Service error when installing OO4O

I get an error telling me to shut down the service
OracleOra9i_HOMEAgent
when trying to install OO4O in XP.
I can't see anything relating to this in my processes.
Does anyone know how to shut this down?
thanks very much...
Brian....

Fixed it thanks anyway

Similar Messages

  • IPod Service error when installing iTunes 7.3.1

    When I tried to upgrade to iTunes 7.3.1, towards the end of the install it said that it couldn't install iPod Service. I've tried erasing my Temp directory and turning off iTunes Helper when installing, but nothing works. Help!

    Hmmmm. What's the precise text of the message you get mentioning the iPod Service? There's a couple that i'm familiar with, but the way you describe your error makes it sound a bit different from those ones.

  • Oracle Application Server for SLES Linux error when install

    I try install Oracle Application Server Infrastructure (as_linux_x86_portal_wireless_101202) on SLES:
    1. I install orarun package.
    2. Install patch 3167528 - remove entries from the "/etc/services"
    error when install - the OPMN process manager failed to start.
    I read opmn/logs: can't load shared library libdb.so.2...
    I check /usr/bin/libdb.so and found libdb-4.3.so
    I create simbolik link libdb.so.2 to libdb-4.3.so and retry install oracle Application Server Infrastructure, but have this error again.
    I try install Oracle Application Server Infrastructure on several linux distribs, but have this error again adn again..
    how I can fix this error? help mee pls..

    I think that you need to download a patch for that error, this patch is just a library that you need create a link to it.
    Follow this Metalink Note      790943.1
    Greetings

  • Getting error when installing CR XI R2 Service Pack 5

    I am getting an error when installing CR XI R2 SP5 (cabinet file m148.cab missing or corrupt). I am downloading it from the Downloads section of the SAP Community Network.
    Does anyone know where I can get another copy of this service pack?

    Hi
    If you are using Windows 2000 SP4 then install the "Update Rollup 1 for Windows 2000 SP4 (KB891861)" should resolve the error message for missing cabinet file when installing SP4 on Windows 2000, as stated in Release Notes of SP4.
    Below is the link to download the Update Rollup 1 for Windows 2000 SP4 (KB891861):
    http://www.microsoft.com/downloads/details.aspx?FamilyID=B54730CF-8850-4531-B52B-BF28B324C662&displaylang=en  and http://support.microsoft.com/?kbid=891861
    Then install SP5 for Crystal Report XI R2.
    Hope this helps!!
    Regards
    Sourashree

  • 11gR2 Error when installing a database and schema

    I have install 11gR2 on my laptop with window 7 4gb ram 500gb hard drive
    I getting this error
    ORA-01503: CREATE Controlfile / Failed
    and
    ORA-01158: Database already mounted
    i need to set up a database a 3 different schema
    because i am doing a install of Hyperion Share service, Essbase and Planning
    Please advise

    Pl do not post duplicate threads - 11gR2 Error when installing a database essbase on install of 11.1.2.1
    Your original thread was moved to the Essbase forums since this is Essbase related
    Srini

  • NW04 WebAs J2EE Full Inst. Issue: CJS-20019  Error when installing..

    I've run into this problem on step 26 of installation:
    <i>ERROR 2006-11-25 22:58:29
    CJS-20019  Error when installing temporary license. DIAGNOSIS: External systems are not available. SOLUTION: Check connection to DB and messaging service.
    </i>
    Once in a lifetime, the solution is the right one (it was for me at least): <b>I went to MMC and started my brand new J2E instance, then hit "Retry", and installation happily came to the end</b>.
    Cheers,
    Alex

    Hi
    Check the Pre requisite from here
    https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
    Cheers
    Jawahar Govindaraj

  • Keep getting sync service error when trying to connect my iphone 5S.

    Keep getting sync service error when trying to connect my iphone 5S. It freezes itunes and I can't do anything else. I see that there is an update for my phone and I need to back up, upload new apps, etc before installing. I plug my phone in and get this error every time. I am using a Win 7 SP1

    Howdy Susie48825,
    It sounds like you are getting an error that mentions the sync services when you connect your phone to your computer and so you cannot sync your device. I would use the troubleshooting from the following article that  mentions an error regardign the sync services named:
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    http://support.apple.com/kb/ts2690
    Start with these steps:
    1. Check that iTunes is up-to-date
    Ensure that you have updated to the latest version of iTunes.
    2. Reset Sync History
    Resetting your Sync History is a simple step which may resolve some syncing issues. If this works, iTunes will prompt to Merge or Replace the information on your device when you next attempt to sync. To reset your Sync History:
    Disconnect your device.
    Open iTunes.
    From the Edit menu, choose Preferences.
    Click the Devices tab.
    Click the Reset Sync History button, and then reconnect your device.
    If this resolves the issue, and you know all of your contacts, calendars, bookmarks and notes are on your computer:
    Reset the Sync History again using the steps above.
    Select the device in iTunes and click the Info tab.
    Scroll down to the Advanced section, and under "Replace information on this iPhone/iPad/iPod touch" select Contacts or Calendars.
    Click Apply.
    If the issue persists, and you know all your contacts, calendars, bookmarks and notes are on your iPhone, iPad, or iPod touch:
    Remove all of the contact and calendar information from Outlook.
    Select the device in iTunes and click the Info tab.
    Scroll down to the Advanced section, and under "Replace information on this iPhone/iPad/iPod touch" make sure Contacts and Calendars are not selected.
    Click Apply.
    There are additional steps to use in the article if needed, but these will get you started.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Root.sh failed throws error when installing Oracle Grid Infrastructure 11.2

    Hi,
    root.sh failed with the following error when installing / configuring the oracle grid infrastructure version 11.2.0.1 for standalone on RHEL 6
    Now product-specific root actions will be performed.
    2011-10-10 11:46:55: Checking for super user privileges
    2011-10-10 11:46:55: User has super user privileges
    2011-10-10 11:46:55: Parsing the host name
    Using configuration parameter file: /apps/opt/oracle_infra/crs/install/crsconfig_params
    Creating trace directory
    LOCAL ADD MODE
    Creating OCR keys for user 'oracle', privgrp 'oinstall'..
    Operation successful.
    CRS-4664: Node vmhost1 successfully pinned.
    Adding daemon to inittab
    CRS-4124: Oracle High Availability Services startup failed.
    CRS-4000: Command Start failed, or completed with errors.
    ohasd failed to start: Inappropriate ioctl for device
    ohasd failed to start: Inappropriate ioctl for device at /apps/opt/oracle_infra/crs/install/roothas.pl line 296.
    I followed the steps / solution provided in the ID 1069182.1. But no use.
    Are there any workaround?
    Thanks
    -KarthicK
    Edited by: user11984375 on Oct 10, 2011 7:06 AM

    Check the logfiles under $GRID_HOME/log/<node_name>/cssd/
    I had seen the same problem and the following resolved the problem for me.
    [root@rac1 ~]# rm -f /usr/tmp/.oracle/* /tmp/.oracle/* /var/tmp/.oracle/*
    [root@rac1 ~]# > $ORA_CRS_HOME/log/<node_name>/cssd/<node_name>.pid
    HTH,
    Raj Mareddi
    http://www.freeoraclehelp.com

  • Hardlock error when installing in upgraded PC

    We have version 7.2 of DIAdem and get a hardlock error when installing on an upgrade laptop running Windows 2000.

    Hello
    I am having a Hardlock E-Y-E AHIZC TE9000 External Service, 2117.0102 Ver No 1 but when i install the driver and Program of Hardlock it says that CVIRTE.dll not found, in past it is working fine but when i upgrade my windows it is giving an error
    please help
    thanks

  • Error when install Infrastructure 10g 10.1.2 in Windows2000 server

    My environment:
    RDBMS Version: 10.1.0.3.1
    Operating System and Version: Windows2000 SP4
    Product (i.e., OAS, IAS, etc): 10g AS Release 2
    Product Version: 10.1.2
    JDK Version: 1.4
    I have the folowing error when installing the Infrastructure (in the stage of SSO Configure Assistant):
    Default Subscriber GUID: E0575BDE015C411CAD99BDEF85F79029
    Subscriber Naming attribute: dc
    Default Subscriber Name: server01
    *** Resetting user DN and GUID information ...***
    Done....
    PL/SQL procedure successfully completed.
    No errors.
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.3.1 - Production
    With the Partitioning, Real Application Clusters, OLAP and Data Mining options
    NLS_LANG character set = WE8MSWIN1252
    NLS_LANG param = AMERICAN_AMERICA.WE8MSWIN1252
    ERROR : Exception while configing SSO DAD :
    oracle.ias.repository.schema.SchemaException: Unable to establish connection to the Oracle Internet Directory Server ldap://myserver.domain.com:3060/. Base Exception : javax.naming.CommunicationException: Request: 1 cancelled
    at oracle.ias.repository.directory.DirectoryReader.connect(DirectoryReader.java:124)
    at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:523)
    Please advice.
    Thanks
    Trung

    I don't know much about the 10g Releases yet but I had the same error with 9.0.2.3. The problem is that OID isn't available when it needs to be.
    When you get the error, start OID using the command line then try running the config assistant again.
    Hope this helps
    Alex

  • TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    Is that an error 2 message?
    If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • ?I am getting an error when installing on my dell inspiron with latest updates for drivers.  Error 1406.  I have the problem with Scan Snap software and a full version of reader.

    ?I am getting an error when installing on my dell inspiron with latest updates for drivers.  Error 1406.  I have the problem with Scan Snap software and a full version of reader.

    Error 1402 | Error 1406 | Acrobat, Reader

  • What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?!

    Hello,
    My computer was working perfectly with Win7 for about 2years until I formatted on monday to clean a little bit my drives ... Since then I'm unable to install windows again. I have the 0x80070570 error.
    The complete error message is:
    Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code:0x80070570.
    What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?! These versions are full from MSDN.
    What I did already:
    check my RAM (16go gskill)
    remove unnecessary hard drives
    replace my "old" SSD with a clean new one
    remove my sound cards
    remove the mouse and use only keyboard
    reset the BIOS
    check every LED on the motherboard (asus sabertooth z77) and there is no problem
    What are the problems?
    Thanks,
    Adrien.

    Hi,
    If all images cannot be installed, we have a reason to suspect the hardware cause.
    If you use two memory slots to get 16G RAM, I suggest you test with just one (8G) to check the result.
    Alex Zhao
    TechNet Community Support

  • Update Operation Fatal Error when installing Technical Preview Build 10041 Upgrade

    I posted this in the Microsoft Community forums and was redirected here.
    Below is the original post (URL: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/update-operation-fatal-error-when-installing/6eaff1b9-0223-4357-afc8-884382590e82 )
    Hello,
    In trying to perform an upgrade install of the Windows 10 Technical Preview Build 10041 (as is the latest available for direct download as of my writing), I am running into a problem I cannot find mention of anywhere else on the web.
    I fall into two categories with regards to this build: A) Product tester who actually needs to test application performance under Windows 10 on bare metal, B) Semi-crazy techie who loves using (usable) beta software as his primary environment ;)
    so it is rather important to me that I get this working on my machine in some non-virtualized respect. I am reluctant to do a full/fresh install if installation problems are happening, because my Windows 8 product key has been f***ed up from the
    start (likely some random database corruption) and I've had to utilize phone support to get around an "unknown error" the last two times I've had to use it. So, for fear of that key completely crapping out on me, I don't want to move to Win10 unless
    I'm confident it will install and I can stick with it (for better or worse) through the end. Problems within the Preview after I install it I can deal with.
    So, I first tried to install the Preview through the standard Windows Update method. The installer took about 7 hours (but from reading lots of internet discussions, stupidly long install times in that range seem to be a common problem with
    this builds separate from it actually failing). During the reboot between the "Setting up Devices" (Or is it Setting up Drivers? I forget) and "Taking Care of a Few More Things" (Again, possibly paraphrased), for about a split second, underneath
    the Windows logo and throbber, some error like this appeared:
    Fatal Error Performing Update Operation # of ##: ERROR CODE
    It only appeared for a fraction of a second, and I had no chance of reading the precise numbers or error.
    However, the installer then seemed to continue, and went until the main circle was at 100%. As soon as 100% hit, however, the screen went black for something like 30min. Then, I briefly saw "Attempting to recover installation" before "Restoring
    your previous version of Windows." And I was, quite impressively considering how far along that installer was, back in Windows 8.1 completely unharmed.
    I tried again by burning an ISO and doing a disc upgrade install. I let that one run overnight and was asleep for the error, but I was back in Win8.1 in the morning, so I can only assume a similar thing happened there.
    As for my system specs, I'm running on a MacBook Pro 9,1 under Boot Camp. I am upgrading from Windows 8.1.2 Pro with Media Center. I have found other online accounts of people quite successfully installing Windows 10 on Macs, so that isn't the issue.
    Does anyone have any clue as to what this error might have been/be, and how I might fix it? Or at least have it on good authority that a fresh installation would be unaffected (meaning it's software-related)? If not, I can try installing to a VHD,
    which would at least let me product test on bare metal, but wouldn't have the harddrive space to be my daily driver and would probably only get used occasionally.
    Thanks in advance to anyone who can help!
    So far, I have the yet-to-be-tried idea of a clean boot prior to installation.
    If anyone here has any more specific ideas, lemme hear 'em.
    Thanks!

    To the individual who proposed this as an answer to my problem: It's not even applicable. I specifically stated that I was trying to avoid doing a clean installation (at least without knowing more about the problem at hand). An answer saying to do the thing
    you're trying to avoid doing is not an answer. You can see my last reply for the current status of this issue. 6-8 hour blocks of time in which I can't use my computer (as is required to install build 10041) aren't super common for me, but I haven't abandoned
    this thread. There have simply been no more updates. If your motivation as a mod was that you simply don't like there being unanswered threads on this forum, then perhaps you could attempt to contribute rather than arbitrarily marking the first reply as an
    answer.
    I will continue to update this thread as I try new things and get more information.
    Thank you.

  • Errors when installing Oracle Client 10.2.0.2.0 on zLinux (Red Hat)

    I am receiving errors when installing Oracle Client 10.2.0.2.0 (Administrator) on zLinux. During the install I receive two notifications for File Not Found when the installer tries to create the link for lib32/libclntsh.so.10.1. I hit ignore on the pop-ups and the install completes. The Oracle Net Configuration Assistant then fails to launch with the following error:
    Output generated from configuration assistant "Oracle Net Configuration Assistant":
    Command = /opt/oracle/product/10.2.0/db_1/bin/netca /orahome /opt/oracle/product/10.2.0/db_1 /orahnam Oracle_home /instype custom /inscomp client,oraclenet,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /opt/oracle/product/10.2.0/db_1/network/install/netca_clt.rsp
    UnsatisfiedLinkError exception loading native library: njni10
    Configuration assistant "Oracle Net Configuration Assistant" failed
    The "/opt/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
    I have seen multiple threads relating to very similar errors, but none of the fixes that were suggested have worked. I have double checked the required Red Hat packages and made sure they were all installed on the server. All of the prerequisite checks for the installer are successful. Any assistance would be of most helpful!

    Worked with my Linux system admin and figured out that we were indeed missing some packages. There are 390 and 390x rpm's for Red Hat on System Z, i.e. 64 bit and 32 bit versions. Since we are running a 64 bit os some of those 32 bit packages did not get installed. Since our roles are split up, I am kind of blind as to the OS setup so I was not able to catch the problem. It is truly puzzling as to why Oracle would need 32 bit packages even though Oracle client is 64 bit. Regardless, after adding the 32 bit rpm's the installer was able to perform the linking operation that was failing, and the network configuration script ran successfully.

Maybe you are looking for