Service Enabled Procurement Scenario

Hi, we are trying to access the Service Enabled Procurement Scenario from a laptop on the Discovery System but we get a "503 - Service Unavailable"
WebShield® appliance hvs04c reports cannot find server or DNS error.
Does anybody know about this error?

Hi,
Please check what is the IP address of your discovery server.
then go to your laptop, navigate to the file: C:\WINDOWS\system32\drivers\etc\hosts
and add the following line in the end of the file:
<DS IP address> iwdfvm2160.wdf.sap.corp iwdfvm2160
<DS IP address> is the IP address of your phisycal DS server
Regards,
Amir

Similar Messages

Question on Self Service Procurement Scenario?

Hai friends
Self Service Procurement is used for automatic generation of PR and shop on Behalf of.
So how is SSP possible in creation of PR in extended Classic Scenario
Is SSP possible in Classic Scenario only? If its possible in all scenario then what is the use of Self Service Procurement
Regards
krishna

Hi Krishna,
SSP (Self Service Procurement) scenario is possible in both, Classic and Extended Classic Scenario's. In classic scenario, the follow-on doc. say PO created w.r..t SC will be created in backend system and in case of Extended Classic Scenario, the PO will be created in SRM and a copy will be posted to backend.
PR can be replicated from backend to SRM system in both the cases. It falls under Plan-driven procurement business scenario.
In extended classic scenario, if you want to replicate the PR to SRM, it can be listed in sourcing cockpit as an external requirement and ca be processed further to follow bidding process in SRM.
In classic scenario, you can configure to create a SC in SRM and transfer it to the backend system to create PR / PO as a follow-on document.
I hope this answers to your question.
Regards,
Prashant
Do reward points if questions are answerd

ATP Check for service parts and procurement scenario

Dear Experts,
We're testing CRM service scenario, focusing on the ATP check.
After running the avaiability check for the service parts in the service order,
is it posssible to determine the scenario automatically as follows?
- when the necessary parts items are not available
-> "Procurement" scenario will be used.
The corresponding documents such as PO, PR or Reservation will be generated in ERP according to the setting "Define Logistics Scenario for the Procurement of Materials and Services".
- when the necessary parts items are available in stock
-> "Material withdrawal" scenario will be used. The items will be withdrawn at the service confirmation.
From our understanding, the determination of the above scenario is controlled by the item type(ex.SRVP),
so we expect that the system sets the appropriate item type depending on whether the item is available or not.
Is there any possible solution for this?(i.e.standard customizing, BAdI etc....)
Any advice would be higly appreciated.
Best regards,
F.T.

Hi F.T,
I have worked in Service Order Management Scenario, but not integration of Service Orders for ATP Check. But I found this Presentation which I hope might be somewhat helpful regarding the feasibility of the Business Scenario. You can have look at the same and will be able to decide if this is the correct way forward or not.
[Presentation|http://www.google.co.in/#hl=en&biw=1366&bih=548&q=ATPCheckforservicepartsandprocurementscenarioinSAPCRM+++&aq=f&aqi=&aql=&oq=&gs_rfai=&fp=a254323013e5943b]
Hope this will help.
Thanks,
Samantak.

Plant Driven Procurement scenario in SRM Throgh XI.

We are doing plant driven procurement scenario in SRM through XI7.0
(ECC 6.0 (MM)- XI7.0 -SRM5.0 SUS)
1.we downloaded XI Content for SRM Server 5.5 SP 12.But we are unable
to find out SAP ECC 6.0 Software component Versions or Product version
in SAP XI 7.0 SLD.
Please, Suggest the solution to solve this problem.

Hi Prateek,
I am doing Plant driven procurement service enablement scenario by using XI 7.0, for this,
we are integrating MM & SRM SUS Through XI 7.0 (MM -- XI-- SRM SUS).
For doing this Scenario,
1. Downloaded XI Content for SRM
2. Imported XI Content into the IR
3.After importing, Plan_Driven_Procurement_SupplierEnablement Scenario was enabled.
Here, MM side SWCV is R/3 4.6 is available by default. but in my case i need to change to ECC 6.0(bcoz,currently we r using ECC 6.0 version )
In SLD, there is no ECC 6.0 version.
So, how to solve this issue.
Thanks in Advance.
Mahesh

Cannot send the approval form by PDF in the procurement scenario

Dear Experts,
There is a problem with the PDF in the procurement scenario in Discovery System V3. I am using Japanese version of the DS.
I can send the sales order which is the adobe form in the portal (log in by proc_sales).
But when it comes to approving the procurement request (log in by proc_admin), when I click on the send button, an window pops up which says 2Cannot handle content type: text/html "
I googled and it says if my version of Adobe reader is correct.
I have installed Adobe Reader 7.0.9. (so is written in the business scenario script).
Any advice will be very much helpful.
many thanks
Sudeep

Hello Sudeep,
Please follow this URL to open a CSN ticket : [https://service.sap.com/message|https://service.sap.com/message]
When you open the message,you will be required to choose the category(component) under which to open the ticket . Please place your support message under the component CA_SOA_DS- this is the component used for Discovery System related messages.
Thanks,
Deepa

WebLogic 10.3.0, web-service enabled session beans, and CMT transactions

Does WebLogic 10.3 support CMT for JAX-WS Web-Service enabled EJB 3.0 session beans?
When a client invokes the following Web service:
@WebService
@Stateless
@TransactionManagement( TransactionManagementType.CONTAINER )
public class TestService
    @WebMethod
    @TransactionAttribute(TransactionAttributeType.REQUIRED)
    public String echo( @WebParam( name = "param" ) final String param)
        Context context = new InitialContext();
        TransactionSynchronizationRegisttry registry =
          (TransactionSynchronizationRegistry)
            context.lookup( "java:comp/TransactionSynchronizationRegistry" );
        registry.putResource("foo", "bar");
        return param;
}WebLogic throws this exception:
SEVERE: Transaction does not exist
java.lang.IllegalStateException: Transaction does not exist
     at weblogic.transaction.internal.TransactionManagerImpl.putResource(TransactionManagerImpl.java:2033)
     at weblogic.transaction.internal.TransactionManagerImpl.putResource(TransactionManagerImpl.java:2029)Is this a bug in WL 10.3.0?
Thanks in advance.
Edited by: user572625 on Aug 18, 2011 12:29 AM

This is fixed now. Someone had defined a Servlet for the web service in web.xml that was preventing the EJB container to kick in.
Edited by: user572625 on Aug 25, 2011 11:54 PM

Error while testing Service enabled Application module-ADF11g

Hi All,
I am facing an error while testing Service enabled Application module.I have followed the documentation avaialble in this link
http://download.oracle.com/docs/cd/E14571_01/web.1111/b31974/bcextservices.htm#CJABABJE.
All the supporting jar files are included in the calling application, but still I am getting class not found exception.
Error is as follows…
JBO-29000: Unexpected exception caught: java.lang.RuntimeException, msg=java.lang.RuntimeException: java.lang.ClassNotFoundException: demo.model.common.serviceinterface.AppModuleService: java.lang.RuntimeException: java.lang.ClassNotFoundException: demo.model.common.serviceinterface.AppModuleService
Jdev version is 11.1.1.2.0 and
Build JDEVADF_11.1.1.2.0_GENERIC_091029.2229.5536
Any pointers for the same is highly appreciated.
Thanks,
Anusha

Hi Willian,
Did you set up your "Model" Project to use the JDK 1.4 and rebuild the application ?
See " [Deploying to Application Servers That Support JDK 1.4|http://tinyurl.com/lfc6kc] "
Regards,
Didier.

HP Web Services enabled, but info sheet not printing

Hi all
Just installed my new LaserJet Pro MFP M128fw and networked it with a static IP to suit my network.
Printer is accessible to ALL computers on the network.
Can print, scan, copy and fax without ANY problem from any computer. Can ALSO print from my networked mobile phones.
ALL computers, mobiles and my new HP printer are configured with static IPs. ALL have DNS of 8.8.8.8 and default gateways installed.
NO problem accessing the net from any one of the computers or mobiles.
The printer is web service enabled and I am able to access the printer's web page from my computer wirelessly AT WILL.
I can enable web services (successful enabling from both computer OR Printer) WITHOUT any problems. Able to view the email address sent by HP's ePrint service BOTH on the computer AND on the printer.
Problem:
Then comes the problem - I am unable to print the Information Sheet which contains the code to register my printer on the HP ePrint Website. Have tried entering the printer email ID (characters before the @) at the printer registration prompt, but the website says that it is invalid, because apparently, the Information Sheet print out on MY printer is required, to complete the registration of my printer for the HP ePrint services.
Have tried removing web services from the printer and restarting and re-enabling. Have tried shutting down my router and restarting. Have tried at various times over the past 48 hours just in case it was an HP website overload. When I try to print the information sheet directly from my printer, it goes into perpetual "Connecting..." until it just goes off. NOTHING WORKS!!! NO ERROR MESSAGES!!! JUST NOT PRINTING THE INFORMATION SHEET.
Am now beginning to feel that perhaps the EPrint service is not available for India, but can't seem to locate that information on the HP website. If so, would DEFINITELY look at it as a lacuna / default in terms of clarity and consumer service, as this was one of the principal reasons for my purchase of THIS particular model. Believe me, it wasn't cheap.

Hi Gappu,
Thank you for the updates.
I can definitely understand your reluctance to change how your network is setup. If you are like me you’d get started doing it and someone would interrupt enough that you don’t remember where you were when you were interrupted and something simple but important gets missed.
I have included a link by @VisionAiry titled Check the Anti-Virus for Blocked Ports and Timed Scans and it is regarding the ports that are used. I’m wondering if one of the ports might not be configured correctly for ePrint.
Please let me know how it goes.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

File Service to IDOC Scenario

HI ,
I am trying file service to IDOC scenario and iam getting following error "Unable to convert sender service FilesService_FILE2IDOC to an ALE logical system".
Here file has to be read and IDOC has to be posted in SAP system. Sender is not an SAP system / 3rd Party system ...itz an FILE sender service.
Settings i have done:
In Message Mapping in target IDOC structure i have disabled Control record
In integration directory IDOC Receiver Communication channel i have not selected "Apply Control Record values from Payload".
In receiver determination in header mapping i have put sender sevice "FilesService_FILE2IDOC ".
But still i receive the same error.
I do not want to send control record parameters in Message Mapping .
Pls throw some light on this ....
Regards
Sri

Hi Sridhar,
Regarding your error, below is the answer...
When you create the business system (in the SLD) you assign a "logical system name" or "ALE name". That is used as the ALE name for transporting IDOCs, and the sender system.
You have to also maintain this name in the R/3 System (tx. SALE, WE20), because IDOC will be noted as arriving from that system.
You also told that you dont want to pass the control records value....Do this, just deactivate the control records segments in your message mapping... let me not explain it further.... just check these blogs below for the same,
/people/sravya.talanki2/blog/2005/12/02/manipulating-idoc-control-records-from-payload
/people/michal.krawczyk2/blog/2005/09/01/xi-idoc-adapter--edidc40--demystified
And also go thru the following links to get a better idea about partner profile:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b833243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7cd343d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/32/692037b1f10709e10000009b38f839/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5e/b8f8bf356dc84096e4fedc2cd71426/frameset.htm
I hope this helps you solve your problem.
Regards,
Abhy

Web Service to FTP scenario - MAPPING.NO_MAPPINGPROGRAM_FOUND error

Hi,
I am developing a Web Service to FTP scenario in XI, I am testing the interface by writing a client program using AXIS. when I invoke the service from the client, it is able to hit the service and writing the file to FTP with the data However the client is program receiving a fault with the below error.
"SystemError:<context/><code>MAPPING.NO_MAPPINGPROGRAM_FOUND</code><text>Unable to determine name of mapping program</text>"
I set quality of service to 'Exactly Once' on the SOAP sender adapter.
Would appreciate any help on this.

Hi,
What is the URL to which you are posting the SOAP message?
Is it?
http://<host>:<j2ee-port>/XISOAPAdapter/MessageServlet? channel=<party>:<service>:<channel>
If yes, then like mentioned the QOS is picked from the Sender SOAP adapter.
But, if the URL is ,
http://<server>:<ABAP-port>/sap/xi/engine?type=entry&version=3.0&Sender.Service=<YourService>&Interface=<YourNamespace>%5E<YourInterface>
Then you need to give the QOS as <b>,&QualityOfService=ExactlyOnce</b> appended to the above URL.
More, /people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
Regards
Bhavesh

Web Service to IDoc scenario: No receiver could be determined error

Hi. I am working on a web service to IDoc scenario. I am receiving this error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I've taken the XML message being sent to me and tested the mapping and I've completed the test configuration in the IB. Both work fine. Any ideas? I've been looking into this for a couple of days, so I've been through all the previous posts I could find.
Thank you.
Nicole

hi,
This is not related to receiverdetermination ,whether you creaeted or not.
It is somthing related to receiver systemwhich was configured in Receier determination.
check the target BS is correct or not or the inbound interface.
Did you configured the proper receiver technical system..
OR
Check the Receiver Determination is configured correctly. i.e R/3
Verify all the configurations like SM59, Partner Profile/Logical systems. etc. Also check in SM58 of R/3 system.Make sure that All the objects are activated in the Directory.Refresh the cache.Verify is the business system is pointing to correct R/3 system . Go to Business system/Service->Menu->Adapter specific identifiers in the directory
You can test your configuration with sample
payload.
In ID goto to TOOLS -
> Test Configuration for testing.
Hope in this way you can still find at which point the interface goes wrong.

How can I verify the SSL service enabled in CSS and SCA ?

I'm working for the OpenSSL vulnerability for CSS and SCA. How can I check if the device enabled the SSL service ?
- https://x.x.x.x --> cannot access.
- telnet x.x.x.x 443 --> I got a blank screen. I think this should be connection rejected if no SSL enabled.
Please guide me what command should I issue on the device(CSS and SCA) to verify the SSL service enabled ?
Thanks,

To see what ports are being listened to.
On the SCA, you can do "show netstat"
On the CSS, you would go into debug mode and do
symbol-table load
shell inetstatShow
Michael

Web services enabled RFC for SO creation in SAP 5.0 is not responding

Dear Members,
Third party application is not able to getting response from SAP R/3 web service enabled RFC.
We have created a RFC for creation of Sales order by passing mandatory values into SAP thorugh third party application from outside SAP. Accessing RFC in SAP through Web service is not sending response properly. However Sales Order is getting created in the SAP system perfactly, in return to third party application to out side SAP through web service throughing an Exception.
As standalone RFC in SAP, which is creating Sales order perfactly.
Here we have deleted web service of RFC many times and recreated also, still the problem is not get resolved.
Web services is got configured perfactly in the SAP, because other RFCs are working fine.
Please someone suggest how to resolve this issue in case of Sales Order creation through web service enabled.
Sudheer

Hi ARC,
Here the issue is that, Sales Order is getting created but while sending the Order num. to Webpage through web service then rasing below Exception.
Runtime Error UNCAUGHT_EXCEPTION
Except. CX_SOAP_CORE
Date and Time 07.05.2008 20:13:24
ShrtText
An exception that could not be caught occurred.
What happened?
The exception 'CX_SOAP_CORE' was raised but was not caught at any stage in the
call hierarchy.
Since exceptions represent error situations, and since the system could
not react adequately to this error, the current program,
'CL_SOAP_TRANSPORT_EXTENSN_ROOTCP', had to
be terminated

Enable Web Service access for a Web service-enabled client

Hi,
I want to access data in Oracle CRM On Demand from a Web services-enabled client. The "Oracle Web Services On Demand Guide" suggest the Web Services Access should be granted by Customer Care representative. By default, this access is enabled for the Administrator role for new companies. However my admin account can't access web services from a web enable client.
Can anyone please suggest me the setting/step that i need to enable Oracle On Demand Web service access from a Web services-enabled client?
Note: I am new to oracle on demand so my query can be a silly thing.
Thanks & Regards
Ravish

I was able to resolve this issue. Actually, i was trying with trial account that don't allow the OCOD web service integration.

WEB SERVICE TO ORACLE SCENARIO

Hi all,
I have to develop a web services to Oracle scenario. My problem is that I need to executed selects and stored procedure at runtime in the mapping. I mean that i need to check some values from the inbound during the mapping execution I did that before in Sap R/3 but i don´t know how to execute it in a Database.
Many thanks for your help!!!
Regards
Noelia

hi,
you can use standard API to do this lookup in
the mappings:
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Service Enabled Procurement Scenario

Similar Messages

Maybe you are looking for