SERVICE COMMANDS *166# NOW WORKING WELL from NOKIA

GOOD NEW FOR ALL N900 USERS ONLY YESTERDAY I UPDATED THE APPLICATION MENU OF DESKTOP > APPLICATION MANAGER . JUST GO IN > APPLICATION MANAGER > DOWNLOAD > DESKTOP > THEN MAKE REFRESH you will find program call USSD .. its already released from nokia now , no need for headache about much steps ,,, just download then install you will find it in you desktop .. then you will to add you service command number because it will give ERROR first time it work till you enter your service number by clicking on the icon appeard on desktop . "

Did the update as suggested but the USSD app is still not listed
Anyone else tried getting it this way?
Running 2.2009.51-1.205.1

Similar Messages

Lion server on Mac mini server stop responding to ssh and VNC (other services like mail, ical works well)

Lion server on Mac mini server stop responding to ssh and VNC (other services like mail, ical works well)
Version is Lion server 10.7.4
When I attach a monitor to it, I saw all the buttons and menus stopped responding too. I can only push and hold the power button on the box to shutdown.
It only started happening recently.
Anyone has any clue?
Thanks for the help in advance!!!

Found that the second hard drive is broken. I have to go to the apple store to have it replaced.
I had to press the power button to turn the server off for several times, then the broken hard drive went disappeared. After that, I had to disable the Spotlight. Then the server went back to work normally.
Now I made a CCC copy of the primary hard drive, and would like to have the server run on the external raid disk (connected through thunderbolt). Does anyone have previous experience with it? Any expectable drawback or issue with this setup?

I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel?

I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel? Is Parallel in fact the best way to go?

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Calendar entries on iphone not syncing to my macs. Syncing via mobile.me and works well from mac to phone

Calendar entries made on my iphone are not syncing in to my ical calendar on my macs. Syncing via mobileme. works well from mac to phone.

I am having a similar problem. I think that my phone actually deleted a couple appointments, as well. Today I entered a repeating event on my phone. It still has not shown up on my MacBook or my iPad, hours later. I believe it is because my iCloud Sync was turned off on my phone. I just checked - It said that my password was entered incorrectly. I think that must have happened when I upgraded to iOS6. I fixed it now and am waiting to see if my iCal sync happens.

Hi! I lost all the programs on my mac book's hard-drive. I reinstalled Mac os x snow Leopard Disc, the computer, now works well.But, I am unable to load my address book and transfer some pictures for a CD (I used to have) back to the Mac Book. Can you hel

I am trying to reinstall my programs (which I lost when my hard-drive crashed) on my Mac Book.
The unit works well, having used my mac os x Leopard Cd.
I am however, unable to load my Address Book (from a stick) and some pictures from a Cd which used to work previously on the unit.
Can you help?

I am trying to reinstall my programs (which I lost when my hard-drive crashed) on my Mac Book.
The unit works well, having used my mac os x Leopard Cd.
I am however, unable to load my Address Book (from a stick) and some pictures from a Cd which used to work previously on the unit.
Can you help?

Does Safari's Mountain Lion Now Work Well Flash and Youtube

Hi. Usually when I use youtube (Flash but I did join its HTML5 trial) on Lion's Safari 6, it would have errors. Sometimes It would play but it wouldn't move (the red line below). Sometimes I've cached a video to full by pausing the youtube video but when I play it again, it has to download or cache the video again. Youtube on Flash just messes us more (it does mess up with Chrome too and Firefox but not that often). If all's good with youtube, I guess I should buy Mountain Lion.
Thank you in advance.
Gbu.

It works well. Sometimes it has a problem, but Flash is stable

I can't seem to connect to my lion vpn, all web services I set up work well like wikis and what not. I get a security error 792 Connection attempt failed because security negotiation times out. Please help

I get error 792 Connection attempt failed because security negotiation time out. I am trying to connect a xp machine to my vpn.

I get error 792 Connection attempt failed because security negotiation time out. I am trying to connect a xp machine to my vpn.

Network service commands on my Nokia N900

Hi there!
I just acquired my N900 two days ago from a Nokia authorised dealer in Nigeria and even convinced a colleague to pick one yesterday as well.
I live in Nigeria and my GSM operator is etisalat, im presently experiencing difficulties with using service commands on my phone. For instance, when i dial *235(hash, sorry cant find the symbol on my macbook pro) to check my balance; i get an error message saying "number incorrect". Other service commands dont also work. Is there a way around this?
Its frustrating also that there is no official Nokia plugin for isync. I use a macbook pro and cant seem to find a way around syncing both devices. In the interim, I found www.salling.com very useful in transferring my media files.
Should be grateful for useful tips and hints.
Thanks
Solved!
Go to Solution.

Actually there is a way to use service commands. You have to use an app called USSD pad. Here is the instructions from santy245 on how to install the USSD pad app.
1. First, install Rootsh v1.5 download it here http://maemo.org/downloads/product/Maemo5/rootsh/
or http://maemo.org/downloads/product/Ma... to enable root access on X Terminal.
1B. download -->.deb file) put it in a folder name the folder a
2. Open X Terminal on the Nokia N900 (ITS IN THE APPLICATION MENU PAGE 2)
   type sudo gainroot  (Just like that) and press enter. (This will not work if you skip the        first step)
3. Ok now type cd MyDocs/TheNameOfTheFolder
    (include the path name of the folder you made if you made a new folder.
    I made a folder and called it a) this what I had to type cd MyDocs/a (Just like that)
   and press enter
4. Ok stop while running X Terminal open the File Manger to make sure your .deb file is where
    you said it was and rename it to ussdpad (Just like that)
5. Then go back to X Terminal type dpkg -i ussdpad.deb (Just like that) and press enter
    ok you are done go to (APPLICATION MENU PAGE 2) you should see ussd pad

Why export audio to movie command not visible and detect cuts command is not working in 64bit mode?

Does anyone know why export to audio disappear from menu in 64bit mode?
Why detect cuts command is not working well in 64 bit mode?
I tested on several machines (brand-new iMac, brand-new MacPro with 10.8 OS, MacPro with 10.6.8),and everythig wotks in 32 bit mode. As I switch to 64 bit mode detect cuts only put one marker at the begening of film.
I also noticed that Firewire output option in 64bit mode is not avaible.
Is there a certain film format that I have to use to make it work? I tried DV PAL, but I had ther same result.
Thanks a lot.

Hi
Those functions are not available when Logic is running in 64bit mode
http://support.apple.com/kb/TS3171
CCT

I am locked out of my computer (macbook air) I just got it back from the apple store and they reset it. I put in a new password, and now it doesnt let me log in anymore. Command R doesnt work, all i hear is a sound, but nothing happens.

I just got it back from the apple store and they reset it (becuase it kept shutting down and not turning back on).
I put in a new password because i needed to start over from factory settings, but now it doesnt let me log in anymore. (I don't know if this is because it doesnt accpet my password, or I forgot my password in less than 5 minutes, or because when i typed in my new password, i typed it in wrong twice)
Command R doesnt work, all i hear is a sound, but nothing happens.

What I don't understand is why it is rejecting a password I am creating.
Perhaps the password you are creating is too short, or has characters that are not allowed, or is not secure enough because it is a word in a dictionary.
FileVault may have standards for what it considers an acceptable password. If the password is part of the 128-bit encryption scheme, it might have to be 16 characters, for example. (Don't know if that is true, but it's a possibility.) Check your documentation for password requirements.

I downloaded Ringtone from iTunes into my iPhone 6 and set it as the default Ringtone. Worked well until I had to recharge my phone. Now disappearred from my iPhone but shows in Tones when phone sync'd. How do I get to show back as default Ringtone

I downloaded a Ringtone from iTunes into my iPhone 6 and set it as the default Ringtone.Worked well until I had to recharge my phone.The Ringtone has now disappeared from my iPhone and I'm left with just the Ringtones that come standard with iPhone 6. I sync'd my phone and it shows in the Tones folder. How do I get the Ringtone back as a default Ringtone in my iPhone 6. Quite frustrating!!

In iTunes, try signing out of your Apple ID & then back in: click on iTunes Store on the left sidebar of iTunes, click on your Apple ID on the top right, sign out, sign back in. Then try to sync your purchased music to your phone again.

My phone was working well. i installed some free games and after 2 days u guyz charged me $34 from my debit card. and now i can install any free apps, they keep asking to put my billing info for those. please this is urgent. i want my money back.

hello sir/madam
this is a very urgent and important question. i nedd your assinstance.
i have iphone 3g. i was working well. about 2 months earlier i bought an app of $2.99. after then every thing was okay. but last week i installed some free games and 2 days later itunes send me a reciept via email and you guyz charged me $34. now whenever i try to install free apps they want my billing info. please i need your help and want those money back.
$34 for free games , i will show u the reciept. if its not possible to get the money back i will forced to take proper action.
thank you sir /madam.

The games might be free but I think you've clicked In-App purchase which cost money. You are warned before you accept the In-App purchase. You not that young and you can read so take action if you must. It's your own fault and all purchases are final. Good luck.

NT service start of weblogic doesn't work (command line start works)...

Hi,
We have WL 6 running on NT 4, and the server installed as a NT service.
We have some servlets sitting in the DefaultWebApp directory, but when we
start the WebLogic NT service we get an ERROR 400:
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 400 Bad Request
The request could not be understood by the server due to malformed syntax.
The client SHOULD NOT repeat the request without modifications.
The log states that the default context did not load properly. Maybe about
10% of the time, everything works fine
and we can access our servlets. When the error happens, we can't even
access the console, it still gives the same error 400. Interestingly, when
I start weblogic through DOS, it works 100% of the time with no error 400!
I installed SP1 and I still get the same behavior. I tried resetting the
config.xml....but sometimes I get the reverse behavior..where the service
works all the time and the DOS method doesn't work. Could there be
something with the servlets (they're pretty straight)? Some other parameter
or setting that I'm missing? Or is this just a bug?
Thanks for any help,
Ven

This is a known bug in the Windows native convenience programs.
If you start the server with the startWebLogic.cmd script or
from your own Java command line you'll get farther.
WebLogic Server 5.1.0 isn't certified yet on the 1.3 JDK because
1.3 had not been released in production form at the time of
the WebLogic Server 5.1.0 release. Our experience is that it
works well enough to do development work. Certification (and
support for deployment) is targeted for an upcoming service pack.
Chuck Karish
Tsung-Wen Tsai wrote:
>
Does WLS 5.1 works with jdk or jre 1.3?
I looked at jdk and jre 1.3 directory and I can't find javai.dll file,
although javai DO come with jdk 1.1.6.
I got this error when starting WLS. I changed the JAVA_HOME through
wlconfig.
-Tsung
=============================
c:\weblogic>bin\wlserver
Java dll not found. Bad value for JAVA_HOME.
The system cannot find the path specified.
Java dll not found. Bad value for JAVA_HOME.
The system cannot find the path specified.
loadIt: Java DLL not found.
The Windows registry is misconfigured
for the WebLogic Server
JAVA dll not found: c:\progra~1\javasoft\jre\bin\javai.dll:
The Windows registry is misconfigured
for the WebLogic Server
Can't start WebLogic Server: (Can't start Java VM) err=0x2000001--
Chuck Karish BEA Systems
[email protected] San Francisco, CA
(415) 317-0182 (cell) (415) 364-4692

Google maps has gone away from ios6 and apple maps doesnt work well for India. Stuck ??

Apple released there own maps, and got away with google maps....Now, For lots of countries like India etc , apple maps arent done well yet... and google had a wonderful support all across lots of countries. Getting away from google maps has made us stuck with maps functional on iphone4 and ios6.
This is not working well updating ios6 and we are losing biggest use of iphone (Maps)

3 Good Alternatives for India
Google maps web app(maps.google.co.in)
Nokia maps web app(m.maps.nokia.com)
Navfree GPS Live India https://itunes.apple.com/in/app/navfree-gps-live-india/id434595644?mt=8
You can refer the below url for more information
http://ebloggergeneric.blogspot.in/2012/09/alternatives-to-ios6-maps.html

Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

That issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

SERVICE COMMANDS *166# NOW WORKING WELL from NOKIA

Similar Messages

Maybe you are looking for