Service Code on J1B3N Help

Good Afternoon Staff
Anyone know why the report we use the registration code from the same service from SAP is not being taken to the invoice? How could we do to the service code to appear on the invoice?
The codes appear in the same so requests and the requests in the invoice but the codes do not appear.
Any help is valid

Similar Messages

Photoshop CS6 could not update successfully. Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7 Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7 Please help me figure out how to call customer service.

Photoshop CS6 could not update successfully. Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7 Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7 Please help me figure out how to call customer service. I would prefer to talk to someone directly.

Are you using any disk cleaner or optimization tools like CleanMymac or Mackeeper?
Regards,
Ashutosh

In Service contract, to change the valid form date on service code level.

Hi.
I want to change the price valid form date on service code level ( i.e. in condition) in Service contract.
I know i can do that with ME32 transaction but i have lot of Service contract with more then 10,000 line items
Is there any way that i can change in mass based on Service contract no. wise.???
Thanks in advance..
Edited by: VIKRANT HANDE on Sep 15, 2009 9:11 AM

Please check in KON* series table in SE16N transaction. I guess KOHN table may help you out. You can see other similar tables.
In any one of the table you will find validity data.

Why when I change my debit card banking details and the postal code of where I stay is rejected,yet I know it is the correct postal code?please HELP me.

Why is it that when I'm changing my debit card details and my postal address I receive a message that says my postal code is not valid?and yet I'm certain of what my postal code is.Please help.Regards,

Ztshosane wrote:
... I receive a message that says my postal code is not valid?...
Try here > http://support.apple.com/kb/TS1646
If necessary... Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

FBL3n Display with 'service code number' & description

While trying to execute FBL3n report, we are not able to see the fields Service code No. and description for the documents posted from service POs.
How can we include this field ?

There are at least two possible enhancement types to enable adding new colums/fiels to stardard ALV's, but he suitable one for Tx FBL3N should be the first one while the second would work for FAGLL03.
1. BTE 00001650:
- Enhance structures RFPOS and RFPOSX with an Include,
- Run report RFPOSXEXTEND.
- Create a Zcopy of FM SAMPLE_INTERFACE_00001650, and add your own code.
- On tx FIBF customize 00001650 event for ZFM.
2. BADI FAGL_ITEMS_CH_DATA:
- Enhance include CI_FAGLPOSX for structure FAGLPOSX
- Create an active implementation for BADI FAGL_ITEMS_CH_DATA, and add your own code at method CHANGE_ITEMS.
Please, have a look at notes 1423223, 569939, 217189, 112312, 429382 for detailed information.
I hope this information helps.
Message was edited by: Johan Baylift

Sending an EtherNet/IP explicit message with a service code of 0x45

I need to configure an EtherNet/IP Xport device and in order to do this I need to be able to lock and unlock the configuration. To toggle the lock, an explicit message must be sent with a service code of 0x45. Once the configuration is unlocked I can use the "Ethernet CIP Set Attribute Single.vi" in the Industrial Communications toolkit to configure the device as needed. However, I have not been able to find a way using the toolkit or LabVIEW to send a message with a modified service code to unlock the configuration.
Can someone either explain how this can be done with the toolkit or point me in the direction of accomplishing this using another method.
Thanks in advance,
Shane Lynch

Hi shanomack54,
I am not very sure if I understand properly your question. I am not sure if what you need can be accomplished with the Tag Write VI. I would like to send you some information that might guide you a little further, just in case I didn’t understood your question properly.
https://decibel.ni.com/content/docs/DOC-4065
http://download.ni.com/support/softlib//embedded%20networks/NI-Industrial%20Communication/ethernetip...
http://www.ni.com/pdf/manuals/374775a.html
http://forums.ni.com/t5/NI-Labs/Welcome-to-EtherNet-IP-Driver-for-Communication-to-Allen-Bradley/td-...
https://decibel.ni.com/content/thread/7483
http://www.ni.com/white-paper/10473/en/
You can always look into Help >> NI Industrial Communications for EtherNet/IP to obtain more information.
Again, I am sorry if these links don’t address your issue properly. If this is so, please reply with further information.
Thank you very much for your question.
Regards,
Luis C.

Spa8000 - Feature dial service codes are never sent

Hallo
I have an Spa 8000 which I am trying to configure. Calls and all other features are working ok, I'm just having trouble with those feature codes that require additional digits.
For example, unblock caller id (CID) for one call. The Vertical Service Activation Code for Block CID Per Call Deact Code is empty. The Feature Dial Services Codes contains *82. When I dial *82 from the device I get the secondary dial tone waiting for more digits. No matter what number I enter (eg, 10 digit number, 4 digit then #) the call is rejected with a busy signal. A wireshark trace shows that no traffic ever leaves the device.
Does anyone know what's causing this? When I dial *81 I see the *81 get sent to my proxy. When I dial *825555555555 (or a valid number) I get a busy signal no INVITE is sent. I also get the same behaviour with *67 and *72.
Thanks for your help,
Gareth

ok, granted that you want it to be handled by your SIP provider, just want to know if it works if the code is in the Vertical Service Code
this could be a possible problem between the provider and the device...unfortunately i've never really tried your set-up (i usually just let the device handle it) and i have no SPA8000 to test the configuration with
| isolate! isolate! isolate! |

Service codes issue in iPhone 4S with iOS 5.0.1

I have an iPhone 4S with iOS 5.0.1. I try to dial an operator service code (for example : *1*7#) but when i press call it dosen't respond. My operator is Vodafone Egypt. Please help.

do you really think that anyone is going to help you with your problem after all that whining and carrying on like a baby? Do you really think that others here care if you buy a non-Apple product?
Yes, it's frustrating when your device doesn't work as expected. But we're all users here volunteering our time to help others. We're not Apple.
Most will read your whiny post and simply move on.
In the future, keep your frustration and emotions, ranting and raving to yourself. Post your question simply and succinctly. That will give you the best chance of getting the answer you neeed.

DSCP (Differentiated Services Code Point) value always set to '0' for outgoing packet on win 7

DSCP (Differentiated Services Code Point)
value always set to ‘0’ for outgoing packet on win 7
I have setup – Controller (Win 7) and Responder (Win XP)
In controller I setup DSCP value to something – ‘50’ (in hex 0x32) and perform RTP call
Then I sniff packets using ‘Wireshark’ where I found DSCP value from Controller to Responder not able to set but which is able to set in packet from Responder to Controller.
Controller to Responder
Responder to Controller
When I run same application under same network, where Controller and Responder are having Win XP, then DSCP value appear in layer 3 protocol.
When I googled then learned I need to do some registry changes mentioned in below links -
http://technet.microsoft.com/en-us/library/cc758910(WS.10).aspx
http://support.microsoft.com/kb/2733528/en-us
But this solution did not help to resolve my problem.
Later I did followed changed in Local Group Policy Editor but which was also fruitless.
I do not want to set some fix DSCP value for all outgoing traffic, as my application has provision to take an input for DSCP value from user.
http://technet.microsoft.com/en-us/library/cc771283.aspx

Hi,
I'll involved another engineer who had more knowledge with your problem. Thanks for your understanding.
Roger Lu
TechNet Community Support

Security/Calls and Services Code for Pantech Hotshot

I have been trying to get assistance with this issue from Verizon on and off for more than six months, and am so disgusted by the absolute unwillingness to help me displayed by Verizon that I can't think of anything that would motivate me to continue service beyond the contract end date.
I want to be able to utilize the security options on the device to restrict outgoing calls and messages being made by an unauthorized person on my phone. This feature is standard on even the most basic phone models by virtually ALL mobile service providers.
However - when I follow the instructions to access the menu to select these settings, I am confronted with a request for a 4 digit "Calls and Services code". According to ALL printed and online information from Verizon, the default pin is the last 4 of the phone number. As I have NEVER been able to access the Calls and Services menu to ever even set up a pin, then the last 4 of phone number default should be the only possible code.
But the phone rejects that PIN. As it also rejects the PIN I established under Security/Phone Only.
So, Verizon folks - can anyone tell me WHAT THE $%# I AM SUPPOSED TO DO NOW???

Robin - thank you for the response, but unfortunately it did not work. It
reset the '"Phone Only" lock code, but I still receive the 'Incorrect Code'
error message when I try to access the "Calls & Services Code". This is
important to me because I am unable to prevent anyone who picks up my phone
from making calls, changing settings, etc by setting security measures
against it. That has been a standard feature in wireless phones for many
years now, and even the most basic phone models allow for this. So I am
perplexed about why I am unable to do so with this phone.
On Sun, Jan 5, 2014 at 8:15 PM, Verizon Wireless Customer Support <

I have tried to connect and purchase on my iTunes Store, but forgot security questions. Not even Customer service is able to help me. How can I spend the 20 bucks I have on my account now if even the phone assistants can't help me?

I tried to Purchase on the i Tunes store, but forgot security questions. Not even Customer Service is able to help me. How can I spend the 20 bucks I have on my account now if even the phone assistants can't help me? I can't rememeber any answer to any of mu questions and I can't even register my product (iPod Classic) even though I purchased it 6 months ago. Customer Service held me on the line for 30+ minutes asking me all the time if I rememeber one anwer to my questions (to which I repeatedly said no) and there seems to be no way to circumvent that security system, not even with my second email, also registered on My Itunes. Isn't there any way for me to get those 20 dollars back I already have in your store or at least reset my security questions if I don't rememeber?
Thank you very much.

qwerqsr, Please contact 1-800-My-Apple, about this issue. The account security team should be able to assist you. Please have your password and the ability to log into your account via appleid.apple.com.
Thanks,
A2Q

ITunes won't recognize my iPod. I have the Apple Mobile Device USB driver installed in my programs but it doesn't show up in my Device Manager or Services. Can someone help?

So I connected my iPod to iTunes and an error message came up saying it needed an updated version of iTunes 64 bit and I was missing the Apple Mobile Device USB driver so I downloaded it because another discussion said that was the solution. I did but it wont show up in my device manager or services. Can someone help me figure out whats wrong?

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

What's wrong with my code? please help....

when display button is clicked it must diplay the remarks but it didn't happen...
what's wrong with my code? please help
here is my code.....
import java.applet.Applet;
import java.awt.*;
import java.awt.event.*;
public class Area extends Applet implements ItemListener,ActionListener
     {Label arlbl = new Label("AREA");
      Choice archc = new Choice();
      Label extlbl = new Label("EXPENDITURE TYPE");
      CheckboxGroup extchk = new CheckboxGroup();
          Checkbox fchk = new Checkbox("FOOD",extchk,true);
          Checkbox schk = new Checkbox("SHELTER",extchk,false);
          Checkbox echk = new Checkbox("EDUCATION",extchk,false);
          Checkbox uchk = new Checkbox("UTILITIES",extchk,false);
      Label exalbl = new Label("EXPENDITURE AMOUNT");
      TextField exatf = new TextField("",20);
      Label remlbl = new Label("REMARKS");
      TextField remtf = new TextField("",30);
      Button disbtn = new Button("DISPLAY");
      Button resbtn = new Button("RESET");
      String display;
      public void init()
          {add(arlbl);
           archc.add("MANILA");
           archc.add("MAKATI");
           archc.add("QUEZON");
           archc.add("PASAY");
           add(archc);
           archc.addItemListener(this);
           add(extlbl);
           add(fchk);
           fchk.addItemListener(this);
           add(schk);
           schk.addItemListener(this);
           add(echk);
           echk.addItemListener(this);
           add(uchk);
           uchk.addItemListener(this);
           add(exalbl);
           add(exatf);
           add(remlbl);
           add(remtf);
           add(disbtn);
           disbtn.addActionListener(this);
           add(resbtn);
           resbtn.addActionListener(this);
     public void itemStateChanged(ItemEvent ex)
          {int n = archc.getSelectedIndex();
           if(n==0)
               {if(fchk.getState())
                     {exatf.setText("10000.00");
                     display = archc.getSelectedItem();
               if(schk.getState())
                    {exatf.setText("15000.00");
                    display = archc.getSelectedItem();
               if(echk.getState())
                    {exatf.setText("24000.00");
                    display = archc.getSelectedItem();
               if(uchk.getState())
                    {exatf.setText("8500.00");
                    display = archc.getSelectedItem();
          if(n==1)
               {if(fchk.getState())
                    {exatf.setText("5000.00");
                    display = archc.getSelectedItem();
               if(schk.getState())
                    {exatf.setText("11000.00");
                    display = archc.getSelectedItem();
               if(echk.getState())
                    {exatf.setText("7500.00");
                    display = archc.getSelectedItem();
               if(uchk.getState())
                    {exatf.setText("24000.00");
                    display = archc.getSelectedItem();
          if(n==2)
               {if(fchk.getState())
                    {exatf.setText("13000.00");
                    display = archc.getSelectedItem();
               if(schk.getState())
                    {exatf.setText("7000.00");
                    display = archc.getSelectedItem();
               if(echk.getState())
                    {exatf.setText("27000.00");
                    display = archc.getSelectedItem();
               if(uchk.getState())
                    {exatf.setText("6000.00");
                    display = archc.getSelectedItem();
          if(n==3)
               {if(fchk.getState())
                    {exatf.setText("6000.00");
                    display = archc.getSelectedItem();
               if(schk.getState())
                    {exatf.setText("9000.00");
                    display = archc.getSelectedItem();
               if(echk.getState())
                    {exatf.setText("15000.00");
                    display = archc.getSelectedItem();
               if(uchk.getState())
                    {exatf.setText("19000.00");
                    display = archc.getSelectedItem();
     public void actionPerformed(ActionEvent e)
          {if(e.getSource() == disbtn)
                {String amtstr = exatf.getText();
                 int amt = Integer.parseInt(amtstr);
                    {if(amt > 8000)
                         {remtf.setText(display + " IS ABOVE BUDGET");
                    else
                         {remtf.setText(display + " IS BELOW BUDGET");
          if(e.getSource() == resbtn)
               {archc.select(0);
               fchk.setState(true);
               schk.setState(false);
               echk.setState(false);
               uchk.setState(false);
               exatf.setText("");
               remtf.setText("");
Edited by: lovely23 on Feb 28, 2009 11:24 PM

Edit: thanks for cross-posting this question on another forum. I now see that I wasted my time trying to study your code in the java-forums to help you with an answer that had already been answered elsewhere (here). Do you realize that we are volunteers, that our time is as valuable as yours? Apparently not. Cross-post again and many here will not help you again. I know that I won't.

I'm new to SQL Server Integration Services and I need help on how to begin learning SSIS. Is there any training for it besides msdn?

I'm new to SQL Server Integration Services and I need help on how to begin learning SSIS. Is there any training for it besides msdn?

Check this thread where people have already given their suggestion on learning SSIS
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/f2cc1cf3-204d-454a-a189-47df87a3aa23/i-want-to-learn-ssis?forum=sqlintegrationservices
I would suggest to go for You tube videos (type learn SSIS or begin SSIS step by step) you will get lot of good tutorials to start with.
Happy Learning!!
If this post answers your query, please click "Mark As Answer" or "Vote as Helpful".

HT3702 Am having problem here I upgrade my phone 2weeks ago but if in my iTunes to download a new app it asking for security code can you help pls

I want to download a app but iTunes keep asking for security code can someone help please

What problem are you having ? Messages about security codes usually refer to the 3 or 4 digit code on the credit card that you have on your account : http://support.apple.com/kb/HT3541

Service Code on J1B3N Help

Similar Messages

Maybe you are looking for