Material price  1000
    lab service charges 12
    Vat should on on      1012
    Regard
    Nabil

    HI
    see You have your tax procedure in OBYZ t-code
    There you will have subtotal  price+excise duty as subtotal in your tax procedure your excise will zero so remain only material price
    subtotal 591  =material+service tax -statical
    592=service tax 10% on 591
    593 =service tax 2 % on 591
    594  =service tax 1% on 591
    after that subtotal 595 ==from 591 To 594 -stastical
    596===vat on 595
    Regards
    Kailas Ugale

  • If I take my Iphone 5c to the apple store to be fixed with the service charge of $269, if they can't fix it do they replace the phone? Or will I have to pay retail price for a new phone?

    I have a water damaged iphone 5c. I was thinking about taking it to the Apple store and paying the 269 dollar service charge for them to attempt to fix it. My question is: If they can't fix it, will they replace my phone for that $269 dollars, or will I have to pay full retail price for a new phone?

    They do not repair at all.
    The replace.
    The $269 is for a replacement.

  • Purchase requisition for service activity / element cannot be generated

    Dear SAP MM Experts,
    This is a service Creation from the PM order to Purchase Sercive Requisition.
    The Error Message Is Generated :Purchase requisition for service activity / element cannot be generated
    Diagnosis
         Due to the system settings, the system is trying to generate a purchase
         requisition for a service activity or a service activity element.
    No service package has been created for the activity/element.
    As a result, the system cannot generate a purchase requisition.
    The activity/element is created or released, but the indicator for
    generating a purchase requisition is not set.
    Create a service package for the activity/element and then generate a
    purchase requisition.
    regards,
    A S

    Solved From PM side

  • How can I put Service charge to receive money from customer in Sales Return

    My company will receive the Restocking fee from customer when customer want to return the goods.
    I create a Sales Return Document for sales return but I can't put the service charge to charge my customer in the sales return document.
    If there is any possibile way to create billing document for return and AR in one billing document.

    I can't put the service charge to charge my customer in the sales return document.
    Why not ??  If you dont want to show the service charge in return sale order but to show only in credit memo, this can be achieved.  Assign routine 24 in your pricing procedure against this service charge condition type.
    G. Lakshmipathi

  • Cannot load library unit problem

    Dear All,
    I am using Oracle Report builder 6 and Oracle DB is 8i.
    OS is SUN Server.
    I have the following question:
    After I modify the function in the formula column, I try to compile it. Then I got the error like:
    Error 907 at line 0, column 0
    cannot load library unit <Scheme Name>.<Table Name> (referenced by
    CF_CAL_5FORMULA)
    How to solve it? Thanks......

    Hi,
    had the same problem. Flushing the shared helped.
    alter system flush shared_pool;
    Regards
    Helmut

Maybe you are looking for