Service entry without an entry date/not linked to goods receipt/invoice?

Dear Gurus,
I created a service entry against line 10 of PO. When viewing the service entryu2019s u201CAccept. Datau201D tab, there is a document date and a posting date.
When viewing the u201CHistory tab,u201D the created dated is 01/12/11...
When viewing the POu2019s u201CPurchase Order Historyu201D tab, the Service Entry does not have an entry date Additionally, when I go to the u201CGR/IR Assgtu201D view, the service entry is at the very top of the view But the goods receipt and invoice processing document are at the bottom, grouped together, but without the service entry.
Please help as why is it happeing like this?

Dear Gurus,
I m creating service PO and later on doing service entry sheet w.r.t the PO...in service entry sheet, i m entring entry date, posting date and all other relevant informations...and saving the SES and later on releasing it...
after this, I am going to PO history tab, there i m seeing the SES number but entry date field is missing...
May i know the reason?
Pls help...

Similar Messages

Receiving Services as Materials in order not to perform goods receipt

I am on a project that is implementing SRM in May. The company has decided to upload 15 Vendors for Services and to perform the goods receipts in order to achieve a 3 way match. One of the Vendors (Huge Spend) will not get a goods receipt performed as no one wants to perform the goods receipt (this was just decided yesterday). We will create the shopping cart and SRM PO and pay the invoices in R/3. In order to do this we have to enter the shopping cart as a material in order not to have a goods receipt performed in SRM (as I am told). Has anyone ever experienced this? Is there any problems that we, as a company, may not be aware of Is there someone out there that has experienced this or close to this? Please advise. Thanks

Dear Kimberly
In SRM every implementation requires a backend systems and in any of the Technical scenarios goods receipt can be done in any of the system either in SRM or in R/3.
However we can resrrict the goods receipts not done in SRM by modifying the role in PFCG and remove Confirmation of goods/servies from the role.
This will force the users to do goods receitps in R/3 systems only.
The Leading Po can be created in any of system either in SRM or in R/3.
regards,
Nimish Sheth
NB - Do rewards points for helpful answer.

WM LT01 Source BIN# not FIFO on Good-Receipt-Date, instead on QUANT# ?

Hello,
Encounterd a strange FIFO logic when doing LT01, the PICKING sequence is based on QUANT# instead of the Good-Receipt-Date.
Could anyone please help to advise how to fix the problem ?
PS : YOu may have to give more detail advice as I am not very good in WM.
I could provide details if required.
Thank you.

from http://help.sap.com/erp2005_ehp_03/helpdata/EN/c6/f845874afa11d182b90000e829fbfe/frameset.htm
Strategy F: FIFO (First In, First Out)
Use
With this picking strategy the system proposes the oldest quant in the storage type as the quant that should be transferred.
The system generally calculates the "age" (length of time in storage) of a quant on the basis of the goods receipt posting date from the Inventory Management (IM) application component. The system automatically sets the goods receipt date in the quant and in the transfer requirement for every goods receipt posting in IM. When the transfer order is created, this date is copied over to the quant record of the destination storage bin.
You can accept the goods receipt date that the system sets or you can enter a different date. Regardless of whether the system proposes the goods receipt date or you enter a different date, the date is used to calculate the age of the quant. This date influences the sorting sequence for each material.
Prerequisites
When you define the storage type record to use this strategy, enter f in the Picking strategy field.

Baseline date not getting populated from SRM invoices posted to ECC 6.0

Hi,
We are currently in ECC 6.0. The SRM system is in 4.0. We have this particular problem that the baseline date is not getting populated from the Invoices posted from the SRM. The baseline date is blank and the document is saved.
Did anyone face the same problem??? Can you please refer SAP note 541934 and expand........
Thanks
Aravind
Edited by: Aitipamula Aravind on Aug 10, 2009 5:13 AM

Hello,
Yes, you could check the attached note 541934 and regard the implementation of the field ZFBDT in the invoicing document.
Note 541934 provides a solution how to achieve the MM-customizing for payment baseline dates getting effective for invoices with SRM-origin. This note needs to be applied at your ERP-MM-side in the former plug-in-layer. As described in the note, this is a modification. It's recommended to apply in non-productive system first.
Hope the above infor.are helps for you!
Best Regards,
Gladys xing

Not to update Goods receipt on process order in LIMS system

Dear all,
I am working on SAP-LIMS interface project.
Please help me out with the below requriement:
Release of process order (COR1) in SAP creates lot creation in LIMS (creates an inspection lot in QIWL table which is read by LIMS system to download data from SAP to LIMS).
When we do goods receipt (MB31) against the process order, currently it updates same inspection lot in QIWL table to send the same record for LIMS system again.
We have a requirement not to update on Goods Receipt to LIMS system.
Please let me know if there are any user-exits/BADIs for the same.
I know that goods receipt MB31 runs the FM MB_POST_DOCUMENT in background.
Please let me know if somebody has worked on this requirement.
P.S. - We need the functionality of updating goods receipt on purchase order in LIMS.
Thanks,
Sachin

Hi,
If you post GR in Plant - A, then the stocks in the warehouse will reflect for Plant - A & not in Plant - B.
Although the warehouse is the same, it is linked to the combination of Plant & Storage location. You can check the warehouse stocks using LS26, just specify the warehouse number & material number.
But there is also a concept of planning plant & production plant, so Plant A can be where the planning takes place, while Plant B is where the actual production takes place. In this case, although you produce in Plant B, the GR will be done in Plant A.
Hope the above clarifies.
Regards,
Vivek

Delete button not available for goods receipt when PO has GR-Based IV set

Hi ll,
the delete button for confirmations is greyed out when the PO has the GR-Based IV set, the return delivery button however is available.
There are several goods receipt on the PO some of which have linked invoices but the goods receipt I want to cancel is not linked to an invoice.
I've checked the backend config and it's the same for movement types 102 and 122. Also I can manually post a 102 in the backend.
For PO's without GR-Based IV both the delete and return delivery buttons are available.
Does anyone have any ideas? We are on SRM 4.0.
Cheers
Chris

Hi,
thanks for the response but I don't think this situation is related to backend settings as I can perform a 102 and a 122 against the same PO l;ine directly in R/3.
This appears to be an SRM "feature".
To claifry the situation
PO flagged as GR-Based IV
Purchase Order line has several goods receipts and several invoice receipts matched.
Tryning to cancel a confirmation in SRM for a goods receipt without a matched invoice receipt.
"Delete" button is not available but "Return Delivery" button is available.
In R/3 backend I can post a 102 (delete) or a 122 (return) without any issues.
Config settings are the same for 102 and 122 in the R/3 backend.
Any one any ideas?
Cheers
Chris

2LIS_02_SCL / Getting both Posting dates of goods receipt & invoice receipt at the same time

Hi,
I have created a DSO based on the schedule lines standard extractor 2LIS_02_SCL.
The keys of this DSO are PO Number, PO Item and Schedule Line number.
I have succeed to get some key figures like PO Quantity, GR Quantity and Invoice Receipt Quantity according to the Process Key value.
Furthermore, I'd like to get too the goods receipt date (Process Key = 02,12,22).
In order to do that I wrote a small routine in the transformation rule for my target field which fill it only if the process key is 02, 12 or 22.
The problem is that it doesn't work well because of the invoice records in my source package...
Indeed when there is an invoice in my PSA for a schedule line, my target field (GR date char) is empty (for these schedule lines, last record is Invoice Receipt type). So it means my transformation rule works but is overwritten by an blank value when there is a process key 03,13 or 23 (invoice Receipt type).
Do you have a idea to solve my issue ?
Thank you very much

Hi.
You have to write start or end routines for this scenario, not the field level routine since it gets overwrite with last record values....
overall logic is:
Collect GR date per PO Num, PO Item and PO SCH. Lin num..like you have internal table with PO number, PO Item and PO Sch line number and GR date. First you have to go through source_package or result_package and fill up that temporary internal table
And than again go through source_package or result_package and READ that temporary table and fill GR date for all records of same PO sch. lines ..hope this resolves the issue.
I would prefer end routine if you have posting date in DSO or target structure
this is little bit complex, so you need ABAP skills....

How to link imported Goods REceipt (DTW) to PO

Hi, We are importing our Goods Receipt PO through DTW because the serial numbers are not sequential. In DTW, how do I link the added Goods REceipt to the original PO?
Thank you!
Jane

Hi,
Please check this thread:
http://scn.sap.com/thread/1912409
Thanks & Regards,
Nagarajan

Indicators "goods receipt" "invoice expected" are not set! Bug or feature?

Hi all,
we are using SRM 5.0 classic scenario.
A freetext shopping cart without vendor assignment creates a PR in the backend (4.6C). In this PR the indicators for "goods receipt" and invoice expected" are not set. Is this ab bug or a feature.
In former realeases these indicators are set automatically for the document flow.
What do I have to do to set the indicators automatically in SRM 5.0.
Best regards
Susanne

Hello,
in classic scenario those flags are set according to the account assignment type and the settings in backend transaction OME9. On the one hand these settings can be overruled by BADI(s), on the other hand this behavior has also been noticed due to a malfunction which was corrected with note 1175255
(pls also take into account the corrections for the backend!).
I hope this is a first approach for solving the issue.
BR
Michael Haslinger

PO Profit Center is not coming in Goods Receipt

Hi Gurus,
1. We are creating a PO with Account Assignment WBS and in line item we are able to see the Profit Center and this purchase order Account Assignment Category - Q (Proj. make-to-order).
2. In material master we dont have any Profit Center
3. In WBS we have Profit Center
4. When we do the GR - Profit center is not coming.
Material Account Dr   xxxxx (profit center is updating)
    To GR/IR Account                 xxxxx (There is no profit center)
And when we do the Invoice Receipt
GR/IR Debit xxxxx (profit center is updating)
Vendor Credit    xxxxxx
At the same time when we create the PO with Account Assignment Category -P (Project) we are getting the Profit Center in both line items
Material Account Dr   xxxxx (profit center is updating)
    To GR/IR Account                 xxxxx (profit center is updating).
How Purchase Order Proft Center is determining into Goods Receipt.
Is there any different Rule for Account Assignment Category -P (Project) & Q (Proj. make-to-order)
Thanks
HS

Hi Alex,
Thanks for your reply.
My question is for Account Assignment Category P (Project) Profit Center is updating. But AAC: Q (Project make order) is not updating the Profit center in Goods Receipt.
Account Assignment Category -Q
Material Account Debit (Profit center updating)
GR/IR Account Credit (Profit center not updating)
For Account Assignment Category - P (Projects) for both line items Profit center updating,
Material Account Debit (Profit center updating)
GR/IR Account Credit (Profit centerupdating)
Thanks
HS

Purchase Order: Copy of Deleted Positions not available for Goods Receipt

Hi SAP Gurus,
we've implemented an SRM extended classic scenario with the R/3 as the back end system.
When I create a purchase order with, for instance, 17 positions, if I delete one of them (for instance the number 16) and I copy it I get in my order two positions with the number 16: the first one is deleted and the second one is active. This doesn't happen for the very first positions: if I delete one position and I copy it I get the new one at the end of the list.
The problem is that when I have to create the Goods Receipt, the position copied from the deleted ones are not available!!!
Please, is in there anyone who can help me? Thank you very much!
Giovanni Ottavio Lo Brutto

Check the following SAP Note:
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0001468209

Purchase Order not converting to Goods Receipt Purchase

Since we've upgrade to SAP Business One 8.8 PL12, we are not able to "Copy" Purchase orders to Goods Receipt PO. When we try to do this, we get the following error:
[Microsoft] [SQL Native Client] [SQL Server] Update or insert of view or function u2018OSRIu2019 failed because it contains a derived or constant field. (CINF)
This is even for Non-Serialized Items.
Is there any one with a solution for this?

Check the following SAP Note:
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0001468209

Quantity related Scale pricing not considered during Goods receipt

Hello Group,
First thanks for looking into my issue. I tried to follow the solution in SAP Note 401941 on assessing the right unit price as it relates to the quantity received during Goods receipt, but my ABAP developers are very green at this time and they cannot figure out where to place this code fix and how it would work.
Background on issue.
From quantity of 1 to 99, I want the price to be 4.00 each
From quantity of 100 and above, I want the price to be 3.00 each.
When doing goods receipts for quantities that have not reached 100 yet, it is still assessing 3.00 each. I found the OSS note above that is really not helpful and was wondering if anyone else is using scale pricing and how their GRs are calculated for correct unit price.
Thanks all for your assistance.
Samantha

The scale pricing cannot be used to influence price during goods receipt. Goods Receipt will pick up the price from the purchasing document.
Suppose you want to have that the price be determined based on the quantity received over a period of time, you need to use rebate agreement.
The OSS note mentioned in your question says that you can determine the price based on the schedule line quantity during GR (not quantity at the time of GR). It will not solve your requirement.
Lakshman

Serial Number changes not allowed at Goods receipt level

Hi Gurus,
I have created serial number at the time production order creation. But at the time of goods receipt my user change the serial number manually and save the document. My requirement is system should not allow changing the serial number in goods receipt level.
Example:
Prod. Order: 10001
Qty: 1
Serial No: 20100001.
At the time of goods receipt user change the serial number as 20100003.
Is it possible to restrict the serial number changes at goods receipt level?
Thanks in Advance,
Regards,
S.Babusingh

Hi,
Not in front of the system, but if i remember correctly one of these enhancements has a check on serial numbers,
1. User exit -> MBCF0002
2. BADi -> WORKORDER_GOODSMVT or MB_DOCUMENT_BADI
Check & revert if it meets your need.
Regards,
Vivek

Service Desk with SLA: item data not automatic

Hello all.
I'm trying to setup service desck with contract determination for monitoring SLA (SolMan 7.0 SP 15)
Everything works well, except for item/product determination. I mean, when i check a support message creatde in a satellite system, organizational data are ok, but item's data are blank. Well, i put manually my own product in Item, quantity, press Enter and... that's all: contract data are correctly fullfilled, SLA schema ok, no errors at all.
I'm sure that i missed some basic configuration, but i don't know where... Maybe in the Action Profile of the ABA message? Or in the Item category determination?
Help me!

Hi Michele
Go to SPPFCADM > Select Application DNO_NOTIF >> Define Action Profile and Actions >> Action Profile - SLFN0001_STANDARD_DNO >> Action - SLFN0001_STANDARD_DNO_CRM >> Select the processing type Method Call and choose 'change'icon in Method call settings >>
In the container editor , Choose create >> Maintain Element, Name & Description - maintain as ITEM_PRODUCT_ID, Choose ABAP Dict. Reference , Maintain values - Structure CRMD_ORDERADM_I, Field ORDERED_PROD, choose tab - intial value, enter the product code (Ex.SUPPORT)
enter and save.
This setting will ensure you to determine the product id in the Support message automatically, during your message creation process.
Thanks
Ram

Service entry without an entry date/not linked to goods receipt/invoice?

Similar Messages

Maybe you are looking for