Service details are not copying from contract to Maint.Order

Dear Experts,
I was doing a service contract cycle, with the following steps.
1. Created a Service contract, in T. Code ME31K.
2. Given all the details in the Header data of the Contract.
3. Mentioned the, Item category as D (Service), Account Assignment as F (Order), short text, Target Quantity, Material group, Plant and Storage Location in the Item Overview screen.
4. Given the Service Number and Quantity, Gross Price, Cost Center and GL Account.
5. Saved the Contract.
6. After released the Contract in T. Code ME35K.
7. Then created a Maintenance Order through T. Code IW31.
8. In the Operation Overview screen of the Maintenance Order, the control key is given as PM03 and clicked on External button of the Maintenance Order.
9. In the External Processing Operation screen the Contract Number and line Item is mentioned in the Agreement Field.
10. System given a message Data copied from contract.
11. All the data copied excepting the Service details of the Contract.
Here the Service Number and its details which were mentioned in the Service specifications of the Contract are not getting copied from the Contract.
What could be the reason for that? Did I perform the transaction properly?
I have searched the forum earlier for the same but could not get any required information.
Can any one help me out on this??
Thanks and Regards,
Praveen
Edited by: b praveen savan on Jan 31, 2008 2:33 PM

Select the services from the service selection button, then click on current spec, all the services which are under contract will be displayed. select your required services or copy all services.(Click on adopt services)

Similar Messages

  • Net weight of the material is not copying from contract to sales order

    net weight of the material is not copying from contract to sales order?
    plz help me

    Hi,
    If the *CONDITION VALUES* are *manually* entered then the values will not be copied from the *SOURCE TO TARGET* document
    Please check in the  Contract whether the vales derived from Condition records are entered manually.
    If you want the prices to be copied automatically then they have to maintained through CONDITION RECORDS in *VK11*.
    Please maintain the CONDITION RECORDS and check whether they have copied or not
    Please also cehck the COPY CONTROLS from CONTRACT to SALES ORDER in VTAA transaction -- at item--->pricing type. and set it a s  D
    Please check the above settings and let forum know the feedback.
    regards,
    santosh

  • Price not copying from contract to maintenance order in IW31

    Hi Gurus,
    I am facing issue in one of the client where Price is not copying from contract to maintenance order in IW31. But while doing the same in another client it is working fine.
    I did not find the settings for this change. Can any one please help me for which settings price is not copying to IW31 transaction?
    Thanks in advance!
    Best regards,
    Karun Kumar

    hi
    i think if you have assinged the contract the servies will not copied ,for this in the external tab select the serice selectionbutton ,here specify the agreement from their select the serives you required
    regards
    thyagarajan

  • PO number  not copied from Contract to Sales order

    Hi Gurus,
    when i try to create a sales order w.r.t a contract the Po number is not copying from cintract to sales order.
    also the PO item is not copying from contract to sales orde.
    Could u tell me the reason.
    Cheers,
    Sumith

    Hi Sumith,
    I'm not sure though but try this one this might jus help.
    Go to VTAA,
    select the target & Source doc type.
    Go to header and check the COMPLETE REFERENCE CHECK BOX,
    Which says it copies the whole of the reference doc from the
    source doc to the target doc.
    I jus hope this will sole your problem.
    Cheers!!
    Nitin

  • Condition Type is not copying from contract to sales order

    Dear All,
    The value the i am giving in the sales contract is not copying into sales order. Sytem again asking to enter the value.Is there any setting to be done forthat.
    Regards,
    Suresh Yadav.

    Hi,
    If the *CONDITION VALUES* are *manually* entered then the values will not be copied from the *SOURCE TO TARGET* document
    Please check in the  Contract whether the vales derived from Condition records are entered manually.
    If you want the prices to be copied automatically then they have to maintained through CONDITION RECORDS in *VK11*.
    Please maintain the CONDITION RECORDS and check whether they have copied or not
    Please also cehck the COPY CONTROLS from CONTRACT to SALES ORDER in VTAA transaction -- at item--->pricing type. and set it a s  D
    Please check the above settings and let forum know the feedback.
    regards,
    santosh

  • Sales office and sales group are not copied from quotation to sales order

    Hi All,
    I have maintained sales office and sales group in quotation maually at header level.while  coping to sales order sales office and sales group are missing.
    Please let me know what would be reason for missing those twoand whether i should check anything in copy controls.
    Regards
    Mohan

    As its a standard functionality to have the Sales Group & Sales Office from Quotation to Order. But in your case, check the Copy Control settings at Header Level .
    DataT 051 General header data       Copying requirements 001 Header-same customer
    DataT 101 Header business data
    DataT 001 Partner header
    In case , they are also same, then check if any Logic is added in the Existing Routine.
    Best Regards,
    Ankur

  • Partner details are not getting captured to the purchase order from the ven

    Hi,
    Issue : ( ECC PO)
    Partner details are not getting captured to the purchase order from the vendor master.
    We found that the partners are not getting captured in ECC PO's automatically from the vendor master. We checked for all the config and everything seems to be o.k, but could not figure it out.
    Any suggestions are highly appreciated.
    Regards
    Sudhakar

    Hey Sudhakar,
    I believe what is happening here is that the ECC PO document type has not been assigned to the partner determination procedure.
    If this is working properly for standard POs, then,
    Go to Partner detrmination under Purchasing>  Partner Settings in Purchasing Documents> Assign Partner Schemas to Document Types.
    and enter teh appropriate document type and refer it to the procedure you have for NB Pos

  • VKGRP should copy from contract to sales Order

    Hi Guru's
    I have a problem related with copy control from contract ot sales order. sales group should copy from contract to sales Order while Sales order reffers to customer Master. In contract sales group comes from Customer Master, after saving the contract if i change the sales Group and create sales order with reference to contract. sales group doesn't get updated from the contract. system refers customer master only.
    Any suggestions
    thanks,

    Hi,
    I see that you can address this in following ways.
    1. copy control between Sales order - Contract - header level routine.  Here you may be able to influence the copy of the customer group details.
    2. You can use the user exit which will trigger during Contract creation ( Move field to VBAK) or you can think of using save_prepare user exit.
    Thanks & Regards,
    CLN

  • Discount pricing is not copied from Qoutation to Sales order.

    Hi All,
    Issue:
    Discount pricing is not copied from Qoutation to Sales order.
    Please suggest the correct copy control/Routine programs which i can check to proceed furthur.
    Points will be rewarded.
    Regards,
    neslin.

    kindly check in the price determination  whether you have assigned the quotation document pricing type ? simmilar like the sales order type you have assigned ?

  • Pricing not copied from qoutation to Sales Order.

    Hi All,
    Issue:
    Discount pricing is not copied from Qoutation to Sales order.
    Please suggest the correct copy control/Routine programs which i can check to proceed furthur.
    Points will be rewarded.
    Regards,
    neslin.

    kindly check in the price determination  whether you have assigned the quotation document pricing type ? simmilar like the sales order type you have assigned ?

  • Exchange Rate is copied from Contract to sales order

    Dear SD Guru,
    Good Day!
    I have an issue with the currency. The sales order picks up the exchange rate in the contract and it might not be correct.
    The contract was created a year ago and the sales order is still referring to the old exchange rate because the pricing date in the sales order is copied from contract.
    Is there any way to not copy the pricing date over to sales order and let the sales order picks up the currency table OB08?
    Thanks,
    CC

    Hi There,
    What i suggest is to create one routine at Item level in VOFM and maintain that routine in VTAA copy control at item level.
    In sales order the details are copying based on your copy control settings. Please also ensure is there any existing routine for determining the new values from sales order.
    Thanks,
    Raja

  • Item number to be regenerated when copying from contract to sales order

    Hi,
    I am copying items from contract to sales order, say there are 10 items in contract. I copy all items leaving 5th & 7th item in contract. The numbers in sales order has to be in sequence (regenerated leaving the 5th & 7th line item) rather than it is copying the line item number as in the contract. Can any one kindly suggest me how to handle this in sales order.
    Thanks
    Ghanesh

    Hi,
    In VTAA
    QT to OR at header level
    REMOVE TICKMARK OF COPY ITEM NUMBER
    Then system will genrate new item numbers in targer document.
    Kapil

  • Letter of Credit not copying from Quotation to Sales order

    Hello,
    I have attached a LC to a Quotation. When i am making an order with reference to the Quotation, the LC is not copying from Quotation to the Sales order. Kindly help.
    Regards,
    Shahzad

    Hi,
    Did you want to say that you have maintain some text in quotation and that text is not copying to the sales order some thing like that?
    So I suggest you to check your setting by going to the following Tcodes.
    VOTXN over there you can define the text types.
    And you have to assign you text determination procedure to the order also.
    If you want that text to be copied to the billing also then assign the procedure to the billing doc.
    If you have assigned properly your procedure then it will copy the document.
    Regards
    Raj.

  • PLD Details are not copied using Copy Express

    Hi,
    I am unable to copy Print Layouts from one database to another database using Copy Express.It is not copying the contents.Can somebody help?
    Thanks and Regards,
    S.G.Sekar

    Hi,
    Try this method to copy pld....
         Open the PLD and edit Ctrl+A Copy the PLD from one data base and choose company(Don't use another sap db for pasting at the time open only one sap) change company and open any pld and Ctrl+A delete old and Paste. The same PLD will come here.
    Regards,
    Sudhir B.
    Edited by: B.sudhir on Nov 23, 2011 11:27 AM

  • Supporting details are not accessible from SmartView client

    Hi All,
    For one of our users Supporting detail functionality is not available using SmartView client. While clicking on Supporting detail option in excel, the bar is showing hour glass but never displaying the supporting detail window. We reinstalled the client but with no success. We are not sure what is causing this issue. Kindly share your thoughts around the possible causes.
    P.S - We asked the user to go to planning web for the time being.
    Thanks,
    Praveen

    What versions of software are you on? Smartview / Excel etc
    If other users are fine and share common software versions, then this would point to something on the client machine....have a try of disabling all add-ins except Smart View to see if anything is conflicting?
    I assume the behaviour is the same whether trying to interact with already existing supporting details or creating own?
    JB

Maybe you are looking for

  • Discount in CF 9 Exam registration for developers certified in CF 8

    Now that CF 10 is out, I wish to go for the CF 9 exam. Do you get a discount-voucher if you are already certified in CF 8? If so, please kindly point me to the relevant information. I wrote to Adobe and Pearson VUE. Months have passed: no response.

  • Enable Commenting & Measuring in Acrobat 10 and 11

    What does the "measuring" refer to in File | Save As Other | Reader Extended PDF | Enable Commenting & Measuring in Acrobat 11? (BTW, it was Comments | Enable for Commenting and Analysis in Adobe Reader in Acrobat 9. The path was similar to 11 in ver

  • IPhone 4 pictures bad quality?

    I recently got a new iPhone 4 and noticed that the pictures are mostly overexposed and sometimes the edges of people distorted, what coul be the problem? With my l old iPhone 4 I always got great pictures. Is the iPhone deffect or is it a hardware pr

  • I can't find my device in iTunes

    I plug in my phone on iTunes but I dont see it anywhere in the bar.

  • HT2476 Copy and paste images?

    After copying images have problem pasting like in email etc