Service control manager logging system

Hi,
is there any way by which we can configure Service control manager (SCM) in such a way that we stop it from logging certain events , to be specific start and stop of "windows event log" services. can i achieve this by command prompt or using registry
key.
Thanks

System Center Service Manager is not the same as the Windows service Manager. Consider the windows server forums?
Regardless, the default "service started" notices in the system log are configured per service, and are enabled by default. consider http://msdn.microsoft.com/en-us/library/aa984385(v=vs.71).aspx

Similar Messages

Service Control Manager - 7000

I installed Oracle Client on a Windows Pro 2000 computer. In the Event Log I received next message:
Source: Services Control Manager
ID: 7000
Failure at start of service "OracleWebAssistance0" because of a mistake. The service has not answered inquiry in due time.
I have a Oracle8i on Netware 6.0 server. In the Services list OracleWebAssistant is working.
What's the problem?
Michael S. Androsov
EXPOCENTR

Hi Santosh,
Does this issue occur in your personal computer or in domain environment?
Please take the following steps for troubleshooting:
1. Run gpedit.msc
2. Edit Computer Configuration -> Policies -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assingment -> Profile system performance
3. Add Administrators and NT SERVICE\WdiServiceHost
For more information, please refer to the following thread similar to this issue.
http://social.technet.microsoft.com/Forums/windows/en-US/e4d701f5-a63f-4fee-9b09-89ea9b07e1c3/the-diagnostic-service-host-service-failed-to-start-due-to-the-following-error?forum=w7itprogeneral
Hope it will be helpful.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.

Hi All,
I am seeing the following error for SMS_AWEBSVC_CONTROL_MANAGER component with Message ID: 8100
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
awebsctl.log file has below errors:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Management point and Application Catalog Website Point are installed on the same Server where I am seeing the error for Application Catalog Web Service Point role. Management Point and Application Catalog Website Point are functioning properly. Application
Catalog Website is working.
Thanks & Regards, Kedar

Hi Jason,
Application Catalog Web Service Point and Application Catalog Website Point; both are installed as per below configuration on same Server:
IIS Website: Default Web Site
Port Number: 80
with default value for Web Application Name configured.
For SMS_AWEBSVC_CONTROL_MANAGER component, I am getting below error in Component Status:
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
Possible cause: Internet Information Services (IIS) isn't configured to listen on the ports over which AWEBSVC is configured to communicate.
Solution: Verify that the designated Web Site is configured to use the same ports which AWEBSVC is configured to use.
Possible cause: The designated Web Site is disabled in IIS.
Solution: Verify that the designated Web Site is enabled, and functioning properly.
For more information, refer to Microsoft Knowledge Base.
And awebsctl.log has the below error lines:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
STATMSG: ID=8100
What should I check from IIS side?
Application Catalog Website is functioning properly.
Thanks & regards,
Kedar
Thanks & Regards, Kedar

Event 7024, Service Control Manager Error %%16842771

Am running Windows Server 2008 R2 OS. I received a Service Control Manager error, event ID 7024 with an error code of
%%16842771 when trying to stop the PlanetPress Suite Messenger 7 service. Does anyone know what this error code of
%%16842771 means and/or how to fix it? Is there somewhere that I can look up these codes? Here are the details:
System
Provider
[ Name]
Service Control Manager
[ Guid]
{555908d1-a6d7-4695-8e1e-26931d2012f4}
[ EventSourceName]
Service Control Manager
EventID
7024
[ Qualifiers]
49152
Version
0
Level
2
Task
0
Opcode
0
Keywords
0x8080000000000000
TimeCreated
[ SystemTime]
2013-12-03T16:40:51.395984800Z
EventRecordID
33920
Correlation
Execution
[ ProcessID]
512
[ ThreadID]
11744
Channel
System
Computer
AXE1PPS02P.axe.anixter.com
Security
EventData
param1
PlanetPress Suite Messenger 7
param2
%%16842771
Thanks,
Laurie

The error code may be linked to application (PlanetPress Suite Messenger 7).
So seek help from application vendor once.
Regards, Ravikumar P

SERVICE CONTROL MANAGER

The Diagnostic Service Host service failed to start due to the following error:
   The account specifield for this service is different from the account specifield
   other service running in the same process.
   - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2014-05-07T19:04:21.030189900Z" />
<EventRecordID>555930</EventRecordID>
<Correlation />
<Execution ProcessID="868" ThreadID="5052" />
<Channel>System</Channel>
<Computer>PC001</Computer>
<Security />
</System>
- <EventData>
<Data Name="param1">Diagnostic Service Host</Data>
<Data Name="param2">%%1079</Data>
</EventData>
</Event>

Hi donm12,
Please offer us more information about the event ID, in your case it must your google related application or service can’t started, please contact your soft vendor for the
further help.
The third party similar issue article:
Troubleshooting ‘At least one service or driver failed during system startup’
http://networkadminkb.com/KB/a148/troubleshooting-at-least-one-service-driver-failed.aspx
I’m glad to be of help to you!
*** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites;
therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure
that you completely understand the risk before retrieving any software from the Internet. ***
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Service control manager error, event 7011

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7011</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2014-08-27T11:43:13.853282700Z" />
<EventRecordID>33762</EventRecordID>
<Correlation />
<Execution ProcessID="668" ThreadID="208" />
<Channel>System</Channel>
<Computer>UTKARSH-PC</Computer>
<Security />
</System>
- <EventData>
<Data Name="param1">30000</Data>
<Data Name="param2">wuauserv</Data>
</EventData>
</Event>

Hi utkarsh,
Based on the information you provided, the “ Service Control Manager“ is responsible for this. In this case, I would suggest to run System File Checker to fix this.
System File Checker is a utility in Windows that allows users to scan for corruptions in Windows system files and restore corrupted files, you can do it in this way:
1.Open an elevated command prompt: type Command Prompt in the Search box, right-click Command Prompt, and then click Run as administrator.
2.and then type: sfc /scannow hit enter.
Or you can follow the article below to fix this:
http://support.microsoft.com/kb/929833
Regards
Wade Liu
TechNet Community Support

Lync Server 2013 Standard Deployment: Cannot Open Service Control Manager...

Hi
thanks for any advice.I've just install Lync 2013 Standard as the steps in Technet,When I publish the topology,meet the error as listed.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.XdsDatabase'****
Initializing DbSetupBase
Parsing parameters...
Found Parameter: SqlServer Value lync2012ek.ek2012.net\rtc.
Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
Found Parameter: Publisheracct Value EK2012\RTCUniversalServerAdmins.
Found Parameter: Replicatoracct Value EK2012\RTCUniversalConfigReplicator.
Found Parameter: Consumeracct EK2012\RTCUniversalReadOnlyAdmins.
Found Parameter: Role Value master.
Trying to connect to Sql Server lync2012ek.ek2012.net\rtc. using windows authentication...
Exception Stack:
Type: System.InvalidOperationException, Message: Cannot open Service Control Manager on computer 'lync2012ek.ek2012.net'. This operation might require other privileges.
Type: System.ComponentModel.Win32Exception, Message: Access is denied.
best regards,
George
George Guo

please verify your computer name while you creating FQDN pool FQDN of Server name
example
computer name
is server1
domain name is abc.ae
so,
your FQDN pool name will be server1.abc.ae
problem solved :)

Functioning of service control manager(SCM)

hi,
Can anyone give me links where i can find more details about Service control manager(SCM). i have gone through this link
http://msdn.microsoft.com/en-us/library/windows/desktop/ms685150%28v=vs.85%29.aspx
But it is talking about SCM's functionality. But i want to know how SCM interacts (i.e. various methods and functions used) with the services. i want to know about the internal functioning/working of service control manager.
can anyone give me any links related to this.
Thanks,
jai

Hi jai prakashh,
The SCM works in the process below:
During system boot, the SCM starts all auto-start services and the services on which they depend. For example, if an auto-start service depends on a demand-start service, the demand-start service is also started automatically.
The load order is determined by the following:
1.The order of groups in the load ordering group list. This information is stored in the ServiceGroupOrder value in the following registry key:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control
To specify the load ordering group for a service, use the lpLoadOrderGroup parameter of the CreateService or ChangeServiceConfig function.
2.The order of services within a group specified in the tags order vector. This information is stored in the GroupOrderList value in the following registry key:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control
The detailed steps and introduction can be found at:
http://msdn.microsoft.com/en-us/library/windows/desktop/ms681957(v=vs.85).aspx
Regards
Wade Liu
TechNet Community Support

Service Control Manager - 7009

I have Oracle client software on my Windows Professional workstation for Oracle 8i for NetWare server. In the Event Log I recieved next message:
Source: Services Control Manager
ID: 7009
Timeout (30000 ms) expectations for connection of service OracleWebAssistant0.
What's a problem?
Michael S. Androsov
EXPOCENTR

I have the Oracle8 for NetWare CD (form NetWare 5.1 disk set). This CD includes: Oracle8 Server & Oracle8 Client.
I'm used this disk for my computer.
Michael S. Androsov
EXPOCENTR

Could not install DPM agent on Secondry site DPM could not connect to the Service control manager : ID 33221

Hi,
We have two DPM 2012 R2 server installed at Primary and Secondary site Windows 2012 R2 installed.
We need to Protected Primary DPM from Secondary DPM.
When install DPM agent got error from secondary DPM console.
“DPM could not connect to the Service Control Manager on these servers ID: 33221”
Checked till now :
Visual C++ redistributable installed.
Checked DNS A record and both server can ping each other,
Widows Firewall off on both servers.
Net stop mpssvc ( Windows firewall service)
sc \\Server1 query
àable
to see result
Thanks,

Hi
You mention checking the DNS A record, are these 2 servers not in the same domain? Can you ping -a computername?
Do you have any other AV software that have firewalls built in?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Services Control Manager Issue

Hello All,
The other day I rebuilt a computer here using my automated, sysprepped build(which always works), and then I ran my migration script that does a number of things, one of those things being a netdom renamecomputer operation. When the portion of the script
got to the rename computer part, I received the following error:
The attempt to open the service control manager on COMPUTERNAME
failed with error 1818. Unable to determine if the Certificate Authority
service is installed.
I've never seen this before. Permissions on the services control manager are fine, and I even rebuilt this box twice to see if something got botched in the image process but to no avail. I've tried to research this as much as I can and I can't come up with
anything. If anyone could shed some light on this, it would be much appreciated!
SIDE NOTE: Does anyone know why when deploying a Windows 7 automated build, once completed, the image doesn't always have File and Printer Sharing enabled in the Firewall? I've noticed inconsistencies with this when building out machines
with my image and I don't understand why.
Thanks!
Ron

Figured it out. Oddly, Netdom.exe was not a part of this particular Windows 7 OS-- why, the world will never know. I copied down the the .exe from a machine that actually had it to system32 on the machine that did not have it and presto-- netdom renamecomputer
worked like a charm. I came to this conclusion by running the netdom renamecomputer command locally on troublesome machine rather than remotely and the error message was much more telling(saying that it didn't recognize 'netdom' as a command).
Cheers!

Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests

Hi,
We are using SCCM 2012 sp1 cu5 with one primary in the datacenter and a number of local DP's which are presently servicing 200 users, but will rise to 12,000. The Application Catalogue is installed on the primary server.
Once a day we get the above error and the message id is 8101, and sometimes a user will have to click on install twice, with the first one failing (the ones that fail are normally with dependencies which are quite large in size around 250MB)
I'm just wondering if this is something I should be concerned about, especially since we will be ramping up user numbers in the next few weeks, and if it could be down to volume of traffic, although the apps are downloaded to the users local DP.
Also, does this design look suitable to service this amount of users, or should I have local application catalogues? The WAN bandwith between the datacenter and the user sites has recently been upgraded and is pretty fast.
Thanks
Jaz

Hi Torsten,
Message ID is in the SMS_AWEBSVC_CONTROL_MANAGER status log and equates to "Application Web Service Manager detected AWEBSVC is not responding to HTTP requests. The http error is 12002.
Then, about 1 hr later in the same monitoring log I get Message ID 8102 "Application Web Service Control Manger detected AWEBSVC is responding to HTTP requests.
At the moment it isn't doing this very often, just once a day at different times normally, but it has also logged this a couple of times as well. I guess it may correspond to multiple users accessing the web portal at multiple times, but wondered if
anyone else has seen this behaviour and how it was fixed.
Thanks
Jaz

Web service control manager

Hi,
I have created a Gateway in WebService Control manager. I have registered a service with the gateway. Now when I am testing with test page..it is throwing error "Failed to read WSDL from http://192.168.44.85:8888/TestGateway/services/SID0003002?wsdl:WSDL not found"
Could someone please help me out.its urgent.
thanks in advance

<xsl:for-each select="/tns:BSNLOMITUpdates/BSNLOMITUpdateValue/OrderEntry-Orders/ListOfOrderItemAttributes/OrderItemAttributes">
<xsl:choose>
<xsl:when test='xp20:matches(Name,"TT_FAULT_CLEARANCE_CODE")'>
<ns0:ClearanceCode>
<xsl:value-of select="Value"/>
</ns0:ClearanceCode>
</xsl:when>
</xsl:choose>
</xsl:for-each>
i will be getting different clearance codes from the name .Each time i have to check the value and send to the appropriate target.So i have to use number of for loops.
Is there any solution fo this.
Thanks in advance.

OPMD Install failed to open service control manager

Hi
I have an oracle 10.2.0.5 RAC installation on windows 2008R2 and I am encountering error when trying to install opmd-install
I received the error OPMD Install failed to open service control manager

Hi,
It seemed the issue was resolved by installing the Agent manually. Since the subdomains are fully trusted, there is no need to install Gateway or Management Server in each subdomains. After installing the agents, the alerts can be received on domain.
Deploying Agents Across Multiple Domains
http://technet.microsoft.com/en-us/library/cc179947.aspx
Niki Han
TechNet Community Support

Error occured while performing the operation : Cannot open Service Control Manager on computer FOO. This operation might require other privileges.

My company is splitting in two, so we're migrating half of our systems and servers to a new domain. I have an application that uses AppFabric. We have 3 Windows servers running AppFabric, each talking to a SQL server for the AppFabric cluster service.
On the initial domain, everything was working fine. AppFabric service is running under a service account we'll call DOMAIN1\svc_acct that is the dbo on the AppFabric database. The service account is a local admin on all the boxes. Permissions are all working
fine.
I've migrating the servers to the new domain and it won't work anymore.
Now I'm using DOMAIN2\svc_acct that is the dbo on the database again. The exact same app servers have moved to the new domain and once again that service account is a local admin on all the boxes. But AppFabric won't work. I migrated the boxes back to the initial
domain and it worked again. I migrated it back to the new domain, and it won't work.
I'm under a time crunch to get this working for the company split. Any help would be greatly appreciated!
Thanks!

Lowering UAC is not always the best approach.
It sounds like you could run the installation elevated by right clicking setup and selecting Run as administrator.
Jason Warren
habaneroconsulting.com/Insights
@jaspnwarren

Service control manager logging system

Similar Messages

Maybe you are looking for