(SERVICE ENTRY SHEET) ML81N

Hi all,
while entering service entery sheet in Quantity i want after dicimal four digit means ( 0.0012),but its not taking more that three digits. i mgetting error-
Input must be in the format .__.___.__~,___V
Message no. 00088
System Response
The entry in this field was rejected.
Procedure
The entry must comply with the edit format. The following edit format characters have a special meaning:
"_" (underscore)
There should be an input character at this point; this should be a number for numeric fields.
"." (decimal point) (applies to numeric fields)
The decimal point occurs here (setting in the user master record).
"," (thousands separator) (applies to numeric fields)
This separator occurs (optionally) for more than three figures. Depending on the setting in the user master record, it can be a period or a comma.
"V" (applies to numeric fields)
The operational sign appears here. If used, it must by at the right margin of the field. The sign is either "-" or " "(space).
"~" (tilde) (applies to numeric fields)
As of and including this character, leading zeros must also be entered. Otherwise, this character has the same meaning as an underscore. Leading zeros need not be entered on the left of the tilde. They are not output at this position.
All other characters have their normal meanings and must be entered in the same position as in the edit format.
Please help me to resolve this issue.
Thanks,
siddharth

Hi
Have you checked in CUNI t-code ?, decimal places for units of measurements can be set there.
Thanks !
E.Avudaiappan

Similar Messages

Dump during creation of service entry sheet (ML81N)

Dump during creation of service entry sheet (ML81N)
Hi,
ML81N>Select PO>Enter>goto entry sheet create (empty page)>service entry sheet displayed with internal no. assigned >click tab "service selection">Input PO No.--> enter (here we get Dump ABAP RUNTIME ERROR "TABLE_INVALID_INDEX").
This is happening only for some POs. What can be the problem?. Is this has something to do with SAP database ???
- rahul

Hi,
it could have the cause that the note 1113220 was missing from your system or that data are inconsistent in your PO.
If you implemented 1113220 and you still get the dump, please check in transaction ST22 the run time error long text to the dump:
Parts:
- How to correct the error?
- Information on where terminated
- Source Code Extract -> if you set a breakpoint before the line where the error occured, you could debug the process.
- Active Calls/Events: if you have an own program displayed here, please check first your program wether it has caused the issue.
If these do not help to find out the problem cause, please open a SAP ticket and include all of the relevant information regarding the dump.
Regards,
Edit

Assignment Feild in Service entry sheet - ML81N

Dear All,
We need to add assignment Feild (ZUONR) in Service entry sheet (ML81N).
Can any one suggest the posssible solution.
Thanks & Regards

Hi JKTECH TEAM ,
As a standard process , system is not going to given Assignment field as input field for ML81N. you can use reference or Document header text.
If you required you can use reference or Document header text or you can use user fields.
If you still required you need to maintain customisation through Exits :
INTERFAC            Interface for data transfer
SRVDET              User screen on tab strip of service detail screen
SRVEDIT             Service list control (maintenance/display)
SRVENTRY            Unplanned part of entry sheet (obsolete since Rel. 3.1G)
SRVESI              Data conversion entry sheet interface
SRVESKN             Set account assignment in service line
SRVESLL             Service line checks
SRVESSR             Set entry sheet header data
SRVEUSCR            User screen on entry sheet tabstrip
SRVKNTTP            Setting the account assgnmt category when reading in, if "U"
SRVLIMIT            Limit check
SRVMAIL1            Processing of mail before generation of sheet
SRVMSTLV            Conversion of data during importing of standard service cat.
SRVPOWEB            Purchase order for service entry in Web
SRVQUOT             Service export/import for inquiry/quotations
SRVREL              Changes to comm. structure for release of entry sheet
SRVSEL              Service selection from non-SAP systems
Please choose your choose.Because Assignment field is given for Sorting purpose of any documents

Purchase Order: Queries related to Service Entry Sheet (ML81N)

Requirement:
A user exit to be trigger during the changing (update) of service entry sheet, This user exit should have a code which will go and check the credit memo in RSEG- SHKZG where the value is “H” and will check RSEG- LFBNR number with ESSR-LBLNI and compares RSEG- SHKZG with ESSR- NETWR value of the service entry sheet. if the value is less then or more then ESSR- NETWR (service entry sheet) value it should throw an error “"Amount must equal Service Entry”.
If the RSEG- SHKZG value and ESSR- NETWR value are equal it should allow to revoke the service entry sheet.
Scenario: When user clicks on Change button in ML81N for changing the Service Entry Sheet(existing one), an exit should trigger the error message and should not allow to change.
Please suggest how to achieve it, which Exit to use where I should code?

Hi Amol
Why you created Framework Order ?.. You can not change account assignment category in service entry sheet..e.g. K-Cost Center.. F- Order
But depending upon settings, you can change account assignment values such order 1 to order 2
If there are requirement that SES can created for Account assignment F or K. I recommend you to use following approach
1. Create a Contract - ME31K with AAC as U- Unknown (If business already have rates negoiated with vendor for services)
2. Create release order with reference to contract and system will prompt you to enter AAC- it can be K or F
3. Perform SES w.r.t to Release Order.
Other Approach can but not strong one.. create two line items in the PO. one with K and Other with F.. then choose the line item at time of SES creation that business want to book the cost on CC or Order.
Thanks,
Jagdeep

How to block WBS or Network element field in Service Entry Sheet ML81n

Hi Guru
Would like to seek your advise on the following query.
We use Service master to trigger Purchase Order Service related (Item category = D; AAC = P).
Then, user will use T\code ML81n to create service entry sheet by reference to Purchase Order and service master document. During Service entry sheet creation, usually WBS element or Network element field will be populated automatically based on the information from Purchase Order.
However, user could overwrite the WBS element or Network element in service entry sheet. Thus, it creates discrepency WBS\Network element between PO and Entry Sheet.
1. Is there any way we could retrieve Service entry sheet not to allow user to update the WBS\network element field?
2. What will be the impact if we block the field from user.
Please advise

Hi Rag
Thanks for your reply.
When I trace the service master, there is no specify field to input WBS element.
Also, I have checked the service master entered by user, it seems that only the following fields are filled:-
Service Category
BuoM
Mat\Service Group
Valuation class
The rest of field are remained as blank as it might due to multiple WBS element shared 1 same service master
Please advise how I should block the WBS element from service entry to prevent overwriting.
Thanks

Configure service entry sheet ML81N

How to configure field selection for ML81N....
accept data......ref. field for inv. i want to make it mandatory...
plz. help.......
thanks
navin

Hi
Kindly check SPRO , In which MM>External service management
In Service entry sheet
The screen field settings are T code related, check the field settings against the ML81N transaction
currently i dont have sap access ,so i cant able post the exact navigation
Anyway try this
Regards
Amuthan M

Exit while releaseing Service Entry Sheet ML81N or event

Hi,
Any exits/ events while releasing a Service Entry sheet?
Thanks,
Krishna.

hi,
Check the User Exits for ML81N
Exit Name           Description
INTERFAC            Interface for data transfer
SRVDET              User screen on tab strip of service detail screen
SRVEDIT             Service list control (maintenance/display)
SRVENTRY            Unplanned part of entry sheet (obsolete since Rel. 3.1G)
SRVESI              Data conversion entry sheet interface
SRVESKN             Set account assignment in service line
SRVESLL             Service line checks
SRVESSR             Set entry sheet header data
SRVEUSCR            User screen on entry sheet tabstrip
SRVKNTTP            Setting the account assgnmt category when reading in, if "U"
SRVLIMIT            Limit check
SRVMAIL1            Processing of mail before generation of sheet
SRVMSTLV            Conversion of data during importing of standard service cat.
SRVPOWEB            Purchase order for service entry in Web
SRVQUOT             Service export/import for inquiry/quotations
SRVREL              Changes to comm. structure for release of entry sheet
SRVSEL              Service selection from non-SAP systems
SRV_FRM             SRV: Formula calculation (obsolete since 4.0A!)

Multiple account assignment in service entry sheet (ML81N)

Hi all,
Is there any difference (other than the number of service entry sheet lines) if I create one service line in ML81N using the multiple account assignment screen with 2 different order numbers or 2 SES lines with single account assignment? There is a difference when purchasing materials but I am not sure about services since you accept (post) the entire service entry sheet and not a line item.
Thanks!

Hello Adriana,
If you created an unplanned service PO, did you designate an account assignment on the PO or did you mark with an unknown account assignment? The other question I would have is whether you marked your PO as service based invoice verification? The answer to these questions may help me provide a more accurate response.
From my perspective, the process within the service entry sheet would not matter if you do the one line item versus the two line items. Ultimately the question would be how the AP processor would see the information when they process the invoice through MIRO (e.g. will they see one line or two). If you are not using service based invoice verification, then the two options you should provide the same result (e.g. one line item on the MIRO screen).
Hope this helps.

Error message SE508 while create Service Entry Sheet (ML81N)

Hi,
In client production system we are facing problem of getting error message SE508: Error in account coding allocation just after we click "adopt services"tab while creating service entry sheet (with respect to PO)Tcode ML81N.Please analyse the problem and give us solution as why it is happening? Please look at error screen shot with steps followed (in attachment) for your reference.
ML81N>Select PO>Enter>goto entry sheet create (empty page)>service entry sheet displayed with internal no. assigned >click tab "service selection">Input PO No.> click "adopt services"> here we get error message "SE508":ERROR IN ACCOUNT CODING ALLOCATION
Regards
Rahul Shukla

Hi,
I would suggest you to check the note 1087090 first.
Further I would like to recommend you to deactivate the exit EXIT_SAPLMLSK_001 in case it is active in
your system.
If the note 1087090 doesn't apply, please check the services data in the tables ESKL and ESLL. If PO services data have been deleted in the corresponding PO item, please check all of the deletion indicators in ESKL and ESLL. There must be an inconsistency. For example: the field 'LOEKZ' has been set in the table ESKL for the PO item, but it does not reflect in the table ESLL.
In table ESLL, there is no logical or physical deletion but the
services in the table ESKL has been marked (i.e logically deleted) -> this could be the reason for the error message SE508. For this case please open a SAP ticket to get help with the correction of the inconsistency.
Regards,
Edit

URGENT VERY URGENT---------Error in Service Entry Sheet-ML81N

Dear Experts,
I am getting a Error msg while creating a Service Entry Sheet by ML81N. It says that " You cannot enter an Unplanned Order". wht to do pls help
Its urgent
Thnx
Sankha.

yes u have to make the serv entry sheet with rspt to Serv. P.O just go to ML81N here click on create icon, a small box opens here give the p.o no & click on continue.here give all necessary details like desc, valid dates , serv, location, etc then click on serv. sel tab which is at below then all line item which r in Serv. p.o will be picked up.
Hope this can help
Reward if useful,
KM

Vendor Evaluation TAb in Service Entry Sheet (ML81N)

Hi,
While creating a service entry sheet, we have a tab named 'Vendor Evaluation".
In that tab there are two fields.
We want to add more fields there.
Is it possible?
Regards,

Hi,
Please review the note 79166 which explains that you can setup 2
sub criteria one with 'C' and one with 'D' using the standard criteria
04 'service'.
Now, if you need more than 2 sub-criteria, you will have to use a user
exit to use your own sub-criteria and calculation.
Please have a look to note 45748 for more detail of the user exit for
vendor evaluation.
Run transaction SMOD , enter enhancement MM06L001 . Then you can see
three functional modules:
- ATTRIBUTES
Extension          MM06L001
Short text         Exits to determine ratings in vendor evaluation
- COMPONENTS
Function module                ShortTxt
EXIT_RM06LBAT_001 used for the quality criteria if the vendor
                    evaluation is carried out in the background
EXIT_RM06LBEW_001 used for the quality criteria when the scores for
                    semi-automatic and automatic subcriteria are
                    determined
EXIT_SAPLMEL0_001 used for the general criteria
The following data is passed on to the function modules:
XLIFNR (Vendor number)
XEKORG (Purchasing organization)
XHKRIT (Main criterion)
XTKRIT (Subcriterion)
XKRTYP (Scoring method)
The function modules then supply the scores in the parameter XBEURT.
Regards,
Edit

Get Tax Code from PO to service entry sheet in ML81N

Hello,
I am looking for a suitable user exit/Badi, which would get the Tax code from Purchase Order to Service Entry Sheet (ML81N). Currently user changing the tax code manually in service number line item (ML81N). Here is the process we are following.
1. Create the PO with service number in ME21N.
2. Goto ML81N and selecting Other POs.
3. enter the PO and Service number . At this stage this line item should pull Tax code form PO. But it is defaulting with some value.
I tried with all ML81N exits and could not find the solution.
Please let me know the suitable Exit /Badi.
Appreciate your suggestions and Points will be rewarded.
Thanks in Advance.
Lakshmi

Hi,
I think maintaining suitable Data Entry Profile will solve your problem. Take help from HR consultant.
SPRO->Cross Application Component->Timesheet->Specific Settings for CATS Classic->Setup Data Entry Profiles.
Regards

To make service entry sheet for multiple line items of the service PO.

Hello MM Gurus,
Please help me for the following
I create a service PO with say 10 line items. Then while doing the service entry sheet the system automatically picks the line item 10 by default. When I try to enter the other items it throws an error" unplanned services cannot be entered"
So how to make a service entry sheet which shall include all the line items of the service PO at the same time.
So if I have 100 items in the PO do we make the service entry sheet 100 times against each item? Is there any seeting/solution on this?
Please help.
Regards,
Prasanna.

Dear,
I have two solution for u.
1) Create different service entry sheet -ML81N for each line item and create single invoice verification for all service entry sheet - MIRO
2) Create service purchase order - ME21N for only one line item.
And include all services in service tab available at item detail level of service purchase order. Enter it's quantity and rate.
Than create one service entry sheet for purchase order.
So you can create one service entry sheet for all line item of services.
Note: - Use option 2 for easy process.
Regards,
Mahesh Wagh.

PROBLEM IN SERVICE ENTRY SHEET

Dear cons
When we create a service purchase order the system automatically takes NO LIMITS. You can check it in item details of delivery tabs. Suppose we entered service of 15 EA in ser. P.o of service tabs. we create service entry sheet (ML81N) by adopting full quantity of p.o by service selection & after that selcting the item Then choose the service.at the time of choosing the service we want to enter the service of 16 EA. Because tolerance is marked NO LIMITS. But the system gives a message quantity exceeds from the p.o quantity. Pl. solve it. What is the meaning of NO limits.PL. SOLVE IT

Hi
In the service PO ,in the services tab in item details you can give the Overfill Tolerance aganist evry service number.Here you can specify a percentage value.So when you are maintaining the service sheet then the system will not allow you to save it if the value of service entry sheet goes above the value given in the purcahse order+% value..For example if in the PO you have given 10 Eur as the value for services and overfill tolerance as 50%.The system will then allow you to save the service entry sheet if only the value you are entering in the service entry sheet is 15 or below.(ie 15=10+50% of 10).
Hope this will help you
Reward if useful
Thanks and Regards
SHYAM.R

Service Entry sheet to be set as Not accepted status

Hi
After flagging the Transfer check box in the Settlement Tab in item details of shipment cost document(VI03), the Purchase order(ME23N) and Service entry sheet(ML81N) are automatically getting generated. PO and Service entry sheet numbers can be seen in Service Procurement tab.
Question 1: When I separetely look into PO, I am unable trace back the flow. I mean, there is no reference of Shipment cost number in PO.
Question 2: I want the service entry sheet to get on hold/not accepted status so that i can add the list of services performed by the Forwarding agent / service agent mentioned in Shipment cost document.
Question 3: I have made Release strategy for Service entry sheet which is properly working when i am accepting the entry sheet manually. But it is not working when the shipment cost document is triggering PO and Service entry sheet automatically. Actually, It should hold the service entry sheet from not being accepted.
Note: This subject is a mix of Transportation (Logistics Execution) and External Service Management (Materials management). The moderator of this forum can take a call on placement of this thread under suitable section.
Thanks
Maruthi Ram
Edited by: MARUTHI RAM on May 26, 2009 9:31 PM
Edited by: MARUTHI RAM on Jun 4, 2009 2:50 AM
Edited by: MARUTHI RAM on Jun 5, 2009 8:29 PM

not solved.

(SERVICE ENTRY SHEET) ML81N

Similar Messages

Maybe you are looking for