Service entry against expired outline agreement

Hi Everyone,
Is it possible to raise a service entry sheet against an expired outline agreement?
Thanks in advance for your responses.

If you can see the validity end date is over in purchase order.
Then you might have face the message SE242 - Runtime of entry must fall within runtime of purchase order (& - &).
But you can continue by configuring this message as warning.
In short, yes, you can create Service entry sheet with regards to this purchase order, which has created with regards to contract and the contract is expired..

Similar Messages

  • Invoice & Service entry against PO

    Hi All,
    I need BAPIs for creation of invoice against purchase order and creation of service entry against purchase order. Please let me know at the earliest.
    Regards,
    Lad.

    See example of creating service entry sheet....
    http://anu-sapdiary.blogspot.com/2007/10/using-bapi-bapientrysheetcreate-to.html
    http://abapeasy.blogspot.com/2008/02/bapientrysheetcreate.html

  • Against Global Outline agreement GR and Invoice  to be posted in SRM

    Hello,
    Created the global outlineagreemnt in SRM then created the release order in R/3 against the GOA now is it possible to post the GR and invoice in SRM ? if not why?
    Thanks in advance
    regards
    sapmm

    hi
    You can create a GOA in SRM and push into purchasing contract in ECC and PO can be created via PR or SC and these PO rrelease will be communicated to SRM system too.
    you can informally put GR and Invoice in SRM system but really posted in the backend. just passing the web portal input by the good recipient / accountant and these data comes via idoc and posted in ECC side and these status updated in SRM shopping cart via batch jobs.
    You can create a bid invitation in SRM and you can create a follow on docuemnts in backend system
    In CLassic
    since Bid Inviatation and BID are SRM Businsse objects -
    PO and Contracts are ECC Businsss Objects
    good luck
    muthu

  • Service entry without an entry date/not linked to goods receipt/invoice?

    Dear Gurus,
    I created a service entry against line 10 of PO. When viewing the service entryu2019s u201CAccept. Datau201D tab, there is a document date and a posting date.
    When viewing the u201CHistory tab,u201D the created dated is 01/12/11...
    When viewing the POu2019s u201CPurchase Order Historyu201D tab, the Service Entry does not have an entry date Additionally, when I go to the u201CGR/IR Assgtu201D view, the service entry is at the very top of the view But the goods receipt and invoice processing document are at the bottom, grouped together, but without the service entry.
    Please help as why is it happeing like this?

    Dear Gurus,
    I m creating service PO and later on doing service entry sheet w.r.t the PO...in service entry sheet, i m entring entry date, posting date and all other relevant informations...and saving the SES and later on releasing it...
    after this, I am going to PO history tab, there i m seeing the SES number but entry date field is missing...
    May i know the reason?
    Pls help...

  • Version created but not set and still Service Entry posted.

    Dear All,
    In one case I found that PO price changed by user for a service PO,version created but user forget to set and saved the purchase order.Other user post service entry against same PO and while releasing by final approver it gave error message"Purchasing document xxxxx, Version X in process. message number MED014"....My question is how i can restrict to post service entry in such case? In stead giveing error message while releasing the service entry i want to control it it in first stage only....
    Please Guide....
    Regards
    Sachin

    Hi Sachin,
    Creating a SES is a kind of drafting and it does not have any Financial impact. However, when you accept the SES, system does posting followed by financial account updates. This is the reason why system prevents accepting SES but allowing SES creation.
    So, unfortunately, this is the standard behaviour.
    Regards,
    Purnima.

  • Mass acceptance of service entry

    Dear all,
    Could you please tell me how to mass acceptance of service entry.  No release strategy has been maintained. 
    But ML85, need to input release code.
    many thanks in advance!!
    cheers,
    Dragon

    Hello Kumar,
    Sorry I should use collective acceptance of service entry.
    During data conversion we have upload service PO and create service entry against the PO using upload program.
    And now I want to accept all the service entry collectively.
    How come ML85 can accept all the service entry w/ release strategy.  But cannot accept the service entry w/o release strategy.
    Many thanks!!
    Cheers,
    Dragon

  • Accounting entry against Excise invoice not created  for Service Tax sales

    Dear all,
        I am facing one problem related to accounting entry against excise invoice not created, for service tax sales scenario in SEZ plant.
    Accounting entry against billing document is generated,which contains revenue account-Debit entry,service tax 10% --Debit entry,ECS-Service tax 2% --Debit entry, SECess Service Tax 1% --Debit entry & Sundry Debtors (Reco)  - Domestic(Customer receivable reconciallation) account-Credit entry.
      But after generating excise invoice, accouning entries not generated for clearing of Cenvat suspense entry(i.e.service tax 10% ,ECS-Service tax 2% , SECess Service Tax 1%) which is generated during billing document.
    Plz. suggest step by step guideline to resolve this issue.
    Thanks & Regards,
    Mukesh Pardeshi

    Hi ReazuddinMD,
    thanks for your reply and support...I checked all the entries/accounts maintained correct.. but the Accounting entrys against Excise invoice not created..
    Now i am geeting error as below at the time of saving Excise invoice,
    No account is specified in item 0000000001
    Message no. F5670
    Diagnosis
    No account was specified for account type "S" in item "0000000001" of the FI/CO document.
    System Response
    The Financial Accounting program cannot process the document.
    Procedure
    A system error has probably occurred in the application you called up. Check the data transferred to item "0000000001" of the FI/CO document.

  • Service contract from outline agreements

    Hi MM gurus,
    my requirement is tht i should send a Machine for repair to an outside vendor..the requirement is triggered from PM-Order..
    i should make a contract with tht vendor say for a valu of 10000/-..could anyone suggests me hw can i map this,,,from receiving the PM order to MM,,thn sending the machine to vendor,,receiving and isssuning to machine against the Order,,
    hw shld i map this...
    thanks in Advance,,
    ganesh kumar

    Hi
    Follow the bel
    1. create contract in tcode ME31K, with account assignment category F.
    2. Create Service Master in AC01 transaction.
    3. Create the Maintenance order in IW31.
    4. Enter the Control key PM03 (control key with service indicator on) in the order.
    5. In the opertaion details of the order you have to enter the service master number which you have created.
    6. System will create Purchase Requisition in the Order automatically.
    7. Create PO(ME21N) with reference to the PR.
    8. Send the Machine to Service Provider with returnable gatepass.
    9. Do the Service entry sheet (ML81N)against the PO when you receive the machine after repair.
    10.Finally transfer the machine to the respective area.
    Hope it helps.
    Regards
    Bala

  • Transfer time from CATS to SERVICE entry sheet against PO No in Days

    Hi All.
    We have one scenario in that we need to transfer time from CATS to SERVICE entry sheet against PO No for conforming service receipt.
    We need to transfer time in days which i am able to enter in Time sheet data entry by selecting days as a units of measure but it gets convert to Hours in Approval table.
    We want to Hi All.
    We have one scenario in that we need to transfer time from CATS to SERVICE entry sheet against PO No for conforming service receipt.
    We need to transfer time in days which i am able to enter in Time sheet data entry by selecting days as a units of measure but it gets convert to Hours in Approval table.
    We want to transfer time in Days to service entry for conforming service receipt.
    Pl. help us how to transfer time in days to target component.
    regards,
    karan hon.for conforming service receipt.
    Pl. help us how to transfer time in days to target component.
    regards,
    karan hon.

    Hi,
    I think maintaining suitable Data Entry Profile will solve your problem. Take help from HR consultant.
    SPRO->Cross Application Component->Timesheet->Specific Settings for CATS Classic->Setup Data Entry Profiles.
    Regards

  • Create service entry sheet against service PR

    HI expert
    Can we create service entry sheet against service PR?
    If yes, can you show me the step in system?Thanks!
    Regards
    Mark

    No you can not create Service entry sheet against service PR. The purpose of creating pr is just requestion for  purchase of services or material. This is required for internal purpose even in pr ur not maintaining Vendor details, conditions. If you see standard business process with ref. to pr we creating po than service entry sheet. So in standard business process every documents have own purpose / value.

  • Payment Status against Service Entry Sheet

    Dear Experts,
    I need to know all Service Entry Sheet number against that payment still not made. I checked with table ESSR but it gives information related to acceptance and deletion status of Service Entry Sheet. Please tell me the tables from that I could get required result.
    Please guide me regarding this.
    Thanks in Advance.

    Hi Rajdeep,
    Try tables VFKK and VFKP.
    Regards
    Hareesh Menon

  • Can we make service entry sheet against contract

    Can we make service entry sheet against contract without releasing service order.

    Hi
    As of my knowledge service entry sheet is possible for contract release order. Not possible for contracts.
    Regards,
    Raman

  • Entrysheet quantity ,entry sheet price for a given outline agreement number

    Hello all,
    in which table entry sheet quantity and entry sheet price are stored, how do i use them in my report for a given outline agreement number...
    thanq...

    Hi,
    Pass EBELN to table ESSR and get the PACKNO.
    Pass PACKNO to table ESLL and get the quantity and price.
    Arivazhagan S

  • 2 IV against 1 Service entry

    Hi MM Experts
    i have created 1 service entry for  5000 rs now i want to created 2 IV for respectively 4000 and 1000. i have tried with MRHR for 4000 but while trying for 1000 system not allowing.
    pls tell me is it possible or not.
    Regards
    Anubhav

    HI,
    Make quantity in fraction and use for 4000 with 1st invoice..
    then add sceond row with remaining fraction with 2nd invoice..
    I think you should go for fraction entry in this case..
    it will be helpful..

  • MM Contract with Service Entry Sheet

    1. I have created WK contract (ME31K), for service (AcctAssgntCategory=K Cost Center, Item Categ=D Service) (100 AU/10 u20AC)
    2. Then, I have created purchase order (ME21N) with reference to my contract (100AU/10u20AC)
    3. ME81N, Service Entry Sheet and FINAL acceptance for 80AU/10u20AC.
    4. MIRO, Post the invoice for 80AU
    5. ME22N, Set tik for Final Invoice
    6. ME32K Consumption on item level or header level it shows (Wrongly!) that I have counsumed all 100AU
    7. I can not make new purchase order for the rest of unused contract (20AU), becouse system assumes all contract has been used.
    I have looked for SAP notes, and nothing. Is there some workarond with using tollerance.
    Thank you in advance
    Best regards

    Hi,
    create a contra in me31k with Agreement type MK here u can mention the default data for items item category, Account Assignment category and plant in this short text , target qty , net price & naterial group press enter.
    again u will find service specifications and enter the inputs short text , target qty , uom, Gross price & Material group, G.LA/c and costcenter press enter and save.
    create a po in me21n first u can give the inputs vendor, c.code,p.org,pur.group, in item detail give the outline aggrement after press enter, here also u can give the inputs like short text , target qty , uom, Gross price &, G.LA/c and costcenter press enter and save.
    create service entry sheet in ml81n, here u can take 80 qty outof 100.
    goto me22n in sub line items u can change for 80 qty & save
    with remaining 20 qty u can create another po with same inputs.
    Regards
    Raj.

Maybe you are looking for

  • Home button on ipod touch not working!!! how can i fix it? no warranty!!!!

    my ipod touch home button is not working everything on the ipod works fine but the home button. i have to turn off the ipod and then turn it back on as a substitute fix. has anyone else had this problem? if you have any ideas or know how to fix it pl

  • Photoshop CS3 tries to open tif and jpgs as RAW?

    While the problem looks like a PS3 issue, I believe it is somehow related to LR, so I will ask here. When I try to open some of my saved TIF and JPG files back into Photoshop CS3, it often brings the files into the Adobe Camera Raw converter instead

  • REG:How to move the data from one screen to another

    Hi Gurus, My requirement is ..... in the view1 we have the communication data     with fileds pernr voice extension, and     the display button ... when the display button is pressed we have to get the fields   pernr ,voice extension,mail, fields on

  • Firewall Connections to vPC Domain

    Hi all, What is the best way to connect a Firewall cluster (Checkpoint FW cluster) to a vPC Domain ? Current Topology is like as below. We are gonna replace Cat6Ks with N7Ks. FW#1(Active)  ----- keepalive for amongt FWs -------- FW#2 (Standby)      I

  • Convert HTML special characters to String

    Hi, I'm looking for an easy way to convert HTML special characters (like "&#246") to String. Any Ideas how implement this? Thanks