Service desk---not able to assign employee and user to a position
As i click on employee or user one popup comes and doesn't open. Therefore i am not able to assign a employee or user to a position.
Friends please help me out.
regards
Rajneesh
Hi Rajneesh,
yes, please use the IE and add the pop-up-page to the compatibility mode under "EXTRAS --> Settings for compotibility mode --> ADD".
Cheers,
Robert
Similar Messages
-
The search service is not able to connect to the machine that hosts the administration component
Hi
After uninstalling the binaries, and reinstalling / joining back to the farm, everything seems happy expect search.
When we try and start the Search Service back, it takes us to the Search Application section, and shows this message;
The search service is not able to connect to the machine that hosts the administration component
How can I get search to work again, or get around this error?
I am pretty inexperienced with SearchHi Tibsy80,
For your issue, it can be caused by the search admin timer job was disabled.
Run below PS command to know the status:
Get-SPTimerJob job-application-server-admin-service | fl
If it returns “IsDisabled: True”, ran below PS command to enable the service:
Enable-SPTimerJob job-application-server-admin-service
Then run below PS command to stop and start the timer and IIS reset:
Net Stop timer
Net start timer
iisreset
Then wait 1-2 min and try browsing to the SSA again.
Reference:
http://neelb.wordpress.com/2012/01/19/the-search-service-is-not-able-to-connect-to-the-machine/
Also you can refer to the blogs:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/b04498ec-78d1-4bb9-8077-0481977cef10/the-search-service-is-not-able-to-connect-to-the-machine-that-hosts-the-administration-component?forum=sharepointadminprevious
http://davidbajak.com/blog/post/2011/09/29/Fix-SharePoint-2010-Enterprise-Search-After-Using-AutoSPInstaller-Script-Installer.aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support -
WWW service is not able to start via Microsoft Failover Cluster generic service resource
Environment
Cluster Nodes = two
Cluster Nodes OS = Windows 2008R2
Application = IIS
Query
I created generic service resources of many windows services under Microsoft Failover Cluster and they are failing over successfully but when I create a generic service resource for WWW, then the WWW service is not able to online
via Microsoft Failover Cluster. It stuck in online pending.
I have noticed two things.
1.) If the WWW service is set to manual and started at passive node and I manually restart the Active node then the WWW service successfully switch over to stand by/passive node. but if the WWW service is set to
manual and not started on stand by/Passive node then the WWW service is not failing over.
2.) if I kill the WWW service manually (as a test case) on Active Node via this command (taskkill /f /pid XXXX) then the WWW service failed and is not failing
over to standby/passive node.
Any comment will be appreciated. Thanks. Zahid Haseeb.The problem is resolved. I feel that it will be helpful to other people who may face the same problem which I faced, so I wrote a blog on "How to configure IIS Web Site and Application Pool in Microsoft Failover Cluster" and mentioned almost all activities
which I have done. Kindly see the resolution under section "Configure some changes in Cluster Configuration" in the below link
http://zahidhaseeb.wordpress.com/2014/02/12/how-to-configure-iis-web-site-and-application-pool-in-microsoft-failover-cluster/
Any comment will be appreciated. Thanks. Zahid Haseeb. -
Sql services are not able to start in server
We have rebooted inactive the server due to rolling maintenance.
Sql is not running and sql services are not able to start. Getting the below error message while starting the services.
please suggest how to fix?Could you try:
To resolve the problem, use these steps:
Change the startup account of both the MSSQLSERVER and SQLServerAgent to use the Local System account.
Restart the computer.
https://support.microsoft.com/en-us/kb/307288
Or check NetLogon service is running -
Not able to assign the chart of depreciation
Hi i am not able to assign the chart of depreciation, can any one provide me the detail path for the below issue.
Inconsistency between FI company code BHEL and chart of deprec. BHEL
Message no. AC481
Diagnosis
You tried to assign chart of depreciation BHEL to company code BHEL. According to its Customizing definition, this company code manages parallel currencies.
The chart of depreciation does not contain a corresponding depreciation area for each of the currency types that are defined in the company code.
System Response
This assignment is not possible.
Procedure
1. Check the currency types of the company code.
2. Specify a corresponding depreciation area for each currency type.Dear,
Rajesh.
Good Morning !
If your company code is having more than one currency than you will have to maintain that many depreciation areas.
OR
Before assigning COD to Company Code, delete the parallel currency maintained in multiple currencies in global settings.
below is the path:-
SPRO>Financial Accounting>Financial Accounting Global Settings>Company Code>Multiple Currencies-->Define Additional Local Currencies
After deleting you can assign the COD to Company Code.
After assigning you have go back again in define additional local currencies screen (mentioned above) and maintain the parallel currency which you have deleted.
You have first to Assign Input Tax Indicator for Non-Taxable Acquisitions in transaction code OBCL.
Check your parallel currencies in T.code OABT.
I hope this will help you to solve your issue. If you have any doubts feel free to share.
Regards,
Pankaj A Bhalerao. -
Not able to assign ringtone to particular contact
Hello,
I just updated my SE Live with walkman (WT19i) with Android ICS 4. After updation its working fine.
But, I am not able to assign ringtone to any contact. It always shows as default ring tone.
Kindly do needful.
Thanks,
Zinith PatelUse SUS instead
Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
Don't forget to mark the Correct Answers & Helpful Answers
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
Not able to Assign Organizational Units to the Sites
Hi all,
while configuring intercompany billing I am not able to assign the Organizational Units to the Sites.
I am in retail system and maybe here I have to do something else before seting up the intercompany?
Thanks in advance
LHi,
Go through the Building block and their prerequisites
http://help.sap.com/bp_bblibrary/600/html/R01_EN_DE.htm
http://help.sap.com/bp_bblibrary/600/html/R41_EN_DE.htm
Thanks
Chidambaram -
The Urgent Change request is in created status and I am not able to assign project to it. Also I am not able to change the status of the change request to In developement with developer's Id. Everything works fine if i assign SAP_ALL authorization to the developer.
Below are the roles assigned to Developer ID -
SAP_CM_SMAN_DEVELOPER
SAP_SM_CRM_UIU_FRAMEWORK
SAP_SM_CRM_UIU_SOLMANPRO
SAP_SM_CRM_UIU_SOLMANPRO_CHARM
SAP_SMWORK_BASIC_CHANGE_MAN
SAP_SMWORK_CHANGE_MAN
SAP_SOCM_DEVELOPER
Z_S001
ZSAP_SOCM_DEVELOPER
Issue screen -
SU53 for Developer-
Please suggest which roles/Authorization should be assign to Developer Id.
Thanks
KavitaHi Kavita,
Copy these roles to Z-roles
SAP_CM_SMAN_DEVELOPER
SAP_SM_CRM_UIU_FRAMEWORK
SAP_SM_CRM_UIU_SOLMANPRO
SAP_SM_CRM_UIU_SOLMANPRO_CHARM
SAP_SMWORK_BASIC_CHANGE_MAN
SAP_SMWORK_CHANGE_MAN
SAP_SOCM_DEVELOPER
Assign this to user.
Put a stace using ST01.
Find that object and modify/add in your custom role.
Regards,
Divyanshu -
Not able to assign process server to file events.
Hi,
our requirement is we want a file event to be raised when ever a file is uploaded in BW.
when we tried to configured a file event we are not able to assign a process server. when we click on process server our bw process server is not popped up.
i am not clear what setting needs to be maintained in dataroot directory.
Process Server>>Parametes>>Data root directory
or
do we need to set up any platform agent on BW System
please advise.Hi Anthon ,
1)Do we require seperate license for Platform agents and once after downloading the platform agent can we install from CPS side by submitting job definition or this is a BASIS job to install the platform agent on the system where we want the files to be detected.
2)is there any setting needs to be done on CPS side after we intall Platform Agents in the bw system.
Regards
Rajesh Dhaval -
NOT ABLE TO ASSIGN MO:OPERATING UNIT PROFILE VAL TO A RESPONSIBILITY
I am trying to create new orgnization and assigning parameters in AP. I am not able to assign profile values. Could you pl. clarify foll points..
To generate seeded data, it is displaying(in the concurrent program) existing operating unit in the LOV not the new Operating unit that I created.
When i try to associate new Responsibilty to MO operating unit level, it is displaying existing organization not newly created org.
NOt able to assign profile values to business group(field is protected against update) as I created new ORG not with "setup Business Group".
When i click legal entity parameter in operating unit, it is displaying
"NO ENTRIES FOUND FOR LIST OF VALUES"
I would appreciate your early response
Thanks
Ven.
[email protected]Hi Nagamohan
Your query returned me the seeded ones:
GL_AUTO_ALLOC_WF_PKG
PA_AUTOALLOC_WF_PKG
We have a value at the site level, and at the 1st OM super user responsibility having the issue has no default value, hence defaulting the value from the site level.
The other OM super user responsibility has a value. And this value is defaulted to the 1st OM responsibility profile from time to time.
The other responsibility OM Administrator have no problem. This value changes when the users logged into this OM super user responsibilities (both OU), the value switches back and forth to 2nd OU value and then the site level value fills the value for the 1st OM super user responsibility(even though we didn't have any default value before).
If the users logged into 1st OM Administrator responsibility to process the orders, then no problem, the value stays to the correct OU).
We have been relying on the defaulting value(coming from the site level) for all this time and have had no problems until now. It was always blank for the 1st OM super user. but, when the problem started then only it's having issue. I manually deleted the value (wrong value from the other OU) at the 1st OM Super user level, then next time the user logs into the 1st OM Super user resp, then it's having the correct value(same as site), and keep on updating the value with this correct value. But, all of a sudden it changes to the wrong OU value, don't know what object is causing this...
Thanks
Radhika -
Not able to assign Composite Role to Position
Hello All,
I am facing following problems.
1) The user is Not able to see Create Report Links, when i checked the Composite Role in PFCG i found that the in USER Tab Organizational Tab was yellow, i did Indirect Reconcillatin in Organizational Tab and then it went GREEN, then i did User Comparision.
I got this Message
"You do not need to perform Prfile Comparision for role " Role Name".
and the Position was removed.
2) Now i am Trying to assing the Role to Position, i am not even able to assign it and the User id is not coming under User id list.
Please suggest.
Thanks,
CB@Point#1: It could be that user master is already compared for your composite role and no further comparison is required. To double check you might just run the comparison again via tcode PFUD or report RHAUTUPD_NEW
@Point#2: For indirect assigment to position make sure organization management is active in your system (the switch HR_ORG_ACTIVE is set in the table PRGN_CUST to YES).
Thanks
Sandipan -
Not able to see Employee type supplier after upgrade to 12.1.2
We have custom responsibility for Payables Manager, after upgrade to 12.1.2 from 11.5.10, some of the employees are not able to see the Employee Type supplier, but some employees are able to see all. I thought this maybe related to Role so I tried to add the roles that are missing from the employees that are able to see all supplier, but didn't help. Anyone know where to look at this? Thanks in advance.
Hii ,
Can you brief your problem in detail ? What do you mean by Not able to see Employee Type Supplier , is it do you mean in the Lovs ? or which form ??May be I can look into it .
Thanks
vennala -
BI Publisher - SuperUser not able to acces Roles and Permission Page
I have set up the BI Publisher as said in http://gerardnico.com/wiki/dat/bip/configuration_bip.
But
1. SuperUser is not able to access Roles and Permission.
2. I'm not able to access the BI Answers Catalog.
I also have a doubt about the BI Server Admin. Is it the RPD Admin?
Kindly HelpI have set up the BI Publisher as said in http://gerardnico.com/wiki/dat/bip/configuration_bip.
But
1. SuperUser is not able to access Roles and Permission.
2. I'm not able to access the BI Answers Catalog.
I also have a doubt about the BI Server Admin. Is it the RPD Admin?
Kindly Help -
After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.
-
I'm having problems (1) selecting onscreen text, (2) resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.
1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again
Maybe you are looking for
-
Asking for advice--for beginning (but artistic) photographer. Recommend Lightroom 5 or Photoshop Elements 12 (Windows 7 OS)?
-
Hi, Pardon my question, but I'm quite new at this. I'm trying to create a welcome application mentioned in the tutorial. When I selected 'Deploy new archive and run' I got the following message and the IE did not launch. Jul 18, 2004 9:46:40 PM /user
-
Hi all, just a short question about mail forms. We use the mail form for file export, there in the standard attributes you can choose the academic titlle. When you start the campaign with that mail form the system will give you the description of the
-
Display instantly the length of the text entered in the rich text editor
Hi everybody, I'm developing an apex application with apex 4.1.1 and Oracle 11.2. I have a page in which I have a form that allows to create a new message on the database. A message has a title, description, text and date. For the text I use the item
-
I've recently re-built the computer. It's Windows 7 Home Premium and is fully upto date (as far as Windows update in concerned). On top of this a fresh installation of FireFox 5 has been installed. Since doing this (compared to pre re-build) FireFox