Service entry sheet can't be changed to update the final entry indicator

Hi All,
Can any body suggest possible reason and a solution for the below?
I am having a situation in which for a service P.O for which partial service enty has been done and for that invoice has also been done.(In production)
Now when I am trying to close the P.O line item by going to service entry sheet by t.code ml81n there i am not able to get the change icon , and hence i am not able to revoke the acceptance of service entry and subsequently I couldn't be able to set the final entry for that.
I tried to do the simulate the same senario in development(testing client) server and it is working fine, could any one sugget the reason and solution how to close the service line item in the P.O .
Regards,
Sushanta

Hi,
That was useful but I checked some other service P.O and for them I am able to see the change icon.
the p.o in my earlier mail are old one of 2002, but they are having partial service entry and invoice against them,
Could any one please tell me under what circumstances I will not be able to see the change icon in the service entry sheet?
Is it if the service entry is done at an old date, i mean earlier date or any other reason.
please let me know soon
Thanks
Sushanta

Similar Messages

  • Service entry sheet release flag is not appearing in the change mode.

    Hi,
    In Service entry sheet release flag is not appearing in the change mode(ML81N). though release strategy is  exsists in the header level.
    note:
    1.No changes done release setting, classes, or any other parameter.
    2.Last day Few service entry sheets have been  released by user .
    3.And also i tried with different user , whereas he is geeting release flag, but concern user is not getting?
    wht could be reasons?
    Please provide suitable solution.
    regards,
    kumar.

    Issue here is user is having authorization issue. Please run ML81N and execute /NSU53 report.
    Also execute ML81n and then /NSU53 report for the other user whos does not have this problem. Then send both the reports to Security team asking them to add the missing object in the user's role who has the problem.
    Hope this helps.
    Ganesh

  • Can someone plz confirm me that how i can change or update the security questions related to my apple id? as i have been never put them since i create my apple id but now due to some security reasons its asking me again and again the answers. i am unable

    can someone plz confirm me that how i can change or update the security questions related to my apple id? as i have been never put them since i create my apple id but now due to some security reasons its asking me again and again the answers. i am unable to go through the process. thanks.

    Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities

  • Can anyone explain how to post the manual entries in BCS?

    Hi All,
    Can anyone explain how to post the manual entries in BCS?

    Dear,
    Depands on posting level.
    There is Manual Posting  under Consolidation Functions.
    Please creat document and task.
    Next you add this task for consolidation monitor. There is "Consolidation Monitor " and you choose Hierarchy task and add your task for manul data.
    In document you kind in mind: choose manula posting !!!!!!!!!!!!!!!!!!!!!  in page tab Propertis under Posting!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.
    If you would like to entry in posting level 01 or 10, please choose Local currency and trasaction currency +- group currency.
    If you would like to entry in posting level 20 or 30, please choose Group currency.
    In SEM_BCS are posting level is very important. 
    Regards,
    anka

  • Is there any way to change the color of the Firefox 4 menu button away from orange? It attracts my attention and as far as I can tell personas change everything but the menu button color.

    Is there any way to change the color of the Firefox 4 menu button away from orange? It attracts my attention and as far as I can tell personas change everything but the menu button color.

    You can change it with the App Button Color extension - https://addons.mozilla.org/firefox/addon/app-button-color

  • The songs on the iPod on Itunes are grey and can not be changed while in the library are ok, what happen?

    the songs on the iPod on Itunes are grey and can not be changed while in the library are ok, what happen?

    Connect the device to your computer.
    Open iTunes.
    Select iPhone, iPad, or iPod in the Devices list.
    Click the Summary tab and select "Manually manage music and videos".
    Click Apply.
    Even when you have enabled manual management, you can still sync some content automatically. Select any content tab, such as Video, to enable automatic syncing for that type of content.

  • Hello everybody, I need to update my ITunes on my MAC (laptop) to the newer version so I can then be able to update the latest updates for my Iphone-3G'S. I don't require a complete reinstall just need to be able to update it.What I have tried so far is I

    Hello everybody, Im trying to update my ITunes on my MAC (laptop) to the newer version so I can then be able to update the latest updates for my Iphone-3G. I don’t require a complete reinstall just need to be able to update my itunes.
    What I have tried so far is I had my MAC search for update’s and it said that I should update to (ITunes version  10 . 6 . 3 ) So I asked it to do the update but after 2hrs of waiting for it to download/update it then puts up a message saying the following- (In order to continue installation, please close the following application: ITunes).
    When I tried to do this another message comes up that says- (The update ITunes can’t be installed. The following install step failed: run preupgrade script for Apple mobile device support. Contact the software manufacturer for assistance.)
    I have also tried to run the update while having closed ITunes before I even start the update but the same problem happens after waiting about 2hrs.
    Some one that had the same problem said this might be happening in the older operating systems. But that does not make sense because surely Apple want customers who own a MAC and i-phone to still buy from iTunes.
    My MAC is about 4-5years old. I have a i-phone.3G, 
    Can anybody help me please and Thank you?

    Download iTunes using the tab at the top of this page. Then run the update with iTunes closed.

  • After installing the current version of iTunes, I get an AppleSyncNotifier.exe - Entry Point Not Found error. It says "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll."

    After installing the current version of iTunes, I get an AppleSyncNotifier.exe - Entry Point Not Found error. It says "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Kindly advice a process to get rid of this error, without losing my files on the iTunes.

    Hi, I get the same error EVERY time iTunes updates.
    I have to do the fix that is suggested in this topic (cut and paste the sqlite3.dll)
    My Question:
    Since this happens every time iTunes updates...... Do I have to remove SQlite3.dll from the "apple application support" folder....... so that the sqlite3.dll is only located in the "mobile device support" folder?????
    It is getting really annoying to have to do the "cut and paste" fix every time iTunes updates.
    Thank You,
    Steve

  • HT4623 i still cant update my latest version of ios for my i pod touch 1st generation, please assist. can i still proceed to update the latest version?

    i still cant update my latest version of ios for my i pod touch 1st generation, please assist. can i still proceed to update the latest version?
    Thank you.
    Regads
    Jason Loh
    have a nice day

    Hi
    The blunt awnser is you can't - sorry
    But you can- unadviseably as it is illegal - but there is still websites that do it but if you want to get the further iOS' then you will have to purchase a new ipod :)
    Hope I've helped
    Matt

  • Service Entry Sheet Screen Enhancement (SRVEUSCR) - Changing tabstrip title

    Hello All,
    I m working on Service Entry Sheet Screen Enhancement (SRVEUSCR). I want to know how can I change the tabstrip page title without modification that is designated for user sub-screen. Its currently showing as "Addnl Data" and it is hard coded in the main screen by SAP.
    Regards
    Nadeem

    Hi,
    In PAI declare ur fields.....
    PROCESS AFTER INPUT.
    *   This chain has to include all input-fields:
      CHAIN.
        FIELD P4001-PRV_CTC.
        field P4001-PRV_DSG.
    ENDCHAIN.
    In program...
    loop at SCREEN.
    IF SCREEN-NAME = 'P4001-PRV_CTC'.
    SCREEN-INPUT = '1'.
    MODIFY SCREEN.
    ENDIF.
    IF SCREEN-NAME = 'P4001-PRV_DSG'.
    SCREEN-INPUT = '1'.
    MODIFY SCREEN.
    ENDIF.
    endloop.
    Reward points if useful....
    Regards
    AK

  • Service for listener can start after change ip of machine

    Hi,
    I have installed Oracle 10g, which installation was done from the other person which is not part of the team, my experience with Oracle is little.
    We executing our automation tests on Vshere machine and our sysadmin had to change to a new hardware and after this move to change IP of the machine.
    On a machine it has installed microsoft loopback adaptor, also in host files are added iP 10.10.10.10 host of the machine with domain and only host name.
    in tnsnames.ora are used host names no IP addresses. After change of IP i loads first page and when i have tried to login in Enterprize manager can't open next page.
    I checked windows services and i found that oracle listener was stopped when i have tried to started it shows this error: "The nameof listner service on Local computer started and stopped. Some services stop automaticly if they are not use by other services or programs", Oracle Fulfillment Server failed with the same error when i have tried to start this service. Also OracleConcMgr raise error whrn i have tried to run service with this error 1067: The process terminated unexpetedly
    I ewxecuted command lsnrctl status
    LSNRCTL for 32-bit Windows: Version 10.1.0.5.0 - Production on 25-JUN-2012 14:53
    :45
    Copyright (c) 1991, 2004, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 10.1.0.5.0 - Produ
    ction
    Start Date 25-JUN-2012 14:01:09
    Uptime 0 days 0 hr. 52 min. 38 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File C:\oracle\PROD\inst\apps\PROD_\ora\10.1.
    2\network\admin\listener.ora
    Listener Log File C:\oracle\PROD\apps\tech_st\10.1.2\network\log\listene
    r.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hostname)(PORT=
    1521)))
    The listener supports no services
    The command completed successfully
    Thanks in advance if you can help me. if you need more info write me

    Solution:
    I secured Enterprise Mangager (HTTPS, emctl secure...).
    First, I must unsecure EM-Console, run "chgiphost.sh -mid" and then re-secure EM-Console.
    Look at: Metalink - Note 280034.1 How to Secure and Unsecure the AS Control 10g Console
    regards
    Harald.

  • Can we capture changes made to the objects other than tables using streams

    Hello All,
    I have setup a schema level streams replication using local capture process. I can capture all the DML changes on tables but have some issues capturing DDL. Even though streams are used for sharing data at different or within a database I was wondering if we can replicate the changes made to the objects like views, procedures, functions and triggers at the source database. I am not able to replicate the changes made to the views in my setup.
    Also, when I do a "select source_database,source_object_type,instantiation_scn from dba_apply_instantiated_objects" under the column 'object_type' I just see the TABLE in all the rows selected.
    Thanks,
    Sunny boy

    Hello
    This could be a problem with your rules configured with capture,propagation or apply. Or might be a problem with your instantiation.
    You can replicate Functions, Views, Procedure, Triggers etc using Streams Schema level replication or by configuring the rules.
    Please note that the objects like Functions, Views, Procedure, Triggers etc will not appear in the DBA_APPLY_INSTANTIATED_OBJECTS view. The reason is because you do a schema level instantiation only the INSTANTIATION_SCN in DBA_APPLY_INSTANTIATED_SCHEMAS is accounted for these objects. At the same time tables would get recursively instantiated and you would see an entry in DBA_APPLY_INSTANTIATED_OBJECTS.
    It works fine for me. Please see the below from my database (database is 10.2.0.3):
    on capture site_
    SQL> connect strmadmin/strmadmin
    Connected.
    SQL> select capture_name,rule_set_name,status from dba_capture;
    CAPTURE_NAME RULE_SET_NAME STATUS
    STREAMS_CAPTURE RULESET$_33 ENABLED
    SQL> select rule_name from dba_rule_set_rules where rule_set_name='RULESET$_33';
    RULE_NAME
    TEST41
    TEST40
    SQL> set long 100000
    SQL> select rule_condition from dba_rules where rule_name='TEST41';
    RULE_CONDITION
    ((:ddl.get_object_owner() = 'TEST' or :ddl.get_base_table_owner() = 'TEST') and
    :ddl.is_null_tag() = 'Y' and :ddl.get_source_database_name() = 'SOURCE.WORLD')
    SQL> select rule_condition from dba_rules where rule_name='TEST40';
    RULE_CONDITION
    ((:dml.get_object_owner() = 'TEST') and :dml.is_null_tag() = 'Y' and :dml.get_so
    urce_database_name() = 'SOURCE.WORLD')
    SQL> select * from global_name;
    GLOBAL_NAME
    SOURCE.WORLD
    SQL> conn test/test
    Connected.
    SQL> select object_name,object_type,status from user_objects;
    OBJECT_NAME OBJECT_TYPE STATUS
    TEST_NEW_TABLE TABLE VALID
    TEST_VIEW VIEW VALID
    PRC1 PROCEDURE VALID
    TRG1 TRIGGER VALID
    FUN1 FUNCTION VALID
    5 rows selected.
    on apply site_
    SQL> connect strmadmin/strmadmin
    Connected.
    SQL> col SOURCE_DATABASE for a22
    SQL> select source_database,source_object_owner,source_object_name,source_object_type,instantiation_scn
    2 from dba_apply_instantiated_objects;
    SOURCE_DATABASE SOURCE_OBJ SOURCE_OBJECT_NAME SOURCE_OBJE INSTANTIATION_SCN
    SOURCE.WORLD TEST TEST_NEW_TABLE TABLE 9886497863438
    SQL> select SOURCE_DATABASE,SOURCE_SCHEMA,INSTANTIATION_SCN from
    2 dba_apply_instantiated_schemas;
    SOURCE_DATABASE SOURCE_SCHEMA INSTANTIATION_SCN
    SOURCE.WORLD TEST 9886497863438
    SQL> select * from global_name;
    GLOBAL_NAME
    TARGET.WORLD
    SQL> conn test/test
    Connected.
    SQL> select object_name,object_type,status from user_objects;
    OBJECT_NAME OBJECT_TYPE STATUS
    TEST_VIEW VIEW VALID
    PRC1 PROCEDURE VALID
    TRG1 TRIGGER VALID
    FUN1 FUNCTION VALID
    TEST_NEW_TABLE TABLE VALID
    5 rows selected.
    These Functions, Views, Procedure, Trigger are created on the source and got replicated automatically to the target site TARGET.WORLD. And note that none of these objects are appearing in DBA_APPLY_INSTANTIATED_OBJECTS view.
    I have used the above given rules for capture. For propagation I dont have a ruleset itself and for apply I have same rules as of the capture rules.
    Please verify your environment and let me know if you need further help.
    Thanks,
    Rijesh

  • Can profit center report drilldowen to the document entry level

    Hi,
    In Profit center Reporting can we drill down to the document entry level if yes how we can prepare this kind of reports.
    Thanking you.
    Regards
    Santosh Rothe

    Hi Santosh,
    Yes,
    Click 2 times on the line (amount) or use the menu path Report / Other report
    In the most standard reports you can drill down.
    When not you can ad reports, line item overvieuw to the Report group
    Transaction GR52 go to the header and under Report interface you can ad other reports or line item transaction codes
    Paul

  • Why are my browser pages white. and why can't I change back to the theme I had before ?

    I can't get my yahoo page or any other to change back to the theme I had for a background and it seems that all my web sites have a white theme and it will not change back. any page or web site that I go to is white, strange. Anyone know what is going on.

    It could be the work of one of your add-ons, or even add / mal-ware.
    Look thru your add-ons list and make sure you know what each one is
    and what it does. Also, check the programs that are on your computer
    '''Windows:''' Start > Control Panel > Uninstall Programs.
    '''Mac:''' Open the "Applications" folder.
    '''Linux:''' Check your user manual.
    Go thru the list. If you find something that you don't
    know what it is, use a web search.
    '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-caused-malware Troubleshoot Firefox Issues Caused By Malware]''' {web link}

  • How can I make a second copy so I can make some changes, but lose the original document?

    How can I make a copy of my new pdf convert to word document without losing the original document?

    Hi mariponce,
    Is it the Word document that you want to make a copy of, or the PDF? In either case, you can choose File > Save As (in the appropriate application), and give the file a new name. For example, if you have a file named "HappyTimes.docx," you could choose File > Save As, and name the file "HappyTimes2.docx." Then, you'll have two Word files, and you can edit one and leave the other intact.
    Best,
    Sara

Maybe you are looking for