Service entry sheet creation thru bapi for multiple line items

HI All,
WE are using BAPI_ENTRYSHEET_CREATE bapi for the creation of service entry sheet against service PO.
We are able to create the service entry sheet successfully with single sevice line item using this bapi,but when we are going for multiple service line items in item services tab in aPO, we are able to create the service entry sheet with only one service line item although there are 4 service line items in the item service tab in the po.
We know that this bapi cannot support more than one po line item as it has provision for only one line item at the header leavel in the bapi
will be rewarded for the best solution.
Regards,
velu

Hi,
Do you know the note 420334?. There you have very useful information.
Best Regards,
Arminda Jack

Similar Messages

  • Service entry sheet creation from PO without selecting line item of PO?

    Dear SAPIENTS,
    While creating service entry sheet for one frame work order (PO) i do not want to select line item of PO. I want all the service of PO line item should come automatically in single service entry sheet number.
    At present whenm i enter the PO number its taking line item 10 as default because of this service of that line item is coming and for every line item i have to create different service entry sheet.
    Regards,
    Kaushal Rai

    Hi,
    in ML81N please enter the entry sheet header data, then go to full screen services, push the button for
    "service selection" and after that  a popup appeares for the service selection (SAPLMLSP
    0500). On the bottom of this popup you have the button "complete" = adopt all = F9. If you hit this
    button all of your services within the service specification will be copied into the entry sheet
    at the same time.
    Regards,
    Edit

  • Supress Mandatory field for Service Entry Sheet Creation

    Hi,
    I am using BDC for Service Entry Sheet creation as BAPI cannot fulfill the Business needs.
    During Recording when I click on Service Overview and click on Service Selection we provide the Model Service Specification Number there I can see the Services and select it, but when I select the service and adopt, an error message ocuured to enter the quantity.
    Is there any way to supress the standard error message without using acess Key.
    BR
    Aviram

    Hi Aviram,
    Messages type 'E' , 'I' or 'W' are controlled through configurations. Please check with your functional consultant with the message number you want to supress. It can be made as 'I' or 'W' through configuration.
    Similarly if you do not want that particular field as mandatory field ask functional consultant to make it optional.
    Regards
    Sachin
    Edited by: sachin G patil on Mar 9, 2011 3:13 PM
    Edited by: sachin G patil on Mar 9, 2011 3:20 PM

  • To make service entry sheet for multiple line items of the service PO.

    Hello MM Gurus,
    Please help me for the following
    I create a service PO with say 10 line items. Then while doing the service entry sheet the system automatically picks the line item 10 by default. When I try to enter the other items it throws an error" unplanned services cannot be entered"
    So how to make a service entry sheet which shall include all the line items of the service PO at the same time.
    So if I have 100 items in the PO do we make the service entry sheet 100 times against each item? Is there any seeting/solution on this?
    Please help.
    Regards,
    Prasanna.

    Dear,
    I have two solution for u.
    1) Create different service entry sheet -ML81N for each line item and create single invoice verification for all service entry sheet - MIRO
    2) Create service purchase order - ME21N for only one line item.
    And include all services in service tab available at item detail level of service purchase order. Enter it's quantity and rate.
    Than create one service entry sheet for purchase order.
    So you can create one service entry sheet for all line item of services.
    Note: - Use option 2 for easy process.
    Regards,
    Mahesh Wagh.

  • How Can I Create One Entry Sheet For Multiple Line Items of A PO

    Please Tell Me How Can I Create One Entry Sheet For Multiple Line Items of A PO

    hi,
    It is not possible to create single Service Entry sheet for multiple PO line items. It is 1 to 1 relation.
    you have to make different service entry sheets for different item of service master.
    regards
    Manish Joshi

  • Error ' Quantity exceeds quantity in PO' in service entry sheet creation.

    Hi,
    I am getting error "Quantity entered 7,000 exceeds quantity 5,000 in purchase order' ,  Message no. SE363" while creating service entry sheet
    PO Quantity - 1 AU
    Service  quantity - 5 HR
    in service entry sheet creation i am giving 6HR instead of what is planned in PO
    Not sure what driving this error, please help
    Thanks

    Hi
    Could you please check if Message SE 363 is set as an E (Error) in the IMG transaction OME0?. If it is set to an error you will not be  able to accept service overdeliveries even if you have the unlimited indicator set.                                                                               
    Regards,
    Mauro

  • BDC to create SO(VA01) for multiple line items

    Hi all,
    My requirement is to create SO for multiple line items in ECC6.0
    My recording for VA01 is like this.
    start-of-selection.
    perform open_group.
    perform bdc_dynpro      using 'SAPMV45A' '0101'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAK-AUART'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'VBAK-AUART'
                                  'ZOR'.
    perform bdc_field       using 'VBAK-VKORG'
                                  '2000'.
    perform bdc_field       using 'VBAK-VTWEG'
                                  '10'.
    perform bdc_field       using 'VBAK-SPART'
                                  '05'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-WERKS(01)'.
    perform bdc_field       using 'RV45A-MABNR(01)'
                                  'hrpocf'.
    perform bdc_field       using 'VBAP-POSNR(01)'
                                  '    10'.
    perform bdc_field       using 'RV45A-KWMENG(01)'
                                  '                 55'.
    perform bdc_field       using 'VBAP-WERKS(01)'
                                  '2010'.
    perform bdc_dynpro      using 'SAPLCEI0' '0109'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RCTMS-MWERT(06)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BACK'.
    perform bdc_field       using 'RCTMS-MNAME(01)'
                                  'A_THICK_MM'.
    perform bdc_field       using 'RCTMS-MNAME(02)'
                                  'A_WIDTH_MM'.
    perform bdc_field       using 'RCTMS-MNAME(03)'
                                  'A_EQUIVALENT_SPEC'.
    perform bdc_field       using 'RCTMS-MNAME(04)'
                                  'A_BATCH_WEIGHT_MAX_SI'.
    perform bdc_field       using 'RCTMS-MNAME(05)'
                                  'A_BATCH_WEIGHT_MIN_SI'.
    perform bdc_field       using 'RCTMS-MNAME(06)'
                                  'A_COIL_INNER_DIA_MM'.
    perform bdc_field       using 'RCTMS-MWERT(01)'
                                  '3.2'.
    perform bdc_field       using 'RCTMS-MWERT(02)'
                                  '1200'.
    perform bdc_field       using 'RCTMS-MWERT(03)'
                                  'IS_11513_GR_D_1985'.
    perform bdc_field       using 'RCTMS-MWERT(04)'
                                  '26.4'.
    perform bdc_field       using 'RCTMS-MWERT(05)'
                                  '26.4'.
    perform bdc_field       using 'RCTMS-MWERT(06)'
                                  '610'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai east'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-WERKS(02)'.
    perform bdc_field       using 'RV45A-MABNR(02)'
                                  'hrpocf'.
    perform bdc_field       using 'VBAP-POSNR(02)'
                                  '    11'.
    perform bdc_field       using 'RV45A-KWMENG(02)'
                                  '                 66'.
    perform bdc_field       using 'VBAP-WERKS(02)'
                                  '2010'.
    perform bdc_dynpro      using 'SAPLCEI0' '0109'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RCTMS-MWERT(06)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BACK'.
    perform bdc_field       using 'RCTMS-MNAME(01)'
                                  'A_THICK_MM'.
    perform bdc_field       using 'RCTMS-MNAME(02)'
                                  'A_WIDTH_MM'.
    perform bdc_field       using 'RCTMS-MNAME(03)'
                                  'A_EQUIVALENT_SPEC'.
    perform bdc_field       using 'RCTMS-MNAME(04)'
                                  'A_BATCH_WEIGHT_MAX_SI'.
    perform bdc_field       using 'RCTMS-MNAME(05)'
                                  'A_BATCH_WEIGHT_MIN_SI'.
    perform bdc_field       using 'RCTMS-MNAME(06)'
                                  'A_COIL_INNER_DIA_MM'.
    perform bdc_field       using 'RCTMS-MWERT(01)'
                                  '3.1'.
    perform bdc_field       using 'RCTMS-MWERT(02)'
                                  '1250'.
    perform bdc_field       using 'RCTMS-MWERT(03)'
                                  'IS_11513_GR_D_1985'.
    perform bdc_field       using 'RCTMS-MWERT(04)'
                                  '20.084'.
    perform bdc_field       using 'RCTMS-MWERT(05)'
                                  '20.084'.
    perform bdc_field       using 'RCTMS-MWERT(06)'
                                  '610'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=PDE3'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai east'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-POSNR(01)'.
    perform bdc_field       using 'RV45A-VBAP_SELKZ(01)'
                                  'X'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\09'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-INCO2'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'VBKD-FKDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-TAXM1'
                                  '1'.
    perform bdc_field       using 'VBAP-TAXM2'
                                  '1'.
    perform bdc_field       using 'VBAP-TAXM3'
                                  '0'.
    perform bdc_field       using 'VBAP-TAXM4'
                                  '0'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DELETE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_CREATE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DETAIL'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXVB'.
    perform bdc_field       using 'RSTXT-TXLINE(02)'
                                  'FDGFDG'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXBA'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\10'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/EBACK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-POSEX_E'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-POSEX'
                                  '108128'.
    perform bdc_field       using 'VBKD-BSTKD_E'
                                  '3011192'.
    perform bdc_field       using 'VBKD-POSEX_E'
                                  '000005'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=PDE3'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai east'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-POSNR(02)'.
    perform bdc_field       using 'RV45A-VBAP_SELKZ(02)'
                                  'X'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\09'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-INCO2'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'VBKD-FKDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-TAXM1'
                                  '1'.
    perform bdc_field       using 'VBAP-TAXM2'
                                  '1'.
    perform bdc_field       using 'VBAP-TAXM3'
                                  '0'.
    perform bdc_field       using 'VBAP-TAXM4'
                                  '0'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DELETE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_CREATE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DETAIL'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXVB'.
    perform bdc_field       using 'RSTXT-TXLINE(02)'
                                  'GFGFDG'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXBA'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\10'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-POSEX_E'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-POSEX'
                                  '108128'.
    perform bdc_field       using 'VBKD-BSTKD_E'
                                  '3011192'.
    perform bdc_field       using 'VBKD-POSEX_E'
                                  '000005'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/EBACK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-POSEX'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-POSEX'
                                  '108128'.
    perform bdc_field       using 'VBKD-BSTKD_E'
                                  '3011192'.
    perform bdc_field       using 'VBKD-POSEX_E'
                                  '5'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=KKAU'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai east'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RV45A-MABNR(01)'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\02'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-KONDA'.
    perform bdc_field       using 'VBAK-AUDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAK-VKBUR'
                                  'IN15'.
    perform bdc_field       using 'VBAK-WAERK'
                                  'INR'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-KDGRP'
                                  'CF'.
    perform bdc_field       using 'VBKD-PLTYP'
                                  '01'.
    perform bdc_field       using 'VBKD-KONDA'
                                  '01'.
    perform bdc_field       using 'VBKD-BZIRK'
                                  'NORTH'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\03'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-VSART'.
    perform bdc_field       using 'VBAK-VSBED'
                                  '01'.
    perform bdc_field       using 'VBKD-KZAZU'
                                  'X'.
    perform bdc_field       using 'VBKD-VSART'
                                  'ER'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\05'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-INCO2'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'VBKD-FKDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAK-TAXK1'
                                  '1'.
    perform bdc_field       using 'VBAK-TAXK3'
                                  'l'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\09'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-ZLSCH'.
    perform bdc_field       using 'VBKD-KTGRD'
                                  '01'.
    perform bdc_field       using 'VBKD-ZLSCH'
                                  'c'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DELETE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_CREATE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DETAIL'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXVB'.
    perform bdc_field       using 'RSTXT-TXLINE(02)'
                                  'BDFBFDB'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXBA'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\11'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=KSTC'.
    perform bdc_dynpro      using 'SAPLBSVA' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'J_STMAINT-ANWS(02)'.
    perform bdc_field       using 'J_STMAINT-ANWS(01)'
    perform bdc_field       using 'J_STMAINT-ANWS(02)'
                                  'X'.
    perform bdc_dynpro      using 'SAPLBSVA' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'J_STMAINT-ANWS(03)'.
    perform bdc_field       using 'J_STMAINT-ANWS(02)'
    perform bdc_field       using 'J_STMAINT-ANWS(03)'
                                  'X'.
    perform bdc_dynpro      using 'SAPLBSVA' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'J_STMAINT-ANWS(04)'.
    perform bdc_field       using 'J_STMAINT-ANWS(03)'
    perform bdc_field       using 'J_STMAINT-ANWS(04)'
                                  'X'.
    perform bdc_dynpro      using 'SAPLBSVA' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BACK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'JOSTD-OBJNR'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/EBACK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RV45A-TXT_VBELN'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=SICH'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RV45A-MABNR(01)'.
    perform bdc_transaction using 'VA01'.
    perform close_group.
    if in excel file one row of records means i am succesfully creating SO.
    But for multiple i am not getting idea to create SO.
    My excel file details like this.In this excel file based on VBKD-BSTKD_E value i have to keep the records in line items.
    VBAK-AUART    :Order Type
    VBAK-VKORG    : Sales Org
    VBAK-VTWEG    : Distri Channel
    VBAK-SPART    : Division
    VBAK-KUNNR    : Sold-to-Party
    VBPA-KUNNAR   : Ship-to-Party
    VBAK-BSTNK    : PO No
    VBAK-BSTDK    : PO Date
    VBAP-MATNR    : Material No
    A_THICK_MM
    A_WIDTH_MM
    A_EQUIVALENT_SPEC
    A_COIL_INNER_DIA_MM
    A_BATCH_WEIGHT_MIN_SI
    A_BATCH_WEIGHT_MAX_SI
    VBAP-KWMENG    : Qty
    VBAP-WERKS     : Delivery Plant
    VBKD-INCO2     : Incoterm2
    VBKD-KONDA     : Price Group
    VBKD-VSART     : Shipping Type
    VBAK-TAXK1     : Cust Tax-1
    VBAK-TAXK2     : Cust Tax-2
    VBAK-TAXK3     : Cust Tax-3
    VBAK-TAXK4     : Cust Tax-4
    VBKD-ZLSCH     : Payment Method
    VBAP-TAXM1     : Mat tax clss-1
    VBAP-TAXM2     : Mat tax clss-2
    VBAP-TAXM3     : Mat tax clss-3
    VBAP-TAXM4     : Mat tax clss-4
    VBAP-POSEX     : IMPS Order No
    VBKD-BSTKD_E   : old SO in 4.6c
    VBKD-POSEX_E   : old SO Item  in 4.6c
    Text Id        : TDC No
    Text Id-ES10   : Special Inst(Unld const & Veh)
    ZOR,2000,10,5,100000,100000,PO NO 125,19.01.2008,HRPOCF,3.1,1200,IS_11513_GR_D_1985,610,20.084,20.084
    51,2010,Mumbai,01Freight-pre paid,ER,2,0,L,0,c,1,1,0,0,108128,3011192,     1,PO 444 AMD 1,Spl Inst
    based on VBKD-BSTKD_E line items has to create.
    if VBKD-BSTKD_E = 3011192 is like 4 records in excel means for these 4 should be one SO
    if it is changed to 3011193 then only different SO.
    PLs If any one knows solution pls write some sample code for me.
    If u send that code to my mail id also  very thankful.
    [email protected]
    Pls help me this is urgent requirement.
    Thanks & Regards,
    J.Lokesh

    HI,
    Instead of using BDC , why dont you make use of BAPI.
    As you are on ECC, you can make use of BAPI BAPI_SALESORDER_CREATEFROMDAT2
    Collect all your records based on PO # and pass them into line item table structure ORDER_ITEMS_IN.
    *--Logic something like this.
      loop at it_exceldata into l_line.
      loop at it_exceldata into l_so where bstkd_e eq l_line-bstkd.
      *This will loop at all the same  PO#
      *collect the data related into corr tables. and append
      endloop.
      *Now you are outside the loop.
      *Call the BAPI to update this SO
      delete it_exceldata where bstkd_e eq l_line-bstkd_e.
      endloop.
    Also pass all the necessary data to header structure ORDER_HEADER_IN
    Do not check for Sy-subrc at the end of execution.
    Instead read the Return table with message type 'A' or 'E whichi means there is an error/abort in BAPI execution.
    Remember to expicitly COMMIT_WORK after succesfull execution of BAPI using BAPI_TRANSACTION_COMMIT
    Please let me know , if you need more help in this
    Gary.

  • Pls help me to create SO using BDC for multiple line items (VA01)

    Hi all,
    My requirement is to create SO for multiple line items in ECC6.0
    My recording for VA01 is like this.
    start-of-selection.
    perform open_group.
    perform bdc_dynpro      using 'SAPMV45A' '0101'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAK-AUART'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'VBAK-AUART'
                                  'ZOR'.
    perform bdc_field       using 'VBAK-VKORG'
                                  '2000'.
    perform bdc_field       using 'VBAK-VTWEG'
                                  '10'.
    perform bdc_field       using 'VBAK-SPART'
                                  '05'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-WERKS(01)'.
    perform bdc_field       using 'RV45A-MABNR(01)'
                                  'hrpocf'.
    perform bdc_field       using 'VBAP-POSNR(01)'
                                  '    10'.
    perform bdc_field       using 'RV45A-KWMENG(01)'
                                  '                 55'.
    perform bdc_field       using 'VBAP-WERKS(01)'
                                  '2010'.
    perform bdc_dynpro      using 'SAPLCEI0' '0109'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RCTMS-MWERT(06)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BACK'.
    perform bdc_field       using 'RCTMS-MNAME(01)'
                                  'A_THICK_MM'.
    perform bdc_field       using 'RCTMS-MNAME(02)'
                                  'A_WIDTH_MM'.
    perform bdc_field       using 'RCTMS-MNAME(03)'
                                  'A_EQUIVALENT_SPEC'.
    perform bdc_field       using 'RCTMS-MNAME(04)'
                                  'A_BATCH_WEIGHT_MAX_SI'.
    perform bdc_field       using 'RCTMS-MNAME(05)'
                                  'A_BATCH_WEIGHT_MIN_SI'.
    perform bdc_field       using 'RCTMS-MNAME(06)'
                                  'A_COIL_INNER_DIA_MM'.
    perform bdc_field       using 'RCTMS-MWERT(01)'
                                  '3.2'.
    perform bdc_field       using 'RCTMS-MWERT(02)'
                                  '1200'.
    perform bdc_field       using 'RCTMS-MWERT(03)'
                                  'IS_11513_GR_D_1985'.
    perform bdc_field       using 'RCTMS-MWERT(04)'
                                  '26.4'.
    perform bdc_field       using 'RCTMS-MWERT(05)'
                                  '26.4'.
    perform bdc_field       using 'RCTMS-MWERT(06)'
                                  '610'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai east'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-WERKS(02)'.
    perform bdc_field       using 'RV45A-MABNR(02)'
                                  'hrpocf'.
    perform bdc_field       using 'VBAP-POSNR(02)'
                                  '    11'.
    perform bdc_field       using 'RV45A-KWMENG(02)'
                                  '                 66'.
    perform bdc_field       using 'VBAP-WERKS(02)'
                                  '2010'.
    perform bdc_dynpro      using 'SAPLCEI0' '0109'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RCTMS-MWERT(06)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BACK'.
    perform bdc_field       using 'RCTMS-MNAME(01)'
                                  'A_THICK_MM'.
    perform bdc_field       using 'RCTMS-MNAME(02)'
                                  'A_WIDTH_MM'.
    perform bdc_field       using 'RCTMS-MNAME(03)'
                                  'A_EQUIVALENT_SPEC'.
    perform bdc_field       using 'RCTMS-MNAME(04)'
                                  'A_BATCH_WEIGHT_MAX_SI'.
    perform bdc_field       using 'RCTMS-MNAME(05)'
                                  'A_BATCH_WEIGHT_MIN_SI'.
    perform bdc_field       using 'RCTMS-MNAME(06)'
                                  'A_COIL_INNER_DIA_MM'.
    perform bdc_field       using 'RCTMS-MWERT(01)'
                                  '3.1'.
    perform bdc_field       using 'RCTMS-MWERT(02)'
                                  '1250'.
    perform bdc_field       using 'RCTMS-MWERT(03)'
                                  'IS_11513_GR_D_1985'.
    perform bdc_field       using 'RCTMS-MWERT(04)'
                                  '20.084'.
    perform bdc_field       using 'RCTMS-MWERT(05)'
                                  '20.084'.
    perform bdc_field       using 'RCTMS-MWERT(06)'
                                  '610'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=PDE3'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai east'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-POSNR(01)'.
    perform bdc_field       using 'RV45A-VBAP_SELKZ(01)'
                                  'X'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\09'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-INCO2'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'VBKD-FKDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-TAXM1'
                                  '1'.
    perform bdc_field       using 'VBAP-TAXM2'
                                  '1'.
    perform bdc_field       using 'VBAP-TAXM3'
                                  '0'.
    perform bdc_field       using 'VBAP-TAXM4'
                                  '0'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DELETE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_CREATE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DETAIL'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXVB'.
    perform bdc_field       using 'RSTXT-TXLINE(02)'
                                  'FDGFDG'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXBA'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\10'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/EBACK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-POSEX_E'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-POSEX'
                                  '108128'.
    perform bdc_field       using 'VBKD-BSTKD_E'
                                  '3011192'.
    perform bdc_field       using 'VBKD-POSEX_E'
                                  '000005'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=PDE3'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai east'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-POSNR(02)'.
    perform bdc_field       using 'RV45A-VBAP_SELKZ(02)'
                                  'X'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\09'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-INCO2'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'VBKD-FKDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-TAXM1'
                                  '1'.
    perform bdc_field       using 'VBAP-TAXM2'
                                  '1'.
    perform bdc_field       using 'VBAP-TAXM3'
                                  '0'.
    perform bdc_field       using 'VBAP-TAXM4'
                                  '0'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DELETE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_CREATE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DETAIL'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXVB'.
    perform bdc_field       using 'RSTXT-TXLINE(02)'
                                  'GFGFDG'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXBA'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\10'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-POSEX_E'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-POSEX'
                                  '108128'.
    perform bdc_field       using 'VBKD-BSTKD_E'
                                  '3011192'.
    perform bdc_field       using 'VBKD-POSEX_E'
                                  '000005'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/EBACK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-POSEX'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-POSEX'
                                  '108128'.
    perform bdc_field       using 'VBKD-BSTKD_E'
                                  '3011192'.
    perform bdc_field       using 'VBKD-POSEX_E'
                                  '5'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=KKAU'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai east'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RV45A-MABNR(01)'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\02'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-KONDA'.
    perform bdc_field       using 'VBAK-AUDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAK-VKBUR'
                                  'IN15'.
    perform bdc_field       using 'VBAK-WAERK'
                                  'INR'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-KDGRP'
                                  'CF'.
    perform bdc_field       using 'VBKD-PLTYP'
                                  '01'.
    perform bdc_field       using 'VBKD-KONDA'
                                  '01'.
    perform bdc_field       using 'VBKD-BZIRK'
                                  'NORTH'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\03'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-VSART'.
    perform bdc_field       using 'VBAK-VSBED'
                                  '01'.
    perform bdc_field       using 'VBKD-KZAZU'
                                  'X'.
    perform bdc_field       using 'VBKD-VSART'
                                  'ER'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\05'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-INCO2'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'VBKD-FKDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAK-TAXK1'
                                  '1'.
    perform bdc_field       using 'VBAK-TAXK3'
                                  'l'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\09'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-ZLSCH'.
    perform bdc_field       using 'VBKD-KTGRD'
                                  '01'.
    perform bdc_field       using 'VBKD-ZLSCH'
                                  'c'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DELETE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_CREATE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DETAIL'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXVB'.
    perform bdc_field       using 'RSTXT-TXLINE(02)'
                                  'BDFBFDB'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXBA'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\11'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=KSTC'.
    perform bdc_dynpro      using 'SAPLBSVA' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'J_STMAINT-ANWS(02)'.
    perform bdc_field       using 'J_STMAINT-ANWS(01)'
    perform bdc_field       using 'J_STMAINT-ANWS(02)'
                                  'X'.
    perform bdc_dynpro      using 'SAPLBSVA' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'J_STMAINT-ANWS(03)'.
    perform bdc_field       using 'J_STMAINT-ANWS(02)'
    perform bdc_field       using 'J_STMAINT-ANWS(03)'
                                  'X'.
    perform bdc_dynpro      using 'SAPLBSVA' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'J_STMAINT-ANWS(04)'.
    perform bdc_field       using 'J_STMAINT-ANWS(03)'
    perform bdc_field       using 'J_STMAINT-ANWS(04)'
                                  'X'.
    perform bdc_dynpro      using 'SAPLBSVA' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BACK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'JOSTD-OBJNR'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/EBACK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RV45A-TXT_VBELN'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=SICH'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RV45A-MABNR(01)'.
    perform bdc_transaction using 'VA01'.
    perform close_group.
    if in excel file one row of records means i am succesfully creating SO.
    But for multiple i am not getting idea to create SO.
    My excel file details like this.In this excel file based on VBKD-BSTKD_E value i have to keep the records in line items.
    VBAK-AUART    :Order Type
    VBAK-VKORG    : Sales Org
    VBAK-VTWEG    : Distri Channel
    VBAK-SPART    : Division
    VBAK-KUNNR    : Sold-to-Party
    VBPA-KUNNAR   : Ship-to-Party
    VBAK-BSTNK    : PO No
    VBAK-BSTDK    : PO Date
    VBAP-MATNR    : Material No
    A_THICK_MM
    A_WIDTH_MM
    A_EQUIVALENT_SPEC
    A_COIL_INNER_DIA_MM
    A_BATCH_WEIGHT_MIN_SI
    A_BATCH_WEIGHT_MAX_SI
    VBAP-KWMENG    : Qty
    VBAP-WERKS     : Delivery Plant
    VBKD-INCO2     : Incoterm2
    VBKD-KONDA     : Price Group
    VBKD-VSART     : Shipping Type
    VBAK-TAXK1     : Cust Tax-1
    VBAK-TAXK2     : Cust Tax-2
    VBAK-TAXK3     : Cust Tax-3
    VBAK-TAXK4     : Cust Tax-4
    VBKD-ZLSCH     : Payment Method
    VBAP-TAXM1     : Mat tax clss-1
    VBAP-TAXM2     : Mat tax clss-2
    VBAP-TAXM3     : Mat tax clss-3
    VBAP-TAXM4     : Mat tax clss-4
    VBAP-POSEX     : IMPS Order No
    VBKD-BSTKD_E   : old SO in 4.6c
    VBKD-POSEX_E   : old SO Item  in 4.6c
    Text Id        : TDC No
    Text Id-ES10   : Special Inst(Unld const & Veh)
    ZOR,2000,10,5,100000,100000,PO NO 125,19.01.2008,HRPOCF,3.1,1200,IS_11513_GR_D_1985,610,20.084,20.084
    51,2010,Mumbai,01Freight-pre paid,ER,2,0,L,0,c,1,1,0,0,108128,3011192,     1,PO 444 AMD 1,Spl Inst
    based on VBKD-BSTKD_E line items has to create.
    if VBKD-BSTKD_E = 3011192 is like 4 records in excel means for these 4 should be one SO
    if it is changed to 3011193 then only different SO.
    PLs If any one knows solution pls write some sample code for me.
    If u send that code to my mail id also  very thankful.
    Pls help me this is urgent requirement.
    [email protected]
    Thanks & Regards,
    J.Lokesh

    If u want to add Items data, u have to handle the Table control by writing the complete code.
    U have to write code for 2 items, when u press enter u will get new row to enter new record one by one.
    Narendra

  • Legacy asset data upload for multiple line items

    Hello
    Legacy asset data upload for multiple line items- for example Building is an asset which is having different line items for purchasing of land,constructaion or renovation etc.........now to upload the legacy data what should be consider...only one line item for Building or numbers of line item.........
    which one is the proper way to do this exercise?
    regards

    Hi,
    It completely depends on clients requirement. but following are few approaches:
    1. Define Building as Asset Class.
    2. Create a Building at specific location at asset code and
    3. create asset sub numbers for other components.
    other approach would be:
    1. Define Building as Asset Class.
    2. Create a Building at specific location at asset code and
    3. create further asset codes for other components where field description will be used for relating each other.
    Regards,
    Sayujya

  • To Record  J1IS BDC  For Multiple Line Items

    Hi,
      Iam trying to record BDC for J1IS transaction.
    while  recording  material document which contains more than  8 line items , Only 8 line items get saved and the rest of the items doesn't get saved ,
        But when I  do this manually then  all the line items get saved,
        Can anyone give the remedy for this Problem (to record J1IS for multiple line items).
      Thanks in Advance.
    Regards,
    S.Janani.

    Hi Janani / Leo
    The problem might be that the scroll down functionality after 8 line items is not recorded in your recording.
    In order to overcome the issue, you need to check OK__CODE whicle page down and add it in recording after Number of line items are greater than 8.
    Please check below link for details:
    http://scn.sap.com/thread/1106677
    http://scn.sap.com/thread/797827
    http://scn.sap.com/thread/2037271
    Best Regards,
    Sachin

  • How to draw horizontal line at the end of table for multiple line items

    Dear Experts,
                       Pls can anyone help me how to draw horizontal line at the end of table for multiple line items . kindly help me regarding this
    Thanks
    Ramesh Manoharan

    Hi
       I tried as per your logic but it is not solving my problem .  when i am gone to table painter it is showing line type 1 and line type 2
      is below format.. if u see here line type 1 bottom line and line type 2 top line both are same..  so how to avoid this ?
                              line type 1
                             line type 2

  • "BDC for multiple line items of PO"

    I am using this code to move data for multiple line items of a PO. But only one is getting transferred. I am using BDC for this.
    FORM transaction_bdc .
      DATA :
      v_cnt(2) TYPE n,
      v_bst(2) TYPE n,
      v_bn TYPE i,
      v_bstpo(25),
      v_ebtyp(25),
      v_menge(25),
      v_eeind(25),
      v_xblnr(25),
      v_xblnr1(25),
      v_ebelp(2) TYPE n,
      v_ebelpt(2),
      v_menge1(11),
      v_ebt TYPE i,
      v_vebtyp LIKE ekes-ebtyp,
      v_eb(2) TYPE n,
      v_tcselflag(40),
      v_tem(2) TYPE n,
      v_correct TYPE i,
      v_file TYPE string.
      DATA: ls_outtab TYPE tb_struc.
      DATA: l_valid TYPE c,
            l_locked TYPE c.
      CALL METHOD g_grid->check_changed_data
        IMPORTING
          e_valid = l_valid.
      IF l_valid EQ 'X'.
        LOOP AT tb_output WHERE check EQ 'X' .
          MOVE-CORRESPONDING tb_output TO itab_output.
          APPEND itab_output.
          CLEAR itab_output.
        ENDLOOP.
        IF tb_output-check <> 'X'.
          MESSAGE e003 WITH text-004.
        ENDIF.
      ENDIF.
      IF itab_output[] IS NOT INITIAL.
        PERFORM open_group.
    ***looping at purchase order level.
        LOOP AT itab_output where ebelp is not initial .
          CLEAR v_bn.
          CLEAR v_ebt.
          PERFORM bdc_dynpro USING 'SAPMM06E' '0105'.
          PERFORM bdc_field USING 'BDC_CURSOR'
          'RM06E-BSTNR'.
          PERFORM bdc_field USING 'BDC_OKCODE'
          '/00'.
          PERFORM bdc_field USING 'RM06E-BSTNR'
          itab_output-ebeln.
    ***Changing alphanumeric fields and quantity fields to character type**
    *v_ebelp = tB_OUTPUT-ebelp.
    *clear v_ebelpt.
    *v_menge1 = tB_OUTPUT-menge.
    *v_ebelpt = v_ebelp.
    ***End Of Changing**
    *Checking for the exact number of the item**
          LOOP AT tb_output where ebeln = itab_output-ebeln.
            READ TABLE itab_output INDEX 1.
            IF tb_output-ebelp = itab_output-ebelp.
              exit.
            ELSE.
              v_bn = v_bn + 1.
            ENDIF.
          ENDLOOP.
    v_bst = v_bn + 1.
    *End Of Checking**
    **Mapping items**
            v_tem = 1.
            CONCATENATE 'RM06E-BSTPO(' v_bst ')' INTO v_bstpo.
            CONCATENATE 'RM06E-TCSELFLAG(' v_tem ')' INTO v_tcselflag.
            PERFORM bdc_dynpro USING 'SAPMM06E' '0120'.
            PERFORM bdc_field USING 'BDC_CURSOR'
            v_bstpo.
            PERFORM bdc_field USING 'BDC_OKCODE'
            '=DETA'.
            PERFORM bdc_field USING 'RM06E-EBELP'
            v_ebelpt.
            PERFORM bdc_dynpro USING 'SAPMM06E' '0111'.
            PERFORM bdc_field USING 'BDC_CURSOR'
            'EKPO-BSTAE'.
            PERFORM bdc_field USING 'BDC_OKCODE'
            '/00'.
            PERFORM bdc_dynpro USING 'SAPMM06E' '0120'.
            PERFORM bdc_field USING 'BDC_CURSOR'
            v_bstpo.
            PERFORM bdc_field USING 'BDC_OKCODE'
            '=BSTA'.
            PERFORM bdc_field USING 'RM06E-EBELP'
            v_ebelpt.
            PERFORM bdc_field USING v_tcselflag
            'X'.
    **Checking weather Confirmation category already exists**
            SELECT ebtyp FROM ekes INTO v_vebtyp WHERE ebelp =
            itab_output-ebelp AND ebeln = itab_output-ebeln.
            ENDSELECT.
            IF sy-dbcnt > 0.
              v_ebt = sy-dbcnt.
            ENDIF.
            v_eb = v_ebt + 1.
    **End Of Checking**
    **For Line items**
            CONCATENATE 'EKES-EBTYP(' v_eb ')' INTO v_ebtyp.
            CONCATENATE 'EKES-MENGE(' v_eb ')' INTO v_menge.
            CONCATENATE 'RM06E-EEIND(' v_eb ')' INTO v_eeind.
            CONCATENATE 'EKES-XBLNR(' v_eb ')' INTO v_xblnr.
    **End**
            PERFORM bdc_dynpro USING 'SAPLEINB' '0200'.
            PERFORM bdc_field USING 'BDC_CURSOR'
            v_xblnr.
            PERFORM bdc_field USING 'BDC_OKCODE'
            '=BU'.
            PERFORM bdc_field USING v_ebtyp
            itab_output-ebtyp.
            PERFORM bdc_field USING v_eeind
            itab_output-eindt.
            PERFORM bdc_field USING v_menge
            v_menge1.
            PERFORM bdc_field USING v_xblnr
            itab_output-xblnr.
    **End Of Mappings**
    *loop at itab_output.
            MOVE-CORRESPONDING itab_output TO ekes.
            modify ekes.
           MOVE-CORRESPONDING itab_output TO eket.
           MODIFY eket.
           MOVE-CORRESPONDING tb_output TO ekpo.
           MODIFY ekpo.
         ENDLOOP.
          CALL TRANSACTION 'ME22N'
          USING itbdc
          MODE   'E'.
          commit work.
    perform bdc_transaction using 'ME22N'.
    **End Of Purchase Order Loop**
        PERFORM close_group.
        endloop.
         endif.

    Hi Asha,
    check the below code once...
    LOOP AT tb_output where ebeln = itab_output-ebeln.
    READ TABLE itab_output INDEX 1.
    IF tb_output-ebelp = itab_output-ebelp.
    exit.
    ELSE.
    v_bn = v_bn + 1.
    ENDIF.
    ENDLOOP.
    Here you are reading the table itab_output with index 1, it means you alway reading the first record of that internal table.
    Regards,
    Satya.

  • Different currencies for multiple line items in a AP invoice?

    Hi, Expert,
    Is it possible to assign different currencies for multiple line items in a AP invoice?
    Eg:
    One vendor is supplying raw materials from different regions, and we have to raise one invoice with different currency rate  to each items 
    regards,
    Sanju

    Hi Sanju,
    It is not possible to assign different currencies for multiple line items in a AP invoice.
    Try to book the different documents(different correncies for a single vendor in a A/P Invoice).
    Regards,
    Madhan.

  • Changing Ship-To Parties for Multiple Line Items

    Hello!  I am wondering if there is a way to change the Ship-To party on a sales order at the line item, besides changing each line individually.  Is there a more efficient way to change the Ship-To party for multiple line items?  We are looking at creating a fast-change transaction to allow users to change the Ship-To party at the line item level for multiple lines.  Our particular transaction will make changes by delivery group.  Does anyone know if SAP version 6.0 will have functionality to allow users to change the Ship-To party for multiple lines at one time?  Thanks!

    HI ,
    Go to tcode MASS, enter the object BUS2032, then execte-enter, now select the mass odrer item data. Here u can change the req fields.
    cheers
    reward if helpful

  • Service Entry sheet Creation for Shipment cost Document

    Dear All,
    While creating a shipment cost document .A service PO is getting generated in the back ground based on which a service entry sheet is created and LIV is made.But in the configuration we are mapping the Transportation planning point to Purchase organisation alone.
    Can some one let me know whether the generation of PO in the back ground for a shipment cost document in the back ground is a standard SAP feature if so can you tell me the configuration steps.
    Regards,
    K.Vivek

    Hi,
    Creation of Service PO in shipment cost document is based on the following SPRO setting or T-code.
    T code : T_56.
    SPRO > LE > Transportation > shipment cost Document > Shipment cost types and item categoires.
    Get into the details of item categoires, you can see the indicator Generate PO.
    hope this helps.
    Harish

Maybe you are looking for