Service Contract Determination for material product
Hello,
I am trying to implement service contract determination for a complaint and I observe that the service contract gets determined at the complaint item level only when I add a service type product at the item level and not when I add a product of material type. Is this a system limitation that a service contract can be determined only for a service product or am I missing some configuration? Has anyone else faced a similiar issue?
Thanks,
Divya.
hi divya
the contract get determined even after adding product of type material
1.create a srv contract (sc)
2.add product of type material
3. release the contract and save it (note the no.)
4.create a trnx complaint(crmc) maintain the setting fr contract determinition(F)
5.put the product in trnx and ur contract will get determined
see if it suffice ur requirement
"reward points if u find useful"
Similar Messages
-
Service contract determination for support messages
Hi Gurus,
I have the requirement for automatic determination of service contract for support messages created.
Which rule i should use for automatic determination of sales and service organization for the support messages
Please help me
regards
NaveenHello Solman Gurus
Please help for my issue,,, if anyone could...
Full points will be rewarded
regards
Naveen kumar -
Service contract determination for service request
Hi,
is there a way to influence the contract determination in a service request creation process?
The contract should be found if there is one for sold-to-party OR ship-to-party.
Thank you.
Kind regards
ManfredHi Manfred,
I don't know about "Ship-to arty" use in contract determination. AFAIK Sold2-Party, Sales and Service Organization, status of the Service Contract (released), Start and End date and the object list are responsible for the Contract determination. Hence if I'm not wrong a sold2-party must be provided.
There is the CRM_SERVICE_CONTRACT Badi and what we did in our process is to use the Event framework to ensure a contract redetermination after change of the sold2-party. Take a look at CRM_SEARCH_SERV_CONTRACTS_EC for ideas in that direction.
Regards,
Hendrik -
Sub-contracting purchase for by-products
Hi
I am doing Sub-Contracting PO for By- Products. I have maintianed in BOM , the by-product material code in "-ive" qty.
Consider Material A - Main Product
Material B - By_Product
Material C - Raw Material
When i do GRN, Material A triggers 101 movement Tpe, Material B triggers 545-0 Moveent Type and Material C triggers 543-0 Movement Type.
But When i check the stock of material, Material B is lying as Vendor Stock.
Kindly let me know whether this transaction and movement type updation is correct.
Else let me know the steps.
I need to Receive Material A and Material B in my Stock.
Thanks & Regards
T.Madhesh KumarHI
Thanks for u r reply. But i need to receive the material A and material B same time during Goods receipt itself. Is there any possibilities that i can receive both the material in Un-restricted stock during goods receipt.
Thanks & Regards
T.Madhesh Kumar -
No price could be determined for material/batch DWFB1.1-07GL2/ plant DAAL
Hi Gurus,
While doing GR (MB31) of Finish product DWFB1.1-07GL2 in plant DAAL, we are getting this error.
No price could be determined for material/batch DWFB1.1-07GL2/ plant DAAL
Message no. CK465
Diagnosis
The system could not calculate a price for material/batch DWFB1.1-07GL2/ in plant DAAL for valuation view 0, because none of the valuation strategies in valuation variant 007 was successful.
We kept price control for finised good material master rececord is 'V'
I assigned valuation variant 007 to the plant DAAL.
Pls. suggest the solution.
Praveenhi,
Please check same valuation variannt has been configured in order costing variant or apprearing order control data.
Did you maintained MAP for that material in material master?
Regards,
Ashok -
Hi, when I try to install SQL Server 2012 SP1 (ISO from Microsoft Download website) on a Windows Server 2012 and try to select the shared feature options:
- Reporting Services Sharepoint
- Reporting Services Add-in for Sharepoint products
They are both missing from the list.
How do I solve this? Help!Hello,
Did you download the SQL Server 2012 Express with Advanced Services edition from the Microsoft website? If so, this edition did not support SharePoint Integration mode.
Just as Alberto post above, Business intelligence features are not all available in all editions of SQL Server 2012. You can refer to the following link about support features in Editions of SQL Server 2012:
Reference:http://technet.microsoft.com/library/cc645993(SQL.110).aspx#Reporting
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support -
Service contract list for plant
Hi
How to query from a table for the Service contracts created for a particular plant.
I tried EKKO table , but could not get for a particular plant.
Can anyone guide me how to get the list.
Thanks in advance
GururajHi,
u have to join the table ekko and ekpo.
in ekpo u will get the field EBELN. u have to filter the EBELN for contract with the following value.
PSTYP (ITEM CATEGORY) = 9(SERVICE)
KNTTP (ACCOUNT ASSIGNMENT CATEGORY) = K(COST CENTER)
and from EKKO table u have to take the field
BSTYP (PURCHASING DOCUMENT CATEGORY) = K (CONTRACT)
u will get the list of service contract.
regards
jash -
Output Determination for Material movement
Hi All,
I am configuring output Determination for Material movement.
In my case, am doing the config when the movement type is 311, we want to generate IDoc.
i have configured everything, output type,output Determination schema..
When i am trying to maintain the condition record for the same through MN21,
here i am facing one problem on Partner Function.
Here what partner functuion i'll give.
waiting for all valuable response.
Regards
IndrashishHello Indrashish,
Maintain that output type as partner independent.
This will help.
Regards
Arif Mansuri -
Material, service and warranty for single product
Hai all,
I have to do a scenario like this..
I have to sold a DG set to a customer and have to maintain service and warranty for the same..
Could any one help me how to do this.
Can we use COMMPR01 for this..
Thanks in advance,
S.JenibaletYou cannot ship to an Apple store in another country - they will not
accept the shipment.
You must either take the iPhone personally to the country where the
warranty is valid or send it to a friend/relative in that country. After
repair/replacement, the friend will have to send the iPhone back to you.
All shipping and insurance costs are your responsibility.
Buy the iPhone where you intend to use it to avoid warranty problems.
Some features (especially 4G/LTE) might not work outside the country
the iPhone was meant for. KSA, UAE and some other countries block
FaceTime from the iPhone and FaceTime cannot be installed on those
iPhones even if used outside the restricted areas. -
Problem in service contract determination using spare part items
Hi experts
I created a service contract with spare parts in product list, and discont for those spare parts in price agreement. The spare parts item category group is SRVM.
If I then create a serice order and add the spare part as the item of the transaction, depends on item category I put in for the spare part, contract determination may or may not happen. If I put SRVP ( service product) as item category then the contract determin will happen. But SRVP is not allowed for the spare part product. If I use SRVM as item category, then the contract determination will not happen at all.
The questions are
Can contract determination be triggered by item category SRVM? If yes, what do I have to do to make it happen? If no, what item category can I use for spare parts to trigger the contract determination?
Your help is highly appreciated.
MingHi
Please check following link.
http://help.sap.com/saphelp_crm70/helpdata/en/c1/315dc323e64f43b1e2ff92ff077d5b/frameset.htm
Regards,
Srini -
Service Contract Determination in Follow-Up Transactions
Hi all
in our setup (CRM 2007) we can successfully create Service Orders where Contract Determination on item level takes place and assigns items to contracts. This also works for Service Confirmations, in case we create them as stand-alone transactions.
If we however create a Service Confirmation as follow-up from a Service Order, in which contract determination took place, the contract information is not contained in the Service Confirmation.
Any ideas how to get the contract information over?
Thanks!
Christian
Side note: We did not find a copy routine or copy control settings solving our problem - however we might be wrong...Hi Christian,
If the service order line items are entittled to service contract , at each item level you will get contract info in contract data tab.
when you transfer these items to confirmation , confirmation item contract data will not have contract information. Only when you enter items in confirmation manually then system will pop up window for selection contract and confirmation items get contract information.
thanks,
Nitin -
Service Category determination for Service Tax report
Hi All,
We have applied the SP18 at our client's place in which a new node of Service Tax has been introduced in IMG under Logistics. We would like to configure the Service Category under it.
Suppose the access sequence is maintained as (any suitable) :
Vendor + GL Acc + Tax code + Serv. Catg.
GL Acc + Tax code + Serv. Catg.
Vendor + Tax code + Serv. Catg.
Tax code + Serv. Catg.
We would like to know what is the significance of GL Acct. here. If anyone has used this configuration, kindly help us to understand.
Also, suppose the existing service tax codes are Plant dependant then how do we map this scenario for determining Service Tax Category.
Thanks & Regards,
JNDHi Manfred,
I don't know about "Ship-to arty" use in contract determination. AFAIK Sold2-Party, Sales and Service Organization, status of the Service Contract (released), Start and End date and the object list are responsible for the Contract determination. Hence if I'm not wrong a sold2-party must be provided.
There is the CRM_SERVICE_CONTRACT Badi and what we did in our process is to use the Event framework to ensure a contract redetermination after change of the sold2-party. Take a look at CRM_SEARCH_SERV_CONTRACTS_EC for ideas in that direction.
Regards,
Hendrik -
Service Contract Determination - Multiple sold-to-parties
Hello Gurus,
Can anyone help me on understanding this:
We know that in standard configuration, the sold-to party in the service contract and in the business transaction must be identical.
But It is possible to change someting so that we can assign a service contract to multiple sold-to-parties?
There must be a workaround to do this. Does anyone tried it?
Thanks and regards,
Bruno GarciaHello Ashwin,
We're using IC Webclient at our customer Call center. We register all contacts made in Interaction Record document, and all service requests in Service Ticket Document.
What we're trying is to define the same SLA agreement for all sold-to-parties partners. We did all configurations relationated with service profile, response profile, product and service contract.
However, SLA calculation only works if the sold-to-party partner of service ticket is the same that in the service contract. So that's why we put this question here.
We already tried to use CRM_SERVICE_CONTRACT and CRM_SRV_SLA_CALCTIME BAdI's, but no luck: they also seem to depend on this verification.
What we're trying to do is to skip this verification. We need to calculate the SLA for all service ticket, no matter what sold-to-party partner is.
Do you think this is achievable?
Thanks in advance,
Best regards -
T code for material production and production
Hi,
Could any one please tell me the *t-code* to find out monthly/ daily material wise production and consumption report in value and qty as well
Regards / Ashok vermaDear Ashok Kumar,
Check the reports,
MCP3,MCPM - for the actual production happened for a period,you can get it daywise for any product.
MCRP,MCP6,MCRE - Actual consumption of materials during a period for production.
MB51 - you can get the list of 201 movement(In case if any material is issued against cost center).
Check and revert back.
Regards
Mangalraj.S -
No price determination for Material/Plant error CK465
While calculating the cost for a material through process order , no price could be determined for input material despite the standard price of the same is being released , error message CK465.Apart from that the valuation variant and costing varaiant has also been checked and found correct. Still the error persist.
How to correct the cost calculation while creating process order ? Plz suggestHI,
Please check the Plan Costing variant (usually 'PPP1') assigned to Order ('Control' Tab) and make sure you maintained the prices as per this Valuation strategy maintained in transaction OPL1.
Hope this helps.
Maybe you are looking for
-
Color Code is not working, please help
I am using the color code 080808 from adobe photoshop as my background for my template. When i put the JPG file into dreamweaver and try to set the page properties in dreamweaver (background) to 080808 it is putting me at pure black. please help me
-
Hi Guys, when I enter MIRO the terms of payment(BSEG-ZTERM) are taken from Purchase Order and instead I want that they are taken by Vendor master data. Can I do this with a substitution,if yes how can you descrbe the principals steps? Thanks in advan
-
I use Time Warner for ISP and do not have wireless features. The modem appears to have a live link even when Firefox indicates the internet connection has disconnected. The signal strength has been checked by T-W. further, this problem predates my us
-
I am trying to control a screw elevator with labview. I have an array which holds the values for current lift position. Once the lift is at a new position I need to overwrite the old position of the lift with the new value in the array. I went thr
-
Major gaming system Migration from AS2 to AS3
I have a major project entirely in AS2. It is made of a Multimedia Application, which provides access to functions needed to load games, save information, insert *.jpg files... The 50+ games each have their own graphic.swf and engine.swf, where the g