Service entry sheet error

Hello All
Service Po is created with one line item & four sub service line item details ( for Services PO cost center, GL account, Fund & fund centre is given ) During the making Service entry sheet getting error " Error in account coding allocation"
Please suggest what could be reason for the above error
Thanks in advance
Regards
Rajesh

Hi,
please kindly check the notes:                                                                               
561466  Service account assignment is lost                                
809317  EXIT_SAPLMLSK_001: Customer data not correctly adopted            
1087090 Error in accounting when exit EXIT_SAPLMLSK_001 is active      
The cause for "SE508" can be also if there is an inconsistency in the tables ESLL and ESKL: the  field 'LOEKZ' has been set in the table ESKL for the PO service accounting information, but it does not reflect in the table ESLL for the same service lines. I would recommend you to check the deletion flag in both tables for the services in the PO item.
If the problem still exists, please open a SAP ticket.
Regards,
Edit

Similar Messages

  • Ml81n- service entry sheet error

    Dear Experts
    I have getting error in Ml81n-service entry sheet,
    i was tested cost center master data i has given in  PO,in my company cost centers are delimited (01.04.2014 to 31.12.999 )
    now system showing ks02-pop-up will get showing 2 delimited line item, i have execute in 1 line item not showing Profit enter, Second line item showing profir cnter.
    Please provide me solution for that.

    Can you please elaborate the issue what exactly you are
    getting.

  • Regarding Service entry sheet error

    Hi,
    As per above subject service entry sheet make time quantity exceed error but my work order quantity available. Work order total qty 4000 m3 & service entry done qty 3200 m3 balance qty is 800, my today service entry sheet qty is 84 m3 only then why coming error help me.
    Thanks,
    Ajit Waghmare

    Hi,
    PLease check at Purchase Order History Tab in PO, how many SES has been mmade for the activity / service number. It might happen that there are SES created but not accepted for the activity.
    Regards,
    Rakesh

  • Service entry sheet error.with new material group for services

    Dear Experts
    We need to create material group for  roll shop spare parts service,we created a new material group.
    when we are creating PR/PO with item category as D and a/c assignment K( entered cost center here).its giving error message
    as RC= 3M8 47 Account determination for entry JSL KBS J001 not possible(while making service entry sheet)
    after that i changed PR/PO and gave cost center and G/l account.now the service entry sheet is accepted.
    is it necessary give G/L account manually,if user chose wrong G/L account how to avoid this problem.
    please clarify me,
    do we need to assign valuation class for material group for services?(where to assign)
    or
    should assign G/L account manually to cost center while creating PR/PO
    Please clarify me
    Regards,
    Varun
    Edited by: madhu varun tirupati on Sep 8, 2010 2:48 PM

    Hi,
    Option-1:-- >
    Without creating material group and you can use your other service material group(existing service material group) and  create a service master  in AC03 as spareservice. Create a Service PO with text as roll shop spare parts service with other details as required like quantity of service, cost center & G/L account etc. After service being completed you can do SES in t.code: ML81N
    Option-2:-- >
    If you want report at the end based on different material/service group level, you can create a material/service group in OMSF for roll shop spare parts service and then you can assign to valuation class to material group in OMQW t.code. Then carry out regular process service order, SES etc.
    Based on requirement, you can enter G/L account manually or can set default G/L account in purchasing document with help of t.codes: OMSK, OMQW, OME9, OMGO & OBYC
    For error u201CAccount determination for entry JSL KBS J001 not possibleu201D, you cannot assign KBS transaction/event key to an account in OBYC t.code. Only you can assign G/L account to cost center with your CompanyCode in OKB9 t.code. Check the SAP note: 364570 & 106981
    Regards,
    Biju K

  • Mm-service entry sheet

    hi gurus, pls guide me in this issue
    While Creating Service Entry Sheet Error occured that Qty entered
      exceeded by Qty in PO
    rgds

    Hi,
    Please check the config. for the tolerance limits in SPRO->Material Management->Logistics invoice verification-> tolerance limits for the invoice verification.
    you can have this at company code level or at vendor level.
    Regard

  • Error in Posting Service Entry Sheet - FI 311 No Commitment Item in Item 1

    Dear All,
    We need a suggestion/solution for the following problem :-
    Our customer had raised purchase orders for services in may 2010. The following critical entries were made in the purchase order.
    Account Assignment Category was P-Project
    The WBS element was entered as the Accounts Assigment Category was P.
    The user was entering uncoded services. Hence the material group for that service which had G/L a/c tagged to it was entered. But the G/l code was not populated in the purchase order by the system at that time of creation of purchase order and subsequently the user was able to save and release purchase order.
    The user was able to post Service Entry Sheet and generate accounting entries in june 2010.
    Additional service entry sheets are required to be posted for the remaining quantites. The client has urcated the SES process into two parts.
    1. Through T-code ZML81N the end user is able to create and save the SES.
    2. Through T-code ML81N the Head of Department is able to approve and post the SES which results in generating of accounting entries.
    Presently the user is able to create SES with tcode ZML81N. But when the HOD tries to approve and post the ses we get the error.
    FI 311 - No commitement item maintained in Item 0001 in P220 (company code).
    Fund Management is active in this company code and all settings related to Funds Management and FI have been checked by respective consultants.
    The end user is not having any problems in processing SES for current Pos. But he is not able to create SES for the POs created in May, 2010 for which the user has already created and posted more than one SES against the same POs.
    We have already escalated it to SAP.
    Thanks in advance
    Anil Shanbhag

    Hi,
    Use T.code:FS00 and check G/L account 280000 is there in your company code or not.
    If yes, check its nature(type/description,control data , cretae bank/intererst tabs)of G/L
    NOTE: Also check and compare the field selection between Movement type 101 & your G/L account 280000 in SE38 t.code with  Program RM07CUFA
    Regards,
    Biju

  • Error while creating service entry sheet

    Hi Experts,
    I am trying to create service entry sheets using bapi 'BAPI_ENTRYSHEET_CREATE'  for a purchase order with multiple line items. The bapi creates SES for the first line item but gives error 'User xxxxxx already processing purchase order nnnnnnnnnn' for the rest of all. Tried using 'COMMIT AND WAIT' after bapi call but it's not working.
    Kindly help me out with the solution.
    Regards,
    B.Siddhesh

    Hi Siddhesh,
    Please use below code before calling the 'BAPI_ENTRYSHEET_CREATE' to unlock the PO.
    Hope this is helpful.
    **Delete the Lock objects EKKO Header PO.
         CALL FUNCTION 'ENQUEUE_READ'
           EXPORTING
             GNAME  = 'EKKO'
             GARG   = ''
             GUNAME = SY-UNAME
           TABLES
             ENQ    = ENQ
           EXCEPTIONS
             OTHERS = 0.
         IF NOT ENQ IS INITIAL.
           DESCRIBE TABLE ENQ LINES SY-TFILL.
           CHECK SY-TFILL > 0.
           CALL FUNCTION 'ENQUE_DELETE'
             EXPORTING
               SUPPRESS_SYSLOG_ENTRY = 'X'
             IMPORTING
               SUBRC                 = RC
             TABLES
               ENQ                   = ENQ.
         ENDIF.
    **Delete the Lock objects EKPO Header PO.
         CALL FUNCTION 'ENQUEUE_READ'
           EXPORTING
             GNAME  = 'EKPO'
             GARG   = ''
             GUNAME = SY-UNAME
           TABLES
             ENQ    = ENQ
           EXCEPTIONS
             OTHERS = 0.
         IF NOT ENQ IS INITIAL.
           DESCRIBE TABLE ENQ LINES SY-TFILL.
           CHECK SY-TFILL > 0.
           CALL FUNCTION 'ENQUE_DELETE'
             EXPORTING
               SUPPRESS_SYSLOG_ENTRY = 'X'
             IMPORTING
               SUBRC                 = RC
             TABLES
               ENQ                   = ENQ.
         ENDIF.
    Reward if helpful.
    Regards,
    Shakeel Ahmed

  • Error: while creating Service Entry Sheet - for HELD PO

    Hi experts,
    While PO XXXXXXXXXX is in the status of Hold. System allowed me to create & delete a service entry sheet(SES) on particular date.
    Another day i tried to create SES for the same PO. System is not allowing me to create SES and it gives me error as  'Purchase order XXXXXXXXXX incomplete (parked)'.
    While debugging I found that ekko-memory field set to 'X'. At this point I am getting error.
    My question is why the system is allowed me to create SES for a PO which is in HELD status?.
    Please help me.
    Thanks In advance,
    Vinod

    Thanks for the reply.
    We are aware that system will not allow to create Service entry sheet for held po. But it is allowed me to create on a particular date. Another day i tried to create/delete a SES for the same PO or new PO(held status)  system is not allowing me to delete/create SES.
    Please help me what might be the reason which allowed me on a particulare date.
    Thanks in Advance,
    Vinod....

  • Error while saving service entry sheet

    Hi Gurus
    I m getting the following error while saving service entry sheet
    Account determination for entry MGCA WRX not possible
    Req. for help
    Eldee

    Hi,
    Use T.code:OMWB,
    Enter Chart of Account,Now you will have new screen,
    Click WRX, sys will take to new screen
    Click Rules,select check box of debit and credit only and save.
    Now enter you G/L accounts(GR/IR) in debit and credit field and save.
    Now try your transaction.
    If helpful to you then reward.
    Regards,
    Biju K

  • Price error while entering Service Entry sheet.

    >HI All,
    >the scenario is like this :-
    >We have enter uncoded services in the Services Tab of item details and have entered qty and gross price alongwith wbs element. There are about 63 lines ltems, while selecting the first only three are getting selected correctly the line items 04 to 08 are giving the following error. The line items 09 to 63 are also giving no error. But the below said error is coming for line item no. 03 to 08.
    Enter a price.
    When we try to enter a price it does not accept.
    and gives an error message SE316.
    Enter a price
    Message no. SE316
    The functionality requires that a price must be entered for service lines in purchase orders and service entry sheets.
    If you have to enter a line with the price "0", you can mark the line as an informatory line.
    We try to sent the price in the column but it is not accepting the price.
    What could be the solution to this error.

    Hi,
    Take help of FI Consultant and write a Substitution in GGB1.

  • Error ' Quantity exceeds quantity in PO' in service entry sheet creation.

    Hi,
    I am getting error "Quantity entered 7,000 exceeds quantity 5,000 in purchase order' ,  Message no. SE363" while creating service entry sheet
    PO Quantity - 1 AU
    Service  quantity - 5 HR
    in service entry sheet creation i am giving 6HR instead of what is planned in PO
    Not sure what driving this error, please help
    Thanks

    Hi
    Could you please check if Message SE 363 is set as an E (Error) in the IMG transaction OME0?. If it is set to an error you will not be  able to accept service overdeliveries even if you have the unlimited indicator set.                                                                               
    Regards,
    Mauro

  • Error ME006 when releasing Service entry Sheet in ML81N

    Dear Gurus,
    There is a Pop up error message, when service entry sheet is release and saved (Error ME006 when releasing Service entry Sheet in ML81N ). BUt after ingnoring, the service entry sheet is released. Please advice what is the issue with this error ME006 Message
    One more confiq - in SM31 >> T100 (Table) >> ME (message class) >>> Message number 006 - Self explantatory is ticked.
    Thanks
    RS
    Edited by: Ramapuram Saravanan on Jan 20, 2009 10:39 AM

    Please check the lock entries in the Transaction code SM12,there must be one lock entry for this.
    Please delete it.
    Regards,
    Manish

  • No Matching PO Error Number SE 559 In Service entry sheet

    Hi All,
    I have created a service PO with Item category D and Account assignment as K. Now when I am going to ML81N and entering this PO system is showing the error " No Matching PO".
    Please suggest.
    Thanks in Advance
    Pavan H S

    Hi
    Steps involved in Service PO:
    1.     Define Organizational Status for Service Categories, in IMG - MM - External Services Management.
    2.     Define Service Category, Enter Service Category, Org. Service Category, External Number Assignment
    Without Validation, Acct. Category Reference & Service Category Description.
    3.     Define Number Ranges for Service Category.
    4.   Create Service Master Record (AC03), SAP Menu u2013 Logistics u2013 MM u2013 Service Master, Enter Service Category,
          Base unit of measure, Mat/srv.grp (007 u2013 Service), Division, Valuation class u2013 3200 & Service type.  
    5.     Create Service PO with Acct. Assignment u2013 Cost Center (K), Item Category u2013 D, Material Short Text, Mat. Group, Plant, Entry for Services in Item Level i.e. Service No., Quantity & Gross Price u2013 Save.
    6.     Maintain Service Entry Sheet u2013 ML81N in SAP Menu u2013 Logistics u2013 MM choose PO in ML81N edit and save.
    7.     Then do MIRO from PO reference u2013 Service Entry sheet.
    8.     Collective Release of Service Entry Sheet u2013 ML85
    Thanks & Regards,
    Senthil.

  • Service entry sheet posting error

    Dear SAP Gurus,
    While service entry sheet saving,system floats following error:
    "Error posting acceptance of entry sheet NO 1123456789
    choose:
    1)error log
    2)Save w/o acceptance
    3)exit without saving"
    what couuld be the reason for above mentioned error?
    thanks in advance,
    saran.

    hi,
    goto tcode:ML81N
    HERE U CHOOSE THE TAB ACCEPTANCE DATE
    HERE U MAITNTAIN THE PERIOD
    U PRB IS SOLVED
    regards
    kavi

  • Service entry sheet -Warning or Error message

    Hi Everyone....
    I have one issue related to Service entry sheet, i.e, it's possible to change a service entry sheet without the accepting.Due to the finance procedure my client has decided that it should not be possible to save a service entry sheet without the acception and it should give the warning or error message.
    Please check above requirement and suggest me on this.
    Regards,
    Nag.

    Hi Raju,
    Thanks for your update.
    Is there any way to set as mandatory for the Acceptance Indicator in Service entry sheet?
    Prompt response on this issue is highly appreciated.
    Regards,
    Nag

Maybe you are looking for