Service desk RFC destination in the Satellite system
HI All,
can any body tell me the RFC destination that is to be maintianed in the satellite system so that the message reaches the solution manager service desk.
I am creating messages they are being send to the service desk successfully but are not visible when I go into the service desk of the solution.
But they are visible through the transaction code CRM_DNO_MONITOR .Can any body help the RFC destination to be maintaned in the BCOS_CUST table so that the message reaches the Service Desk.]
Currently I am using the RFC destination to the service desk client in the solution manager ie SIDCLNT200
Thanks in advance
Regards
Amit
Hi Amit,
I think your expectation is not correct. I understood, you can create a message in a satellite system and you can see the ticket in SolMan service desk. Then everything is configured correct. What you are now looking for is to see the ticket in a solution when the sat. system is part of the solution. This is not working. If you create out of a solution a service desk ticket, these ticket get a special attribute that they belong to this solution, all other tickets can not be selected by a solution.
Sorry but I am quite sure that it is working like this.
There is only one option, that you define special variants so you can see only tickets from special systems, but these variants can not be assigned to a solution.
Regards,
uDo
Similar Messages
-
Create user both in the satellite system and in solman
Hi
I wonder if I need to open all my user's that are in the satellite system (ECC) in the solution manager for the purpose of create support message or I can only create them as BP?
If I don't need to open them, What is the proper way to configure the RFC?
Best regard's
Lior GrinbergHi,
in a normal service desk scenario you do not neet to create users in Sol Man. You just create business partners. If you want the users to logon to Sol Man and edit a document then they also need a real user there (linked via BP - employee):
For creating messages from satellite system you usually maintain RFC destinations from Sol Man (SMSY) to the connected systems. Then you use the generated *_BACK destination in your satellite system and add it to table BCOS_CUST.
All these steps and many more are described in IMG in Solution Manager.
Regards -
Service Desk Configuration (Raising message from R3 system)
Hi,
I want to configure my R3 system, so that when I create a support Message it is reflected in Solution Manager.
I have done the following steps, in R3 system
1) Use transaction SM30 and modify BCOS_CUST table.
Entries in this table are
Col 1: OSS_MSG
Col 2: W
Col 3: SOLUTION_MANAGER (Not sure, what is the right entry for this column)
Col 4: CUST620
Col 5: 1.0
I am confused over the entry for Col 3:
In some postings I have seen that the value is SM_<sysid>CLNT<client>_TRUSTED, so assuming my Solution Manager SID is SL3 and Client is 100, the value for Col3 must be
SM_SL3_CLNT100_TRUSTED
Is the above assumption right?
2) Is it necessary to make entries for RFC destination in my R3 system using transaction SM59.
Also while creating the RFC Connection using transaction SM59 in the R3 system, it asks about the type of connection.
Which type of the connection, should be chosed.
Type :: Short text
I :: Connection to application server with same database
3 :: Connection to R/3 System
2 :: Connection to R/2 System
T :: Start an external program via TCP/IP
L :: Reference entry (refers to another destination)
S :: Start an external program via SNA or APPC
X :: RFC via special ABAP/4 driver routines
M :: CMC connection
H :: HTTP Connection to R/3 System
G :: HTTP Connection to External Server
Hope you can help..
Regards,
VikasHi,
The third one is RFC destination which is a way of linking two systems providing there ip and login credentials.
When you create RFC in sm59 tcode you have to provide ip address and login credentials and a name,This name you have to provide in se11 bcos_cust table third field.
You have to create an R/3 or abap connection.check this for creating rfc connection.
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f62cfa8911d386e70000e82011b8/content.htm
Check the following .
/people/federico.babelis2/blog/2006/04/14/service-desk-configuration-guide-for-dummies
in short first of all go to tcode sm59 create a r/3 connection to your server and provide a name to it.
secondly go to bcos_cust table and provide this name in the third field.
Please reward points if it helps.
Message was edited by:
Prakhar Saxena -
Service Desk Determination. In the support message Sold to party &
Dear Friends,
Sold to Party , IBASE & Component are not fetching the support message created from Satellite system BI.
I have configured the Service Desk for satellite system ECC 6.0. Now I have configured it to BI, but Sold to party & IBASE & Component are not fetching in the support desk message.
Following things done for adding satellite system BI to Solman.
1) IBase creation for BI is done.
2) SMSY configiration also done for BI
3) BP no created in Solman, mapped identification also.
What else i need to check.
Can anybody tell me which roles I need to assign the BI end users for raising the message. Is this issue related to roles
Regards
PKHi,
There are several predefined roles for Support Desk, containing specific authorizations.
Rolle
SAP_SUPPDESK_ADMIN Administrator role for Support Desk. Comprises
authorizations to configure Support Desk
SAP_SUPPDESK_PROCESS Role for processing Support notifications. Comprises all the
authorizations for notification processing and using the Solution Database
SAP_SUPPDESK_DISPLAY General display role, no authorization to create or change
notifications
SAP_SUPPDESK_CREATE Role to create Support notifications. This role must be
assigned to both users who will create notifications in the
SAP Solution Manager and to users who will create
notifications from the satellite systems in the SAP Solution
Manager.
Regards,
Deepanshu -
BSP: Use of dynpro services is not possible in the current system status
Hello,
in the component SRQM_INCIDENT_H i created a own button and eventhandler on the overview view.
Here in this eventhandler i´m calling an own method from an own class. This method is doing a RFC in our ERP system.
If i test the method this works fine.
If i call this method in my eventhandler i get BSP error:
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
Use of dynpro services is not possible in the current system status
Exception Class CX_SY_MESSAGE_IN_PLUGIN_MODE
Error Name
Program ZCL_CRM_CS_DATA_SERVICES======CP
Include ZCL_CRM_CS_DATA_SERVICES======CM001
ABAP Class ZCL_CRM_CS_DATA_SERVICES
Method CREATE_CS_ORDER
Line 54
Long text -
Error type: Exception
Any ideas?
thank you
Best regardsHi,
Web-UI cannot handle MESSAGE statements. if it's your own program, you should use the web-ui( view_manager->get_message_container or cl_crm_bol_core's global message container) alternatives to display the messages. If the message statement is being issued by a standard program, it's most usually deliberate attempt to fail on unrecoverable error. You can catch it by usin the try...catch CX_SY_MESSAGE_IN_PLUGIN_MODE ..where you call the standard functions.
Regards,
Arun Prakash -
Hi friends,
Getting the below error in step 10 (configuration check) in managed system configuration.
The SMD Agent is not able to connect the Satellite System (J2EE stack).
Please check the JAVA Connect Parameters provided in the Managed System Setup Wizard for this
System.
java.rmi.RemoteException.P4 Connection failed -
P4AuthorizationException -
com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException:
Access is denied to SAP System sid [XYZ/null]: check the connection
credentials.More details about the error in agent 'xyz' log file
(SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
authenticate the user.
The SMD log file referred to in the log above gives the same information and not anything much useful.
Any idea what could be the reason for the above error?
Thanks,
ArindamHi All,
Thaks for your suggestions. I chcked the note 182020, but the issue described in the note is for error byte code adapter installation whcih is not my case. The byte cde adapter intallation has been successful in our solman system All the steps from 1 to 9 are green. Only in step 10, check cniguration I am getting the above error.
The logon test wth the user id in step 3 "Enter system parameters" is successful. The message server port is also correct.
Hi Khaja,
I went to the links as suggestedby you but there its about a ifferent error message "Invalid Response Code: (401) Unauthorized.". I am not getting any such kind of error.
All I am getting is this -
The SMD Agent is not able to connect the Satellite System (J2EE stack).
Please check the JAVA Connect Parameters provided in the Managed System Setup Wizard for this System.
java.rmi.RemoteException.P4 Connection failed -
P4AuthorizationException -
com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException:
Access is denied to SAP System sid [XYZ/null]: check the connection
credentials.More details about the error in agent 'xyz' log file
(SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
authenticate the user.
Thanks,
Arindam -
CCMS alerts of the satellite system
Copying CCMS alerts available on the satellite systems to Solution Manager. Is this functionality workable to monitor from Solution Manager?
Cheers
RogerYes.. Please search for the documents related to System Monitoring funcationality in SolMan. You can get a lot of documents about that in SDN. As well as seach for a .sim file for this in service.sap.com/rkt-solman.
Rajeev -
CRM70 Use of dynpro services is not possible in the current system status
Hi all,
i programmed in Webclient UI an own button which calls a Method of a zclass. Within this method i do a remote function call in ERP.
I can test the method successfully but if i call it from CRM Webclient UI i have a BSP error:
Business Server Page (BSP) error
What happened?
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
Use of dynpro services is not possible in the current system status
Exception Class CX_SY_MESSAGE_IN_PLUGIN_MODE
Could one of you experts please give me a hind?
Thank you
Kind regards
ManfredSolved,
there was a SAP GUI "MESSAGE" in the ERP function call which is not possible for CRM Webclient UI.
Kind regards
Manfred -
Use of dynpro services is not possible in the current system status
Hi,
I am new to all of this and new to SAP. I will bew self learing my way into CRM SOA, working with the web service creaiton i keep getting the following errlr when rtying to Activate a new created web service:
"Use of dynpro services is not possible in the current system status"
not knowing the system that well i wonderin if there is missing configuration. This is CRM 7.0
Exception Class CX_SY_SEND_DYNPRO_NO_RECEIVER
Error Name DYNPRO_SEND_IN_BACKGROUND
Program SAPLSKEY
Include LSKEYU03
Line 33Hi Keith,
Welcome to the SCN forums!
SAPLSKEY
You should first check your Abap dumps using tranaction code ST22, this usually provides more detail on the problem.
In this case I think it's trying to return a screen (or pop-up message) that can't be handled while activating the web service. The "SAPLSKEY" tells me that it might be licence related, do you have a valid developer's licence for Abap development work? If not apply for one (find out the procedure from other Abap developer's that you may work with) & check if that makes a difference while activating.
Regards, Trevor -
Urgent: sxi_cache on the satellite systems
Hi every one,
The question basically would be how the transaction <b>sxi_cache </b> should behave on the satellite systems.
When I run the tcode <b>sxi_cache</b> on one of the satellite system. I get 2 error messages
1.Unable to refresh cache contents
2.Error during last attempt to refresh cache
Double-Clicking on each of them will give an error-id as <b>"BUSINESS_SYSTEM"</b> but no error-code. In the screen below, it says <b>"NO INTEGRATION SERVER"</b>
<b>PS:Delta-Cache Refresh and Complete-Cache Refresh are disabled on all the satellite systems. I am not sure if this is normal.</b>
reg,
Message was edited by:
naveen chitluriHi,
Check this blog i am not so sure if it will solve the issue.
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
<b>
Cheers,
*RAJ*</b> -
Report to pull kernel patches of all the satellite systems
Hi Experts,
Is there any report in solman system to pull kernel levels of all the satellite systems or is there any process to find out kernel versions of all the satellite systems at a single glance in our solman system.
Our solman system version is 7.0 EHP1 SP6.
Thanks,
VenkataHello Jared,
Fast forward a couple years now. Is this kernel information a feature now in Solution Manager 7.1 SPS8?
Cheers,
Dan Mead -
Scaling your Mapped BW RFC destination to the APS DF Service
Hello Semantic People!
If you are creating a UNX universe connecting to BW through the IDT and you have manually mapped your RFC destination to an Adaptive Processing Server Data Federation Service then you might be interested a new Wiki Page: RFC Connections Mapping Scalability
RFC Connections Mapping Scalability - Business Intelligence (BusinessObjects) - SCN Wiki
and kbase 2028364 - RFC Connections Mapping Scalability:
https://support.wdf.sap.corp/sap/support/notes/2028364Problem resolved once after SAP server is restarted. RFC destination test was also successful and I was able to retrieve data in Web Intelligence
-
Service Desk Message Creation Error on R3E System
Dear Team ,
We are not able to create the message from R3E System.Whenever we are
creating the message from R3E Satellite system ,message is thrown "Error513 , No Message is not created in service Desk." At the same time, in
CRM_DNO_Monitor on solution manager system , I am able to see thismessage without external reference number. This solution manager is
connected to 5 satellite systems where service desk message creation is
working fine.
This problem is occuring only with R3E & R3T System.and it might affect
to R3P production servers also . Kindly look into this as urgent issue
Message creations on R3E systems was working fine upto 12/4/2008.
HR/ABAP/BASIS Patch Application activity was carried out on 17/4/2008 onR3E System.Kindly suggest if this has affected message creation.
Regards,
Pavan.Hi pavan,
Pl check ,action profile assigned for the message type SLF1 (correct: SMSD_ABA_MLDG_SERVICEVORGANG or SLFN0001_STANDARD_DNO) is correct or not also check
Number ranges are assigned correctly.
Assign the points ...
Regards
Chandravilas
Edited by: Chandravilas Sonawane on May 14, 2008 12:13 PM
Edited by: Chandravilas Sonawane on May 14, 2008 12:25 PM -
Find exact RFC Destination for Multiple backend Systems In SAP Gateway
Hi Gateway developers,
I have requirement,if gateway hub system has multiple backend systems( for example two backend systems: ECC and SRM ) then how hub system can get the suitable backend alias for exact entity collection..
Here i have developed two entities one entity regards: ECC and second one regards SRM system..within this when I run the service it is always taking any of the same alias for both the collections..
Can you please suggest me..
Thanks
Sreenivas PachvaHi Srinivas,
You can add the respective system Alias Name: Like logical system name in your URI also.
Example:
/sap/Service Name;mo=ECCCLNT210/zentity1?Customer1='0001'
/sap/Service Name;mo=SRMCLNT400/zentity2?Customer2='ABCD'
May this help you.
Thanks,
Saurabh Gupta -
Step by step guide to connect Satellite systems to SOLMAN....
Hi all,
Can you provide a Step by step guide to connect <b>Satellite systems like (SAP CRM, SAP ECC 5.0 Etc..) to SOLMAN</b> and also what are the major config steps involved in connecting a satellite systems to Solman.
The connection is basically to monitor key performance issues of the satellite systems through Solman....
Need ur inputs on this...
Thanks and Best regards,
SubbaHi,
In a system landscape you can only add logical components. Please double click on the name of the logical components. You will arrive in the maintenance area for logical components. There you can add systems to your logical components.
Check the following links also.
satellite system
Solution Manager - How to connect to satellite system ( refer this)
Re: Service desk RFC destination in the Satellite system
Re: Satellite Logon
Regards,
Note: Points always encourage me to reply !!
Maybe you are looking for
-
IPhone does not appear in iTunes - Mac / Lion
Hello all , Well the title says it all - it is specific to iTunes though, iPhoto recognizes my iPhone and imports photos without issue. I have done all known Apple procedures, trouble shoots - everything. I have the latest iTunes and am about to r
-
macbook hard drive crashed, i lost windows for mac, bought a disc when i got the mac, no longer have the disc, need my apps, don't wanna pay for it again. know how to get it quick without having to give my mac to the genius bar at apple store overni
-
im not too sure how to solve this as im rather new to the mac OS. itunes keeps relaunching a few minutes after i quit the program, is there somewhere to reset the settings to default or 'reinstall' itunes? help much appreciated Powerbook 12" Mac OS
-
Hi, I am trying assign settlement type AUC to the WBS element with category FXA(Fixed assets). But i am getting an error 'Enter Valid Value for Settlement type'. I can only see settlement types 'PRE' and 'FUL' , not AUC. since the Asset is defined as
-
How to Enable Custom Java Scripts for forms in Planning 11.1.2.2
I am working on Planning 11.1.2.2 right now. Planning admin guide says, there is no explicit requirement to enable java Script for planning forms. I set simple alert to see text "Hello World" in function validateForm() function in custom/validateData