Service degradation - post here?

Verizon provides without question the best service in my neighborhood - until today. Something must have happened to a tower or something (Boulder, Colorado in the Newlands/Sanitas neighborhood). Any ideas on where to report this service degradation? My wife is also a Verizon customer and her service has also been terrible today. Just want to make Verizon aware.

Customer Service
Dial *611 from a cell phone
(800) 922-0204
Monday - Sunday 6 am - 11 pm
When you get the phone tree, press 3 for Technical Support.

Similar Messages

Unable to find an Output Post Processor service to post-process request

Hi experts,
Users complaining that they could not able to generate the PDF.
User Complaint:
The program does not generate the PDF. The program just generates the XML output. The logfile shows that “Unable to find an Output Post Processor service to post-process request 25852905.”
EBS: 12.1.2
OS: RHEL 5.5
DB: 11.1.0.7.0
Steps that we tried:
1. Increased the OPP process to 16
2. Increased Concurrent:OPP Response Timeout to 750
3. There is no issue in manager log file.
4. Concurrent Requests Fail Due to Output Post Processing (OPP) Timeout (Doc ID 352518.1)
5. Restarted CM. Ran CMclean.
6. Re: Output Post Processor
7.Unable to View pdf Output File Created by XML Publisher
But we dont find any solutions over the above.
Log:
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_order_by='TRX_NUMBER'
p_trx_number_low='8414037'
p_trx_number_high='8414037'
p_open_invoice='N'
p_check_for_taxyn='N'
p_choice='SEL'
p_header_pages='1'
p_debug_flag='Y'
p_message_level='10'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Enter Password:
REP-0004: Warning: Unable to open user preference file.
MSG-00100: DEBUG: AfterPForm_Trigger +
MSG-00100: DEBUG: Multi Org established.
MSG-00100: DEBUG: AfterParam_Procs.Get_Country_Details
MSG-00100: DEBUG: Get_Country_Description.
MSG-00100: DEBUG: AfterParam_Procs.Switch_On_Debug
MSG-00100: Running in debug mode
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_Low
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_High
MSG-00100: DEBUG: AfterParam_Procs.Get_Tax_Option
MSG-00103: lp_trx_date_clause = and a.trx_date = a.trx_date
MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
MSG-00100: DEBUG: P_Choice: SEL
MSG-00500: DEBUG: About to build WHERE clause.
MSG-00500: DEBUG: WHERE clause built.
MSG-00100: DEBUG: Choice is other than ADJ, setting ORDER BY.
MSG-00500: DEBUG: Table 1:          AR_ADJUSTMENTS                         COM_ADJ,
        AR_PAYMENT_SCHEDULES                   P,
        RA_CUST_TRX_LINE_GL_DIST               REC,
        RA_CUSTOMER_TRX                        A,
        HZ_CUST_ACCOUNTS                       B,
        RA_TERMS                               T,
        RA_TERMS_LINES                         TL,
        RA_CUST_TRX_TYPES                      TYPES,
        AR_LOOKUPS                             L_TYPES,
        HZ_PARTIES                        PARTY,
        HZ_CUST_ACCT_SITES                     A_BILL,
        HZ_PARTY_SITES                         PARTY_SITE,
        HZ_LOCATIONS                           LOC,
        HZ_CUST_SITE_USES                      U_BILL
MSG-00500: DEBUG: Table 2:          RA_TERMS_LINES                         TL,
        RA_CUST_TRX_TYPES                      TYPES,
        AR_LOOKUPS                             L_TYPES,
    HZ_CUST_ACCOUNTS                       B,
        HZ_PARTIES                        PARTY,
        HZ_CUST_SITE_USES                      U_BILL,
        HZ_CUST_ACCT_SITES                     A_BILL,
        HZ_PARTY_SITES                         PARTY_SITE,
        HZ_LOCATIONS                           LOC,
        AR_ADJUSTMENTS                         COM_ADJ,
        RA_CUSTOMER_TRX                        A,
        AR_PAYMENT_SCHEDULES                   P,
        RA_TERMS                               T
MSG-00500: DEBUG: Where 1: A.BILL_TO_CUSTOMER_ID = B.CUST_ACCOUNT_ID
AND REC.CUSTOMER_TRX_ID = A.CUSTOMER_TRX_ID
AND REC.LATEST_REC_FLAG = 'Y'
AND REC.ACCOUNT_CLASS   = 'REC'
AND P.PAYMENT_SCHEDULE_ID + DECODE(P.CLASS,
                                   'INV', 0,
             = COM_ADJ.PAYMENT_SCHEDULE_ID(+)
AND COM_ADJ.SUBSEQUENT_TRX_ID IS NULL
AND 'C'    = COM_ADJ.ADJUSTMENT_TYPE(+)
AND A.COMPLETE_FLAG = 'Y'
AND A.CUST_TRX_TYPE_ID = TYPES.CUST_TRX_TYPE_ID
AND L_TYPES.LOOKUP_TYPE = 'INV/CM/ADJ'
AND A.PRINTING_OPTION IN ('PRI', 'REP')
AND L_TYPES.LOOKUP_CODE =
DECODE( TYPES.TYPE,'DEP','INV', TYPES.TYPE)
AND NVL(P.TERMS_SEQUENCE_NUMBER,nvl(TL.SEQUENCE_NUM,0))=nvl(TL.SEQUENCE_NUM,nvl(p.terms_sequence_number,0))
AND DECODE(P.PAYMENT_SCHEDULE_ID,'',0, NVL(T.PRINTING_LEAD_DAYS,0))=0
AND A.BILL_TO_SITE_USE_ID = U_BILL.SITE_USE_ID
AND U_BILL.CUST_ACCT_SITE_ID = A_BILL.CUST_ACCT_SITE_ID
AND A_BILL.party_site_id = party_site.party_site_id
AND B.PARTY_ID = PARTY.PARTY_ID
AND loc.location_id = party_site.location_id
AND NVL(LOC.LANGUAGE,'US') = 'US'
AND A.TERM_ID = TL.TERM_ID(+)
AND A.TERM_ID = T.TERM_ID(+)
AND A.CUSTOMER_TRX_ID = P.CUSTOMER_TRX_ID(+)
MSG-00500: DEBUG: Where 2: A.BILL_TO_CUSTOMER_ID = B.CUST_ACCOUNT_ID
AND P.PAYMENT_SCHEDULE_ID + DECODE(P.CLASS,
                                   'INV', 0,
             = COM_ADJ.PAYMENT_SCHEDULE_ID(+)
AND COM_ADJ.SUBSEQUENT_TRX_ID IS NULL
AND 'C'    = COM_ADJ.ADJUSTMENT_TYPE(+)
AND A.COMPLETE_FLAG = 'Y'
AND A.CUSTOMER_TRX_ID = P.CUSTOMER_TRX_ID
AND A.CUST_TRX_TYPE_ID = TYPES.CUST_TRX_TYPE_ID
AND L_TYPES.LOOKUP_TYPE = 'INV/CM/ADJ'
AND A.PRINTING_OPTION IN ('PRI', 'REP')
AND L_TYPES.LOOKUP_CODE =
DECODE( TYPES.TYPE,'DEP','INV', TYPES.TYPE)
AND NVL(T.PRINTING_LEAD_DAYS,0) > 0
AND A.BILL_TO_SITE_USE_ID = U_BILL.SITE_USE_ID
AND U_BILL.CUST_ACCT_SITE_ID = A_BILL.CUST_ACCT_SITE_ID
AND A_BILL.PARTY_SITE_ID = PARTY_SITE.PARTY_SITE_ID
AND B.PARTY_ID = PARTY.PARTY_ID
AND LOC.LOCATION_ID = PARTY_SITE.LOCATION_ID
AND NVL(LOC.LANGUAGE,'US') = 'US'
AND NVL(P.TERMS_SEQUENCE_NUMBER,TL.SEQUENCE_NUM)=TL.SEQUENCE_NUM
AND T.TERM_ID = P.TERM_ID
AND TL.TERM_ID(+) = T.TERM_ID
MSG-00100: DEBUG: AfterPForm_Trigger -
MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Printing_Option
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 26
MSG-00100: DEBUG: BeforeReport_Trigger -
MSG-05000: DEBUG: Trx No... 8414037
MSG-00100: DEBUG: Get_Country_Description.
MSG-00010: 12:03 1 Transaction: 8414037
MSG-00100: DEBUG: Get_Country_Description.
MSG-00100: DEBUG: Get_Country_Description.
MSG-05000: DEBUG: Remit To Address....
MSG-05000: DEBUG: Address Style:
MSG-05000: DEBUG: Address 1:        11000 IH-35 NORTH
MSG-05000: DEBUG: Address 2:
MSG-05000: DEBUG: Address 3:
MSG-05000: DEBUG: Address 4:
MSG-05000: DEBUG: City:             AUSTIN
MSG-05000: DEBUG: County:
MSG-05000: DEBUG: State:            TX
MSG-05000: DEBUG: Province:
MSG-05000: DEBUG: Postal Code:      78753
MSG-05000: DEBUG: Territory:
MSG-05000: DEBUG: Country_Code:     US
MSG-05000: DEBUG: Customer Name:
MSG-05000: DEBUG: Bill To:
MSG-05000: DEBUG: First Name:
MSG-05000: DEBUG: Last Name:
MSG-05000: DEBUG: Mail Stop:
MSG-05000: DEBUG: Country Code:     US
MSG-05000: DEBUG: Country Desc:
MSG-05000: DEBUG: Print Home Flag: N
MSG-05000: DEBUG: Width:            40
MSG-05000: DEBUG: Height Min:       6
MSG-05000: DEBUG: Height Max:       6
MSG-05000: DEBUG: Remit To Formatted...   11000 IH-35 NORTH
AUSTIN TX 78753
MSG-05000: DEBUG: Bill To Address....
MSG-05000: DEBUG: Address Style:
MSG-05000: DEBUG: Address 1:        2481 ROSS CRES
MSG-05000: DEBUG: Address 2:
MSG-05000: DEBUG: Address 3:
MSG-05000: DEBUG: Address 4:
MSG-05000: DEBUG: City:             NORTH BATTLEFORD
MSG-05000: DEBUG: County:
MSG-05000: DEBUG: State:
MSG-05000: DEBUG: Province:         SASKATCHEWAN
MSG-05000: DEBUG: Postal Code:      S9A3R3
MSG-05000: DEBUG: Territory:
MSG-05000: DEBUG: Country_Code:     CA
MSG-05000: DEBUG: Customer Name:    VAUGHN FAUTH
MSG-05000: DEBUG: Bill To:
MSG-05000: DEBUG: First Name:       VAUGHN
MSG-05000: DEBUG: Last Name:        FAUTH
MSG-05000: DEBUG: Mail Stop:
MSG-05000: DEBUG: Country Code:     US
MSG-05000: DEBUG: Country Desc:
MSG-05000: DEBUG: Print Home Flag: N
MSG-05000: DEBUG: Width:            40
MSG-05000: DEBUG: Height Min:       8
MSG-05000: DEBUG: Height Max:       8
MSG-05000: DEBUG: Bill To Formatted... VAUGHN FAUTH
VAUGHN FAUTH
2481 ROSS CRES
NORTH BATTLEFORD SASKATCHEWAN S9A3R3
Canada
MSG-05000: DEBUG: Ship To Address....
MSG-05000: DEBUG: Address Style:
MSG-05000: DEBUG: Address 1:        2481 ROSS CRES
MSG-05000: DEBUG: Address 2:
MSG-05000: DEBUG: Address 3:
MSG-05000: DEBUG: Address 4:
MSG-05000: DEBUG: City:             NORTH BATTLEFORD
MSG-05000: DEBUG: County:
MSG-05000: DEBUG: State:
MSG-05000: DEBUG: Province:         SASKATCHEWAN
MSG-05000: DEBUG: Postal Code:      S9A3R3
MSG-05000: DEBUG: Territory:
MSG-05000: DEBUG: Country_Code:     CA
MSG-05000: DEBUG: Customer Name:    VAUGHN FAUTH
MSG-05000: DEBUG: Bill To:
MSG-05000: DEBUG: First Name:
MSG-05000: DEBUG: Last Name:
MSG-05000: DEBUG: Mail Stop:
MSG-05000: DEBUG: Country Code:     US
MSG-05000: DEBUG: Country Desc:
MSG-05000: DEBUG: Print Home Flag: N
MSG-05000: DEBUG: Width:            40
MSG-05000: DEBUG: Height Min:       8
MSG-05000: DEBUG: Height Max:       8
MSG-05000: DEBUG: Ship To Formatted...   VAUGHN FAUTH
2481 ROSS CRES
NORTH BATTLEFORD SASKATCHEWAN S9A3R3
Canada
Report Builder: Release 10.1.2.3.0 - Production on Wed Sep 25 12:03:07 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
+------------- 1) PUBLISH -------------+
Unable to find an Output Post Processor service to post-process request 25854362.
Check that the Output Post Processor service is running.
+--------------------------------------+
+------------- 2) PRINT   -------------+
Not printing the output of this request because post-processing failed.
+--------------------------------------+
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Can any one please guide me for this issue.?.
Thanks,
Vasanth

Hussein,
FNDOPP log file
9/25/13 10:47:48 AM] [Thread-31] Service thread starting up.
[9/25/13 10:47:48 AM] [EXCEPTION] [OPPServiceThread0] java.sql.SQLException: ORA-24067: exceeded maximum number of subscrib
ers for queue APPLSYS.FND_CP_GSM_OPP_AQ
ORA-06512: at "APPS.FND_CP_OPP_IPC", line 85
ORA-06512: at line 1
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1034)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:191)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:950)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1225)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3387)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3488)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:3857)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
at oracle.apps.fnd.cp.opp.OPPAQMonitor.initAQ(OPPAQMonitor.java:558)
at oracle.apps.fnd.cp.opp.OPPAQMonitor.init(OPPAQMonitor.java:534)
at oracle.apps.fnd.cp.opp.OPPAQMonitor.initialize(OPPAQMonitor.java:89)
at oracle.apps.fnd.cp.opp.OPPServiceThread.init(OPPServiceThread.java:94)
at oracle.apps.fnd.cp.gsf.BaseServiceThread.run(BaseServiceThread.java:135)
[9/25/13 11:04:11 AM] [EXCEPTION] [OPPAQMON:876235] ORA-04021: timeout occurred while waiting to lock object
[GC 20321K->4065K(63360K), 0.0137050 secs]
Thanks,
Vasanth

Pls.help my iphone stuck in recovery mode and itunes wont recognize it..i tried the other options that posted here,,,pls tell me what to do..

pls. help my iPhone stuck in recovery mode and iTunes wont recognize it..i tried the other options that posted here,,,pls tell me what to do..before it was just stuck in an apple logo but when i tried recovery mode to itunes then it stuck..

Hi awison,
If your iPhone is not recognized by iTunes on your Windows computer you may want to use the steps in this article to troubleshoot -
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
This may also resolve your recovery mode issue. If it does not, use the steps in this article to resolve it -
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Thanks for using Apple Support Communities.
Best,
Brett L

Hello. I recently bought an Iphone 5S. I tried to charge it with the original charger that came with the phone and it doesn´t work...The cable is good, I´m charging the phone via my PC. I read many answers posted here but no one helped me. Thanks in

Hello. I have a new Iphone 5S and the charger taht came with the phone doesn´t charge my Iphone. The cable is good because I´m charging the phone via my PC. I tried every recomendation posted here but none helped me...I live in Argentina and we don´t have local support here, I would´ve ask for a new one but it´s not an option here. Does anyone know what can I do? Thanks in advance. Regards.

I live in China as well and my iPhone5s is the model A1530 I bougth outside China. I have the same problem as Nikatnight with the iPhone while the iPad Air (wifi only) is working like a charm. It must be definitely something related to the carrier since I was abroad few days ago and everything worked well.
If you pay attention at the source of your maps, you'll discover they are provided by AutoNavi instead of TomTom and make them appear in chinese with their own border interpretation. Queries are only acceppted in Chinese (p.e. if I type in english "Los Angeles International Airport" it replies it cannot locate it)
I suppose everything will be fine when you'll be out of censorship....
Perhaps iOS Apple Maps are absolutely useless for expatriate in China.
Use Google Maps instead
BTW, I'm surprised how much Apple might prostrate towards hard power Governments.... No matter what, money are always on top!

Ipad syncing but won't go past agreement (was told to post here)

Hi,
I was told to post here as its more relevant to itunes
A friend has purchased an Ipad but is having a problem. When you plug it into mac it comes up in itunes and you have to agree the terms and conditions. You press Agree but the page never changes! and that means she can't sync the Ipad or anything
The laptop is connected to the internet is aswell (before you ask! haha)
Hope you can help
Many thanks
Joe

Jenn,
If you cannot run Repair Disk from Disk Utility you are ARE NOT running it from the original Install Disk that came with the computer or the Snow Leopard Upgrade Disk you purchased. Please follow the directions I provided and you should be able to run Repair Disk form Disk Utilities.
Regarding Best Buy I would recommend NOT taking it to them for repair, if you have an Apple Store in your area please take it there. If you don't have an Apple Store within a couple of hour drive use this link to locate an AASP to take your machine to.
I am assuming you have your Time Machine backups on an external HD. If so they are safe for now. In the event you need to reformat the internal HD on your MBP and reinstall OS X you can use the TM backups to restore from.
Regarding "do you think copying the disk as mentioned (from the disk utility) would work?" No that would not work.
Lets first see if Disk Utility can repair your internal HD. If for some reason that fails then you can run Apple Hardware Test and see if any HD errors are reported there. And finally if that doesn't come up with anything then you can make an appointment at an Apple Store or AASP.

How do I embed an image in a post here?

How do I embed an image in a post here?

Hi Roger!
Some additional tips.
To post an image in  Discussions, create a Screen Shot of the image you wish to post.
Upload the image to an online storage facility, like one of these linked to below.
Flickr
ImageShack
PhotoBucket
PICVAULT
Twango
tinypic
imageno
Then use HTML formatting, to insert the URL of the location.
Use this format <img src="Insert URL Here">
Post the resulting line of text.
You can alternately insert the URL of the image between ! (Exclamation Marks) to have it appear in a post.
Keep the images small, and unobtrusive, when possible.
If the image is large, you can use this format:
<a href="Insert URL Here"target="_blank"><img src="Insert Same URL Here" width="Insert Desired Size Here"></a>
Desired Size is a number, dependent on the size to be displayed in the post, such as 20, 50, 200, etc. You can experiment with that number.
Below that type "Click to View Full Size".
The image will appear in the post at the size you selected, but when clicked, will open full screen.
You can also just post a Link/URL, to the image location, using this format:
<a href="Insert URL Here">Type Title Here</a>
Or use Skitch.
Quoted from the Skitch website:
"Skitch.com is a webservice that works hand in hand with our application Skitch to give you 1-click uploading of images for fast and fun image sharing."
ali b

Posting here or AskTom about report using xmldb

Hello,
There was a posting here or on the asktom site about using xmldb to build the html for a report in a pl/sql region, I've looked and searched and even asked my buddy google about it and I cannot find the relevant posting if anyone rembers having seen it can you post the link.
Thanks,
Carl

Maybe you have this in mind ?
http://tkyte.blogspot.com/2006/01/i-like-online-communities.html
http://tkyte.blogspot.com/2006/01/9i-10g-version.html
Best regards
Maxim

"Please Read This Before Posting Here" font large enough?

To whom it may concern,
Perhaps if you can't change anything else maybe changing the size of that font might help.
Really, (and clearly) something needs to be changed about the way Discussions is organized. I see nothing but excuses about topics being mistakenly posted in the wrong forums.
I hope that something "is" being done to correct this issue in Discussion forums. Personally, I feel that far too many new users are posting in the wrong forums. The quantity of how many is way beyond what should be seen in my opinion. This has to show some proof that the way the Discussions is setup is just not working properly and corrections need to be made. And not just here in the Feedback About Discussions forum but across the board.
One can understand perhaps an erroneous topic being posted in, for example, 10.3 and earlier whereas it should be posted in the 10.4 Tiger forum where no huge banner states posting procedure but when one sees the amount of off topics in this forum it is just a joke now. Obviously, these users are not posting here intentionally knowing it is the wrong forum. For what ever reason they have wound up here and don't realize that it is incorrect. I believe it "is" the responsibility of the forums to make sure these posts are posted correctly and not by just moving them but to change the way the discussions are setup/operate so that it doesn't happen to begin with.
Please do something,
littleshoulders
Message was edited by: littleshoulders

J.K. ROFLing,
What do you suggest littleshoulders?
I have made suggestions, whereas others have not but have also asked for changes here in regards to posting topic probems.
A suggestion I have made was to force the user whichever way they enter discussions to fill in a form that directs the user to the most appropriate forum. This doesn't need to be a long form but I'm sure you have seen this type of form on other sites that narrow a search down.
I'm certainly not an expert (I assume Apple has enough on staff to handle the logistics) and would only venture a guess as to what might be asked on the form to narrow the search.
Most importantly, I can't believe that the form would be any more labor intensive on the user than navigating through the Discussion pages to get to an appropriate forum. And quite frankly, even if it were it would certainly direct the user to an appropriate forum saving huge amounts of wasted time trying to get their support.
"Computer: iMac G3
OS version: OS X v10.3.9
What is you computer problem or support topic: Terminal problem"
I'm sure there would have to be other menu options (pop-ups and user filled info) for this type of search process but that is an abbreviated example for this excercise.
These directing forms are used all over the internet to direct the user to the appropriate product, support or otherwise.
I contend that the way that Discussions is presented currently that it needs this type of user interface to work properly.
In closure, I have to say that I don't believe in status quo and think that any change for the better is welcome and I bet all those novice users who struggle with posting topics correctly would agree. They obviously need more help than what is currently offered with posting.
regards,
littleshoulders

Please post here the solution to update 10.4.6

I also have had troubles with this update. It would not install so I shut down and tried to this morning. It continued to stay on the gray screen with the loading wheel. I left it there loading when I left the house because it didn't finish. I am thinking of running Disk Utility when I get back home.
The reason for this post is I have been looking on the forums to many posts about this and I am getting lost on the exact way about going about getting this installer to work and everything to run smooth. If you have gotten it to work correctly or know a way to run it correctly please post here what you did. It would be the greatest help and would be greatly appreciated. Thank you for your help!
-Kyle

This really isn't going to be much help for you, Kyle, because all I did was Click Software Update and hit install. That's pretty much all I ever do. I do have a cloned backup so restoration is trivial perhaps explaining the casual approach but that said, never had to restore either.

If you receive the HTC Droid Incredible Froyo update, please post here.

It is August 18th and we all know the rumors said we would get Froyo today on our Incredibles. If you receive the HTC Droid Incredible Froyo update, please post here so those of us waiting will know that the update is starting to download. It should be downloading by batches of phones. Once we know it has started, at least we'll all know it's then just going to be a short time until we are in an update batch.

My wife had the update waiting when she checked her phone at 9am this morning, I'm still waiting.
She's got a 917 area code and I'm 646. Her phone's paid by a corporate account while mine is tied to a different larger corporate account, but it is my personal phone that I pay for.
I've got my phone about a month before her and have been a longer VZW customer, so no idea what the distribution order is.

Service order posting date error.

In DBM Service order posting date is taken from the controlling document because of that error comes as
Document date 03.12.2011(Curent date)is greater than billing date 02.12.2011(Date given in Billing date in service order header)
But this error is not coming in sales document..
I need to post service order in the date i mentioned in the service order..
How dould i resolve this issue..?

Hi Arvind,
there a many notes describing this problem:
1474254, 1473093, 1422246, 1482159, 1588751, 1359333, 1658317
Best regards
Robert

Does Oracle address ANY posts here?

Does Oracle address ANY posts here?
Seems like the only valuable information is from other users and not from Oracle in these forums which means if you really have an Oracle problem/bug like I do then you are SOL.
Would be nice if Oracle would address some of the post/issues in these forums.
At least the DB2 UDB folks actually answer there forums...

Hi Nedf,
As Wendy stated in your other thread in this forum, you need to use the link below to get help from or give feedback to HP. This is a community where users assist other users.
http://welcome.hp.com/country/us/en/wwcontact_us.html
This user-to-user community is not a venue to receive direct help or feedback from HP. If you have any further questions or concerns, please feel free to send me a Private Message.
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
Rules of Participation

Unable to find SWT forum, so posting here

Hi,
Has anyone worked on SWT? I am new to it.. and facing this problem.
In my app, I have a login Page and after giving the credentials the next page is displayed. Implementing this in swing is very easy but I have no idea how to implemt in SWT can anyone give me the sample code for the same.
Sorry for posting here.
Pankaj

I am posting a sample code in which from LoginPage i have to go to a TestPage . I guess if i will achieve this, i can achieve the table. Right now, I am getting SWTException : Subclassing not allowed when i press enter key in the password field. Ideally , it should display a TestPage when i press "ENTER" hey in PASSWORD field. here are the files:
//LoginPagenew.java
package com.qwest.bpm.swt.designer;
import org.eclipse.swt.SWT;
import org.eclipse.swt.events.KeyAdapter;
import org.eclipse.swt.events.KeyEvent;
import org.eclipse.swt.layout.FormAttachment;
import org.eclipse.swt.layout.FormData;
import org.eclipse.swt.layout.FormLayout;
import org.eclipse.swt.layout.GridLayout;
import org.eclipse.swt.widgets.Button;
import org.eclipse.swt.widgets.Composite;
import org.eclipse.swt.widgets.Display;
import org.eclipse.swt.widgets.Group;
import org.eclipse.swt.widgets.Label;
import org.eclipse.swt.widgets.Shell;
import org.eclipse.swt.widgets.Text;
public class LoginPageNew {
private Shell shell;
public LoginPageNew() {
super();
public static void main(String[] args) {
          new LoginPageNew().initialize();
protected void checkSubClass() {
private void initialize(){
Display display = new Display();
shell = new Shell(display);
shell.setText("QBPM");
shell.setMaximized(true);
this.setupWidgets(display, shell);
          shell.pack();
          shell.open ();
          while (!shell.isDisposed ()) {
               if (!display.readAndDispatch ()) display.sleep ();
          display.dispose();
private void setupWidgets(Display display, Shell shell){
final Display newDisplay = display;
FormLayout formlayout = new FormLayout();
          shell.setLayout(formlayout);
          Composite gridComp = new Composite(shell, SWT.NONE);
          GridLayout gridLayout = new GridLayout();
          gridLayout.numColumns = 2;
          gridComp.setLayout(gridLayout);
          final Group group = new Group(gridComp, SWT.NONE);
          group.setText("Credentials");
          Label label1 = new Label(group, SWT.NONE);
          label1.setText("User Name");
          label1.setBounds(60, 60, 120, 20);
          Text username = new Text(group, SWT.BORDER);
          username.setBounds(200, 60, 120, 20);
          Label label2 = new Label(group, SWT.NONE);
          label2.setText("Password");
          label2.setBounds(60, 90, 120, 20);
          Text password = new Text(group, SWT.BORDER);
          password.setEchoChar('*');
          password.setBounds(200, 90, 120, 20);
          password.addKeyListener(new KeyAdapter() {
          public void keyPressed(KeyEvent e) {
          // close the text editor and copy the data over
          // when the user hits "ENTER"
          if (e.character == SWT.CR) {
               System.out.println("Enter is pressed kya");
TestPage form = new TestPage(LoginPageNew.this.shell);
form.show();
          Label label3 = new Label(group, SWT.NONE);
          label3.setText("JNDI Server URL");
          label3.setBounds(60, 120, 120, 20);
          Text serverurl = new Text(group, SWT.BORDER);
          serverurl.setText("t3://localhost:7001");
          serverurl.setBounds(200, 120, 120, 20);
          Label label4 = new Label(group, SWT.NONE);
          label4.setText("Designer Server");
          label4.setBounds(60, 150, 120, 20);
          Text servername = new Text(group, SWT.BORDER);
          servername.setText("com.qwest.bpm.designerserver.DesignerServerRemoteHome");
          servername.setBounds(200, 150, 240, 20);
          Label label5 = new Label(group, SWT.NONE);
          label5.setText("Database");
          label5.setBounds(60, 180, 120, 20);
          Button database = new Button(group,SWT.RADIO);
          database.setBounds(200, 180, 120, 20);
          database.setText("MDW");
          Button login = new Button(group,SWT.PUSH);
          login.setBounds(150, 240, 120, 25);
          login.setText("Login");
          //login.addSelectionListener(page);
          FormData formGrid = new FormData();
          formGrid.top = new FormAttachment(0,120);
          formGrid.left = new FormAttachment(0,150);
          //formGrid.right = new FormAttachment(100,-10);
          //formGrid.bottom = new FormAttachment(10);
          gridComp.setLayoutData(formGrid);
//TestPage.java
package com.qwest.bpm.swt.designer;
import org.eclipse.swt.SWT;
import org.eclipse.swt.layout.FillLayout;
import org.eclipse.swt.layout.GridLayout;
import org.eclipse.swt.widgets.Display;
import org.eclipse.swt.widgets.Group;
import org.eclipse.swt.widgets.Label;
import org.eclipse.swt.widgets.Shell;
import org.eclipse.swt.widgets.Text;
public class TestPage extends Shell{
private Shell shell = null;
private Text firstName = null;
private Display display;
     public TestPage(Shell arg0) {
          this(arg0, SWT.APPLICATION_MODAL);
     * @param arg0
     * @param arg1
     public TestPage(Shell arg0, int arg1) {
          super(arg0, arg1);
protected void checkSubClass() {
public void show(){
          shell = new Shell(display);
          shell.setText("Edit");
          shell.setLayout(new FillLayout());
          //new Button(shell,SWT.PUSH).setText("Go");
          this.initWidgets();
          shell.pack();
          shell.open();
          //Display display = new Display();
          while (!shell.isDisposed()) {
               if (!display.readAndDispatch())
               display.sleep();
public void initWidgets(){
Group group = new Group(shell, SWT.NONE);
          group.setText("Person");
GridLayout layout = new GridLayout();
          layout.numColumns=2;
          group.setLayout(layout);
          new Label(group, SWT.SHADOW_OUT).setText("FirstName");
          firstName = new Text(group, SWT.BORDER);
          firstName.setText("Pankaj Bhomia");
}

Asp net - web service to post files

Hi, I need to create a web service wich use will be to receive binary files, what I want is that the web service accept post methods with files and then save this files to the disk.
Better if your solution works with asp .net 2.0 because it's the framework installed in my server.
luis molina

Hello,
This could help you.
http://support.microsoft.com/kb/318425
[WebMethod]
public bool SaveDocument( Byte[] docbinaryarray, string docname)
string strdocPath;
strdocPath = "C:\\DocumentDirectory\\" + docname;
FileStream objfilestream =new FileStream(strdocPath,FileMode.Create,FileAccess.ReadWrite);
objfilestream.Write(docbinaryarray,0,docbinaryarray.Length);
objfilestream.Close();
return true;
[WebMethod]
public int GetDocumentLen(string DocumentName)
string strdocPath;
strdocPath = "C:\\DocumentDirectory\\" + DocumentName;
FileStream objfilestream = new FileStream(strdocPath,FileMode.Open,FileAccess.Read);
int len = (int)objfilestream.Length;
objfilestream.Close();
return len;
[WebMethod]
public Byte[] GetDocument(string DocumentName)
string strdocPath;
strdocPath = "C:\\DocumentDirectory\\" + DocumentName;
FileStream objfilestream = new FileStream(strdocPath,FileMode.Open,FileAccess.Read);
int len = (int)objfilestream.Length;
Byte[] documentcontents = new Byte[len];
objfilestream.Read(documentcontents,0,len);
objfilestream.Close();
return documentcontents;
if the reply help you mark it as your answer.
Free Managed .NET Excel, Word, PDF Component(Create,
Modify, Convert & Print)

Atlanta service degradation?

Has anyone else noticed a serious service degradation in Atlanta in the last couple of months? I've had problems that I haven't seen since my early days with my first iPhone.
Things like:
--A long time to connect a call (or sometimes the call doesn't go through at all.)
--Little or no available bandwidth in areas I used to have no trouble. Mostly this just results in timeouts when trying to access something online.
I'm just trying to figure out if this is unique to me or a general malaise.
Thanks, Jeff

Customer Service
Dial *611 from a cell phone
(800) 922-0204
Monday - Sunday 6 am - 11 pm
When you get the phone tree, press 3 for Technical Support.

Service degradation - post here?

Similar Messages

Maybe you are looking for