Service entry sheet (urgent)

dear all,
i made an PO for service PO with unit of measure AU qty. 1 but in the service tab i added one service with quantity of 1000 with price 1 usd and unit of measure is TO.
10 K D     HANDLING & TRANSPORT OF IRON ORE FINES 1 AU D 02.12.2008 1000 USD 1 AU TR04 2100
then while doing the service entry sheet system throwing me the following error.
PU Ordered quantity exceeded by 1 AU : 2100
Message no. M7022
Diagnosis
The specified stock level or quantity is exceeded by 1 AU.
System Response
If the message is an error message (E), the above is not allowed.
If the message is a warning message (W), the system will allow your input, but the warning is intended to prevent you entering a wrong quantity.
Procedure
In the case of a warning message, check the quantity entered.
In the case of an error message, change the quantity or terminate processing.
Note:
The abbreviations in the short text of this message can have the following values:
BA = batch
OR = order
PL = plant
PR = previous period
PU = purchasing document
RE = reservation
SL = storage location
VC = consignment stock from vendor in storage location
but when i check unlimited in over delivery tolerance then system is allowing me to do SES. and completing the process fully but i dont want to give check of unlimited tolerance.
can any body help me for this issue.
regards,
qsm sap
Edited by: qsm sap on Dec 3, 2008 6:04 AM
Edited by: qsm sap on Dec 3, 2008 7:59 AM
Edited by: qsm sap on Dec 3, 2008 8:23 AM
Edited by: qsm sap on Dec 3, 2008 11:58 AM

i think You would get this error when there are multiple Service entries, but you have not flagged the Unlimited Flag under the Limits Tab in ITem Details.
plz check the delivery tolerance
http://www.helpinfo.com/index.jsp?k2dockey=1021028680438086807&formwassubmitted=true
plz dont use words like U rgent as it block us to post
regards
kunal

Similar Messages

  • URGENT VERY URGENT---------Error in Service Entry Sheet-ML81N

    Dear Experts,
    I am getting a Error msg while creating a Service Entry Sheet by ML81N. It says that " You cannot enter an Unplanned Order". wht to do pls help
    Its urgent
    Thnx
    Sankha.

    yes u have to make the serv entry sheet with rspt to Serv. P.O just go to ML81N here click on create icon, a small box opens here give the p.o no & click on continue.here give all necessary details like desc, valid dates , serv, location, etc then click on serv. sel tab which is at below then all line item which r in Serv. p.o will be picked up.
    Hope this can help
    Reward if useful,
    KM

  • Urgent - Service Entry Sheet

    Dear All,
    Is there any internal assignments for PO & service entry sheets??? because when I create a PO automatically a service entry sheet is also getting generated automatic. So please provide me inputs on the same.
    Thanks & Regards,
    SAP FC

    Hi,
    Yes
    1. ME21N
    2. Give vendor,PO,Pur.Grp.Co.Code,
    3. Account Assignment - K (Cost Center)
    4. Item category - D (Services)
    5. Give Short text (note Do not give material)
    6. Po Qty,Net price, Cur,Plant and Sloc.
    7. Enter - new window opens ie Invoice,here you have to give cost center,and G/l account has to be maintain.
    8. In Item details you give your service text,Qty,Unit of measure(Hr,daily,)gross price
       check & save
       Po created under the number 4500015377
    A service PO can be closed by ticking the "final Invoice" check box in Item details->"Invoice Tab".
    Delivery completed ind is for material POs.
    When your vendor provide service, you will do entry in ML81N w.r.t. PO.You can have “N” number of SES w.r.t. PO.

  • Invoice of service entry sheet

    Hi gurus,
    i have created framework purchase order for service material, account assignment : k and item category: d and took 10 quantity of computers of material to be serviced. when i do service entry sheet with reference to the purchase order and reduce the quantity of material from 10 to 3 and save i get service entry sheet no.
    Now when i do the invoice entry with miro and enter purchase order no the systeem is showing only amount and no quantity when i simulate and save the miro is created.
    can you please guide me where would be the mistake created.
    it is very urgent
    regards

    suresh pawar wrote:
    Hi gurus,
    > i have created framework purchase order for service material, account assignment : k and item category: d and took 10 quantity of computers of material to be serviced. when i do service entry sheet with reference to the purchase order and reduce the quantity of material from 10 to 3 and save i get service entry sheet no.
    > Now when i do the invoice entry with miro and enter purchase order no the systeem is showing only amount and no quantity when i simulate and save the miro is created.
    >
    > can you please guide me where would be the mistake created.
    >
    > it is very urgent
    > regards
    HI,
    How can you create the p.o with combination of item catogory "D" and service material item category "D"  will used with out material  only short text will be allowed.
    check it once.
    Thanking you.

  • Need reasons for blocking Purchase requisition and service entry sheet.

    Hi All,
    I need reasons for blocking service entry sheet and purchase requisition.
    Also want the reasons for reversing the approval of service entry sheet.
    Its urgent ......

    Hi Nilesh,
    It is not possible to block a service entry sheet as such. You could only revoke a service entry sheet. Some of the possible reasons are, you are not satisfied with the quality of service provided by the vendor. Or it could also be due to change in the services to be performed or it could even be as simple as erronous entry of services in the entry sheet.
    However from ERP 2005, it should be possible to return the services by marking the returns indicator.In case of materials, it is possible to put a materials PO on hold. But in case of services, the hold option does not arise as a service cannot be performed/completed till all the approvals are received.
    Hope this answer helps you.

  • How we restrict the TECO fucntion without service entry sheet for PM03 cont

    Dear PM Guru's.
    one of my client asking to restrict the TECO function if there is no cost in order either by external service cost or internal service cost? If user raise an order for one external activity , he not created the service entry sheet against PO and he did TECO of the order, when FI people settles the cost system showing either order is already settled or there is nothing to settle. Please guide me how to restrict the user to do the teco function in order. Its very crucial and urgent for me. if any one have solution please update it immediately.
    regards
    Jalu

    IWO10004 Maintenance order: Customer check for order completion
    Use the above user exit to check the cost for the order. If there is no cost, then give error message.
    You can check tables PMCO and AUFK.
    Also you can use function module PM_WORKORDER_COSTS_LIST to retrieve the actual cost values.

  • Service entry sheet for t.code ml81n

    Hai every one,
    My requirement is like this.
    User should select one line item while adopting from service PO in service entry sheet and save. So that he will get one service entry sheet for one line item. so when he  select more than one line item and tries to save in one service entry sheet the system should give error message and he should not be able to save.
    For this i found one function exit 'EXIT_SAPLMLSP_031'.
    i wrote the code like this.
    *BREAK-POINT.
    tables:esll, rm11p.
    data : serent like esll-extrow,
    serent1 like esll-introw,
           count type i
    data: begin of ix_esll occurs 2000.
             include structure msupdap.
    data:    selkz   like rm11p-selkz.
    data: end of ix_esll.
    *break-point.
    *count = 0.
    **loop at IX_ESLL .
    *if IX_ESLL-selkz = 'X'.
    *count = count + 1.
    *endif.
    *endloop.
    break-point.
    if sy-tcode = 'ML81N'.
    *if sy-index <> 0.
    if sy-srows <> 0.
    esll-extrow <> '0000000010'.
    *if esll-EXTROW = '0000000010'.
    *if ix_esll-extrow <> '0000000010'.
    message e000(38) with 'Select only one line item'.
      endif.
      endif.
    *ENDIF.
    In ML81n we can see the line item start with 10,20 ,30 like that. If i hard code the line number is 10. it will work correctly. if i select the 20 it wont work.
    If user select 30 or 40 how i can do this.
    Plz helpme regarding this. It is very urgent.
    Thanks and Regards,
    Vamsi.

    Hi,
    Just use the following code as it is. If you are facing any problem please let me know.
    data: w_no_of_records Type I.
    CONSTANTS:
          c_pgmvariable(21)  value '(SAPLMLSP)REF_ESLL[]'.
    DATA: BEGIN OF I_REF_ESLL OCCURS 200.
             INCLUDE STRUCTURE UESLL.
    DATA:    KOT_PACKNO LIKE COMSRV-KOT_PACKNO,
             KOT_INTROW LIKE COMSRV-KOT_INTROW,
             CON_PACKNO LIKE COMSRV-CON_PACKNO,
             CON_INTROW LIKE COMSRV-CON_INTROW.
    DATA: END OF I_REF_ESLL.
    FIELD-SYMBOLS: <FC> Type ANY.
    assign (c_pgmvariable) to <FC>.
    I_REF_ESLL[] = <FC>.
    DESCRIBE table I_REF_ESLL Lines w_no_of_records.
    If w_no_of_records NE 0.
       message e000(38) with 'Select only one line item'.
    Endif.
    Regards
    Raju Chitale

  • Vendor evaluation tab in service entry sheet

    Hi All,
    Can any one please help me out to configure the vendor evaluation tab in service entry sheet T code ML81N.  Already done the field setting for service entry sheet and maintained the Purchasing Organization Data in vendor evaluation.
    Regards
    MG

    Hi Guys,
    Thanks for your update. i have refered the above mentioned note, but is it possible to show more than two subcriteria in the vendor evaluation tab in service entry sheet.
    For example i have a criteria like below
    Criteria                               Sub criteria                 Scoring mentod
    Manpower Skill                  Deployment                        C
                                              Competence                       D
                                              Training                              C
    So now my doubt is how can i get all the above three sub criteria in the vendor evalution tab in ML81n. I am getting the first two sub criteria.
    Is there any other way to do it like user exit any enhancement etc.
    A urgent reply shall be highly appriciated.
    Thanks
    MG

  • Error in Posting Service Entry Sheet - FI 311 No Commitment Item in Item 1

    Dear All,
    We need a suggestion/solution for the following problem :-
    Our customer had raised purchase orders for services in may 2010. The following critical entries were made in the purchase order.
    Account Assignment Category was P-Project
    The WBS element was entered as the Accounts Assigment Category was P.
    The user was entering uncoded services. Hence the material group for that service which had G/L a/c tagged to it was entered. But the G/l code was not populated in the purchase order by the system at that time of creation of purchase order and subsequently the user was able to save and release purchase order.
    The user was able to post Service Entry Sheet and generate accounting entries in june 2010.
    Additional service entry sheets are required to be posted for the remaining quantites. The client has urcated the SES process into two parts.
    1. Through T-code ZML81N the end user is able to create and save the SES.
    2. Through T-code ML81N the Head of Department is able to approve and post the SES which results in generating of accounting entries.
    Presently the user is able to create SES with tcode ZML81N. But when the HOD tries to approve and post the ses we get the error.
    FI 311 - No commitement item maintained in Item 0001 in P220 (company code).
    Fund Management is active in this company code and all settings related to Funds Management and FI have been checked by respective consultants.
    The end user is not having any problems in processing SES for current Pos. But he is not able to create SES for the POs created in May, 2010 for which the user has already created and posted more than one SES against the same POs.
    We have already escalated it to SAP.
    Thanks in advance
    Anil Shanbhag

    Hi,
    Use T.code:FS00 and check G/L account 280000 is there in your company code or not.
    If yes, check its nature(type/description,control data , cretae bank/intererst tabs)of G/L
    NOTE: Also check and compare the field selection between Movement type 101 & your G/L account 280000 in SE38 t.code with  Program RM07CUFA
    Regards,
    Biju

  • Prevent auto creation of service entry sheet

    Dear friends,
    I am using maint plan for creating service entry sheets automatically. I am using framework order where I give the validity period. Now when I try to generate service entry sheets through the plans after the end of validity period given in framework order,the system is allowing creation of service entry sheets. Is it possible to prevent a maint plan triggering a service entry sheet if the call date for the service entry sheet to be generated falls outside the validity period given in framework order.
    best regds
    Arun

    Arun,
    This doesn't suprise me...
    I'm not sure if there is a standard solution, but you could do this via user-exit/BADI (see [here|http://www.sapfans.com/forums/viewtopic.php?p=648307] under maintenance plans )
    PeteA
    [www.pjas.com]

  • Purchase order and service entry sheet

    Hi
    Is there a way to prohibit modifications on the position of services purchase order when the service entry sheet and the invoice were already entered for that position?
    Thanks in advance for your help
    Tomas

    hi, thanks for your help, but the problem that i have is when the service entry sheet and the invoice are allready entered, the user change the value of the position and the service tab, so the user can enter services for more amounts. So its produce difference on the purchase order history between the values of LERF (WE) and the value of the purchase position. For example
    Service Purchase order for 100 dollars.
    Tab service: 2 units for 50 dollars
    The user enter one service entry sheet for 50 and the invoice for 50 (lerf and WE= 50)
    Then the user change the position of the purchase order and increase the value to 100 and modifies the service tab to 1 services for 100.
    Then he enter one service for 100 and the corresponding invoice..........so the result is the following:
    Service purchase position: 100
    LERF-WE: 150
    so the purchase order history is inconsistence.
    For that reason i whant to know is there is a wat to prohibit modifications on the position of purchase order
    Thanks in advnace for your help
    Enzo

  • VALUE IN PO HISTORY OF SERVICE ENTRY SHEET EXIST EVEN AFTER DELETION OF SES

    Respected All,
    My client has prepared a down payment request , prepared a service purchase order against that vendor, created service entry sheet.
    Later on he came to know that the qty he has entered is wrong ,so  he reversed all the goods receipt(done 102 Mvt) , deleted the service entry sheet and now trying to create new SES against the same line through ML81N.
    But the Qty column after selection of services is coming blank, i have checked the po history, in that the GR Qty and value is zero and service Qty is zero but service value and down payment column still contains the value, though we have reversed the service entry seet.
    please guide me what to do to reflect the qty part in ML81N again.
    Thanks and Regards
    Abhay Mahodaya

    can you see the material document with reverse movement ( 102 ) ,corresponding to your cancelation of SE sheet in the P.O history tab?
    also check whether the 'actual quantity' in the Service entry extreme right column shows zero.
    check in the deleted SE sheet history tab 'change document' button whether the last row change mentioned is setting deletion indicator

  • How to update sales order number (KAUFN) characteristic in the profitability segment of the PA document created at the time of service entry sheet confirmation, as a result of shipment cost document

    Hi,
    We have a scenario wherein we create shipment cost documents against delivery. As a result of shipments fully transferred, a PO for freight vendor is automatically created and a service entry sheet confirmation happens. As a result of service entry sheet confirmation, we have Financial accounting, Controlling and profitability analysis documents created. We have a requirement wherein we need to have the characteristic “sales order number (KAUFN)” populated in the profitability analysis document created as a result of service entry sheet confirmation.
    Could someone please advice how could this be attained in COPA. Thanks for your help in advance.
    Regards,
    Sandeep

    Hi Ajay,
    Thank you for the quick update.
    The document is updated to COPA through OKB9 settings. The profitability segment is updated with fields like customer, product, company code, plant, sales area data, profit center, etc; however the sales order number is missing.
    Could you please elaborate further how could FI substitution be implemented to call for the FM COPA_PROFITABILITY_SEGMENT through user exit? Are you recommending the substitution through GGB1? What could be the possible validation to call for the user exit to be implemented?
    Regards,
    Sandeep Kulkarni

  • Changing GR/IR clearing account in Service Entry Sheet process

    Hi,
    We are using one Gr/ir clearing account for both Material and Service Entry sheet process.
    Now for clear process we want to create new account for the Service entry sheet.
    We have given blank valuation class for Service entry sheet and it has been assigned to the g/l account.
    After analysing the scenario we had two options.1.  Whether we can change the valuation class
    or 2. we can create new G/l account.
    But i had a doubt will it impact anywhere if i change the valuation class.
    Can anybody advice me??
    Thanks n regards,
    Veena

    Dear Javeed and Sadhashivan,
    Thanks for your answers. Yes we have sort key set on both the accounts and also we have tried to display all the PO relevent fields but unable get through.
    Please note we need PO no line wise on the ledger of adjustment accounts NOT on the GR/IR account.
    1) Goods Delivered but not yet invoiced
    2) Goods Invoiced but not yet Delivered
    Hope I have made my point clear.
    Thanks
    Ayaz

  • Cancelling Material Receipts generated from approved Service Entry Sheets

    Several service entry sheets were entered twice into SAP and approved for Vendor .  Upon approval, material receipt documents were created and because the vendor is ERS, invoices were created and paid.  Manual credit memos have been processed in AP so the vendor has been charged back but the GR/IR GL account won't clear without the material receipt reversals. 
    To properly credit the job and debit the GR/IR GL account for this duplication, reversing material receipt documents need to be created. Anybody knows how to do the correction?
    please advise.

    Hi,
    Please follow the below steps.
    01. First Cancel the Invoice
    02. GO ML81N and in change mode you will get rewoke service entry sheet, a      pop will come for posting dates enter the posting dates. and save . It will change the reverse the GR document created through Service entry. Set deletion indicator if you want.
    Thanks & Regards,
    Sridhar

Maybe you are looking for