Service failure on Shared Services server

We are using HFM 11.1.1.3.500. I recently tried to log-in to the shared services test server that hasn't been used for a number of months. I immediately get the error *"Internet Explorer could not connect to hou2frs03:28080"* . On investigating, I find the following error in the application event log on the SS server: *"Cannot start service HyS9BPMA_NetJNIBridge...The service did not respond to the start or control request in a timely fashion"* After rebooting all the HFM test servers, I again cannot connect and get the same error in the event log.
Edited by: user7976212 on Apr 20, 2012 9:28 AM
Edited by: user7976212 on Apr 20, 2012 9:30 AM

the netjni bridge message is relating to the EPMA component not starting up correctly.
it is not related to shared services not starting.
you need to look at the shared services / foundation services log files to understand why shared services didnt start.
possibly if you haven't used the environment for a while and now it is not working, you may have database usernames/passwords in your oracle database which are set to expire after a certain period of time. it would be a good start to verify with your oracle DBA that all the usernames / schema names for the configured hyperion products in the oracle database are not set with a password expiry, and if so, ask for them to be unlocked again, and then restart the hyperion services. if the DBA insists to change the passwords you may have difficulties to reconfigure the hyperion components with the new passwords, so unlocking or removing the expiry restriction is the best step. but that may not be the problem, it depends what you find in the log files.
you can use the ziplogs utility to gather up all the logs to submit them to a support ticket if you can't debug them yourself. check out the epm installation and troubleshooting guide (pdf document) on the oracle documentation page as a first step.

Similar Messages

Error while starting the shared service server

Hi john,
I am getting the following error while starting the shared service server.
*25 Jul 2009 10:26:39 - org.apache.slide.common.Domain - ERROR - Unable to migrate hub groups to css*
So shared service console is not starting.
Please tell me the solution for it.
Thanks
Edited by: user11358816 on Jul 24, 2009 10:06 PM
Edited by: user11358816 on Jul 24, 2009 10:09 PM

Hi John,
Yes,It was working earlier.
When I have added NTLM authentication for FDM I am getting that error,but instead of that if
I am adding the authentication provider as LDAP(CSS) I am not getting that error.
So finally i have added only one authentication provider and that is LDAP(CSS).
I fallowed ur document for integrating the FDM application with planning application.(http://john-goodwin.blogspot.com/2008/07/planning-v11-drill-back.html )
For the global logon information I have given admin and password , which I have given while adding the LDAP authentication (CSS).
I am getting machine profile missing error when i clicked on the dimension and the target dimension test box contain connection failed.
Can u suggest me where am I wrong?
Thanks
Edited by: user11358816 on Jul 26, 2009 9:42 PM

Essbase Product Existence Check Fails against the Shared Services Server

Hello Everyone,
I am a new to Essbase
When I am launching the EAS web console and trying to log in, its giving me an error saying "Could not connect to Administration Server".
I looked in ESSBASE log file its showing an error 1051429 : "Essbase Product Existence Check Fails against the Shared Services Server with Error []"
This error actually started when I copied an Essbase Application from one of my computers to another computer. All I simply did is copied the application folder into "app" folder. I am not sure if migration
is possible just by copying and pasting the application folders. I am not sure if doing this messed up security with shared services. Also under c:\hyperion\essbase folder I see another text file named "SharedServices_Security_Client".
Its log for today is below:
2011-11-03 19:36:15,375 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 19:36:15,531 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 19:36:15,531 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 19:36:15,531 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2011-11-03 19:36:18,531 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 19:36:45,531 ERROR [main] 20:1092:Failed to initialize EPM System registry. [Root Cause: hyperion.jdbc.base.BaseSQLException: [Hyperion][SQLServer JDBC Driver]Error establishing socket to host and port: chandan:1433. Reason: Connection refused: connect ] com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 19:36:45,531 ERROR [main] Arguments: param1={}, param2=null, param3=C:\Hyperion\logs\essbase\, com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 19:36:45,531 INFO [main] CSS system intialization failed. : [44156 ms] com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 19:44:14,765 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 19:44:14,781 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 19:44:14,781 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 19:44:14,781 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2011-11-03 19:44:14,828 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 19:44:16,265 INFO [main] Got Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 19:44:16,796 INFO [main] Got hub location from Registry:http://chandan:28080 com.hyperion.css.registry.RegistryManager.getHubLocationFromRegistry(Unknown Source)
2011-11-03 19:44:16,953 INFO [main] Got native directory location from Registry:chandan:28089 com.hyperion.css.registry.RegistryManager.getNativeProviderLocationFromRegistry(Unknown Source)
2011-11-03 19:44:16,953 INFO [main] URL constructed out of values in Registry database:ldap://chandan:28089/dc=css,dc=hyperion,dc=com com.hyperion.css.common.configuration.CSSConfigurationImplXML.initConfiguration(Unknown Source)
2011-11-03 20:02:47,687 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:02:47,859 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:02:47,859 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:02:47,859 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2011-11-03 20:02:48,328 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:03:08,921 ERROR [main] 20:1092:Failed to initialize EPM System registry. [Root Cause: hyperion.jdbc.base.BaseSQLException: [Hyperion][SQLServer JDBC Driver]Error establishing socket to host and port: chandan:1433. Reason: Connection refused: connect ] com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:03:08,921 ERROR [main] Arguments: param1={}, param2=null, param3=C:\Hyperion\logs\essbase\, com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:03:08,921 INFO [main] CSS system intialization failed. : [63140 ms] com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:05:37,343 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:05:37,343 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:05:37,343 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:05:37,343 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2011-11-03 20:05:37,390 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:05:49,875 ERROR [main] 20:1092:Failed to initialize EPM System registry. [Root Cause: hyperion.jdbc.base.BaseSQLException: [Hyperion][SQLServer JDBC Driver]Error establishing socket to host and port: chandan:1433. Reason: Connection refused: connect ] com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:05:49,875 ERROR [main] Arguments: param1={}, param2=null, param3=C:\Hyperion\logs\essbase\, com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:05:49,875 INFO [main] CSS system intialization failed. : [12625 ms] com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:06:42,859 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:06:42,859 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:06:42,859 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:06:42,859 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2011-11-03 20:06:42,890 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:06:45,359 INFO [main] Got Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:06:47,218 INFO [main] Got hub location from Registry:http://chandan:28080 com.hyperion.css.registry.RegistryManager.getHubLocationFromRegistry(Unknown Source)
2011-11-03 20:06:48,250 INFO [main] Got native directory location from Registry:chandan:28089 com.hyperion.css.registry.RegistryManager.getNativeProviderLocationFromRegistry(Unknown Source)
2011-11-03 20:06:48,265 INFO [main] URL constructed out of values in Registry database:ldap://chandan:28089/dc=css,dc=hyperion,dc=com com.hyperion.css.common.configuration.CSSConfigurationImplXML.initConfiguration(Unknown Source)
2011-11-03 20:07:17,359 ERROR [main] 80:6007:Failed to load SAP certificate from keystore at SAP.keystore. Ignore if SAP provider is not configured.[Root Cause: Invalid keystore format ] com.hyperion.css.SAPSecurity.loadSAPCertificate(Unknown Source)
2011-11-03 20:10:12,937 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:10:12,937 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:10:12,937 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:10:12,937 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2011-11-03 20:10:13,000 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:10:14,265 INFO [main] Got Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:10:14,671 INFO [main] Got hub location from Registry:http://chandan:28080 com.hyperion.css.registry.RegistryManager.getHubLocationFromRegistry(Unknown Source)
2011-11-03 20:10:14,812 INFO [main] Got native directory location from Registry:chandan:28089 com.hyperion.css.registry.RegistryManager.getNativeProviderLocationFromRegistry(Unknown Source)
2011-11-03 20:10:14,812 INFO [main] URL constructed out of values in Registry database:ldap://chandan:28089/dc=css,dc=hyperion,dc=com com.hyperion.css.common.configuration.CSSConfigurationImplXML.initConfiguration(Unknown Source)
2011-11-03 20:10:15,234 ERROR [main] 80:6007:Failed to load SAP certificate from keystore at SAP.keystore. Ignore if SAP provider is not configured.[Root Cause: Invalid keystore format ] com.hyperion.css.SAPSecurity.loadSAPCertificate(Unknown Source)
I dont know how to resolve this.
Please Help
Thank you

From the log
Error establishing socket to host and port: chandan:1433. Reason: Connection refused: connect
The SQL server itself is not running or TCP/IP is disabled. That can be confirmed by runing netstat and see it is listed there.
Then run telnet chandan 1433 and see it can connect
To enable the TCP refer to this link
Re: error establishing socket to host and port: EPM11:1433

BPC 5.1 and Reporting Services on Shared, Corporate Server

We are implementing BPC 5.1 and want to integrate with Reporting Services on a shared, corporate server rather than installing on BPC app/web server. The reason is to minimize number of Reporting Services installations corporate wide. This has led to a number of challenges and questions, which I hope someone can assist with.
1. What level of access is needed by the three BPC service accounts to Reporting Services, during install and ongoing?
2. Can BPC be configured to point to a specific Reporting Services sub-directory, rather than having to browse the whole Reporting Services root?
3. Is there any documentation on BPC and Reporting Services?
Thank you. Nancy

You know there are 3 types of users who assigned to SysAdmin, Admin and user. Your SysAdmin user must have administrator rights of your corporate reporting server. Or that user must be user of "Content Manager" role in reporting service. Otherwise, you will get many errors by end of certain function of Admin console such as process security or process application.
And BPC is designed to use a reporting service exclusively. It is not designed to use a particular folder other than root.
I do not have idea about documents regarding reporting service of BPC.

Configuration of 2 Essbase Servers on one Shared Services Server

Hi,
Components Installed:
Essbase Server and Shared Services on 1st Server
Workspace, HFR and Web Analysis Installed on 2nd server. I have configured them and everything is working fine. No issues with this environment.
Requirement:
There is a Essbase server installed on Server 3. Its a Standalone. We want to make use of the Application created here and its security(groups etc) for creating reports through Workspace.
Question: Can I configure this Essabase server to the Shared Services which sits on Server1 (which already configured with Essbase already). If it is, are there any risks that we need to consider here.
Please advise me on this.
Thanks, UB

Thank you so much for your quick solution.
Please correct me If I am wrong here.
1) I need to run the configuration Utility on Server3 and give the same details used for Essbase in Server1. or
Is it ok if I run the Register with Shared services through Essbase Console on Server3 and point to the Shared Services server. I think by doing this, one more Essbase Node created in the Shared Services and the security on Essbase Server 3 can be utilized for generating Reports from Workspace.
Please advice John..
Regards, UB

Urgent: Load balance the shared services server

Hello Experts,
One of my customer would like to know that is there a way to load balance the shared services server i.e., Register one essbase server with more than one Shared services server, so that if one shared services fails the other can authenticate the logins for the essbase server.
Also, referred the following weblink for 11x, Table 3. EPM System High Availability and Load Balancing Matrix
http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_high_avail_11111/frameset.htm?ch01s04.html
Do we have any docs for version 9x?
Environment:
Essbase 9.3.1.3.00
OS : IBM AIX on POWER Systems (64-bit) 5.3
Any suggestions would be of great help. Thanks in advance.
Regards,
Sonal

I would not attempt any changes until 9.3.1 service fix #16 is released.
Oracle is back-porting clusterware support to with service fix # 16.
HSS 9.3.1sf 16 "active passive failover cluster with Oracle Clusterware 11g, for hss web app and openldap"
Based on the Oracle escalated support resources I have been in touch with solutions are not supported. Please realize this is not load-balancing and is fail-over support only.
To my knowledge there is not a "active-active" 9.3.1 Shared Services that is supported by Oracle.
You can read more about an active-passive fail-over at: http://www.oracle.com/technology/products/bi/pdf/epm-hss-high-avail-windows-whitepaper.pdf
They are supposed to release a 9.3.1 white paper once service fix #16 is fully released and has been client tested.
Regards,
John

Service Manager data warehouse SQL Reporting Services server is currently unavailable

I keep getting this error when I launch my SCSM Console. Take a look at the event log > operation manager and saw this error message below.
Tried to google around but unable to find any solution to it. Anybody can enlighten me on this issue that I am encountering? Thanks
Cannot connect to SQL Reporting Services Server. Message= An unexpected error occured while connecting to SQL Reporting Services server: System.Net.WebException: The request failed with HTTP status 404: Not Found.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.EnterpriseManagement.Reporting.ReportingService.ReportingService2005.FindItems(String Folder, BooleanOperatorEnum BooleanOperator, SearchCondition[] Conditions)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String searchPath, IList`1 criteria, Boolean And)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String itemPath)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItem(String itemPath, ItemTypeEnum[] desiredTypes)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.GetFolder(String path)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReportingGroup.Initialize()
at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath, NetworkCredential credentials)
at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath)
at Microsoft.EnterpriseManagement.UI.SdkDataAccess.ManagementGroupServerSession.TryConnectToReportingManagementGroup() Remediation = Please contact your Administrator.
Jeron

Hi,
This may occur when there is a mismatch between the Report Server URL entered on the SSRS Server Location window for the Report Deployment Wizard and the SSRS Web Service Virtual Directory for the Reporting
Services Configuration Manager.
Use the following steps to resolve the issue:
Launch the Reporting Services Configuration Manager on the server hosting SSRS
Select Web Service URL
Copy the value entered in the Virtual Directory textbox
Paste it after the last forward slash in the Report Server URL textbox in the Report Deployment Wizard
Continue on with the deployment
In addition, we may need to check you default web server IP is 'all unassigned', and ping the machine and see what default ip it has assigned.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Reporting Services server cannot connect

Hi,
I am trying to install the SAP BPC MS version and so far been hit with many issues. The latest issue is that the installer cannot connect to the Reporting Services server, in which from the installation documentation this should come as standard with MSSQL.
Any idea how to activate this manually?
Thanks.

Hi,
In that case, I believe, the reporting service was not installed. When you are installing SQL server, you need to check the reporting services from the list. If thats not selected, then it wont be installed.
I guess, you have to run the installation once again. While doing the installation, please check the required services from the list, including reporting services.
Hope this helps.

Reporting Services Server cannot connect to the DPM database. ( dpm 2010 )

Reporting Services Server cannot connect to the DPM database.
To repair the configuration, follow steps for repairing DPM from DPM Setup Help.
ID: 3001
i can not try the Recommended action from error codes catalog because i did not found Change reporting
password

Hi,
We have had several customers report this after installing DPM 2012 R2.
To get past the below error while scheduling reports to be mailed.
Reporting Services Server cannot connect to the DPM database.
To repair the configuration, follow steps for repairing DPM from DPM Setup Help.
ID: 3001
Perform the following steps as necessary:
1. Created a new local group called "DPMDBReaders$<DPMServerName>"
2. Created a new user called, "DPMR$<DPMServerName>" and added this user to DPMDBReader group that we created on step 1.
3. Open SQL management studio and add the DPMDBReaders$<DPMServerName group to Logins under Security in SQL Management Studio.
4. Modify the properties and under General – change the default database to the current DPMDB name.
5. Under User Mapping – select the current DPMDB name and check the db_datareader checkbox.
6. In SQL Management Studio, navigate to the Databases > DPMDB > Security > Users > and select the DPMDBReaders$<DPMServerName>" group.
Right-click the DPMDBReaders$<DPMServerName>" group and select properties. Under the
Securables section, click on Search. On the add objects dialog, click OK.
On the Select Objects dialog, click the Objects type, then check the
stored procedure checkbox. Browse and add the following two stored procedures
“Prc_MOM_Heartbeat_Get” and “prc_MOM_ProductionServer_Get”.    Grant the Execute permission for both of the stored procedures added.
7. In SQL Reporting Services Configuration manager, under Report Manager URL - click on the link to open the portal (http://localhost/Reports)
      i. Click on the DPMReoprts_GUID to open the DPM reports.
      ii. Click on the DPMReporterDataSource
      iii. On the poperties page, enabled "Credentials stored securely in the report server" on DPMReporterDataSource configuration page and added “DPMR$<DPMServerName>” user account that we created in step 2.
      iv. tick "Use as Windows credentials when connecting to the data source."
      v.   Click ‘Test connection’ on the same page to verify whether it can connect successfully.
8. In SQL Reporting configuration manager - change the Service Account to use build-in account: Network Service
9. Reboot the DPM Server.
10. You should then be able to schedule e-mailed reports.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

DPM 2012 R2 Rollup 1 x64.. cant save scheduled report.. gives error: "Reporting services server cannot connect to the dpm database"

The error also has "to repair the configuration, follow steps for repairing dpm from DPM setup help ID: 3001
I tried the solution outlined here:
http://social.technet.microsoft.com/Forums/en-US/8be919ee-f358-47a4-9cc3-d23eb05d3f18/system-center-2012-r2-dpm-smtp-issue-reporting-services-server-cannot-connect-to-the-dpm?forum=dataprotectionmanager
and also the graphical depiction here: http://www.ms4u.info/2014/01/reporting-services-server-cannot.html
I tried these steps, but everytime i try to change it, it tells me:
"The permissions granted to user 'domain\userid' are insufficient for performing this action rsaccessdenied..
Nothing seems to work..
I thought if i went into sql management studio and made sure my userid had admin rights to the db it would work.. but i cant change it there (via integrated security).. i believe i need to login as SA, but i dont recall the password for SA, though it appears
i can change the SA password from within sql management studio.. i'm unsure if doing so will break DPM though or is even needed to fix the reporting integration issue..
Any thoughts on this?
Thanks
Tech, the Universe, Everything: http://tech-stew.com

Using:
data source="servername\MSDPM2012";persist security info=False;initial catalog=DPMDB
I used the domain sqlservice account and test connection was ok.
However.. accessing reports still crashes in the MMC
Tech, the Universe, Everything: http://tech-stew.com
When i recreated the db.. i called it Reporting2 or similiar..
Then the reports folder i created called "Reports Folder"
Then datasource name "reports datasource"
The issue here is that the DPM reports in the reporting web interface are gone, since this is a new DB.. how do i redeploy them
Tech, the Universe, Everything: http://tech-stew.com
i went back into the sql reporting services area.. hit change db.. chose the original .. then back to the url.. went to the OLD reporting services folder and datasource.. added the connect string and now reporting area works.. so does scheduling..
Problem now solved
Tech, the Universe, Everything: http://tech-stew.com
Oops spoke too soon.. the first time i set it to do "status" as a schedule.. it seemed to work (clicked ok, no error).. went back and added an email notification..
Now i'm getting.. "an error occurred causing the reporting job to fail" "system files may be corrupt".
Seems to only occur if i try to add the email address portion
Tech, the Universe, Everything: http://tech-stew.com
rechecked the datasource.. i think there was an error in the connect string.. now everything seems to be working.. email notifications and all.
Tech, the Universe, Everything: http://tech-stew.com

Opened a SSAS project through connecting to analysis service server.. now need to put into source control

hi there:
I've connected to a SSAS project using connecting to analysis service server ... After a few modifications, I'd like to save it under a different name and eventually get put into the source control...
Can someone tell me how to do that?
thanks
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --

Hi Cat_ca,
In your scenario, you can create a
Import Analysis Services 2008 Database project to import the AS database to the project, and then change the database name following the steps below.
Right-click the project and select Properties.
Go to deployment option on the left pane.
Change the Database name.
Then deploy the project to Analysis Services server. The screenshot below are for your reference.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

WDS Server Service won't start - 'An error occurred trying to start the Windows Deployment Services Server.'

I'm having issues installing starting the WDS server service on Win 2008 R2, this is happening on multiple (all 2008 R2) systems on this domain so I'm beginning to think it's either AD or network related, in event viewer I get the following error.
'An error occurred trying to start the Windows Deployment Services Server.'
Error Information: 0x0906
EventID : 257
single domain, single forest, 2008 R2 functional level, both system are virtual plugged into same vswitch on a flat network.
any ideas what might be the issue? I've never had an issue getting this working on many occasions before today and I've come to many a dead end looking at other articles thus far...
With WDS tracing enabled I get the following error information:
[4304] 09:22:11: ===>Starting logging of module [WDSServer]
[4304] 09:22:11: [UDPPorts] Policy: 1, Dynamic Port Range: 64001-65000.
[4304] 09:22:11: [RPC] Using Tcp Port 5040 for Rpc Calls.
[4304] 09:22:11: [RPC] Client Impersonation Logging=Disabled
[4304] 09:22:11: [RPC] Host Name: sccm.domain.local
[4304] 09:22:11: [RPC] NTLM/Kerberos Spn: ldap/sccm.domain.local
[4304] 09:22:11: [RPC] Initialized
[3756] 09:22:11: [RPC] Server Started.
[4304] 09:22:11: [BINLSVC][RPC][Ep={5F4FB9F0-C0E3-41C1-AA00-9A7C690AC3A3}] Registered
[4304] 09:22:11: [BINLSVC] Provider Initialized.
[4304] 09:22:11: [WDSDDPS][RPC][Ep={FA0A27E1-C2BA-4B3B-94B2-025E82FFAA6D}] Registered
[4304] 09:22:11: [WDSDDPS][RPC][Ep={011D24AC-CB3A-4739-A339-5D2E1B5306CE}] Registered
[4304] 09:22:11: [51][WDSDDPS] [d:\w7rtm\base\ntsetup\opktools\wds\ddp\server\ddpprovider.cpp:196] Expression: , Win32 Error=0x906
[4304] 09:22:11: [WDSDDPS][RPC][Ep={FA0A27E1-C2BA-4B3B-94B2-025E82FFAA6D}] Closed
[4304] 09:22:11: [WDSDDPS][RPC][Ep={011D24AC-CB3A-4739-A339-5D2E1B5306CE}] Closed
[4304] 09:22:11: [d:\w7rtm\base\ntsetup\opktools\wds\wdssrv\server\src\wdsprovider.cpp:144] Expression: , Win32 Error=0x906
[4304] 09:22:11: [WDSDDPS] Initialization Failed (rc=2310)
[4304] 09:22:11: [d:\w7rtm\base\ntsetup\opktools\wds\wdssrv\server\src\wdsprovhdl.cpp:172] Expression: , Win32 Error=0x906
[4304] 09:22:11: [WDSDDPS] Deleted.
[4304] 09:22:11: [d:\w7rtm\base\ntsetup\opktools\wds\wdssrv\server\src\wdsservice.cpp:178] Expression: , Win32 Error=0x906
[4304] 09:22:11: [Udp] Listen Shutdown.
[3756] 09:22:11: [RPC] Server terminated (rc=0)
[4304] 09:22:11: [RPC] Listen Stopped.
[4304] 09:22:11: [BINLSVC] Shutting down
[4304] 09:22:11: [BINLSVC][RPC][Ep={5F4FB9F0-C0E3-41C1-AA00-9A7C690AC3A3}] Closed
[4304] 09:22:11: [BINLSVC] Deleted.

It seems I've found out the solution myself, the issue seems to be caused when DHCP and WDS are on the same server, The installation must identify this during the first installation of WDS but not on subsequent installations, the method to
get it working again is:
1.
Install WDS Role (using defaults)
2.
Make the following registry change:
HKLM\SYSTEM\CurrentControlSet\services\WDSServer\Providers\WDSPXE\UseDhcpPorts = 0
3.
Run the following command line to initialize Windows Deployment Services:
wdsutil /initialize-server /reminst:D:\RemoteInstall
4.
Run the following command to enable the DHCP port registry setting
wdsutil /Set-Server /UseDHCPPorts:No /DHCPOption60:Yes

From report server database how to know reporting services server

from report server database how to know reporting services server
Thanks

Hi Ajay,
If I understand correctly, you want to know
Reporting Services server name based on report server database. Based on my research, I find that the Reporting Services server name is the computer name which install the report server. So we can try to click Start button, right-clicking Computer,
and then clicking Properties. Under Computer name, domain, and workgroup settings, you can find your computer name.
Besides, the report server database is a SQL Server database that stores the following content:
Items, Subscription and schedule definitions, Report snapshots and report history, System properties and system-level security settings, Report execution log data, Symmetric keys and encrypted connection and credentials for report data sources.
For more information about report
server database, please refer to the following link:
http://technet.microsoft.com/en-us/library/ms156016.aspx
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine xiong
Katherine Xiong
TechNet Community Support

DistributedCOM errors from Reporting Services server on Primary

I have a SCCM 2012 SP1 CU4 environment with a dedicated Reporting Services server next to my Primary.
On the primary i see in the system event viewer every hh:31 2 alerts and every hh:01 about 15 alerts and i can't find how to stop these alerts. The SCCM environment is working properly, als reporting is working properly..but how to solve these erros in my
system event log on the primary server.
Below the error:
The description for Event ID 10009 from source Microsoft-Windows-DistributedCOM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
<reportingserver fqdn>

Hi,
Please try the troubleshooting suggestions the following TechNet article provides.
Event ID 10009 — COM Remote Service Availability
http://technet.microsoft.com/en-us/library/cc774368(WS.10).aspx
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

OWSM how can i get user credentials from gateway in web service server

I need username in web service server. Gateway has option like "Insert WSBASIC Credentials" and service definition in gateway has "forwardcredentials" option. how can i use these options? has some any idea or sample code.

Hi Surya,
You asked whether there are any other solutions other than JavaBean.
There are ..
It is a round about way. But should work good on WEB. This is particular to MS things.
As you know you can use vb scripting to invoke all of this Ms things on WEB. So the trick is have a dynamic page called with your actual doc name as a parameter. Script and do whatever you want in this Dynamic method. And from within Forms call this Dynamic page using WEB.show_document( remember within Forms I can call any WEB viewable doc ). It should do the job.
But ( And that is a big but...)..
You need to take care of lot many things here.
You must have a app server which would support scripting like VB. And you must have MS OFFICE in the server . I understand this works best with 2000.
So finally it boils down to what I need and what I have. And Yes It requires a good effort.
Great going??? :))
Good Luck
Vijay

Is there an issue connecting to the web services server currently?

Keep getting an errror, "problem connecting to web services server" This used to work fine. I tried turning off web services and it allowed me to, but now I can't re-enable them.

Hi Pirmin87,
There was a known brief outage a few days ago that could have resulted in this.
- http://status.businesscatalyst.com/
However at the moment everything should be connecting fine. If still an on-going issue please reach BC direct chat support for further investigation.
- http://helpx.adobe.com/contact.html?product=business-catalyst
Kind regards,
-Sidney

Service failure on Shared Services server

Similar Messages

Maybe you are looking for