Service entry sheet deleted at header need to be undeleted

Dear Friends,
Pls note my client hv budget allocations & thru this only the procurement activities are happening.
Now in one scenario they had deleted one service entry sheet from header instead deleting thru line items & trying to create new service entry sheet. But the system is now not accepting & giving error as "Budget Exceeded" . By deleting the service entry sheet from header doesn't get deleted totally from system.It still considers those figures at the time of making new service entry sheet & gives error message. Kindly advise how to delete this service entry sheet totally from system. Is their any program to run for this in system??

Hi
If u r creating SES, system will post one material document along with SES. If u revoked or cancel the SES, the system might hv issued a another material document in the amount u reversed.
Check it out both are existed in the PO history tab.
If yes, then clisk on the SES, it should be in no acceptance mode.
Then u can create new SES.
Check it out.
Regards,
Raman

Similar Messages

Service Entry Sheet Deletion

Hello Friends,
My client is facing a problem while creating a service entry sheet for a PO. In the PO history it is showing a service entry sheet(SES) is created for a line item. But that SES has been revoked and deleted also. But the concern is although the SES is deleted, total values (Amt in LC) is still showing in the PO history. The value is not being changing to zero in PO history.
When user is attempting to make another SES for that line item, as the PO is open now, an error messege displaying which says the entered quantity exceeds the PO quantity. Messege No - SE363.
When i am trying to do the same scenario in development, system is working fine, i am not getting that error. I am able to make futher Service Entry Sheet.
It will be great help if anyone can give me some feedback on this at the earliest.

Dear Frnd,..
This is a std system bug. Which is not reproducable.
Please use SAP note - 126285.
Whice will provide you with Report RMBESTK2.
with following coding. create a report with this coding and assign a T-Code to it. And use it when you face such an issue in future.
Amit P hiran
Njoy SAP...
Njjoy Lyf...
Edited by: Amit P Hiran on Jun 21, 2010 4:59 PM

Reset the Service entry sheet deletion flag.

Dear all,
How to Reset the Deletion flag for the service entry sheet.(To remove the deletion flag)
Thanks,
Cherry

Dear Cherry,
I am afraid I must confirm that the system is working as designed in
this case.
It is not possible to cancel the deletion indicator once it has been
set in a Service Entry Sheet. None of the two currently available
transactions to maintain Service Entry Sheets support this functionality
(this is, the deletion indicator cannot be reset via ML81 or ML81N: None
of the two transactions allow this).
We had got the similar issue from the other customers and developers replied that:
"The service entry sheet is an accounting document, and once you
delete it, can no be undelete it."
Best Regards,
Arminda Jack

Inconsistence at PO History - Entry Sheet deleted

Hello everyone!
I have an issue at my system with an entry sheet that has been deleted.
This Entry sheet was deleted and the material document with movement type = 102 was well created.
But the entry sheet is not showed now with total = 0 but with its original value.
Because of this, when we need to create a new Entry Sheet for the rest of the PO, an error message is raised like there were no more units to receive.
Do anyone know if it is a bug at the system, like a usual problem that can be solved with any OSS note?
Thank you all in advance.
Regards,
cecil

See the notes
193429
There are many other notes available and can be used to resolve your problems
so serch with 'service Entry Sheet deleted' along with your system version.
Hope this will resolve your problems

Report for Service Entry Sheet in MM

Hi all,
Is there standard data source & infoproviders are available for "Service Entry Sheet (ML81N)".
We need to develop a report for service receipt confirmation along with PO & Vendor payment details.
Looking forward your answers.
With regards,
MK.

HI,
Yes, WBS wise PO details showing in T-code ME2J - Purchasing Document Per Project .
Enter the above T-code and select Database Profile ' 000000000008-PO Display for WBS' then give inputs project code,WBS Element,plant,Scope fo List-'ALV'.and execute the report. Now, report showing the selected WBS Purchase documents.
Hope, it is useful for you.
Regards,
K.Rajendran

Deletion of service entry sheet

dear Gurus,
I want to delete a service entry sheet which has been made already..how do i delete it? Thank you

Dear,
Enter t-code ML81N.
Enter your service entry sheet number.
Than click on change button of header level.
Than click on Revoke acceptance.
and click on save button.
After click on save button. Second time click on change button.
So system display you deletion flag indicator like dust bin.
Than set it(click on deletion flag button) and click on save button.
Regards,
Mahesh Wagh

SRM - Delete confirmation (service entry sheet)

Hi,
we have the 5.00SRM.
The user tried to post twice the same confirmation (service entry sheet) so the system replicated the first one in R3 and the second is in error for the Purchase order lock (message class SAP-T100 message-id BBP_ADMIN 010).
It's right that the second is in error (Luckly!!!), but now we don't know how delete it (the second wrong confirmation), because in the confirmation transaction the delete button is inactive. Now the user need to create a new confirmation for the same purchase order, but since now all the confirmations for that purchase order go in error.
Please, help me ... I looked all SAP notes and forum messages but I didn't find the solution.
Thanks
Lara

Hi
Which SRM scenarion and version are you using ?
Seems to be some bug in the system (Either due to wrong implmentation of some OSS note or some other reasons).
Anyways, better to raise an OSS message with SAP as well.
Refer to following OSS notes.
535765 Too many entries in BBP_DOCUMENT_TAB
1028584 You cannot delete confirmations that are in approval process
863198 Confirmation screen is locked on click on delete button
668829 Error when deleting held goods receipt confirmations
852327 Disable Deletion of Confirmed PO Items
994529 Conf can be deleted despite error in DOC_CHECK_BADI
778489 Partial confirmations for back-end service purchase orders
602973 Duplicate error messages during confirmation
499917 EBP: deleted return delivery: BBPERS creates no invoice
786051 Deleted service lines are checked
515754 Deletion of held confirmation documents in back-end case
355138 Cancellation of goods receipt/service confirmation
430660 Deletion, change, return delivery possible after return
Hope this will help.
Regards
- Atul

How To delete Service Entry Sheet

Dear Experts
How to Delete the Service Entry Sheet , or cancellation ,there is no Material Document generated for that entry.
Actually we have making the Service Entry through ML81n but system does't make Document Nos, directly Entry sheet nos is there.
Rgds
Pankaj Agarwal

Hi Pankaj,
Enter t-code ML81N.
Enter your service entry sheet number.
Than click on change button of header level.
Than click on Revoke acceptance.
and click on save button.
After click on save button. Second time click on change button.
So system display you deletion flag indicator like dust bin.
Than set it(click on deletion flag button) and click on save button.
Regards,
Nani.

Procedure to delete Service entry sheet

Hello
How to Delete the Service Entry Sheet , or cancellation ,there is no Material Document generated for that entry.
Thanks

Hi Nilesh,
Deleting the Service Entry Sheet.
Enter t-code ML81N.
Enter your service entry sheet number.
Than click on change button of header level.
Than click on Revoke acceptance.
and click on save button.
After click on save button. Second time click on change button.
So system display you deletion flag indicator like dust bin.
Than set it(click on deletion flag button) and click on save button.
Cancel the Service Entry Sheet.
1)Go to transaction code ML81N.
2) Go to Entry Sheet
3) Go to Set Status
4) Go to Cancel release
Regards,
Nani.

Delete/Cance/Reverse service entry sheet

Hi,
Plz help me out in the issue relating to the service entry sheet, where in i have done the service entry & posted invoice document with respect to the service entry sheet.But now my requirement is to delete/cancel/reverse the service entry sheet b'cos we have booked the service expenditure to the wrong account & now i need to make the rectifications for the same & book to the appropriate account.I have reversed the invoice document with THE TRANSACTION CODE MR8M but iam not able to findout the solution . Plz suggest ....
Regards,
Gangadhar Nalluri
Message was edited by: Gangadhar nalluri

Hi,
Now you can reverse or revoke the service entry sheet using tcode ML81n.here click on display<->change button then you will get one button 'Revoke' in appication tool bar.using this button you can reverse service entry sheet.after this you can also delete SES using delete button.When you revoke the service entry sheet all accounting docuements will also be reserved automatically.
Hope this will helps.
Regards,
sunitha.

Cannot delete Service Entry Sheet

Dear Experts,
Can please help me for the error encountered while deleting the Service Entry Sheet?
Error: Total takeoff quantity for (Service Entry Short Text) is getting < 0 . Processing not possible.
Message: BOS01182
Thank you,

Hi
For deleting the Service Entry Sheet (SES)
Enter t-code ML81N and enter ur SES no.
Then click on the change button at header level.
Then click on Revoke acceptance and save
After click on save button. Second time click on change button.
So system will display you deletion flag indicator like dust bin.
Than set it(click on deletion flag button) and click on save button.
To cancel SES
1. Go to ML81N Tcode
2. enter your SES no
3. Go to change mode
4. Unrelease service entry sheet by selecting Menupath Service entry
->Set Status -> cancel release
5. Then selct Menupath as Entry sheet -> delete
Check it out
Regards,
Raman

Can not delete service entry sheet having Items with zero quantity

Dear Experts ,
I am having one service entry sheet with many line items out of which some line items are having quantity zero. Now when trying to delete the service entry sheet , system is asking to fill the quantity . since there are already some other service entry sheets through which full quantity equal to Purchase order quantity for that service line item has been already entered , the system is giving message "quantity exceeds" if even quantity 0.01 is entered for namesake to allow delete of entire SES.
The user had saved this service entry sheet & left it as it without acceptance for long time , it is required to be deleted as whole.
Please advise how it can be deleted as system is not allowing it to delete & asks quantity to be filled NOW where quantity had been entered zero while previously saving .
Thanks in advance ,
Regards,
Anil Shanbhag

Hi ,
The SES has all line items with WBS elements , the idea to delete the SES is to free-up the budget which is commited due to creation of this SES.
I have tried deleting individual line items in SES ,but system gives error "enter quantity" where line item quantity is zero. there are few such line items with quantity zero out of total 26 line items in the SES.
I want to know whether Blocking of SES at header level will free-up the budget as it is the basis purpose for deleting SES , which i think may not serve the purpose.
Kindly advise. Thanks for your inputs.
Warm Regards,
Anil

VALUE IN PO HISTORY OF SERVICE ENTRY SHEET EXIST EVEN AFTER DELETION OF SES

Respected All,
My client has prepared a down payment request , prepared a service purchase order against that vendor, created service entry sheet.
Later on he came to know that the qty he has entered is wrong ,so he reversed all the goods receipt(done 102 Mvt) , deleted the service entry sheet and now trying to create new SES against the same line through ML81N.
But the Qty column after selection of services is coming blank, i have checked the po history, in that the GR Qty and value is zero and service Qty is zero but service value and down payment column still contains the value, though we have reversed the service entry seet.
please guide me what to do to reflect the qty part in ML81N again.
Thanks and Regards
Abhay Mahodaya

can you see the material document with reverse movement ( 102 ) ,corresponding to your cancelation of SE sheet in the P.O history tab?
also check whether the 'actual quantity' in the Service entry extreme right column shows zero.
check in the deleted SE sheet history tab 'change document' button whether the last row change mentioned is setting deletion indicator

How to set deletion indicator to SERVICE ENTRY SHEET

Dear Experts,
Please explain, is it mandatory to set Deletion indicator to Service entry sheet before Start of Archiving Service entry sheet.
Also explain Procedural steps to set deletion indicator to service entry sheet.
Thanks in Advance

Dear,
First of all Revoke Acceptacne as
Entry Sheet --> Set Status --> Revoke Acceptance .
After that you can delete....but no Invoice must be exist.

HOW TO SET DELETION FLAG TO SERVICE ENTRY SHEET ?

Dear Experts,
Can anybody explain how to set deletion flag to Service entry sheet created ?
Service Entry sheet has been accepted and saved, i want to set deletion flag to the Service Entry sheet.
Thanks in Advance

Hi,
Go to ML85 and give your service entry sheet no in Entry sheet data and select "cancel release" check box and give the corresponding release code and execute and save. The release gets cancelled.
The other way is go to ML81N and give your Po and service entry sheet and click on the icon "cancel release" (reverse arrow mark) give the corresponding release code for cancellation and save. Now the service entry sheet will go to "No acceptance" mode. again go to the change mode and select the line item and delete it by clicking on delete icon.
regards,
Kannaiah Naidu

Service entry sheet deleted at header need to be undeleted

Similar Messages

Maybe you are looking for